Remove Conductor Plate Code P2767 Dodge Chrysler Mercedes Jeep Nag 1 722.6 Transmission

[@alexmartinez7488]

2007 Dodge Charger SRT8, just replaced this after having issues randomly getting stuck in 3rd or 4th gear then suddenly got stuck in 1st, and code ran p2767. Replaced this all by myself with the help of this video. 200 dollars maximum in parts, all off amazon, quoted 900 to fix at mechanic, just saved myself 700. Thank you man i appreciate it. 17 yrs old btw this was my first car project besides for changing oil. If i can do it, you can!

[@FixCarYourself]

Wonderful job. I'm very proud of you no matter the age for doing a project like this. You are a great example to many young people out there. You buy yourself something nice with that savings!

[@arkivezaj]

All I wanna say is that this video saved my car. 2008 grand Cherokee with nag1 trans. Transmission shop said "You have the mercedes transmission and it's shot, you need a new trans, or I can get you a rebuilt one for 3 grand NOT INSTALLED".... I ran my codes and got the trans speed input sensor code, researched Alot of videos and came across this one. I thought what the heck, it's worth a shot. Followed this video to the finest detail and got my trans working properly. Was getting stuck in 3rd gear, not going over 40 miles per hour and bucking when trying to go faster. Now it's silky smooth. This video saved me from dumping my car. I can't thank you enough. Cheers!!!!!!!

[@FixCarYourself]

So glad to hear, and that you saved all that money, and most importantly you did it yourself. 👍

[@RaekwonWebb]

This video definitely helped me tremendously I’m having trouble with getting my connector won’t tighten down advice?

[@FixCarYourself]

Glad to hear. What do you mean by connector?

[@rafiqfryddie3559]

Hi, I find this video very informative and professionally done. It is a great help and brings together a proper understanding of the error code. Proving links to purchase parts and listing which tools and other items are needed to do the repair is just a huge plus. This shows that you not only know your stuff but take pride in what you do. I have to say this and it is not a reflection on the video but in general, all the videos that I have watched many videos regarding maintenance and repairs of the Dodge Nitro and most if not all only focus on the gasoline engine types rightfully so most videos comes from the USA. Very little info is known about the diesel version, 2.8 CRD AWD the owner's handbook doesn't provide much info either. Through this video, I learned that the diesel version has the same transmission as the gasoline so that is a good spin-off. Once again thank you for a very good presentation.

[@UnionThugg]

Some key points: 1) Changing the filter and fluid will not hurt this transmission. You must use ATF+4 fluid, and do not add "friction modifiers". Use the correct dipstick, and the refill is accomplished by using the chart that shows fill level by transmission temperature. 2) The A580 requires a relearn procedure after servicing. 3) Check your shift cable(s) for excessive bushing wear. Replace as necessary.

[@FixCarYourself]

Nice tips this should help others out!

[@b-bitter91]

What u mean the a580 requires a relearn procedure?

[@crankyyankee2475]

Mercedes was not happy with a speed sensor that was easily accessible. Good video.

[@FixCarYourself]

Thanks. I'm sure they figured that out for their newer vehicles thanks to the help from the Stealerships.

[@blkferrari355]

This is the best video that I’ve seen on this topic. Thank you for putting this together along with the tools and parts lists

[@FixCarYourself]

Glad it was helpful!

[@originalmatt5813]

Finally a video that helps me with my problem!!!! My 2014 Chrysler 300 has been slipping bad. Traction control turns off and slips into neutral when coming into a full stop sometimes. Been considering taking this problem to a transmission shop but after watching this video I really hope this will fix my problem.

[@FixCarYourself]

Glad this helped. Did you fix the car yet?

[@couches]

What a great video. Fantastic imagery and camera angles, and you did an amazing job explaining. My reason for looking up this video is to replace the input speed sensor which was also described in your video. Thanks so much!

[@FixCarYourself]

Glad you enjoyed it! and that it helped. My goal was to be as detailed as possible.

