Mercedes SLK & Chrysler Crossfire 🏎️ Oil Change & Oil Filter Replacement

Doing a complete Oil Change and Oil Filter change on a Chrysler Crossfire or Mercedes SLK. Please 👍👍👍 & 🔔 SUBSCRIBE & mention in the COMMENTS your thoughts. For more details, extra videos, & a COMPLETE TOOLS LIST used click SHOW MORE. 👉
Lots of tools 🛠️ are needed to do this job, but you already may have many of these. In all there all around 25 tools or supplies you need to gather. They will all be listed 📋 below by category for ease of reference:
These are the tools 🧰 you need for this job!
These are the specific tools and supplies for the Oil Filter:
🔧 Ratchet Wrench 1/2" amzn.to/2TMsQGk
🔧 1/2" Extension Set amzn.to/3UbWna6
🔧 Oil Filter Wrench amzn.to/39MrE10
🔧 Torque Wrench 1/2" amzn.to/3eiZl8P
🔧 Flat Tip Screwdriver amzn.to/3wbHuZd
🔧 Needle Nose Pliers amzn.to/3oLkQUp
🔧 Hard-pointed scratch awl amzn.to/3507OL7
⚠️ This is the part number if you decide to replace the entire oil filter cap with housing.
A1121800710 👉 amzn.to/3GednGx
Various Oil Filters to choose from:
➡️ Fram Extra Guard CH8481 amzn.to/3DO8N12
➡️ Mann-Filter HU718/5X Engine Oil Filter amzn.to/3hkXjdI
➡️ K & N Oil Filter PS-7004 amzn.to/3WFmQhW
➡️ Mobil 1 Oil Filter (M1C253) amzn.to/3WFmVSM
These are the specific tools and supplies to get to, remove, and reinstall the Oil underneath the car:
🛠️ Ratchet Wrench 3/8" amzn.to/2JiEG9d
🛠️ Socket set 3/8" short amzn.to/2THxwxi
🛠️ Breaker Bar 3/8" amzn.to/3oQGTJx
🛠️ Torque Wrench 3/8" amzn.to/3jLg4CN
Other Helpful supplies:
🛢️Penetrating oil amzn.to/325XWgJ
🛢️ Shop Towels amzn.to/3kNSKpi
🛢️ Oil drain pan amzn.to/35WWaQk
🛢️ Oil funnel amzn.to/3jPgJD9
🛢️ Recyclable container or empty jug
🛢️ Latex Gloves amzn.to/3tfAuux
Other safety related equipment:
🧤 Car Ramps amzn.to/36TofIS
🧤 Floor Jack amzn.to/3oLllO
🧤 Jack Stands amzn.to/3l1Npuk
🧤 Flashlight
🧤 Gloves amzn.to/2HWG9BJ
🧤 Googles amzn.to/34PQ84o
Actual Oil type used for this vehicle:
👉 Mobil 1 0W-40 Advanced Full Synthetic Motor Oil, 5 qt. amzn.to/3t714X1
👉 Pennzoil Ultra Platinum Full Synthetic 0W-40 Motor Oil amzn.to/3UC3bNY
HELPFUL VIDEOS TO WATCH:
👉👉👉 If your filter housing breaks when removing the oil filter, then you can fix it for free! This video shows how to do that: • Repair Broken Oil Filt...
👉👉👉 Also to see how to lift a low to the ground car with limited jack stand posts or without car ramps click here: • How To Remove Wheel 🛞 ...
👉👉👉 This quick video shows all the tools and supplies you need to gather for an oil change.
• ALL Tools Needed To Do...
👉👉👉 This video is just for fun as I show how to add a new cup holder on the Crossfire in less than 10 minutes to do it yourself:
• Chrysler Crossfire Cup...
Also, If you want you can help support this channel and get me a cup of coffee ☕ here:
➡️ www.buymeacoff...
OR
➡️ ko-fi.com/fixc...
OR
➡️ Click the SUPER THANKS button above.
THANKS AND PLEASE 👍 👍 👍 AND 🔔 #FixCarYourself

[@Yamazaki112]

I watched this one video, wrote down the instructions in technical terms and got all the materials I needed... Got the whole thing done in an hour and saved myself $200!!!!

[@FixCarYourself]

Awesome and nice 👌 job doing it yourself. Glad to hear about your quick 1 hour Experience. GO buy yourself something nice now that saved some good 💰! 🤑

[@jimhogan7252]

You should mention that most floor ramps are too high for the crossfire to get up onto, and if jacked up from the passenger side, close to 1.5 quarts of old oil will be left in the pan. After the oil change when you check dip stick levels (if you put in 8 qts like you mentioned) you have the condition of having too much oil in the engine. Jacking from the drivers side mitigates this and provides for full pan draining without overfilling.

[@FixCarYourself]

Great feedback. Nice details.

[@fredmoron2090]

Getting ready to buy a 2006 Roadster. Thanks for this video!

[@FixCarYourself]

Good choice! and enjoy!

[@darrelldvorak9633]

Great video, now I know the right torque numbers.

[@FixCarYourself]

Glad to help

[@nickmartinez10011]

I'm late to the party but Thank You for this info! 👍

[@FixCarYourself]

Any time!

[@jezzeestewart3712]

Thank you

[@FixCarYourself]

Glad it helped!

[@johnonesko1848]

How do you contact you for a question? Thanks

[@FixCarYourself]

Whats up!! U can comment here.

[@johnonesko1848]

We

[@FixCarYourself]

Whats up!! U can comment here.