Mercedes in Limp Mode? Transmission Conductor Plate Repair C-Class E-Class M-Class S-Class Sprinter

[@Mechani_Cole]

Check out the list below for everything you need to get the job done! - Auto Trans Conductor Plate & Connector & Filter Gasket Kit Replacement for Mercedes-Benz C-Class E-Class M-Class S-Class SL-Class Sprinter 4-PC Set - amzn.to/3PtbOez - iCarsoft 38-pin connector - amzn.to/3qSG0p3 - iCarsoft Multi Vehicle Scan Tool - amzn.to/44ijvbN - 722.6 Transmission Dip Stick - amzn.to/3prsx7g - Valvoline ATF Fluid - amzn.to/3NqVt7s - Shell ATF Fluid - amzn.to/42W3lnj - Trans Oil Pan Bolts -www.autohausaz.com/pn/0039900212 - Auto Trans Drain Plug - www.autohausaz.com/pn/0000000... - Auto Trans Drain Plug Seal - www.autohausaz.com/pn/1402710060 - Funnel Set - amzn.to/3JoOyur - Torx Bit Kit - amzn.to/44bt9wI - Milwaukee 3/8ths Impact - amzn.to/3qZX7FP - Milwaukee 3/8ths Ratchet - amzn.to/3pgiTob - Starter Mechanic Kit - amzn.to/46hRrHe

[@worldwidesports4k]

Hello I have a question, i changed the plate in the transmission 722.6 and I bought a icarsoft scanner and the adapter, yes it took it outa limp mode and it's changing gears smooth, but the check engine transmission code keeps coming back, what do you think??

[@Mechani_Cole]

@worldwidesports4k did you clean the connecting harness really good?

[@worldwidesports4k]

@@Mechani_Cole yes I did.

[@worldwidesports4k]

@@Mechani_Cole I started the car this morning the check engine and code went away, thanks for your help .

[@Matchme_5]

I have the iCarsoft MB 2.0 as well. Very good. It doesn’t code. But I’m going to try the Launch elite and see how it goes I swapped a 3.2 in my C240 6speed. I have some cluster issues mileage and key fob unlocking and locking I’m going see if the launch will help.

[@gangalee83]

Just finished this jump on a 2002 S430 and everything was a success. Thanks to your video I did this job like a pro. Nuff respect to ur channel 🇯🇲

[@aisatourydiallo465]

Congratulations good job, from Africa

[@limarius_prime]

Nice work man, with all the fun doing that stuff, it’s always interesting doing it 😂

[@Matchme_5]

Great find. Very clean

[@AshtonWebb-zk5rk]

your problem was most likely the speed sensor circuit on the conductor plate, that’s what mine was, and that’s the most common issue with em, it’s the floppy pice that doesn’t have plastic connecting it to the rest of the board

[@Mechani_Cole]

Right. So the whole conductor plate gets replaced. I've done about a dozen of em now

[@kuya_akie]

Honestly you'd be spending the same/more to have a shop reset the codes for you, so even using that scanner this one time already pays for itself! I've been meaning to buy one myself, but for now I'll just annoy my friends to borrow theirs lol

[@Mechani_Cole]

Agreed!

[@benjaminjackson801]

Great video thanks alot. My car goes into limp mode but restarting the car usually fixes and Im on my way.. If i do this repair, will I still need the scanner to reset?

[@benjaminjackson801]

Hello?

[@Mechani_Cole]

Yes. Will 100% need to use the scan tool and adapter no matter what

[@benjaminjackson801]

@Mechani_Cole thanks bud. I've watched all your videos on this car and has helped a bunch, including the motor mounts. One thing my car has a problem with is the instrument cluster. The needles bounce all over. Rpm and mph all flicker on and off, thus the needle bouncing. The gas needle never has a problem. Think maybe replace instrument cluster or deeper problem?

[@Mechani_Cole]

@benjaminjackson801 I would assume that's a bad cluster

[@HarrisonKey-v6v]

Will the icarsoft MB 2.0 fix the same issue? Are they easy to setup?

[@Mechani_Cole]

You have to repair your car first before using the scan tool

[@benhurd8518]

How much fluid did it actually take? I drained mine and refilled it with 1 container and it shows overfilled.

[@Mechani_Cole]

It look a little less than a full container. If yours is full at full operating temperature then you can drain some out until you reach the correct level.

[@rockyhogg9489]

Good job

[@pnx0223]

Sir I have this car and have the same issue with the tranny. Can you list the links for the car plz 🙏🏼 😭

[@Mechani_Cole]

Everything is in the description my friend

[@darrendecoto19]

I have to add the Mercedes update to my icarsoft v2 tool. There’s 5 options, what’s the difference between MB and M900?