[@couches]

@@FixCarYourself I had code P1705 and P0730 for my dodge challenger which is related to input speed sensor 2 overspeed and incorrect gear ratio. I've managed to follow your video all the way up to removing the valve body. I've ordered a new conductor plate and waiting for that to come in. I'm really hoping that after this repair is done, my transmission problem will go away. The input speed sensor is not necessarily the problem, but I'm just going to replace it anyway and hope that it was it. I know the mechanic would charge an arm and a leg for something like this so I'm keeping my fingers crossed. I'll let you know how it goes! I've liked and subscribed. Thanks again!

[@FixCarYourself]

Thanks, how did it go? Did you complete the job?

[@couches]

@@FixCarYourself the installation went great thanks to your video. However I got the same error code after driving it. It hasn't done it in a while though

[@dmartinez492]

Great video, this made the job simple and easy to fix thank you

[@FixCarYourself]

Glad it helped

[@nickerickwhitaker8975]

Thanks man you helped a lot. I appreciate it more than you could know, you made this job so much easier.

[@FixCarYourself]

Thanks, really glad to hear that!. The best part is you did it yourself.

[@JoseRamirez-qt1ee]

Congratulation, very professional video, very helpful for me, thank you.

[@FixCarYourself]

Glad it was helpful!

[@uneasyrider07]

thanks, very detailed information, excellent teaching and video coverage

[@FixCarYourself]

Glad you enjoyed it!

[@johndaniel238]

I loved the plastic bag idea. lol :)

[@FixCarYourself]

Thanks. It saved me from dirty hands.

[@auronx]

Thank you for your effort, it is greatly appreciated

[@FixCarYourself]

Thanks for the complement.

[@jamescrowder5776]

Thanks very informative

[@FixCarYourself]

Glad it was helpful!

[@FADI_Italy]

Great Explanation

[@FixCarYourself]

Glad it was helpful!

[@gatsewesterdijk9731]

Thanks for the info.

[@FixCarYourself]

Yep hope it helps!

[@duanebonney]

Might be good to replace the o rings and mini strainers on the solenoids too?

[@FixCarYourself]

I haven't had any problems with those. But if you know the sizes of the o-rings then please mention it in case others decide to replace those.

[@duanebonney]

Hello. Thank you for your video. My N3 sensor and rear speed sensors read a little funny on my live scanner, then fail and read 0rpm, when I hit third gear. The ABS light comes on. Is it a faulty conductor plate?

[@FixCarYourself]

Hard to tell when reading the graphs. I know one of the biggest problems is the conductor plate. However, if possible see if you have any codes 1st. That will help you narrow down your problem.

[@rufinoornelas8274]

Would it need to be programmed or as easy as just replacing a part

[@FixCarYourself]

Swap the part, but check for codes after with OBD scanner. You may have to still erase them, so its not stored in the system.

[@bnoble]

Amazing video! Do I need to reset codes before starting up?

[@FixCarYourself]

Sometimes the codes go away once you start driving a little bit but may still be stored in the vehicles OBD system's memory. But it doesn't hurt to reset.

[@UnionThugg]

You need to perform a relearn procedure, so the TCM can properly shift it.

[@james4228]

Amazing video perfectly done I been looking for a video to replace conductor plate this the best most informative great job brother, my 06 charger rt speedometer won't move at all and it stays at 0 could the speed sensor/conductor plate be at fault? I just have no codes is the problem or check engine light

[@james4228]

It drive at least 20-25 mph at most but speedometer needle won't move just the rpms thanks in advance

[@FixCarYourself]

Glad it helped

[@FixCarYourself]

It sounds like a bad wheel speed sensor. However their should be codes to confirm this. So maybe try another code reader 1st.

[@james4228]

@@FixCarYourself I replaced all the speed sensors front and back but still not working abs traction control lights are lit

[@james4228]

​@@FixCarYourself could I send you a video thru an email or something to show you how it acts? Thanks in advance

[@templar1288]

2007 Dodge Charger I have code P0501. The transmission mechanic changed the conductor plate. The car won't change gears and won't go past 25 mph. The car is still running as before the conductor plate was changed. It's saying speed sensor. Mechanic does not know where the speed sensor is located. He stated that the speed sensor is part of the conductor plate??

[@FixCarYourself]

I made a different video specifically involving this code P0501. You can watch that here: 👉👉 kzbin.info/www/bejne/gJfVfnier9GlfKcsi=yWlMZvPvreEz6Tw2

[@dajourdixon5567]

Need to do this. Do you know where I could possibly get new solenoids and is each solenoid the same

[@FixCarYourself]

Usually the solenoids aren't bad, but what most people get is a new conductor plate.

