⚡️Mercedes ECU Engine Computer Reprogramming.

Mercedes ECU Engine Computer Reprogramming. USED or NEW ECU it can be reprogram on bench. In this video I will show how to clone or how the clone service is done on Mercedes BOSCH ME 9.7 ecu.This ECU Engine computer has 3 data files 1 MPC
2 EXTFLASH and 3 eprom.
Common problem for these Mercedes ECU to Fail.
If your Mercedes sometime starts and runs good and sometime dont want to start at all check the fuel pump relay in the rear fuse box the ECU should give out ground when cranking if it dont the ecu is faulty.
If you need this service done you can click the link bellow
karmanauto.com/product/merced...
#ECU #Vehix411

[@Mishrgy]

Thank you so much, that is the most clear video about reprogramming the Mercedes ECU,

[@alrifainidal]

thanks Mate well done . your video is the best I ever watch about the programming ECU .

[@elmessaoudi1638]

This guy procede slowly and nicely! Good job!

[@sollykhan2385]

precise, clear and to the point, without flaffing about, clearly a good teacher 😎👍

[@Daanswerkeys]

Learned so much in 15 minutes. Thank you.

[@markwatson2814]

Your video is greattttt, your explanation makes this looks easy, thanks

[@SwaGeZz]

Love this videos keep making these type of vid thumbs up 👍🏼

[@mohammedalmahawili8470]

Great JOB thank you for sharing such amazing work and information.

[@sollykhan2385]

Thank you so much for an AWESOME video, you're a LEGEND, 😇

[@thewizardsofthezoo5376]

That looks just so easy to do at home with stuff you find around.

[@BlueEyedStanger]

Beautiful👍 u did a good job bro

[@samuelsia6301]

Great video. Thanks for the tutorial guidance.

[@autoconnection7102]

Excellent video, Thank you

[@godwinanderson8102]

just love his teachings

[@Sam-sl6ib]

Most clearest videos

[@Nyck461]

Very nice video. Very informative.

[@mrtuning8743]

Thank you for a nice video. This is the best guidebook of educational videos I have ever seen. thank you very much.

[@smartchishaya1670]

Well done my brother,

[@vonek8051]

awesome video thank you for teaching us

[@WaiWaiSzeto]

Wow this is some high-tech stuffs.

[@dashtyATG]

That's awesome thank you so much

[@mrcarexpert20]

Nice video Thanks appreciate it

[@user-rj3ly1kn1w]

Thanks for provide very useful movie

[@mrpakravian]

Certainly The best explained video on internet Thanks Plz keep posting

[@darshanamunasinghe4947]

Good job thank you very much

[@nasserprof914]

thank you for explanation

[@zinouvar692]

Thanks for advis i love you brother

[@floranteatienza4589]

First of all thanks for your clear video presentation about hooking up the KTag and how to back up and save the file. Where I can buy original KTag new or used.

[@hangveasna7679]

Thanks you love you !!

[@alitehrani3415]

Hi thanks for the great video Do you use the original k tag or a a copy one?

[@train4905]

Absolutely superb sir.thankyou. Steve from the uk.

[@olegandriievskyi8885]

You can done with it without opening ecu with pcm flash and module 77.But nice video,good job!

[@HGEntertainmentTV1]

Thanks 👍

[@gabriela.7939]

Dear Boss, I see how good... Well, my question is, after a transmisor installed is necessary resetting or re programs the system? Also, i changed the transmission control plate (is electric parts) with the solenoids. I have to resetting the computer? Do you do performance job to ECU? 1999 Slk230. I ll be pending on it.

[@qaissabbas1237]

Thank you so much,but i wonder how you could writing without select Restore and cancel Backup selection!

[@floranteatienza4589]

Thank for your video presentation about KTag back up and writing the programming procedures. Just want to know how much the KTag and system requirement to install the program in computer desktop or laptop thanks.

[@sara78130]

hi men thanks for u vidoe this programer u buy from ebay or is orgnial one?

[@saffrazmohammed4]

Do you have any experience with ECU programming for engine swaps on Mercedes platforms? W203 or W211

[@nelsontimah1433]

Hello between k tag and kess which is good for a start if you want to buy one buy one

[@acebrownful]

Talk about messing someone up a little that commercial interrupted my learning lol damn it

[@mihaimoro4418]

Hello. Do you think the replacement will work without reprogramming on a Mercedes S320 2006? I want to mention that the replacement is a exact same model second hand and it also comes with two keys and immobiliser. Thank you !

