Mercedes SLK32 AMG/SRT-6 Clutch Pulley Delete Install (v-tech 65MM)

Installed my clutch pulley delete form V-TECH
vtech.ge/en/products-en/18-me...
FTY he will respond fasted from face book (tell him you found this video)
/ posts
I went with a 65mm putting 16PSI
Also thank to needswing
www.needswings.com
Instagram @buffyclk500
SUBSCRIBE
/ @nd_72

[@onaning1]

Bro, I really love your channel and we are proud to be Mercedes owner. I have lots of lesson I learned from your blog. Peace brother!!!

[@Nd_72]

I am happy that people are liking my videos I will keep making more and more hoping I can make more people into Mercedes’

[@speedracerjeff]

That custom intake setup with the conical filters in the very front is awesome, love it. You should sell those!

[@Nd_72]

that set up is not perfect to sell but I am glad you like it I am happy and I can say I made it my self lol

[@waltscrossfiresrt6]

Quick question about your dowel pins install I actually install my dowel pins into the pulley first leaving enough of the pin out to install the cap and then lined up the supercharger shaft where the pins should go and installed the pulley and torqued down the bolt probably do a test drive Saturday seems pretty solid

[@Irun1320]

Hey man I have been following and subscribed to you for awhile now. I have a question. Where did you wire your boost gauge and air fuel gauge to get the reading for low voltage. I got an Srt 6.

[@musicman5299]

Do you see all that oil on your magnetic clutch? that's your culprit!!!!! That's why your SC kept engaging and disengaging! its pretty much slipping! I am glad i found your video on how to pull the clutch and entire assembly off without damaging it! I am going to clean it up and see!

[@consciousgrind7699]

Nice info and tutorial. I installed this with a tune and this car is a beast now 💪. My front seal went out as well and about to install it tomorrow. Is that seal a pretty straight forward install.to.do. Any tips?? Thanks for the vid

[@Nd_72]

Yes very easy to do But mine was leaking a little after so I up graded the seal to Jon Bond Performance. And love it

[@smm7540]

Cocker spaniels crack me up.

[@waltscrossfiresrt6]

I am still working on getting my fixed pulley tuned one tune VTech sent was killing power to my rcm and fuel pump figure that out a new pump and rcm later I came to the conclusion after 5 revisions my 550cc injectors isn't enough for a 181/63 nih manifold setup 630s on the way

[@Nd_72]

Nice

[@raynellmoore68w]

What’s a better setup 181/63 or 178/70? I want to do a build to get the max power

[@johnnynunez4799]

Hey Adam, Quick question: How is the 65mm clutch delete pulley working for you? Any damages to your engine? Is this car driven daily or is it a track car? I have a C32 with all the mods you have except I still have original SC pulley. I went with needs wings 178 crank but thinking of the the stack set up if the 178 and 65 but not sure if clutch delete is a good idea

[@Nd_72]

still daily the car and race it a lot no engine problems my set up is the 178 and the 65 and the car pulley and still a great daily

[@stevegivelas9769]

What was the weight difference ?

[@OHydroTsunamiO]

You need esp off, preferably dyno mode on, to make full power bro. You just need thick tires, or drag radials are the best

[@awztattoos1472]

Dude what? Dyno mode? My sl55 has dyno mode? O.o

[@OHydroTsunamiO]

@@awztattoos1472 oh yes. Esp only turns off traction control, not stability, so you turn on dyno mode and you will have full power no interruptions

[@michaelcooper2762]

I noticed you still have those $300 bucket seats, how have they held up? I'm interested in getting the same set myself

[@Nd_72]

ummmm just ok not a big fan

[@carolinasrt4163]

Have you noticed any bucking or like the cars still in boost when you let off the gas I have a srt6 an was thinking about a clutchless pully but was told it would buck an almost be like you was on the gas when slowing down cause it was in boost

[@Nd_72]

No are other people

[@carolinasrt4163]

@@Nd_72 none that I know personally just something I heard my buddy has one with fbo an smaller clutched pulley he was told the clutchless pulley would cause that but your videos seem to show otherwise just trying to figure out what’s best thanks for the informative videos on this pretty unknown platform

[@lashawnbenning8113]

Did you figure out if the bucking was true for the SRT-6 I have a 2005 that came with the erocharged ECU and 65mm tune and I'm thinking of going clutch less and switching over to V-tech tune

[@MrMachacker]

What app are you using for on board monitoring dude?

[@Nd_72]

Dash command

[@user-gq4lp2sm7r]

hey buddy, I have a 2002 e320 and I want to know if I can put a c32 supercharger in my e320 since I think the have the same m112 engine? if not do you know any turbos that would fit?

[@Nd_72]

Blood motor sports can do a turbo

[@Frankie_Freedom]

Okay...weird. I followed your instructions and ordered the pulley from VTech and have messed up my order twice now.. once by sending me a tuning cable and now, sending me a fixed pulley that requires the drum to stay on...also without the pins... Did I miss something? Their response each way takes a few days

[@Nd_72]

I would say hit him up

[@Lotusespritdriver]

Do you still have the magnet drum? Are the two friction discs still intact? How much would you want for it, if so?

[@Nd_72]

I have it But using it for a random project

[@Lotusespritdriver]

@@Nd_72 I take it thats a "no sale" ?

[@masa5784]

What is that belt type never seen it for sale anywhere. Looking for stronger like kevlar etc..

