Mark takes in an ITT / KB record player (model KP036) in need of a complete restoration. Part 1 is the teardown, case refurb, and re-plating the fixings.
Пікірлер: 119
@EricTViking2 жыл бұрын
If someone would have told me that this evening I'd sit in front of the computer, and watch a video of a bloke wallpapering a record player, I wouldn't have believed them.
@robertogarcia5839 Жыл бұрын
I really like this Phill Collins of electronics. He certainly knows his stuff. I'll keep on watching and learning of his videos. Thanks for sharing your valuable knowlege.
@hernancoronel Жыл бұрын
he really does look lke Phil! Since he does woodworking and milling/lathe work as well as electronics I am waiting for him to take out the drums and play some songs one day LOL!
@jeffc219015 күн бұрын
@@hernancoronel Mark plays the guitar, so it wouldn't surprise me if he could play the drums too. He's really a Jack of all trades!
@freednighthawk8 ай бұрын
Hey Mark, when trying to back fill ply that's peeling, dampen the wood with water or Isopropyl Alcohol. It helps the glue wick into the gap better.
@hmbpnz4 ай бұрын
I hope that your channel explodes in popularity, because this is the stuff we all want. Thanks so much for bringing us into your workshop.
@goldCrystalhaze7 ай бұрын
I am amazed by the span of knowledge you have, you have a fantastic workshop with everything I could ever imagine and ,most of all, you are a wonderful person. I really enjoy your videos, I feel like spending time with my best friend, doing our hobby and enjoying our day! Thank you so much!
@scottdaniels4171 Жыл бұрын
I know this is an older post - but I have had good success thinning wood glue, then using various size syringes to force glue farther into cracks like this. Oh - and "hi" from north Georgia! I am an EE for 35 years and really enjoy your videos.
@cmonkey632 жыл бұрын
In anticipation of the next segment, I once 'serviced' my parent's hi-fi turntable when the the grease turned to glue. The device dated back to the early 60s. I had all the parts laid out on newspapers in the lounge room. Cleaned it all up, added new grease, and magically put all the bits back in. It was a "don't tell Dad" experience.
@derekstryjski68096 ай бұрын
Love your videos, Mark. Keep up the good work. Best wishes from Scotland
@dr.volver Жыл бұрын
Вы очень всесторонне развитый и талантливый человек.
@madtopp2 жыл бұрын
i am surprised the speaker foam ain't gone kudos for the re-plateing and keeping the originality..the new covering looks great to
@theoloutlaw2 жыл бұрын
Great job Mark. You have to love the good ol' BSR mechanism. Very simple, very effective, cheap to manufacture, and brought many enjoyment into peoples lives. These old timers are a delight, and while they are probably not worth a lot of money, there is something about them that to me shouts 'Genius'. While they were made to a price point, you still have to love the quality when there is so little involved. Marvelous stuff.
@clivewiddall34307 ай бұрын
You’ve got one hell of a workshop. I want one!
@anthonydenn43452 жыл бұрын
Nice job. Those dome inserts will look great when fitted. I remember we had an old bsr record player bitd. Built to last those things.
@petersopacua9349 Жыл бұрын
Beautiful restoration project , and it,s a nice suitcase recordplayer/changer !! good job Mark !! , greetings from Assen in the Netherlands !
@ericBcreator4 ай бұрын
Awesome job! I've been watching a lot of your videos (while playing on my practice pad - I'm a drummer) and you're a great tech / restorer!
@Rudi-Mhz7 ай бұрын
Awesome Job done Mark ! The Details you witched into this Piece are so kindly made. 👍P.S. the green Cone Material is a classic Paper for old Chassis.
@johnmarchington3146 Жыл бұрын
Another great video. Your workmanship is incredible.
@Badger_Watch424 ай бұрын
Fuck me that looks good. Mark is a proper legend. He's the FINAL BOSS of restoration andrepair!