[@pradipmali5337]

I want to learn ECU servicing, please guide about various jig's for ecu

[@PhenixEMS]

Hi can you reprogram the scania truck with Kess alien tech ? Thanks for your job 🙂

[@DVLZHAZE]

i'm trying to figure out the right adapter. which one are you using? (number14....)

[@DROXX2387]

Hi on ktag if I clone a ecu for my car 2008 Mercedes C300 what option would I choose on the w204 would I go with the C300 2009 Bosch me 9.7 or would I choose something different

[@hoanghiep9064]

can you explan more information about 3 file. what do they work for?

[@chrysa757]

Hello, I bought a 2000 ML320 and currently in limp mode due to previous owner replaced the original PCM/ECU. -my question to you is …without the original PCM /ECU can you program a new used PCM/ECU if yes, can you do it if I send it to you? Thanks!

[@macgyver5033]

I have a question what would happened if you swap the chips ? My look the same but different part number I have a 908 áutel I can’t use lol I would be nice if you can tell me if I can clone or reprogram a rebuild ecu

[@meayman1]

hi, from where u bought the adapters ?

[@fiandigital]

Hei mr.. please tell me what the black bolt in the middle of the cover ecu? air flow or what this....

[@gamerfoxz3304]

Very good video friend. But there is no other way a little easier to do this ..?

[@oudl5433]

I need to learn more

[@marcogomez851]

How hard it’s to find or reprogramming a 07 dodge sprinter 2500 3.5 v6 gas , my mechanic has my van for almost a year and every time I called him , he said the computer he ordered was the wrong one , and the dealer don’t make computers for that van , and it makes it harder to find the one that fits A this point Idk what to do , any help or advice would be great

[@partoems9376]

Hello, thanks for sharing the video.where can I get a ktag to buy?

[@jeyanthitherce7274]

Thanks sir training online KZbin

[@bergerberg5353]

The part number for a VW Phaeton ECU is the same as a Bentley Spur. Is it cloneable?

[@abhilashidukki9114]

Hi friend can you show me a detailed video of odometre KM programming using UPA USB Programmer

[@jorgetrula1462]

Dear, I need to replace an ECU on 2008 Audi Q7 4.2 FSI, the engine control module is Bosch MED 9.1.1. Ktagl do the complete job? read & write?

[@mohamedeljabri4970]

That's amazing. .you have all programing kit .. can I get all set like yours? Thank you so much for this effort

[@sollykhan2385]

The best kit to get are the 'RED' KESS and Ktag 2 separate programmers , however both are sort of 'cousins to each other, and work slightly differently, DO NOT buy the earlier 'BLUE' color versions, as they are crap, get the 'MASTER ' versions, NOT the 'SLAVE' units, comes complete with adapters and you do need to study up a bit on Ytube and forums to get the gist of how to do the work, best of luck, BLESS 😎

[@jonjon-nc5br]

Subscribed to your chanel. Thanks for sharing your knowledge. After doing this procedure of reading and writing the 3 data files, will the vehicle start up? Will the 3 data files contain the immo files or will that service need to be separately completed by an automotive locksmith.

[@jhunbanton7414]

No update for your question I also want to ask same question. thanks Also want to know if this can be use for heavy equipment like for detroit DDEC, Cummins, Cat

[@sollykhan2385]

no, no need to finish off programming at locksmiths or the 'MAIN STEALERS' as the data has been transferred over, 'cloned' from the original to the donor ecu. 🙂👍

[@gofastergofaster3392]

Hello friends ! I have a question. I have changed on a R classe 320 cdi an Engine Ecu because the original was Dead... Now the car start normaly but impossible to change the gearbox position... STUCK on P position...what Do you think ? The car stays a long time without battery and maybe the auxiliary battery could be empty or I must code the Ecu of gearbox because the engine ecu has been changed ? Sorry my english I'm French 👍 Cheers Guys

[@mmmk1414]

So this is for only Mercedes cars? Is there one of there that is universal for all cars?

[@abhilashidukki9114]

Sir What is the difference between KTAG 2.23 version and KTAG 2.25 version?

[@skiraf]

Can you change the Catalytic Convertor Efficiency Alarm Threshold?

[@aadamfarooq7465]

Can I use this device on other brand ecu like honda toyota or suzuki plz reply me its important?

[@davidvarela8739]

is it posible to add another key to the car .... my alfa needs the key to be done at factory and then the dealer tells the ecu to recognize it.......

[@ferraridrew76]

How much does this setup cost Does all the software come with it Where do the files come from Can it delete dpf through software Mercedes gl350 bluetec

[@7sky7sky7sky]

hey , Thank you for ur videos can tell me which certificate or degree u have ?? i want to learn this business can u guide me ? thank you in advance

[@jmbmwmiami]

I need your help, I want to buy K-tag or DIMSport Transdata, how can I talk to you, Thank you Mr.

