Installing Luxe Lightwrap FX Mid Honeycomb on my Challenger

[@hellcatm6daily320]

This is the third video of yours that I’ve seen. I’m thoroughly impressed. I appreciate the mature nature of your content. No gimmicks or clickbait. I thought that all of the adults had found the exit from the car community. Good job making our cars look good. Subbed!

[@WorkPlayDrive]

Thank you 🙏 tryin’ to keep it clean an honest. 👌

[@Cristoast]

I really love how thorough you are with your work, showing everything and advising how we should do it as well. Definitely referring back to these videos when I take delivery of my '19 charger scat

[@WorkPlayDrive]

Congrats did you go wide body?

[@daywalker3925]

Damn, I wish you posted this video 2 months ago. I went to a shop to have my tail lights tinted, and they did a horrible job. You the man when it comes to customizing!

[@WorkPlayDrive]

Thank you, I try to save guys like me from shop horror stories... ;)

[@mikebythesun]

Looks fantastic. As always, you’re setting the standard for quality installs and quality videos. Hats off.

[@WorkPlayDrive]

Thank you!!

[@jaydailydetailer]

looks amazing!!! i also love the look of the red on the tail lights, personally i think they shine through just enough to get that effect at night. nice work great video

[@WorkPlayDrive]

Thank you!

[@fiouable]

As soon as the light one is available, I'll buy along with the tape. Expensive, but it will protect the plastic from scratches. It does scratches easily.

[@WorkPlayDrive]

awesome choice I think that light smoke will show some red, which may in turn show more honeycomb with the lights off. I cannot wait to get some. Be sure to note I updated my recommendation on the tape, finish line is better with the New LightWrap, there have been reports that design line sometimes snaps because it's so thin. I put the correct link in the description.

[@Aliain12]

I to want to see more of the red. When the lights on the hex looks super clean

[@WorkPlayDrive]

Gotta grab the light smoke then, more visible red from the tail lights and the hex is more visible.

[@Huggiebearups1]

I like it great video I just did mine the other day in FX Carbon fiber and I love it!!! Thanks again for all that you do for all of us my brother😁

[@WorkPlayDrive]

Thank you!

[@cubert_72]

This is pretty cool I might install this on my challenger Scatpack widebody

[@demdg4]

You should have way more subscribers. Top notch content!

[@WorkPlayDrive]

Thank you! ;)

[@jaesondollar6474]

I’m bringing my Challenger to you. You do amazing work

[@WorkPlayDrive]

Lol thank you but I’m not an installer at this time. Maybe some day tho...

[@jaesondollar6474]

Work Play Drive I know I would be a customer 😁

[@dalemeyer5363]

I agree, the light smoke will look much better

[@WorkPlayDrive]

It’s on order just waiting for them to laminate and ship 👍

[@BLACKHEAT1028]

As always great step by step and what to expect. Now that looks sharp

[@WorkPlayDrive]

Thank you!

[@RoundSixPodcast]

Looks absolutely perfect! Always appreciate your very detailed install videos!

[@WorkPlayDrive]

Thank you 🙏

[@MeanBee392]

That looks so good! I think I might need to do this to my car! As always great video and very instructional! I gust can’t get over how awesome this looks!

[@WorkPlayDrive]

Thank's man, I'm loving it!

[@154lockwood]

This looks great!! By the way very informative videos I'm new to the channel but already a fan

[@WorkPlayDrive]

Thank you 🙏

[@Hemifam]

Honey comb FTW! 💪🏼

[@WorkPlayDrive]

;)

[@EastCoastYoungGun]

Sick. Getting that for the Scatpack. Matches the hex/honeycomb interior. SHWING. Details like that set the car off.

[@WorkPlayDrive]

Shwing 😂😂

[@YingYangStang]

Nice job - and the product is extremely easy to work (very forgiving) I have it installed on my 2019 Wide Body

[@WorkPlayDrive]

Absolutely it's such an easy vinyl for the first timer as well as the pro.