@mcmeikel002 жыл бұрын
Es macht einfach Spaß zuzusehen, man lernt nie aus.
@marcj89992 жыл бұрын
Yet another great video Mark. A tip I'd like to pass on to you is to keep a roll of kitchen grease proof paper handy, pop some over the clamp pads and no more clamps glued to your work ! Also is there any chance of a workshop tour as a future episode perhaps ? The workshop looks so fascinating. All the best Marc.
@ianhuxstep211 Жыл бұрын
Great video. I am slowly going through your others. I have been in the electronics repair profession for over 50 years and still learning, being semi-retired but still dabble. I see you struggle to get knobs off, my father taught me a technique, using 2 pieces of string or wire you loop both under the knob opposite to each other and pull the loose ends with each hand.
@rastaman5105 Жыл бұрын
Very good works to restore that beautiful recordplayer, greetings from Assen in the Netherlands , and i like youre repair and restore video,s !!
@raceingdemon6464 Жыл бұрын
Lovely Work Mark Looks Like You Have All The Gear And All The Ideas Great Stuff !! Regards mike.
@kendom332 жыл бұрын
Thoroughly enjoyed this video. Very interesting and informative
Electroplater, machinist, wood finisher, motor winder, electronics designer and repairer.
@raatroc5 ай бұрын
Clock maker, plastic molder ... what not?
@jimsimpson10062 ай бұрын
And with a good appreciation of aesthetics, too. That case looks very nice!
@TheBudgie292 жыл бұрын
Hi Mark, When do we get to see Part 3?. I watched this one and the Turntable one. Now waiting for the Amp, and finishing touches. Thanks for sharing. You are getting to be My choice of Relaxing watching (with a coffee) after 12 Volts. Keep Em' Coming.
@MendItMark2 жыл бұрын
Part 2 will be uploaded for viewing tomorrow. Thanks for watching!
@postoronniym2048 Жыл бұрын
Great job! Truly a work of art.👍
@hahanah14632 жыл бұрын
superb job mark
@AnthonyCallender-jw2rx Жыл бұрын
I enjoy watching you work
@TheNewHights Жыл бұрын
Hey mark great video! Thanks for the tips and tricks
@fabriciobentodasilva2871 Жыл бұрын
Ficou muito ótimo show de bola 👏 parabéns 👏
@jameskolar9655 Жыл бұрын
As ever, brilliant! Thank you.
@stewartwebb56992 жыл бұрын
You have the patience of a saint
@kenrobertson90484 ай бұрын
Great video, When im doing a small job with the clamps and dont want the glue on them i use a bit of grease proof paper between the clamp head and the piece im glueing. The glue should not stick to the grease proof paper.
@colindixon8069 ай бұрын
Hi Mark, as a retired electronics engineer, I love your vids. Would love to have a tour of your workshop inside and out and what town are you based out of interest??? Colin
@martins51742 жыл бұрын
You have too much fun !
@HAL44009 ай бұрын
Absolutely excellent 😮❤
@loricastro37722 жыл бұрын
Nice channel and video! Thanks a lot for share.
@claretlover1 Жыл бұрын
Superb, made me late for work!
@Mike-z9m11 ай бұрын
Great, much enjoyed.
@highpath4776 Жыл бұрын
had one of these for a while, passed it on to another collector
@martinoakley665111 ай бұрын
Fantastic job Mark. Rexine is not easy to work with. Are you the UK's answer to David Tipton with this restoration!!
@ossianhaufe4671 Жыл бұрын
Nice, you restore devices like this with love. What about your lungs? They sent alarm signals out and request you to use a mask for protection. You have to set all viewers to a good example.
@Christophers-Assorted-Stuff Жыл бұрын
Some of your tools and machinery I have never seen before, such as the block for doming the metal discs, I expect it is very expensive.
@MendItMark Жыл бұрын
The doming block and punch sets are on Amazon. The smaller sets are not too expensive.
