Mercedes Cls63 M157 Cold Air Intake Upgrade! (Not what I expected!)

In this video we will be swapping out the stock intake with a Blackboost Intake! Watch till the end for the final verdict! NOTE: I reached out to the company and let's say customer service is not the best!
Blackboost Cold Air Intake
Cls63amg Intake
Email: [e-mail]
Disclaimer:
Due to factors beyond the control of Foreign Werks, I cannot guarantee against improper use or unauthorized modifications of this information. Foreign Werks assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information AT YOUR OWN RISK. Foreign Werks recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Foreign Werks, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Foreign Werks!

[@PoonFlavoredTang]

Have the blackboost intakes and like them quite a bit.i feel like top end definitely has some gains. Low end (1-3rd gear) you likely won’t notice much because of the torque limits in the tcu.

[@t.savannah8180]

Thanks for the review giving us Mercedes-Benz. CLS platform guys a better understanding of the black boost more in depth These intakes are not cheap. I wouldn’t worry too much about the license plate, but at least they could have gave you badging on the intakes themselves.

[@Fwerks.1592]

It’s March 2024 and blackboost has not sent me anything yet. I’ve emailed them numerous times, so I decided to give up. I don’t think I will ever receive the badges on both boxes. Thanks, I appreciate your feedback!

[@GoldenEagleXTND]

Also, I hope youve done the oil pump solenoid mod unplug! Best thing to do to any Mercedes that has it 👌🏼

[@Fwerks.1592]

Interesting! If you can shed more light I’d really appreciate it! New to the M157 platform lol

[@GoldenEagleXTND]

@@Fwerks.1592 So there is a solenoid in the Oil Pump that restricts flow/pressure to essentially only allow full oiling in the engine to occur 1) on start-up and 2) over 3500RPM. Given the ECU/TCU is designed to keep RPM low and shift points "granny" shifting you almost never get full oiling. Now, what does the solenoid prevent form getting oiled in almost all fcaets of typical driving? The oil squirters under the pistons, the VVT train, etc. So you may have experienced the lurch/surging of the car when accelerating form either a low speed or from a stop when you're in S/S+/M drive modes.. unplugging the solenoid eliminates that. It also means you're getting full oiling across the RPM range so your cylinders are actually getting lubricated, in theory helping the cylinder scoring issue prevalent on this engine. What it verifiably helps is keeping the engine cooler. I'm sure you've felt the furnace like heat coming from the engine bay after parking your car? That temperature is insanely reduced from the mod because you're ACTUALLY using the oil system as intended, to lubricate the engine, and that oil then circulated through the oil coolant system, drawing that immense heatliad out of the previously unoiled engine block. It also improves throttle response, increases the free revving nature, and the RPMs are just smoother overall across the entire RPM range. Come join us on MBWorld forums in the W212 AMG section, it's an amazing wealth of knowledge and the most active community (that's helpful) for the platform.

[@GoldenEagleXTND]

All you have to do is unplug it and secure it out of the way btw

[@Fwerks.1592]

@@GoldenEagleXTND wow!!!! You’ve answered a question I was asking for months now!!! Yes that jerk initially on 1st gear! I spoke to many techs, talked to different CLS63 owners and they all reported the same symptoms! Tech all say that’s normal and “ we need to let the car come up to temp”! I would always throw it on manual mode to reduce the “jerky “ feeling. Also yes the engine bay gets incredible hot!!!! I’m definitely joining the forum group!! Thank you again for this helpful information! This is gold!

[@Bruce4lmighty]

@@Fwerks.1592Tasos Moschatos has 3 videos covering this and advises against unplugging the solenoid 👍🏻

[@emilsierra3309]

I agree! I have a 2012 153k miles for sale if you know anyone interested one. Had for 4 yrs and just ready for a upgrade. Definitely a fun car to drive.

[@Fwerks.1592]

153k miles? Interesting!! Any major repairs done to your amg??

[@emilsierra3309]

@@Fwerks.1592 major, only thing was the timing chain tensioner check valves started to fail. Had them replaced and all good. Normal wear items here and there. One rear CV Axle,, Turbo cooler lines, motor mounts thermostat, air ride level control block. Headlight module. Other than that, pretty damn reliable.

[@Fwerks.1592]

@@emilsierra3309 thats some good feedback! Any particular vehicle you’re looking into?

[@Fwerks.1592]

@@emilsierra3309 I forgot to ask you. Is your CLS tuned?

[@emilsierra3309]

@@Fwerks.1592 no it’s all stock. I have it on fb marketplace if you like to see it. Just move location to Panama City Florida

[@amarek454]

Limited options for the w212 m157. I love my BB intake and BB Catless DPs

[@michaelcastillo8458]

Bro be honest I’m literally have one that I might buy for me what do you think ?

[@amarek454]

I would buy it , I needed an upgrade to support other mods.

[@GasBrakeSim]

To bash a reputable company because they didn’t send you a license plate frame is crazy. Throwing their merch they gave you for free was disrespectful. Especially when you’re new to the m157 platform.

[@Fwerks.1592]

They didn’t send me this product free. I’m paying for this product. Just like every paying customer I’d like for the product to be in order. I’m entitled to my own opinion. If you want the merch I can send it over to you at no cost.

[@GasBrakeSim]

@@Fwerks.1592 you bought a product and because it didn’t come on time, you went into this biased . . Even before seeing any performance gains or losses, you said “this product sucks” … Like , you think someone at Blackboost was like “hey, let’s hold this guys package for 3 months to piss him off” .. took it too personal man. Also, intakes aren’t primarily for sound , so a sound comparison between OEM and Blackboost is almost irrelevant. . No, I don’t want the merch donation lol .

[@Fwerks.1592]

@@GasBrakeSim did I really say the product sucks? I said the price point is not worth it! Yes of course, the wait time was ridiculous, there were no plaques included and I still don’t have them after numerous emails to Blackboost USA. Why are you so upset though? I don’t know if you have an intake set, maybe it went well for you. But I am not a fan of this product specially their customer service! I do appreciate your thoughts though.

[@gasolara2002]

Yeah i say 3 months is not acceptable to wait for something they should have on hand.

[@Fwerks.1592]

It’s crazy! I emailed the guy again about the plaques that I’m still missing. He responded I’ll send you a tracking number shortly, a month later I’m still waiting.

[@dajerseyrat]

$1400 to reuse the same crappy cloth intake pipes?? You got scammed bruh.

[@Fwerks.1592]

Big time lol

[@63Abu]

If you want to sell them I’ll buy it off you LOL

[@SDMF5000]

HOT air intake.....NO thanks. Plus they're WAAAAAAAAY overpriced.

[@Fwerks.1592]

I agree with you %100! Now if the intakes were under $800 I would consider. There are actually way better intakes and different brands for Audi S- Lineup.

[@slotank]

It works if your tuned, i gained about 33whp on peak power and upto 70whp in other parts of the graph on the dyno....stock tune or maybe just a basic tune you might not see any gains but i saw some big gains on my car being tuned on e40. 60 to 130 time improved as well from a 7.3 to about 6.8s

[@PoonFlavoredTang]

@@slotankthis. Have to take advantage of it with a calibrated tune. Theres been documented gains in the top end.

[@kingbryant5673]

It seals against the hood and still uses the cold air feeds. I can guarantee the intake temps are the same as stock. Especially because of the water to air intercooler.