[@cowboyburley1]

Love it! Thanks for the video, and we both have the same idea so I'll wait on the light smoke honeycomb 🤙

[@WorkPlayDrive]

yup I'll be putting it on as soon as they can release it to me.

[@williamkeeler6408]

Turned out great! I'm going to try it! Thanks

[@WorkPlayDrive]

Thank you 🙏

[@Antho-R22]

Looks great! Making me miss the ole ws6!

[@WorkPlayDrive]

One of the reasons I went with this pattern 💪

[@QlueGaming]

I like that look when it's lit up. Not a fan of the dark loom when it's not lit though. I can't wait to see the light smoke

[@WorkPlayDrive]

Same here man I want my red back ;) they should have the new shade very soon.

[@noneofficial305]

You be getting it in!?!.....question so it just pulls off?

[@WorkPlayDrive]

Yes it easily peels right off in one piece with no residue when the temperature is above 70F below that the vinyl tends to not want to cooperate. I've swapped i out recently with their new fades kzbin.info/www/bejne/lZ-QoJt9hdqhp9E

[@monsterjambrony]

I don’t think I would cover the brake lights, but I would definitely put on the honeycomb pattern on my taillights.

[@WorkPlayDrive]

Same here with the mid smoke the 2 layers is too dark for my taste. I have some light smoke coming soon.

[@monsterjambrony]

Work Play Drive But didn’t you cover your taillights in this video?

[@WorkPlayDrive]

Yep I pulled it off. A lot of people like the fully blacked out look. Me personally I like to see a little red so I’m going with Luxe light Honeycomb.

[@Riveraharry75]

They look 👀 great 👍🏽 Another awesome video.

[@WorkPlayDrive]

Thank you 🙏

[@ModFXCustoms]

Great installation! I love the Honeycomb on my Superbee -Randall

[@WorkPlayDrive]

It's gotta look insane on those big pre 2015 tails. Get some pics up on your insta!

[@daytona5.722]

Great job on this install!! Looks good, I agree with you, I would like to see a little more red, I will be looking forward to the light smoke install!

[@WorkPlayDrive]

Hopefully in the next 2 weeks ;)

[@hellcatredeye-g6582]

Looks really good .I think I’m gonna keep the red I’m afraid somebody might hit me in the rear 😏👍

[@WorkPlayDrive]

I personally like the red as well. I’m installing this kit next week instagram.com/p/BrBOEhIls7U/?igshid=1ukjeaqs2xyjf. I had it on my scat pack and loved it.

[@j6936-d6v]

For inspection and reverse camera reasons, how much does the center strip tint affect the lights?

[@WorkPlayDrive]

Inspection may be an issue depending on the state. No noticeable impact the the reverse camera.

[@brianpreston3052]

Really cool product.

[@WorkPlayDrive]

Agreed :)

[@charlestillman2823]

Nice work man

[@WorkPlayDrive]

Thank you 🙏

[@waledali434]

subtle but awesome touch

[@jeffreynye3019]

Were you using MgGuiers spray wax to clean with? Just asking....

[@WorkPlayDrive]

For the clay process I use either spray wax or suds as a lubricant. Before applying the vinyl I remove the grease and wax with a 60/40 Isopropyl and water solution to make sure nothing impacts the adhesive

[@HooverTuber]

I love the smoked out look, but I’m concerned about the reduction in brightness, especially in the daylight. Looks like it reduces brightness by half almost. I would retrofit to a brighter led kit if I was to do it I think.

[@WorkPlayDrive]

Don't forget there is a lighter grade of tint as well (which I have on order) I also doubled the tint on the brake and reverse light, now in hindsight it was not necessary with the mid smoke honeycomb. The brake lights are still fully visible in the daytime even at a long distance.

[@joeyouchoff6907]

Looks awesome, lol guess i found one of my next projects for the yellow jacket. Lol Keep up the the great vids brother!!!

[@WorkPlayDrive]

Thanks brother!

[@OmarLegz]

Awesome walkthrough! Planning to do the same. But is there such thing of over heating? When using the gun.