@pablobaldomir94305 ай бұрын
Alguna vez reparaste un cinta abierta? , saludos
@davidcannon11442 жыл бұрын
can i have your workshop please
@michaelcarey Жыл бұрын
I had a bit of a panic attack at 23:32. Looks like you leaned over the still spinning buffing wheels... but it was probably more of a sideways movement.
@anilhettiarachchi3090 Жыл бұрын
you reminds me great singer phil collince
@RockinJohnny6 ай бұрын
Did you ever work in Mallinsons in Linthwaite, Huddersfield? If you did so did I we were mates
@paul11532 жыл бұрын
Hello Mark, was there a date code anywhere on the record player?
@MendItMark2 жыл бұрын
Not that I could see. The factory label wasn't filled in, unless that is someone's signature? You can see it at 2:00 in....
@panther1053 ай бұрын
Silly me thought maintaining and refurbishing the original finish and fabric would be paramount....
@johnwakefield31419 ай бұрын
I didn't know phillip collins was an electronics engineer.
@leighdurrant9116 Жыл бұрын
Usually a Golf ball filler to Pea size hardener
@Christophers-Assorted-Stuff Жыл бұрын
I have been trying to find rexine for ages, where can I find it? Back in 1970 I could buy it in my local hardware shop, my dad used some on a radio he made which was styled on a Roberts model.
@MendItMark Жыл бұрын
I get it from www.retrospecialist.co.uk If I spelt it wrong, just Google dansette rexine.
@Christophers-Assorted-Stuff Жыл бұрын
@@MendItMark Thanks, I found the place, is any of their material suitable for re-covering a Roberts Revival 250 type cabinet - something that can be bent around the rounded corners?
@pablobaldomir94305 ай бұрын
Parece de los años 60'
@barrypritchard2306 Жыл бұрын
Hi I justed watch you use same wood filler there is a better a better way get same sawdust keep it in a jar and when you need to fill a hole use a small amount of the sawdust with same PVA glue mix it the fill the holes or marks .
@pablobaldomir94305 ай бұрын
I la parte mecanica se ve mui solida
@aliisk6575 Жыл бұрын
👍👍👍👍 Süper
@enriquebarneseznarriaga3298 Жыл бұрын
👏👏👏
@motoflyte Жыл бұрын
You should fix some 80s yamaha keyboards
@ibrahimkocaalioglu8 ай бұрын
you could have started with a copper sheet
@pablobaldomir94305 ай бұрын
Lo mismo qe el amplificador
@stephensomersify Жыл бұрын
OLD STYLE = No gloves, no safety glasses, no masks and no mamby pamby nitrile gloves Goodonya -old git, UK
@dDAMKErkk Жыл бұрын
🥹🥹🥹
@akella7282 жыл бұрын
why paper? there are many types of woodlike films or vinyl. they are scrachproof
@ALEX00XX2 жыл бұрын
+++++
@EpRoos5 ай бұрын
Is there anything you have no skill in?
@davidvivian5965 ай бұрын
Hi Mark, a lovely, interesting video as usual. I starting working for ITT/KB as a Sales Rep during the late 1970s, but I don't recall this particular model. BTW, KB stands for Kolster Brandes which was, I think, the German electronics company which bought out KB. The first model of record player I recall, was the KA1026 which probably replaced the KP036. Happy days.
@jhareng2 жыл бұрын
Nice work again, look forward to part 2. Hard to believe by 1977 BSR made 250k units per week of which 90% was export. Another sad loss for the Black Country in Rowley Regis and Wollaston 14000 jobs lost by 85.
@madtopp2 жыл бұрын
just like everything lost in the black country all the fantasic item we once made
@jwades77 Жыл бұрын
is it sunrise medical at the old BSR plant in wollaston still, i worked there way back.
@tusharparte3205 Жыл бұрын
You are very capable and doing all this with such happy energy.