[@Mechani_Cole]

Good question! Let me knownif you find out

[@jbncnow]

My reverse lights dont work is there a switch in here ? im stuck in low gear also the car is a 2000 with a 1999 filter and brown fluid

[@Mechani_Cole]

Check fuses or bulbs first if both aren't working. Will need to do a reset after the repair to get it out of Limp Mode

[@CorraLaine]

If I have no communication with TCM and ECM does replacing this cause the the scanner to be able to communicate again? Also, if it doesn’t, I can’t do this replacement because I’ll have to clear the codes right?

[@Mechani_Cole]

Might not be selecting the right model of using iCarsoft. It will say no communication if the wrong model is chosen

[@CorraLaine]

@@Mechani_Cole thanks for the reply. It was done at a shop so I have no clue which scanner they used. My car is stuck in limp mode after getting front cv axels repaired it was already saying no communication prior to the limp mode. It has been stuck for almost 6 months now. Should I purchase my own scanner?

[@travishardeman2224]

How do i install mercedes benz software i bought the icarsoft from the link and the 38 pin connector. It says check memory card yours said mercedes immediately

[@Matchme_5]

Did you get it to work

[@sergeantspeed5941]

I don't understand these creators who heart react a question and don't respond. Basically said "yeah i hear you" and proceeds to ignore you.

[@sergeantspeed5941]

Seems super disrespectful to heart your question without responding

[@Mechani_Cole]

I liked the question. I didn't have the same issue. Therefore didn't have feedback on it. That would be question for iCarSoft as I'm not familiar with having to install additional software.

[@griffey3]

I did the same replacement and my 2000 c280 and it’s still in limp mode. I bought a different Mercedes diagnostics reader to clear the TCM codes and it had every Mercedes listed as a car option but my 2000 C280 will that reader have the 2000 c280 as an option? I couldn’t even get to the part where I read the tcm because my car wasn’t listed please help!!!

[@Mechani_Cole]

I'd use the scanner I have linked in the video description. I still use this scanner all the time, works great for these years

[@selokodbeograda]

W211 e class gearbox in limp mode fault codes p220a p2500 p2001 what is the problem

[@Mechani_Cole]

Probably the same thing. The conductor plate is likely bad

[@TheGunsmithingMusician]

Points to fuel door... Got the chromed license plate here. XD That is def wayyyyy too much chrome lol. Vomit inducing.

[@Mechani_Cole]

Took all that hideous chrome off right away🫡

[@worldwidesports4k]

Hello i have a question, i have your exact same scanner as yourself and it wont connect to my 2000 mercedes e 320 its saying link error do you have any ideas why is that? Key on, plug in under hood. thank you.

[@Mechani_Cole]

Good question! Double check for bad fuses or loose pins. Can check the pins with a small tack or something to see if they are grabbing

[@worldwidesports4k]

@@Mechani_Cole ok. let me get back with you. man we just had a tornado in Houston texas, I don't have lights and my phone is about to die. I get back thank you dude.

[@oimissed1292]

Are you still happy with that scanner or have you moved on to something better thanks

[@Mechani_Cole]

Still happy. It's a great scanner. I have a few others, but this is my main one besides using VCDS for Audis

[@darkozmija6849]

I have P0741 code on my gearbox oil was really bad so i change it now looks better but do i need also to change this plate, because torque converter is fine gearbox is shifting smoothly no weird noise no nothing so i don't know what the issue can be

[@Mechani_Cole]

Either way, you need the proper scanner and adapter to reset the code. It won't reset on its own

[@joeinline4443]

Did you try the Icarsoft through the inside port ?

[@Mechani_Cole]

Yes. TCU can't be accessed through the OBD port inside though.

[@juanflores2449]

Would this work on a 2000 clk 320 ??

[@worldwidesports4k]

yes

[@Mechani_Cole]

Yes

[@JeremyCecil-h1w]

I have a 2005 e350 4matic ... Is it absolutely necessary to replace the conductor plate every time or can the tcm be reset without doing that just to get it out of limp mode ?? Basically I'm just asking if it can be done without having to tear it down ??

[@Mechani_Cole]

Always try a reset first, sometimes it works if you have the proper scan tool. Then if that doesn't work, more work is needed

[@JeremyCecil-h1w]

Thanks for the fast reply .. and lol I didn't realize that like twenty other people had the same question as me ... Limp home mode sucks man thanks for the input tho ...

