Merrick Motorsports Headlight Intake Rings - Install and First Impressions

[@higg13001]

Picked up a pair of these about a month ago, (after removing the pass side 'cap'.) Very good product. Really like the red ones, but since my HC is red, wanted to have a different color. (Too much of a good thing/color.) Got a set of yellow, to give the look of turn signals. Very happy with the outcome. Installation is a breeze, btw.

[@WorkPlayDrive]

Yellow is a great choice contrast for the red 👍 how do the new powder coated ones look?

[@higg13001]

@@WorkPlayDrive They look great. The yellow (a great shade btw) really complements the red. Plus, installation was a snap. They clean up real easy too. Probably due to the powder coating.

[@jcmfwb]

I know this is an older video but I was looking to add these in Brembo Red plus the screens to my '18 R/T Scatpack 392 Shaker. Looks good. Thanks!

[@mattyritt]

Ordered mine on oct 2nd. They came in the mail on the 13th. They look really awesome! I was surprised at how quick I received them. I got mine in the kandy devils red. It’s a pretty good match to the red r/t badge on my scat pack. Another awesome mod courtesy of work play drive! 👍👍👍

[@WorkPlayDrive]

Agreed, love seeing my Merrick Rings :)

[@kevindegarmo5893]

Your videos never disappoint. Thanks for helping my decide to place my order. I'll have the very first set of TorRed rings!

[@WorkPlayDrive]

Thank you. You won’t be disappointed 💪

[@ishanti6920]

Looks like a must have for the new redeyes but I'm on the fence about how they look overall.

[@WorkPlayDrive]

How the Redeye's look or the rings ;)

[@ishanti6920]

Work Play Drive Haha, both actually. Not a fan of the nostril hood.

[@WorkPlayDrive]

I know, I'm trying to look past it, but I can't get over the hood ;(

[@RTLife]

If I had a challenger this would have to be installed. Makes the front look slick - nice install video man.

[@RTLife]

also congrats on hitting 8k buddy

[@WorkPlayDrive]

Oh nice 👍

[@WorkPlayDrive]

Thanks brother 🦒

[@ShootingSportz]

Do you worry about water getting into the engine by when it rains?

[@WorkPlayDrive]

Water gets under the hood from the hood edges by design, this is a big hole and I want to minimize the water and dust so I have less cleaning to do. I addressed this last week by installing a tube that collects the water and lets it drip out the maintenance pan while routing air into the engine bay. I'll have a video on this next week.

[@ShootingSportz]

Thanks! I can already seeing your channel grow! Great content!

[@jetsixsix]

I drive through some pretty heavy rains on a rural Florida highway, I don't have any issues with water coming in the openings and causing any problems. I did close up the passenger side, but that was due to bugs and dirt griming up that side of the engine bay a bit too much. I have the Hellcat intake box+tube, and I kept a close eye on it after first putting it in. The amount of water I was seeing in there after heavy rains + 65 MPH was actually pretty minimal. I'm going on 2.5 years with that set up, 100 miles a day, 5 days a week, not a single problem.

[@GunnyOne]

Can someone please tell me the Name of the Song in the beginning and background? Its awesome but Shazam can't find the Song😭

[@matthiasmordhorst556]

Same here!

[@lunacypress]

Darude - Sandstorm

[@DanSmith-ux7ni]

Got a set, very excellent product! Perfect fit and it looks great

[@Eric-uq1wn]

How did you change the color of the Shaker grill? It looks amazing!!!

[@WorkPlayDrive]

Thank you. I removed the grill and sent it out for painting.

[@darkside7802]

I ordered these a week ago and was emailed a tracking number and the tracking number doesn’t lead anywhere. I’m not sure if Merrick sent out the rings or how long it takes. Kinda worried.

[@WorkPlayDrive]

Have you tried emailing them? Merrick Motorsports was always good with communication, check in with them.

