How difficult to reprogram the injector using this Solus Ultra Snap on abs do you recommend it for other to purchase and use ?
@AlphaCodecouk2 жыл бұрын
Hi The Solus is Expensive so you need to weigh up wethwr it us a good investment but yes it is the tool for the job
@adrianioan82652 жыл бұрын
Hi mate i put new engine on my sprinter om646 but the injector is different is delphi on new engine from c class 170 bhp mine was 105 bhp bosch injectors what you think works ?
@skyheatingair3 жыл бұрын
Would you make more videos for sprinter 2015 2500 such fuel filter , Diesel Emissions Fluid Injection Nozzle , or whatever you working on , THANK YOU Great job.
@AlphaCodecouk3 жыл бұрын
Hi Yes I can I will post a full service video if you are interested let me know. Thank you for your feed back
@jamdown1ify Жыл бұрын
Hi great vid, can i use a cheap diagnostic machine to code injectors. Thanks
@AlphaCodecouk Жыл бұрын
Hi Yes as long as it has the programming ability
@NikaTaliashvili2 жыл бұрын
Is it necessary to reprogram the injectors if I only changed the washer and the nozzle of the injector? And also I'm interested if that can cause the the engine to shake excessively?
@AlphaCodecouk2 жыл бұрын
Hi Nika It is not necessary to reprograme if you are just reconditioning the injector. As for the shaking it could be a number of things at fault so hard to say but yes if your injectors are faulty then that is a good place to start from. I hope this helps
@frasse4504 жыл бұрын
if you change the engine but use the same injector do you need to code in them again?
@AlphaCodecouk4 жыл бұрын
No as the coding is in the ECU.
@Hi.Al.3 жыл бұрын
Just reset quantity adjustments
@austinroberts93273 ай бұрын
Hi can you help me please I've put a second hand engine in my 15 dci 2010 but with my snap on solus ultra I can get to the injecter codes all it's letting me do is check the injecters ar working now one of the people that I've had out to it say I need a Nissan merchant to reprogram Al is this true please please help me has iam well out of money or would you say scrap it cut my losses and get something else iam at the end of my tether with my 2010 Nissan quashqai please try help me the cac ant worth wot is stand me at now but I like it thanks Austin ps please let me know thanks
@tomaszkotwica3435 жыл бұрын
Does the "Solus Ultra" support the 2.1L OM651 US Sprinter as well?
@AlphaCodecouk5 жыл бұрын
HI Yes Snap on is International and I have found that they support all the vehicles I have worked with. Best thing is to find a dealer near you and ask for a demo. God Bless
@officixlbiggi60574 жыл бұрын
I have the same model but i can’t find the engine option, currently running on 15.4?
@AlphaCodecouk4 жыл бұрын
Hi There can you elaborate please
@officixlbiggi60574 жыл бұрын
AlphaCode.co.uk If i connect to a VW polo it wont find the engine option on the machine for injectors or coding.
@AlphaCodecouk4 жыл бұрын
@@officixlbiggi6057 Hi I know sometimes its a pain to find but if you scroll through it should be there What machine are you using?
@sergensahin26705 жыл бұрын
Is it necessary to recode after changing the injector, also, does it cause any effect on engine ?
@AlphaCodecouk5 жыл бұрын
Hi Yes It is necessary as the ecu will use this data as injection timing. When you replace the injectors the van will start but performance will not be there until you program them in. God Bless
@aamir39264 жыл бұрын
@@AlphaCodecouk I've just replaced my injectors but the van goes in lim mode and sometimes it comes out of lim mode for 10 minutes do you think it's to do with the programming issue?
@AlphaCodecouk4 жыл бұрын
@@aamir3926 After changing the injectors you. Will need to program them into the ECU. Please see my video on this. Did you buy new injectors?
@aamir39264 жыл бұрын
@@AlphaCodecouk The injectors were removed of a Mercedes sprinter we were breaking.
@AlphaCodecouk4 жыл бұрын
@@aamir3926 They too could be faulty? What year is the sprinter you are breaking?
@Michael-tg5uf4 жыл бұрын
what happens if you fit a second-hand injector ..................ps great video
@AlphaCodecouk4 жыл бұрын
Hi Micheal Sorry for the delay in replying If you fit a second hand injector than the install process is the same.
@AlphaCodecouk4 жыл бұрын
You follow the same procedure. Each injector has an individual No and thats how the ECU knows which one to fire. God Bless
@alojai57654 жыл бұрын
The dash
@stevesmith63114 жыл бұрын
I had to turn this video off because that music was driving me mad, WHY would you have anything like that playing, we are not here to listen to music.
@AlphaCodecouk4 жыл бұрын
Hi Steve Sorry you did not approve of my taste in music. You could turn the volume down after all I made this video just to show how I removed the injectors and reprogrammed the new ones in. I hope it helped you in some way at least. God Bless