[@Mechani_Cole]

@user-tp7ys7pp5v limp mode sucks the older you get too🥲😅 But for real, I keep a scanner in my Mercedes and Audi just in case it ever decides to go into limp mode. More often then not, you can reset the computer and get home at least

[@pierreperk7079]

My car drived but it didn't shift out of first gear.Change a conductor plate but now the car will not drive at all.Is that because it needs scan

[@Mechani_Cole]

Yes. You HAVE to reset it with a proper scanner through the box under the hood with the 38 pin connector. You can not just change the part and have it be fixed. The computer must be able to access the TCU module to send the command

[@pierreperk7079]

Thank you so much.The car still jacked up.I put it into gear, but the wheels will not spin so that is a sign.It's in limp mode

[@Mechani_Cole]

@pierreperk7079 yes. It 100% needs to be reset with a proper scanner

[@pierreperk7079]

@@Mechani_Cole thanks you so much .iam in California

[@pierreperk7079]

Sorry, have one more question.Is it possible that I could have that lever in the wrong place where it connects to the shifting rod

[@boninotate1305]

What are you saying odd2 pin connection

[@Mechani_Cole]

Under the hood there is a 38 pin connector to hook up an obd scanner to that connector. You need the adapter listed in the description

[@zemoney954]

❤

[@niles76]

"Promo SM" 🙈

[@Mechani_Cole]

"Bot Comment SM"

[@darrendecoto19]

This is the most helpful video I found on doing this. So thank you very much for putting the time in to make this process nearly dummy proof.

[@davidseo5591]

Hello Do I need to do the program after replacing the conductor plate with a new one, or do I already have the program in the new conductor plate What should I do if I have to do a program?

[@Mechani_Cole]

No programming needed as far as I know. But you do need the correct scanner to be able to access the transmission control module for the reset to get to rid of the code and get it out of limp mode.

[@alejandrorodriguez3617]

2005 Mercedes Ben e320 change the conductor plate after that didn’t want move no more or shift can can this scanner help take out limp mode the one that you post .

[@Mechani_Cole]

@alejandrorodriguez3617 yes. As long as there isnt an issue still

[@alejandrorodriguez3617]

@@Mechani_Cole I had use icarsoft cr pro or I can use any icarsoft

[@Mechani_Cole]

@alejandrorodriguez3617 has to be Mercedes-Benz compatible

[@nicodemuscooke]

Will this work on my 98 e430 turbine sensation circuit a is what the engine code came up as??

[@Mechani_Cole]

Yeah, most likely. As long as you have the correct computer to reset the codes after. A regular scanner doesn't work. On the valve body (in your transmission) you will find a plastic plate, which carries the input and output speed sensors. This plate is known to crack around the input speed sensor. Hence your problem and the lock down in second gear. The repair for this means removing the tranny fluid/oil pan/filter/valve body and lastly the electronics plate. Then replace the plate, and refit all other parts. Hope this gives you a starting point🫡

[@creationinspired200]

Where did you purchase your plastic assembly from?

[@Mechani_Cole]

Not sure what you are referring to. Everything I used should be listed on the description or the pinned comment.

[@lorenzothomas9620]

What’s the part number of that scanner

[@Mechani_Cole]

iCarsoft 38-pin connector - amzn.to/3qSG0p3​ - iCarsoft Multi Vehicle Scan Tool - amzn.to/44ijvbN​

[@lorenzothomas9620]

@@Mechani_Cole thanks

[@BrandonTurnsWrenches]

How much fluid and what’s the labor Hours for this job

[@Mechani_Cole]

Took me about 2-3 hours max, but I was taking my time and taking breaks. The fluid depends on how much comes out. But either way, have to adjust the fluid level according to the dipstick. Hard to say an exact amount on transmissions

[@BrandonTurnsWrenches]

@@Mechani_Cole how many quarts did you buy

[@Mechani_Cole]

@TheArmedMechanic just a 5qt jug. Don't even think I used it all either

[@BrandonTurnsWrenches]

@@Mechani_Cole okay thank you

[@BrandonTurnsWrenches]

@@Mechani_Cole do you remember the type of fluid

[@hoangan5262]

Great video. After replaced the transmission conductor plate, is the car needs to reset the programs?

[@Mechani_Cole]

Yes, it needs to be reset with the proper scan tool. Link in description for everything needed

[@juanflores2449]

Would this scanner work on a 2000 CLK 320 ??

[@Mechani_Cole]

@juanflores2449 yes 100%

[@juanflores2449]

@@Mechani_Cole I have got the MB v.2 and it saying it doesn’t support my system I don’t want to spend no more money on this beautiful car your a life saver if this really works i have replaced the conductor plate and not it does not drive or reverse why is that?

[@Mechani_Cole]

@juanflores2449 are you using the 38-pin connector? It won't work without that part to access the TCU. So it won't shift until it gets reset properly