[@deanconcannon5824]

My only concern is water getting in there would it cause any damage over time they look awesome

[@WorkPlayDrive]

Thank you. I daily the car so I'm driving in the rain a lot. For the driver side I have the intake tube setup and it's been open for 2 years without issue. The passenger side when open it just gave me more cleaning during my weekly engine bay wipe down so I put a tube to route the water down and out the maintenance pan. kzbin.info/www/bejne/qpymd2SFo6ZpnNU

[@deanconcannon5824]

@@WorkPlayDrive thanks man appreciate it

[@yohannycalderon1596]

That looks very cool, I ordered mine today and the discount code works, thanks :)

[@WorkPlayDrive]

It’s definitely an awesome product 🤟

[@latinoab1]

Picked up a set in red love them they are made really well 💪🏻

[@nchargeny]

i ordered these after seeing your videos. I have a 2019 SP WB. My inlet plastic dust cover is not held by 3 clips It had 2 screws on each side of the covers that are a pain in the ass to get off. Wonder why Dodge felt the need to change how to secure these covers

[@WorkPlayDrive]

The newer challengers with the kit inlet tubes have the covers in the back and yes they are a pain to get off of you don’t know the screw is there.

[@TheRandolph95]

Pete hom i have a WB too, do we have to take it out?

[@nchargeny]

@@TheRandolph95 actually no you don't need to remove caps. You can put the inlets through the front of the headlight

[@moparmike914]

I've had these in for a while. Great product and look great

[@WorkPlayDrive]

Awesome :)

[@drivendaily6361]

Will these fit even if I don’t take the cap out? Love the look, but don’t need the function year round.

[@WorkPlayDrive]

The Merrick Rings will not fit if the caps are installed. The Scalia Motorsports version will fit with the cap in or out due to the way they mount. I've been testing these for a few months and like them as well. In fact he's currently using my photo with the orange rings as the product image bit.ly/SMDiablo

[@drivendaily6361]

@@WorkPlayDrive Thanks! I've got a merrick pair that look amazing! I'm afraid of water getting to my filter. I've got the headlight mod that channels air to the CAI

[@Sneakerhead_1992]

I have a 2016 R/T. But fixing to install a hellcat ram air intake thru the headlight. Will these be effected by the intake tube in any way?

[@WorkPlayDrive]

Nope the hellcat intake tube slides over the back of the headlight housing, far away from the rings.

[@InnoV8Official]

That's literally my next mod! I was hoping I'd win some in the contest. They look so good!!

[@WorkPlayDrive]

Bro.... totally worth it!

[@elminho_9422]

Where did you get your front grill scatpack badge?

[@WorkPlayDrive]

It’s a slightly modified charger badge. I have all the Details in this video kzbin.info/www/bejne/qWfGpIJ-bbJobs0

[@ryann7754]

For a 2016 dodge challenger srt headlight, can i remove the light to put on the merrick rings?

[@WorkPlayDrive]

No need to remove the light just pop the cap and slide in the ring.

[@moparjack3442]

And I just went out and tried again and yea the Scatpack wide body’s inlet piece don’t come out, the little piece you have to grab and pinch together to where you’ll be able to look straight through in through your engine from the front of your car

[@toddasbury7706]

How are yours black behind when looking through? Does the cap go back on?

[@v8driver332]

One side goes into the air filter but the other side goes into the open engine compartment where all the water and dirt can get in... ??

[@RohanSingh-d7d]

Will it work with 2023 challenger sxt

[@yamahasnowmoblielove]

Thanks for the discount order a set for my new to me 2015 scatpack, love the channel.

[@WorkPlayDrive]

Awesome, and hey my 2015 purchase in 2015 is still new to me ;) congrats and I hope you love it like I do years later.

[@timothygray6031]

Very cool looks awesome are you going to do a review later to see how they hold up to the elements great fit vid keep em coming WPD👍

[@WorkPlayDrive]

I usually include product updates in my videos, but it's going to be a while because these things look made to last

[@moparjack3442]

I’m not too sure if the inlets on mine come out I’ve tried to remove them before but I think it’s different on the 2019 Scatpack wide body

[@WorkPlayDrive]

The 2019 scat should not have covers it comes with the kit inlet tubes.

