Mercedes A-Class W169 and B-Class W245 instrument cluster display replacement

👨‍🔧 This tutorial shows how to repair the instrument panels of Mercedes-Benz A-Class W169 / C169 and B-Class W245 and replace the fading or dim LCD screen with Minitools display SEPDISP08-7V. With Minitools display and following this DIY tutorial you’ll find out how to fix Mercedes B-Class and A-Class dashboards with display screen not working, no matter if the voltage is 7V or 8V, as it is detailly shown how to regulate it to install the new display correctly.
🔧 Tools and spare parts useful for this repair:
• Minitools replacement LCD display for Mercedes W169 and W245 speedometers SEPDISP08-7V store.minitools.com/en/sepdis...
• Minitools pry tool SEP-LEV01C store.minitools.com/en/trim-r...
• Minitools large gauge faces protective disc SEP-PRO01A store.minitools.com/en/sep-pr...
• Minitools small gauge faces protective disc SEP-PRO01B store.minitools.com/en/sep-pr...
• Minitools steel probe with flat curved tip SEP-PUN03 store.minitools.com/en/sep-pu...
• Minitools shim for re-assembling needles SEP-INS03 store.minitools.com/en/sep-in...
• Soldering station with accessories SEP-KITM02A store.minitools.com/en/939d-s...
• Kapton tape SEI-KAP-TAPE store.minitools.com/en/sei-ka...
• Solder wick SEI-TRE2B store.minitools.com/en/sei-tr...
• Tweezers with fine tips SEI-MTQ-12 store.minitools.com/en/sei-mt...
• Safety dosing bottle for solvents SEIJL-40 store.minitools.com/en/seijl-...
• T10 screwdriver;
• Multimeter;
• Hot air desoldering iron;
• EEPROM programmer with SOP-8 test clip.
📌 For more information on spare parts useful for repairing instrument clusters, infotainment systems, car radios and sat-nav, go to store.minitools.com
#mercedes #mercedesaclass #mercedesbclass
0:00 Intro
0:20 How to disassemble the dashboards of Mercedes A-Class W169 and B-Class W245
0:59 Mercedes A-Class and B-Class speedometer LCD screen replacement
2:04 How to measure the voltage on Mercedes-Benz B-Class W245 and A-Class W16 / C169 instrument clusters
2:41 How to desolder the EEPROM 24C04 or 24C32 from Mercedes W169 and W245 dashboards
3:00 How to modify EEPROM parameters to adjust the voltage and the display contrast
4:22 How to solder back the EEPROM on Mercedes A-Class W169 and B-Class W245 instrument panels
5:13 How to reassemble Mercedes-Benz W245 and W169 dashboards
5:48 How to switch on Mercedes A-Class and B-Class on a test bench

[@MinitoolsChannel]

Replacement display for Mercedes A-Class W169 / C169 and B-Class W245 available at the following link store.minitools.com/en/sepdisp08-7v-mercedes-class-a-b-lcd-display.html

[@vladito80]

Shit!! And youall say i should do this at home, by myself... Ufff noo w😂aaaaayy

[@MinitoolsChannel]

​@@vladito80 We do realize it’s one of the most difficult DIY repairs as it needs programming and soldering experience, but it’s not impossible! We know that using an EEPROM programmer may be difficult for somebody without programming experience; however, as we provide step by step instructions on how to use it for this specific instrument cluster, it’s not actually that hard! Soldering may be a bit tricky, but if you’re interested in getting a bit of knowledge about it you could look at this video kzbin.info/www/bejne/qaCnhqGLrr-Mrqc

[@PureVoice_cz]

Perfect, thank you❤

[@holinzski]

Dear Sir! Please help me. The tachometer of our B-Class W245 car, made in 2005, is lying. Sometimes it shows more, sometimes less, but sometimes it stays at zero and does not move. Where should I look for the reason why hpol is showing so much and so much? What could be the most likely reason. Possibly a soldering error? Or could a contact be faulty? Thank you very much in advance for your kind help! Best regards, János bohus

[@MinitoolsChannel]

Hi, could you please send us an e-mail at [e-mail] with your enquiry, attaching picture of the instrument cluster and explaining the issue? Our technical assistance team will look into it and get back to you. Thank you

[@PureVoice_cz]

Just where will I find the calculator?

[@MinitoolsChannel]

Hi, you can find the calculator opening the PDF below the product description, at the following link store.minitools.com/en/sepdisp08-7v-mercedes-class-a-b-lcd-display.html

[@ralgor100]

Why not use a resistor instead?

[@MinitoolsChannel]

Hi, because adjusting the voltage using a resistor is not as accurate as the method shown in the video.