[@WorkPlayDrive]

Yes, I don’t recall the temperature, but you can find more details on the luxe site. I try to stay around 180. If you are looking for a really good detailed video on this check out this one kzbin.info/www/bejne/emLUh3ytgtKFlbs

[@RogerJG21]

How dark did you go on your side markers

[@WorkPlayDrive]

I went with the dark smoke so none of the color from the lights bleeds through. you can still see the reflectors when the lights are off and they lights are still visible at long distances. the tint in this pic is dark smoke with Brushed metal instagram.com/p/B76L6EOl7HI/

[@TheMselbetito]

Looking amazing I from New Jersey I have a challenger do you think can you do this for my car

[@WorkPlayDrive]

Sorry man too many things going on at the moment

[@TheMselbetito]

Thanks for the answer hope one day we meet in a car show great job in your car

[@WorkPlayDrive]

I often put up the shows I’m attending on Instagram and my Facebook. Feel free to give me a follow the info is in the video description 💪 see you soon maybe 🤔

[@MPoppster16]

What were the measurements that you ordered on the site? Would 20” * 2 yards be enough for both tail lights?

[@WorkPlayDrive]

20 x 1 is perfect if you cut it how they recommend on the product page. If you are a beginner I recommend 20 x2 so you have the ability to make mistakes.

[@Ectopilot]

Enjoyed this video... so needing to do this.

[@WorkPlayDrive]

Yeah ya do 🤓

[@Pnwliving3392]

Do they make any for the SXT 14 Challenger?

[@WorkPlayDrive]

Yep precut clips like this kzbin.info/www/bejne/lXycqqOkaZh5e5I or you can install the full lightwrap in this video.

[@edgarescobar7830]

I had one question did you buy one or two honeycomb tail light tint. Because I bought mine but wanted to make sure if I needed one more or if one is enough for both tail lights. I would really appreciate it

[@WorkPlayDrive]

I bought 1 kit and followed the cut instructions luxe provides to ensure you have enough

[@edgarescobar7830]

Thank you for replying back to me I really appreciate it and I loved your work that you did to your car and I wanna do the same to my scatpack

[@WorkPlayDrive]

Edgar Escobar thank you 🙏

[@esmeealvarez7]

Do you NEED heat for installation?

[@WorkPlayDrive]

Absolutely here is a full how to video on lightwrap kzbin.info/www/bejne/emLUh3ytgtKFlbs

[@wwewewaeawdasdw]

I like to do this in my 14 challenger do u think I can do that?

[@MrBraulio899]

What kind of size is that . I’m trying to buy some but I only need the tail lights . I don’t know if it’s the 20 x 1 yrd or 20x 2yrd or 20x 3 yrd

[@Anthonio2287]

I see you are in Jersey I’m in Philly how much for you to apply these wraps to my Challenger?

[@WorkPlayDrive]

Sorry I’m not currently insured to work on other people’s cars.

[@jackslewa4122]

What size vinyl roll do you recommend is enough for the challenger?

[@WorkPlayDrive]

Here is a direct link to the kit for the challenger bit.ly/3sUn5aD 20" x 1 yard. If you scroll down on the page it shows you how to section the vinyl in the "Project cut guide" section

[@mickster2330]

@@WorkPlayDrive Great video! So 1 sheet will complete the entire back lights? Or does 4 need to be ordered?

[@WorkPlayDrive]

1 sheet 20” x 1yd Here is a direct link to the kit for the challenger bit.ly/3sUn5aD 20" x 1 yard. If you scroll down on the page it shows you how to section the vinyl in the "Project cut guide" section

[@mickster2330]

@@WorkPlayDrive thank you! My husband and I have gotten some GREAT idea mods because of you. The companies you have mentioned have great products can't say too much because we've noticed people in our area don't have these mods and we want to be the 1st 😂. Thanks again. If interested my husband has a channel @NightRyda707

[@WorkPlayDrive]

Glad to help and I’ll check out your videos soon 💪

[@badimpulses17]

This probably a silly question. Can you install it wet?