[@TheRandolph95]

So we don’t have to take anything out?

[@trevorb3521]

have you noticed more bugs in your engine bay / intake box now...without the screens?

[@WorkPlayDrive]

Since installing the hellcat intake almost 3 years ago I have never had bugs or an debris in the air box. The screens are more for looks in my opinion.

[@trevorb3521]

I have the hellcat intake as well and have noticed a reduction of bugs...wasp, bees, dragonflies, crickets, etc...i ran the intake for a couple weeks before i received my screens...it was a mess in there. Thats why im a little apprehensive about getting these. wonder if the screens would fit on the inside; closest to engine bay or if they would stick out to much...

[@lifeandThings]

Do you have a link to the scatpack badge on your grill?

[@WorkPlayDrive]

I have a video On this, check it out before buying it requires some modifications. Badge link is in description kzbin.info/www/bejne/qWfGpIJ-bbJobs0

[@lifeandThings]

@@WorkPlayDrive Thanks man! I appreciate all the videos and feedback. I think I am (slowly) following in your footsteps. Haha. .....🏎 P.s. If it helps anyone I I did got to the link(s) provided and BJ's is out of business & Steve White has a new link here: www.stevewhiteparts.com/oem-parts/mopar-scat-pack-nameplate-68420596ab+

[@granitecat7077]

@Work play drive would I be okay running these without the aftermarket intake? Just using them with a stock intake.

[@WorkPlayDrive]

You can run them with the stock intake no problem. Just pop out the blinker center caps and slide them in.

[@MeanBee392]

I love the way they look and the are a great way to add a nice touch of color! I was going to get some but I had a change of plans and got something else that won’t allow me to use the rings.

[@WorkPlayDrive]

Yep Jose told me what you did 🤫

[@BLACKHEAT1028]

They look real good. I have the DIPS in mine which I painted to match the stripe. Wish they were anodized Sweet video

[@WorkPlayDrive]

Thank you!

[@TheJJCRUE]

I think this look is awesome, I am going to order for my GT! Just wondering what you think about the intake headlight grills and/or caps, without adding something here there is just another opening for water, etc. to go inside..... I do not see any pics on Merrick's web page with the gill or cap WITH the colored intake rings. It seems to me it would limit how much color can be seen..... your thoughts? JJCrue

[@Chris00088]

Have you noticed anything getting in under the hood since there’s a hole there now?

[@WorkPlayDrive]

Yes a little spray on the back of the washer fluid reservoir and the inside fender. I have a fix for that though. Check out this video. kzbin.info/www/bejne/onLceIxsntt2Z6s 10 minutes and 58 seconds in is a cool option to seal off the back to prevent the spray

[@michaelhetcherjr8520]

Another great video! Where did you get the orange vents for your shaker?

[@WorkPlayDrive]

Thank you! The vents came with my Cervinis Shaker Kit. I sent them over to RR Metal Works to have them painted with my hood pros.

[@michaelhetcherjr8520]

Work Play Drive Thanks for the information

[@j.1684]

Nice and thorough video

[@FullToretto]

Any concerns with rain getting in the passenger side and on the ABS system?

[@WorkPlayDrive]

No, but I am concerned with the extra dirt and dust, that I'll need to clean out daily for shows ;( , I'm picking up a piece that should allow the air through but direct the water and debris down and out the maintenance pan. If it works out I'll put up a video.

[@FullToretto]

Work Play Drive Is this a custom piece you're building, or is it something you just bought and it bolts on?

[@WorkPlayDrive]

I’m hoping an off the shelf piece will do it. I’ll put up a video on it once I figure it out.

[@TheMopar_Lathe_Man]

Any worries about someone being able to just pop them out and walk off with them when the car is unattended?

[@moparchallenger749]

I was thinking the same thing but it would have to be another Mopar owner to even know they were there

[@WorkPlayDrive]

Not in the areas I park my car and they are attached quite well. I would say it is possible but again I saw there were set screw holes in them so maybe you can lock them in place with those?