[@Nd_72]

Rob from needswings got it for me. He is a great guy tell him you saw my video

[@waltscrossfiresrt6]

What brand puller did you use because I got one from harbor freight and I'm having no luck whatsoever I've been two days trying to get this hub off I'm about to if something up any advice

[@Nd_72]

It was from Amazon and are you using heat

[@waltscrossfiresrt6]

@@Nd_72 I went to Lowe's and got the map gas and but never got the pop I heated and turned my puller until it got hard heated and turned about 20mins it was off I was shock how easy it was I was waiting on a pop but never got one thanks but 181/63 on the way

[@waltscrossfiresrt6]

@@Nd_72 also the harbor freight puller will wrk just got to trim one of the edges on the arm down

[@Jakenurmi]

Hey i have c32 amg and im watching for smaller pulley for supercharger, what diameter the stock is? I can buy it!

[@Nd_72]

I think stock is 74 and yes I have a stock one for sale and a 65mm one for sale

[@verin7construcciones358]

Hi friend. I have a SLK32 amg. I'm looking for the pulley with the belt and the intake

[@verin7construcciones358]

@verin7construcciones

[@verin7construcciones358]

@fabiodanielamg

[@auto3garage522]

Will it be worth it put this supercharger on my 01 e320

[@Nd_72]

Could be

[@hrachtorosyan9852]

don't mess with it only amg engines are forged normal ones will go wrong they cant resist and supercharger labor all that you might as well sell the e320 put bit more money on other old powerful benz

[@Nd_72]

@@hrachtorosyan9852 fyi the m112 can hold well over 125 more hp. I made lots of videos with my slk320 that I drive around with 125 shot and it still is going strong. Look up my slk videos it is cool and fun

[@stevegivelas9769]

Where you getting other gasket from ?

[@Nd_72]

J b performance

[@stevegivelas9769]

@@Nd_72 I guess you didn’t weigh the difference between magnet clutch pulley vs just clutchless pulley

[@jasse5602]

what is the difference on a clutch delete pulley and fixed pulley?

[@Nd_72]

Lighter Power right away And no more blown out bearing

[@jasse5602]

@@Nd_72 okay which one do you suggest on a daily

[@Nd_72]

@@jasse5602 fixed

[@Frankie_Freedom]

If you're doing a fixed pulley make sure you have upgraded, cooling pump. As running a fixed pulley runs hotter than a clutch pulley

[@oceanmoist8553]

is the pulley aluminum or steel?

[@Nd_72]

Aluminum

[@rickmarczak1157]

I have a c32 thinking of running meth any thoughts?

[@kevinmarcus465]

I use it for a turbo car no intercooler...the meth is the intercooler works great

[@dahouligan1148]

WHERE DO I GET THE DRIVE BELT

[@donf4869]

Needswings, pretty sure it’s the heavy option

[@Lotusespritdriver]

Anyone who has done this delete, I am in need of the drum/magnet, undamaged. Please PM.

[@soufyboufy6030]

can i use this pulley on a crossfire srt 6?

[@Nd_72]

yes

[@NETW0RKERR0R404]

Hey I would like to buy the pully if you still have it.

[@Nd_72]

The stock one and 65 is sold sorry

[@Jvera95]

The guy Euro charged said that engine makes more power with a bigger crank pulley, injectors and meth. This is interesting though👍🏼

[@Nd_72]

Ooo I will be adding more boost and injectors soon

[@waltscrossfiresrt6]

Yes a crank pulley will make more than a supercharger pulley but when you stack pulleys and add nitrous it's wicked

[@Nd_72]

@@waltscrossfiresrt6 lol I will say the m112 loves nitrous

[@BYG0]

Can I put that supercharger on my 2001 SLK320?

[@Nd_72]

Sure with some mods

[@BYG0]

@@Nd_72 what all would i have to do?

[@Nd_72]

@@BYG0 will have to look into it Give me sometime maybe I will but one on my death kart

[@SergioMartinez-pu4nr]

No video on how to remove the belt... That all I came here for and figured you'd show it.

[@kevinmarcus465]

What software is that on the phone?

[@Nd_72]

DashCommand

[@kevinmarcus465]

@@Nd_72 wonder if it will work for my 04 r230

[@thenanook]

loos like you are from orlando area... i got sl55 and i need some help pm me if you have some time

[@smm7540]

Lol

[@Nd_72]

Hit me up on Instagram. @buffyclk500

[@axelromerodiaz6018]

Do you still have that 65mm pulley? I'll buy it. Let me know.

[@Nd_72]

No sorry

[@axelromerodiaz6018]

@@Nd_72 I need your expertise here. For some weird reason, my supercharger stopped working. I started troubleshooting the issue as follows. 1. The pump is working perfect 2. Pump fuse is fine 3. AIT sensor is brand new (just installed last week) 4. The spacing between the clutch and the pulley is fine. My last guess is checking if there's power in the harness connecing to the clutch. Any help!!!

[@Nd_72]

Do you have any codes @@axelromerodiaz6018

[@user-kw6yk8tl4y]

如何購買這件東西

[@Nd_72]

hit up V_tech and tell him nd_72 sent you

[@diannahoffman5919]

How much ? My b.f. has a 02 C32 ... Ill take it with or without rebuilt. Let me know.. Thnx..

[@Nd_72]

are you trying to buy my slk32 or my clk55