[@dajourdixon5567]

@@FixCarYourselfyeah I had ordered a 6pc solenoid set for about $90. I’ll be doing this today, wish me luck !

[@FixCarYourself]

You got this!!!

[@davewatson2018]

I'm getting p0700 on mine and I already bought a new TCM

[@FixCarYourself]

Did you ever figure out your problem with the code P0700?

[@davewatson2018]

@FixCarYourself nope still got mine and now I'm about go through the transmission smh 🤦🏼 ita been hell since I bought the car bud

[@FixCarYourself]

Just guessing but maybe you need a new or used TIPM (Totally Integrated Power Module)

[@alexmartinez7488]

Dodge Charger SRT8 196000 miles worth it or not? Throwing this code and sometimes getting stuck into 3rd or 4th geR

[@FixCarYourself]

Hard to say. When a car has that many miles on it changing out the conductor plate involves removing the transmission oil, which might do more harm to the car.

[@bikramveersingh6027]

Hi i have a 2005 Chrysler 300C and its making whining noise from transmission and shifts perfectly for some time after starting the car but after a minute or two it starts making the whining noise and slips gears and doesn’t go into gear. I am not able to figure out what’s the issue if anyone could help me with that it would be a great help

[@FixCarYourself]

Is it low on transmission oil?

[@homeroaguilar6163]

How many transmission fluid quarters you put on it?

[@FixCarYourself]

I put in the amount of quarts that came out...so I measured the old oil and put that amount back in for starters. Then later I checked and added some based off my dipstick measuring tool and by using a code reader. But many people just put back in what they removed.

[@homeroaguilar6163]

@@FixCarYourself Thank you

[@FixCarYourself]

👍

[@templar1288]

What are the symptoms of a bad condenser plate

[@FixCarYourself]

Could be hard to shift, might here some odd sounds. And you will have codes on.

[@eddy7655]

Will failure in any of the solenoids cause the car to stall and turn off at about 30 mph? I'm chasing a stalling issue. No check engine code. Smooth running motor and trans. Just a simple stall want to rule out solenoid issue.

[@FixCarYourself]

Put a code reader in to narrow down the issue, as it could be a bad wheel speed sensor as well.

[@FixCarYourself]

The code reader would indicate if the solenoid is bad or not responding.

[@davewatson2018]

Mine is stalling out and everything to sometimes it'll Rev it's self up and do all kinds of weird stuff I literally replaced everything from the throttle body to every sensor plugs coil packs the whole 9 and I'm still getting a p0700 code so imma be changing this part out last thing ik to do since it's a p0700 code it'll come and go though it finally stayed on long enough for me to catch the code

[@OscarAlvarez-zp6uo]

My friend, a question, I have a 3.7 4-speed Cherokee. The plates that appear on Amazon and Rockauto say they are for 5 speeds. Do they still work?

[@FixCarYourself]

l' m not sure. I try to get the actual part replacement. Check with the part number is possibile.

[@UnionThugg]

The Cherokee never had the 3.7 engine. The WK Grand Cherokee did, and the only transmission used in that application was the A580, which this video covers.

[@FixCarYourself]

Can you buy both parts and use the one that is identical, and just return the one you don't use.

[@HwH_DeagleDan]

When I replace the conductor plate are all tge sensors on it already? Ny code is p0717 input speed sensor for my 08 jeep commander.

[@FixCarYourself]

Yes the valve body contains all those sensors. Just make sure the sensor needs to be replaced. Sometimes it's just needs a new conductor plate.

[@HwH_DeagleDan]

@FixCarYourself yes it states input speed sensor no signal so I'm assuming that it's bad. So I figure the conductor plate has the sensors on it so I would swap that its an 08 with 167k miles

[@FixCarYourself]

That's a lot of miles some would say not to drop the trans oil. Its a tough decision.

[@santiagoparamo2571]

Is the tcm also in the conductor plate? Im getting code U0101

[@FixCarYourself]

It is not. That code could indicate a low battery voltage, or corrosion on the battery terminal leads as an example.

[@joshuajackson9116]

Hello looking for help

[@FixCarYourself]

Whats up.