[@venom392uned]

Just grabbed a set in pitch black, well worth the $$

[@WorkPlayDrive]

Yes sir 👍

[@sandman25901]

Can you do this on a 23 sxt or?

[@bonokomblue]

What happens if it rains? Won't it suck water into the motor?

[@WorkPlayDrive]

On the driver's side I have the intake tube, water hits the curve and drops out the bottom of the airbox while the air blows by. I dealt with the passenger side in another video with a Spectre intake tube. kzbin.info/www/bejne/qpymd2SFo6ZpnNU

[@Swerve2410]

Hey why did you have to take the headlamps out?

[@WorkPlayDrive]

Nope not at all, the only thing I needed to remove was that top cover over the headlights so I can reach in and pop the center cap.

[@toddasbury7706]

I just installed these on my 18 RT. Do I need to put something behind them to seal the holes?

[@WorkPlayDrive]

Nope, you can leave it as is. Or... on the driver side you can run the air into your air box with the hellcat airbox kzbin.info/www/bejne/pqLMgoFjetmoq80

[@hmackprotection1]

Nice!! Ordering a set of Red ones later today

[@darkside7802]

Would it fit a 2021 SXT?

[@WorkPlayDrive]

Yes 👍

[@gerardocarrillo2548]

Does the washing process change?

[@WorkPlayDrive]

Washing the car?

[@gerardocarrillo2548]

@@WorkPlayDrive yes and when it rains would I have to close the hole again so water can’t get to the filter?

[@WorkPlayDrive]

Nope the hellcat is designed like that from the factory. The water spray is dealt with in the air intake tube.

[@MNsaint]

Can you tell us just how difficult it is to take these out? You mentioned the directions say to take them out for car washes, etc. so I was just curious how easy or hard it is to take 'em out. Thanks!

[@WorkPlayDrive]

It requires a decent amount of pull to get them out, they won’t rattle or fall out.

[@MNsaint]

Can you just pull them out from the outside of the car or do you need to push them out at the same time from inside the engine bay area? Thanks, by the way, for the quick reply! Love your content!

[@WorkPlayDrive]

Thank you. You can pull them out from the front.

[@MNsaint]

Perfect - I just ordered a pair. Thanks!

[@WorkPlayDrive]

What color did you go with?

[@chriswyatt6813]

Do these work for the standard RT's?

[@WorkPlayDrive]

Yes all 2015 and up models

[@Fade2BlackSS]

Looks good man. I just purchased a pair last week. I'm a little worried about water getting in the engine bay through the passenger side. I have the AFe CAI with the headlight tube so I'm no worried about the driver side. I know you did a video creating a tube for the passenger side, but did you have any issues with rain or water before that?

[@WorkPlayDrive]

I wouldn't worry about the spray, water gets under the hood from many other areas, for me it's just to cut down on cleaning for when I show the engine bay. My only concern is if your driving in the winter with constant salt spray entering your engine bay. I would assume that would speed up corrosion as it does everywhere else.

[@Fade2BlackSS]

@@WorkPlayDrive I see. Thanks for the quick response. My car is a daily as well so winter is one thing I'm constantly worried about. Luckily, spring finally seems to be showing itself around here so I won't have to worry about it for some months. I'll have to think of something until then. I considered the tube like your video but I couldn't figure out where the water was being routed to.

[@WorkPlayDrive]

The water just hits the sealed ABS unit, the washer fluid and the fender without the Spectre tube. with it just gathers in the tube and drips out the hole in the maintenance pan. You can also pull the parts and put the caps back in for the winter months.

[@shawnsms29]

Very nice! Who would not like this......

[@WorkPlayDrive]

Thank you!

[@conceptautosolutions6584]

Subtle, beautiful and aggressive! Nicely done! 💪🏻🙌🏻🤙🏻

[@WorkPlayDrive]

Thank you 🙏

[@charlestillman2823]

Good afternoon I have the 2023 Dodge Challenger RT shakedown edition are used the same damn tube that fits on the air breather on the driver side and I use the same concept as damn tube on the passenger side. Just turned it in Word.

