Mercedes ECU programming | Restore lost data | No Original ECU

Don't let lost data stop you from programming your Mercedes ECU! In this video, we'll show you how to restore lost data and successfully program your ECU without the original data. Follow these steps to get your car running smoothly again.
Mercedes ECU Clone Service
karmanauto.com...
Mercedes ECU amzn.to/42uDJgY
Forscan amzn.to/3VT5m3R
Xhorse Multiprog amzn.to/3UcDjuO
CarProg amzn.to/4aMH67r
JBC Solder Station amzn.to/4aOdLJV
Liquid Flux amzn.to/3xubrtp
Mercedes ecu programming to the car when no original ecu present or original data is lost.
Mercedes Donor ECU Programming to Ignition Switch.
This service is for Mercedes ECU Programming when original ECU is lost or not able to read original key data from original ECU.
Missing original ECU need it programmed?
Original ECU is fried cant read keys out of it?
Bought a new or good donor ECU and were told not possible to get key programmed to it?
If you have original ECU with same part number as donor ECU and original ECU communicates then choose our Mercedes ECU clone service its cheaper this service is if no one cant get original key data out of original ECU.
These parts are required to mail in to us:
1.Donor ECU with same part number as your original.
2. EIS Electronic Ignition Switch from your car.
3. Key original key to your cars ignition switch.
What we will do:
1. We will virginize the donor ECU make it like new so it can be programmable.
2. Read KEY data and VIN from original car ignition switch.
3. Program original keys data from original ignition switch into renewed ECU.

[@mariadefreece3722]

How can we get a hold of you? My husband is trying to get his dad's Mercedes up and running.

[@vehix411]

Karmanauto.com

[@mariadefreece3722]

@@vehix411 thank you for the reply back!

[@yiannakosautomotivekeys2380]

*Always great videos. This procedure can also be done the other way around. You can write the engine ECU information to the EIS. There is a way where you can add the original key information to that data so you won't have to make new keys (using existing keys). All you need is the FCCID which you can get from the existing keys and as far as the password is concern you just make one up.*

[@CTAUTO-ym2pl]

loved this video! keep it up bro !

[@driverauto-m6r]

Hi Dan! Super job🎉

[@train4905]

Exellent😊

[@khalil547]

Super! Thanks a lot! Can we know what are the devices used to do the job?

[@kiimpoyy6253]

How about if you lost the ECU and is ignition switch what is the best way or What are options?

[@barthelemyadjei176]

Very good bro, Can you help me for how tools you youse , thanks

[@franknavarro3977]

Great video. Where can I take my ignition switch and ecu to get programmed to my vehicle? Please let me know. Thanks.

[@dipoalade3042]

Good job sir I will like the complete system I am reaching you from Nigeria.

[@abbshus7421]

Good job 🎉

[@youssefbentachfin]

Hi is there any course online where we can study programming in ecu please

[@user-ky7ty3ie1x]

Hi software do you use or recommend to this jobs

[@tomaszagatowski4094]

Is it possible sprinter 2016 Delphi rcd3. Which software do I need to purchase to do this .

[@tomaszagatowski4094]

I can't change the Vin do you have any ideas? I was adding the ViN number to the old reading and to the new one. The car spins the starter and cuts it off after a while.

[@asid731]

Can this be done on a 17.7.2? Mine is totally burnt.

[@rolando4406]

How do you program a donar ecu for a 2008 Mercedes Benz R320 (Diesel) that the original ecu burnt out?

[@marktirabassi7160]

What software are u using on your computer. ? I'm not buying Autel products

[@nikolayjeleapov7470]

Greate video !!! Mercedes w211 e270 The old original ECU and EIS is mising , i have new one ECU ,EIS ,ESL and already installed in car , it works but the VIN is wrong. Can I change the VIN in these blocks to the correct one? I can read dump *.bin frome ECU and EIS

[@Stang773]

Can you program the shifter on a 2005 SL500? I need to replace my shifter. I have another used shifter

[@choleaoum1383]

Out of curiosity, is it faster to desolder the 8 pin immobilizer chip (I think It was a ST95256) and put it on the new board? Are there any other benefits with the method in the video?

[@HETPEZB]

What if the information was corrupted on it?

[@christiankelechionyeiwu2]

Hello, How can I purchase the software to program ECU

[@vehix411]

There’s different software it all depends on what ecu is it

[@getatmefam73]

I have a 2011 cl550 coupe. Can you help me

[@omegaopel31]

👏👏👍

[@jamealroberson8990]

Where are you located at

[@vehix411]

Portland oregon

[@soptea]

Nihil sine ABRITES !

[@gabriel50able]

How can I contact you ?

[@vehix411]

Karmanauto.com

[@abk-autohexzakari4006]

Hello

[@bradfrancis8253]

I really need to speak to you please

[@crisfher]

I just want it know how to connect the wiring

[@vehix411]

Do explain what exactly you want