Mercedes front end suspension clunk noise FIX: Sway Bar Link E350 W212

[@isi_bensin09]

My 2011 E550 had been doing this since 2019... I have been explaining the sound to the service for years and they have no idea what the issue is. Thanks for the video. Now I can finally not hear the clunking sound!!

[@almighty9662]

What kind of service is this

[@MsJusna]

What is the solution to the problem

[@TanTran-gn6hj]

Short and to the point. Thank you!

[@KaliRanks]

Thank you so much 💪🏽

[@typhoon2970]

thanks iceman, good job

[@Deeontae0033]

Thank you bro!

[@Deeontae0033]

This video was confirmation for me!

[@MsJusna]

Need help? I got mercedes benz c, and it makes a clanking noise when I reverse out of my driveway however, the noise disappears when driving straight. Could this be the same problem?

[@inaleyc]

Same still trying to find out what is

[@Chris-of6xm]

I have the same problem when I'm slowly backing out of my driveway and I turn the wheel at the top to pull onto the street. Progressively worse over the past few months, subtle clunking or otherwise rattling noise, almost like the creaking sound in old building makes on a windy day. Anything you found out 6 months ago you can fill me in on?

[@jeremybardgett3850]

@@Chris-of6xmanything

[@Chris-of6xm]

@@jeremybardgett3850 passenger side drive axle

[@aytac_bjk]

Would you recommend genuine part ? And once replaced do i need to make wheel alightment ?

[@mikeicee]

Well make sure yours is bad, yes I tried Lemforder and it was garbage... I put the genuine part and I've been very very happy.

[@vnillachannel]

Thanks alot!! Big Like!

[@mikeicee]

Thank you Bro! :)

[@victormelo90]

Same issue one a c180 w204 from a costumer.

[@mikeicee]

Was it hard to find Victor?

[@p3terski]

perfect ! Thank you for sharing experience!

[@mikeicee]

Thank you too! I enjoy the comments and feedback Voodooevil666

[@chrismcintyre8173]

I have the same issue I think...could you help me out? Has the same noise as I your video but now it does it constantly without hitting a bump. Any suggestions? Thanks

[@leopladsri219]

I had the same issue on my 2004 CLK 500. My sway bar link was brand new both sides and it makes sound very loud crunk crunk from driver side. I thought it was upper and lower control arms so I changed them all brand new as well but the sound crunk crunk still on. It took me a while to figure out and found out that the upper connection of sway bar link on driver side was not tight so I tight it per specification and the sound went a way.

[@YasAki-xs6uq]

Change your d bush your sound will go thanks me later

[@gjmed33]

Hey Mike. Great video. Any recommendations on brand for replacement part?

[@mikeicee]

On this part go OEM because Lemforder is really low quality only 20K while OEM 100-200K

[@electechchannel3739]

How did you figure out it’s bad and which side?

[@Isaac14679]

Where did you buy these from

[@boyklove7416]

Got the same issues

[@mikeicee]

Itseasy to check even with the car parked with engine off. Dont buy the lemforder brand as they go bad in 20-30K miles while OEM go bad way past 100K miles in most cars.

[@amicoconley5108]

Only when I turn is when the noise starts

[@edwardmiller8794]

i have removed the sway bar links and the stabilizer. took a ride withpout them, still same bad sound(((

[@YasAki-xs6uq]

Change the d bush don't listen to this guy he don't know shite

[@aytac_bjk]

By the way i get some weird noise when going slowly in high speed bump only , i get noise like creak noise only at very high speed bump in front suspension what could be causing that noise

[@ThaRamboOG]

If your car has 100,000+ kilometers all Front suspension Has to be replaced

[@juicebox22a]

Hey Mike, Another great video. Did you have any play in your steering? My steering is sloppy, and not as tight as it used to be. The stab links are definity worn out so I ordered new ones today. Thanks!

[@mikeicee]

Did you check the tie rod ends?

[@juicebox22a]

@@mikeicee Not yet. I will when I get under the front and take some load off the suspension. I'll check for play. About six months ago I had the alignment checked and they said everything was tight.

[@fuffoon]

The whole front end is so simple and easy to repair. I pay mercedes because I'm lazy.

[@mariovasquez7235]

You forgot to mention which tools size to use

[@leopladsri219]

Some MB model, use 16mm or 17 mm wrench with 7mm wrench.

[@joelwehr]

He forgot to mention almost ALL of the important information.

[@martinmoffitt4702]

part numbers?? go Mercedes original equipment or who?? thanks looks E-Z!

[@tariqkhan-kiyani3948]

Just changed mine, but the noise is still there.

[@ThaRamboOG]

Try ball joints

[@leopladsri219]

I changed my both sides on 2004 CLK 500 and the crunk crunk sound came from driver side because I did not tight that good. Make sure it needs to be tight per MB specification. Now, I do not have that crunk sound any more.

[@joelwehr]

Bro, if you want to make helpful videos, make it helpful. This has about 1 out of 20 useful tips for this job. Also, you don't have to put both wheels up, just block the lower control arm and lower the car till the sway bar has no pressure. No likes here.

[@mikeicee]

Lol blocking control arms? Why too lazy to lift front of car?

[@Ismael-g6z]

Bro straight to the point 💯🫱🏻‍🫲🏼