[@HamptonWoodruff]

so what if it rains ? will it damage anything

[@brazyhemi8501]

If you install these can you still see ur orange halo lights??!!

[@WorkPlayDrive]

Yep they don’t block anything

[@brazyhemi8501]

Work Play Drive thanks!! ❤️👌🏻🔥

[@scott50262]

Will.these restrict the airflow Into the airbox for.the hellcat

[@WorkPlayDrive]

That air box is capable of providing a lot more air that the intake needs. So I can say not it's not starving the intake, but in the ratio of air pulled from the lower airbox and the headlight (aka colder air) with the ring installed you are lowering the amount of air pulled from the headlight.

[@717kitty6]

If this compatible with the hellcat intake?

[@WorkPlayDrive]

Yes, it works with the Hellcat intake.

[@dokiboki9432]

Does anyone know where to buy an oem headlight cap?

[@WorkPlayDrive]

Sorry man I have not been able to find the part number. Try calling Steve White Parts or East Coast Moparts they should be able to help you find the Part if it's sold on it's own.

[@mdecker0420]

I like them buddy!! They look great! Quick side question, have you had any clutch issues since the clutch delay valve delete? Specifically throw out bearing noise? Been about a thousand miles since mine getting a bit of noise when she's good and warm foot of the clutch in neutral.. don't think it's related just looking for your thoughts?

[@WorkPlayDrive]

Thank you, sorry I did not do the CDV delete on my car.

[@mdecker0420]

Work Play Drive oh shoot, ur right! Sorry bout that buddy, I was thinking of your skip shift eliminator vid...

[@WorkPlayDrive]

no worries ;) If I knew I'd share tho, everyone I know keeps pushing me to do it and saying they have had NO ISSUES, so I haven't heard anything so far.

[@mdecker0420]

Work Play Drive thanks again buddy, keep on keeping on! The scatty looks sick and I can't wait to see what's up next!!

[@LaMuerteLeather]

love the look! where did you get that nice scat pack badge?

[@WorkPlayDrive]

It’s the charger OEM badge I have a video on the swap kzbin.info/www/bejne/qWfGpIJ-bbJobs0

[@TA_Plus_Hemi]

After watching your video I went out to take the rear cap off my right air Inlet. Apparently the holes for the set screws on those are for the 2017 Challengers because my rear caps would not pop off like yours there a couple of Torx head screws holding them in place which you can actually see them when you look through the hailo from the front of the car

[@WorkPlayDrive]

Thanks for the info is that because you have the lit tube inserts?

[@TA_Plus_Hemi]

Work Play Drive I'm assuming I knew what you meant buy lit tube inserts but you know what they say about people who assume so if you would take just a secondkzbin.info/www/bejne/kJnaep6Zfc2rfKM

[@TA_Plus_Hemi]

By the way sorry to take so long to mention it they do look really good with the grill on your shaker and when you're at a car show with the hood up I think everybody is going to be just drooling enough that they're not going to care that the inlet Rings don't quite match the under hood Orange. Even with you pointing it out I didn't care it looked good

[@WorkPlayDrive]

Same here I love the look not noticeable enough to be a big deal and with the hood closed it’s a good match to the grills

[@WorkPlayDrive]

Yup that’s what I meant. I need a set of those for my lights

[@392dan4]

Looks awesome man 👍👍

[@WorkPlayDrive]

Thank you

[@olds98123]

Just got a set in blue , your discount worked ! Next issue I have is a stock air intake can you help ? 2016 scat pack , don’t know what direction to go in ! 🤔

[@WorkPlayDrive]

Before I got the Cervinis shaker, I just went with the factory hellcat bottom airbox and the inlet tube. kzbin.info/www/bejne/pqLMgoFjetmoq80

[@olds98123]

Work Play Drive is it worth getting the AFe Gt air box or just go with the hellcat air box , don’t really race my ride ! Great videos as usual . Thank you

[@WorkPlayDrive]

Intakes are up to what you want to see under the hood. The AFI adds sine looks and apparently more HP. You won’t really feel it though. AFE is $$$ what does your wallet say 😂😂

[@olds98123]

Work Play Drive Hey , I went with the hellcat intake and works great 👍 I feel the power upgrade. Keeping a eye out for your new ride !