@ferraridinoman Жыл бұрын
Now come on Young Mark! Large CBS Headstock Maple necked Stratocasters are NOT cool!!! Come on!! ha ha!
@Si1983h8 ай бұрын
I’ve a very similar but slightly older Bush record player along with a separate powered extension speaker in the bottom of my wardrobe awaiting restoration… it’s in a queue behind a load of Linn and Naim kit though and has been for three and a half years.😂
@1969longshanks2 жыл бұрын
Incredible workmanship
@skydiver19845 ай бұрын
could watch him all night, many greetings from blackforrest Germnay
@newme3835 Жыл бұрын
No paras de sorprenderme, gracias por compartir 🙌🙌🙌😁
@nathkrupa34634 ай бұрын
Great engineering 👍
@marlenestockton2269 Жыл бұрын
What a wonderful work shop...
@hi-tech-guy-182311 ай бұрын
Get a Handheld CO2 Laser 20W 500W 2000W (Cleaning mode is like Reversing time) They are Very good At Restoration work
@martinlegg647311 ай бұрын
Hi brilliant channel, very interesting, how can I get in touch to repair my Sony walkman WM D-6C. Thank you Martin
@vidwatchman8 ай бұрын
Where do you find rexine?! I can find faux leather and stuff that’s too thick but not rexine. Not on Amazon anyway.
@Ea-Nasir_Copper_Co3 ай бұрын
Rexine was apparently created as a cheap alternative to leather. Nowadays it costs twice as much as leather. The past is a foreign country.
@gavynswale30694 ай бұрын
Do you have any videos on a columbia 360 model 526 restoration or maintenance?
@martincook31810 ай бұрын
Mark there is a lot of Money to be Made from buying and Restoring and Selling these old Machines on and you could Make a Fortune from doing such a thing
@pedrojintan74074 ай бұрын
what material you had used to cover? Tolex? Thanks
@ecc84 Жыл бұрын
Little tip next time you are taking rexine off lift a corner with a knife and get a small paint brush and some ipa and run it under the rexine, it will soften the glue enough to pull it off, you just need to keep going with the ipa as you go along.
@MendItMark Жыл бұрын
Thanks for the tip. I’ll give it a try on the next one. I’ve just stripped a Bush record player, and it was a lot of hard work!
@valdirdeaguiarlima72418 ай бұрын
Hi! Are there any other episodes for this restoration? I wasn't able to find it. 😮
@darrenwendell1723 Жыл бұрын
The Chemist......you know your stuff.
@bobharrison2212 Жыл бұрын
Use car body filler on places u cant see its cheaper :)
@SkyTechElectronics Жыл бұрын
Miles O'brien is real! 0_0
@pablobaldomir94305 ай бұрын
El parlante se veia bien
@kaushikchatterjee91372 жыл бұрын
Fantastic job.🙏🙏🙏🙏
@vincentguyot30295 ай бұрын
Made in Finland?
@janinapalmer8368 Жыл бұрын
Where did you obtain that old style Rexine covering ? It's IMPOSSIBLE to find in Australia...
@janinapalmer8368 Жыл бұрын
With the popularity of the old record player why don't you make them ... I reckon you could ... you have a fab workshop ...
@twanaclash66044 ай бұрын
good
@suntexi Жыл бұрын
Paul Kemp I had one of these when I was 15 in the mid '60s. It was a good little record player. Mine was red and I remember the colour of yours was known as avocado, I think. You could get bathroom suites in the same colour. I think there was a sickly yellow option too.
@RonyMiah-j6j11 ай бұрын
@joseneves7945 Жыл бұрын
boas amigo muito gosto ver o seu de profecional do sei trb, eu ao sei lado sou um aprendiz, tb arranjos aparelhos mas dame gosto de o ver sei e vejo que é mestre disso , sou Portugues ok abraços
@anthonylawrence60 Жыл бұрын
its easier to just unclip the motor rather than cut the cables