[@nixon2329]

hello, i have a problem with the dump from the MPC564 and the EXTFLASH M58BW16DB.... your not have this dumps???

[@abdullbasitosman5070]

what if you selected backup to read only one time instead of three?

[@alvaroenriquez5837]

Very good, 1 question do you have to reprogram the keys for the car in order to start?

[@Bangaaarn]

i think he need to. the vin number doesnt change when he writing the files to the new ecu. the easiest way is to disable the immobilizer and use a good ecu with the same numbers. if the numbers is correct the checksums is correct.

[@alitehrani3415]

Was great How do you know where to connect the krag cables to read the ecu? What happened if u just switch eeprome? Do you know any book or anywhere we can get training to do this kind of work,,?

[@radio231d8]

Dose that program work with a 97 sl500?

[@laurentium510]

Hi if i want egr,dpf off how is procedure thank you

[@magrethepetro2705]

Hellow bro i am in Tanzania i want to know how to program all cars.. Thank you

[@user-pu1qf2kt7k]

Wher is this guy when you needed at All we can do is look at it we don’t have tools software or knowledge to do all this 😂

[@vehix411]

I'm here www.karmanauto.com

[@Shark-ye1yj]

But why not to solve the original ECU grounding issue instead of replacing it, i believe that would be more cost effective. Any how thanks for the good explanation.

[@malikcumpoterisdautoelictr2574]

Sir you ues urgnal ktag or clone

[@christianyotov65]

Hello, my Mercedes w202 C200 kompressor ECU has failed. I'm planning on to swap chip to new ECU. I've found new ECU, that differs from mine in only one field "HW', my ECU "HW" value is 48.99 and other is 39.97. Will that be a problem? I have also questions, what each field of this ECU means: "HM","HW","SW","Q01"? PS: ECU OEM number is A 028 545 78 32 and Bosch one is 0 261 206 570.

[@imthiyasmohmmed7595]

Hi it can be used in Indian and Chinese vehicle

[@Smudg]

What is the return time after receiving the faulty ECU? I have had bad experience with another company on a Ford Escape ECU, it took them 5 weeks to deliver and then it did not work. I only have this car and need the ECU back as soon as possible, hope you can help. Its a 2008 ML350 4Matic. Thank you

[@vehix411]

For Mercedes me9.7 Ecu it’s 24hr turnaround

[@littlereptilian7580]

Does the 12 volts come from the ktag itself? Or do you have another voltage supply?

[@gintautasgnt1470]

From KTAG adapter. You don't need another.

[@abdullbasitosman5070]

how did you know fp relay ground is a software issue and not a device ?

[@alonsodunit2064]

What about the w205 finding it difficult to program

[@hazimy15zr73]

Very faster program

[@samberg6779]

Where to get files if I don't have any backup.?

[@abdullbasitosman5070]

is ktag chinese you use on this video?which chinese website?

[@MuhammadBilal-qh3dc]

After did this car is start and work if yes make comleate video until car start so then we can sure this procedure is good because some people say car will not start

[@clevelandperson5413]

We're are you located I'm having same issue

[@syxxwilliams]

does it have a 06 w11 in there

[@abdullahalshaqsi4680]

Thanks Why you did not write dirctly for new one why you read it and save it firest

[@vehix411]

we had a costumer make a mistake he wrote ORIGINAL on new ecu and on original ecu NEW we couldn't revive it didn't have original

[@anikroy4357]

I want a ecu service maker. Please need to help.

[@thelife161]

I need that computer !When I gona ding it?

[@iki911]

Would the new ecu have the same vin number after programming?

[@vehix411]

Yes

[@endri15255]

is it possible to leave external flash from new ecu,i mean only clone eprom and pmc and flash to leave it stock?its possible for clone ecu to star the engine and run perfect?

[@vehix411]

Best way is to do with abrites fbs and vin transfer only

[@endri15255]

@@vehix411 k tag no?

[@noname-xc9ye]

Hello what if I don't have my ECU I sent out to a company they can't found it what do I do .

[@jaystallwood]

can i not just use the backup and restore function

[@villantiofficial]

bflash error code when erasing 7f-31-22, how do I fix 2014 cla

[@keohep6771]

Just a question, why not rewrite from the obd port?

[@vehix411]

Not possible to read or write all 3 files it’s security protected

[@oscarlunamerced916]

I need the number of the capacitor