[@MohOGK]

I'm about to order billet aluminum

[@jeffsmystic]

Bought a set. Love the look and channel👍

[@WorkPlayDrive]

Thank you!

[@driv3n758]

I'll buy a set once you have a coupon code available. This will fit the hellcat too, correct?

[@tundrahog]

Reduced diameter...reduce CFM intake? Install CAI to increase intake then restrict the intake port.?. Just asking....

[@WorkPlayDrive]

I guess you are reducing the headlight inlet in some small way, but the car is providing more air via all it's channels than the engine can consume so it's not really an issue.

[@tundrahog]

Not a small way....you can see it....Smaller diameter....Stock airbox will have issues. After market CAI will also have issues. Smaller intake(tube) will cause an issue period....most CAI requires tube removal. I get it, it looks cool, but performance will be an issue...

[@SquareLimit]

tundrahog what issues? The air box is usually sealed with no air tube.. now it has a additional opening plus tube and simply gets fresh air pulled into the box from outside the engine bay.. the engine literally runs a little cooler.. and breathes better.. that’s bad for the car?? You telling me ram air restricts a engine?

[@WorkPlayDrive]

Also speaking towards what SquareLimit said, on the Scat this hole is sealed, I cut my arobox and sealed a tube to it directing the airflow to my filter. So now I have even more airflow than before only my more airflow is slightly less because of the ring ;)

[@gymratt42]

tundrahog at best you are lucky to drop a tenth at the track with any CAI or HC intake on a 392 Challenger, so the performance or hp increase is pretty minimal. Reducing the interior diameter of the air inlet will have zero impact on such a minimal modification as a CAI on a 6.4. There will be NO issues with this or the DIPS tubes. I’ve had countless intakes and ram air type setups on multiple vettes, LS1 fbody, multiple SRT vehicles the past 22 yrs. Dodge vehicles don’t pick up hp like GM and ford do when it comes to a CAI. I have had no issues with DIPS screened tubes(which reduce tube diameter like those in the video) on my 16 scat pack the past 2 1/2 yrs.

[@jaredsyx3813]

Love the look of the product and was just about to place order, BUT not after I see that the aftermarket open filter (ie no air box) would be exposed to moisture. Certainly not anything that this product is doing wrong, but just anyone who has a similar setup better think this through. Again, great looking product for all others.

[@WorkPlayDrive]

Sorry not sure what you mean by aftermarket open filter, would you mind explaining a little beeter? Nothing is exposed regarding the intake, my setup is similar to the shaker intake with the headlight inlet.

[@jaredsyx3813]

Work Play Drive I have an Airaid intake which is not contained within an air box, yet still not not easily exposed to moisture/rain. If you take out the center section from the headlight, it’s a direct open line to the exposed filter. Would take a decent amount of rain to cause hydro lock, but not worth the risk.

[@robertehrler475]

Looks great you've done some really cool stuff to your car!!!👍😎 Quick question where does your oil temperature run!! I have a 2017 RT Scat Pack and it seems like it's always around 225-230 degrees!!!

[@WorkPlayDrive]

Thank you ☺️. 225-230 is within the operating temps 👌

[@robertehrler475]

Thank you. Play Drive

[@FullToretto]

Are you working out a discount code with Merrick?

[@WorkPlayDrive]

Not at this time he’s got a free shipping code tho - SHOWUSURHEADLIGHTS

[@Modsnake98]

Not my particular cup of tea but def a clean product and fit. As always another awesome vid.

