in this video is shown how to replace front brake pads on mercedes cla200
Пікірлер: 15
@liviuchircu2 жыл бұрын
Thank you, especially for the greasing part! To retract the piston, I used a small screw press instead (not sure how to call it). Worked like a charm, the new Brembo pads are better than the OEM I took off!!! PS: for the rear axle, one extra step is needed, to retract the E-Brake - watch other videos to learn how to do it!
@PTGjasper5 ай бұрын
Do you know what the specs are for the bolts at what tightening torque it must be I can’t find it any where!? It’s for a W176 A180 2014 the brake pad calipers en break disc
@liviuchircu5 ай бұрын
@@PTGjasper for me, the W117 CLA 200 requires 130 Nm of torque on each bolt. This is written in the car's manual, see the Tyres/Wheels section or similar.
@iulianaugustin93712 жыл бұрын
Salut,Vad ca ai móntat placute de frana Texar. Ce recomenda Mercedes? Trw sau Ate . Multumesc frumos
@mechanicigor2 жыл бұрын
Both are very good quality
@geemoeentertainment95235 жыл бұрын
So no bleeding brakes?
@mechanicigor5 жыл бұрын
Don't need to bleed because you don't open nothing where is hidraulic liquid
@geemoeentertainment95235 жыл бұрын
Ok thank you
@vladimirfrank10345 ай бұрын
It’s cool, of course, he did almost everything with one hand. But where is the ceramic or copper paste? And where are your gloves?
@mechanicigor5 ай бұрын
Why do you need gloves
@appiegumussu3 жыл бұрын
2:00 BURP
@carnutal36276 жыл бұрын
Wouldn’t want this guy working on my car. First he just lets the caliper dangle from brake line. Then he cleans nothing. Should have cleaned the pad holder and pins before putting grease on them. I never saw anybody retract the piston that way using the rotor as leverage. What else did I miss! Yikes get that Benz out of there. 😱
@mechanicigor6 жыл бұрын
This video is tutorial for enthusias with basic knowledge and tools how to do it yourself and be proud that they replaced brake pads and if you think the brake caliper need to be cleaned try your self and take the car to the high way and brake couple of times at 120 km per hour and check how clean they are
@leonarddonson1855 жыл бұрын
according to me he did good job without some expensive tool and show that anyone can change instead of paying a lot of money for half hour work
@vladimirfrank10345 ай бұрын
Круто конечно, почти всё одной рукой сделал. Но где керамическая или медная паста? И где твои перчатки 😂 It’s cool, of course, he did almost everything with one hand. But where is the ceramic or copper paste? And where are your gloves?