[@WorkPlayDrive]

Thank you and thanks for the respectful comment. 💪

[@Riveraharry75]

Sold😁

[@WorkPlayDrive]

man I said Hide your wallet :D

[@Riveraharry75]

Lol... couldn’t wait for video to end... on order 👍🏽

[@Riveraharry75]

Work Play Drive ...ooops😁

[@WorkPlayDrive]

😂

[@srsig0]

Looks great

[@filaHemilife]

You see I have a magic unicorn in my engine (that’s where my 🐎 power comes from) and I’m afraid he will get out thru that opening or something could get in thru that opening

[@livinlavidalopez2481]

Great video!

[@WorkPlayDrive]

Thank You 🙏

[@MojaveKY]

Really sharp !

[@WorkPlayDrive]

You want a mopar yet or do I need to try harder. 🧡

[@justinburnette3843]

Do you mind measuring the OD of these pieces? Im looking into 3d printing these but cant fit my caliper inside the duct hole.

[@WorkPlayDrive]

Sorry, not interested in helping with copying a person's design.

[@daytona5.722]

I like them, looks good!!

[@WorkPlayDrive]

Thank you

[@tundrahog]

Geeze, no offence... Why does the Demon(race gas) and the Redeye(same pump gas that I run) make more HP....yes different components, but air intake is one of the biggest factors. Demon and Redeye have different air intakes. Designed for more CFM.... Air intake makes a difference.

[@DSWJoyrideProductions]

Realized YT removed you from my support! Fix that! Nice video!

[@WorkPlayDrive]

What did they do now 🤦‍♂️

[@DSWJoyrideProductions]

Supposed to be "fixed that"... the algorithm unsub me from you... spent a while yesterday going through and figuring out who the 50 people who got unsupported by me from YT... its really annoying...

[@WorkPlayDrive]

I had that happen a few times. So annoying and it’s people I watch too.

[@JuicePO8]

they look great

[@EarAche123]

"Hide your wallet" haha love it man, ain't that the truth!

[@WorkPlayDrive]

Truth!

[@dalemeyer5363]

Bummer, they won't do custom colors. Love the look though!

[@WorkPlayDrive]

They do Custom colors www.ecwid.com/store/merrickmotorsports/2015-2019-Challenger-Headlight-Intake-Rings-Custom-Color-Orders-Set-of-2-p106006156

[@jermur8053]

Reduce the CFM of your intake tube, smart one.

[@WorkPlayDrive]

How is that an issue on a car that: 1. Didn’t have this as an intake from the factory 2. Has a giant shaker feeding the intake

[@TheRealCRV]

Can people just walk up to the car and steal these off of it? Im interested in buying them, but i live in a sketchy area lol

[@WorkPlayDrive]

Sadly yes you can slide these out with a few seconds of wiggling them. you may want to keep them in the trunk when not showing off the car.

[@TheRealCRV]

Work Play Drive thanks for the advice! Just bought a pair. I’ll make sure to follow it.

[@bigfly_214]

i hate you can use the screen with them

[@blackmustang904]

Nice

[@BBHemisnJets]

Hey WPD - Don’t forget about the added possible Challenger light bling - halo lights! kzbin.info/www/bejne/fnbRhHyuj7t5abc

[@WorkPlayDrive]

Looking good 👌I just installed these ;) instagram.com/p/Bp57CwsFLlE/?igshid=19a43q6c26pn1

[@hiltonkaskela2820]

Idk they dont do a damn thing.paint ur cap the color u want or just have nothing

[@johnnyx970]

That product reduces air volume. Just saying. Heck, your car, your choice.

[@WorkPlayDrive]

The 15 Scat pack headlight intake is closed off, I opened the port, installed the intake tube, even with the 1mm loss if space i'm still benefitting from an intake port that was not there from the factory.

[@johnnyx970]

I stand corrected. Thanks.

[@Hemifam]

Hide yo wallets peeps! 😬

[@WorkPlayDrive]

Werd 🤟

[@jayg3069]

Gray, black, and orange do not go together😂

[@WorkPlayDrive]

of course they do...