[@WorkPlayDrive]

Nope this is not a wet apply film.

[@mopardriver345]

Great video, what part of Jersey are you in?

[@WorkPlayDrive]

Norther NJ

[@mopardriver345]

Work Play Drive Flemington here.

[@dhowting]

Couldn't you close the trunk when you do the hex film and wrap the whole section with one larger piece of hex so the pattern lines up perfectly? Put the knifeless tape all the way around and cut the seam between the lights with a blade. Put the tape on before you spray......you wasted about 18 sprays lol

[@kevinmurphy5132]

Yup

[@corteezyrt]

will i be able to get the brush metal kit for my challenger?

[@corteezyrt]

or do they give you a strip?

[@WorkPlayDrive]

Depends on what you want. If you want to black out the whole tail section you would order 1 yard and apply like mine. If you only want to cover the center area you buy the strips. I applied both only because I wanted lighter tint on the outside and darker in the centers.

[@ShootingSportz]

How hard would you say this was to apply? Scale of 1-10

[@WorkPlayDrive]

If you have laid vinyl before it’s a 5 if you have never laid vinyl on a non flat surface it’s an 8. John does a great job on this video showing you how to install. kzbin.info/www/bejne/emLUh3ytgtKFlbs

[@endzie]

Thanks for all of the replies, and helping the Mopar community!

[@WorkPlayDrive]

Thank you 🙏

[@Lol-dam]

That looks sick bro

[@WorkPlayDrive]

Thank you

[@hemijl8304]

that honeycomb looks good.

[@WorkPlayDrive]

Thank you!

[@mlunden11]

Looks awesome. Great vid. Thanks

[@WorkPlayDrive]

Thank you!

[@LEO1WOLF]

Instantly lik'd & sub'd, as this is a very well done instructional! Had you any honeycomb tape leftover - - how do you think it would look if applied to the "Halos" please? I like running with the amber/orange all day driving lights, as that's how my Challenger looks best. I have a 2016 Challenger, Bright White SXT & it might look cheesy (on the Halos), but I'm hoping it MIGHT give it a "blood-shot eyes" appearance. Cheers from Aurora, Colorado! -Lone Wolf

[@WorkPlayDrive]

Not sure but luxe makes kits for the head lights and ambers and I had dark smoke installed, it was awesome. i.imgur.com/5rxTQAh.jpg

[@WorkPlayDrive]

... and Thank you

[@LEO1WOLF]

Work Play Drive - - Thank you very kindly!

[@Cheeseburgerperson141]

I bet if pontiac and trans am were still around they'd probably would of done something like that to a new trans am

[@WorkPlayDrive]

It needs to make an official comeback on the consumer market. I love the ones they are making from the Camaro frame, but that price is a bit steep. I'm going to wait a few more years then nail a nice 4th gen in Black or red.

[@hehellforthat7552]

Nice! Awesome job.

[@WorkPlayDrive]

Thank you 🙏

[@maldo72]

Nice when can u come over to do my car lol

[@WorkPlayDrive]

Luxe needs to get some local installer up here ;)

[@maldo72]

Work Play Drive I think you found your calling lol lol

[@WorkPlayDrive]

If only I had the time...

[@jeffreynye3019]

I like it ALOT!

[@WorkPlayDrive]

Thank you

[@scatpack1381]

That's it I'm buying a house next to you. Lol.

[@WorkPlayDrive]

Would you believe the house next to me just got sold after over a year on the market

[@scatpack1381]

Work Play Drive the house I bought was empty for 3 years it was a forclouser. Got a great deal 6 years ago.

[@JD-rn4om]

Looks nice 👍🏽

[@WorkPlayDrive]

Thank you 🙏

[@rickrick7771]

Must have great job

[@WorkPlayDrive]

Thank you

[@Im_Still_LightSpeedLayne]

BEAUTIFUL!

[@WorkPlayDrive]

Thank you 🙏

[@Invrexs]

Gon do it on my hellcat

[@WorkPlayDrive]

Go for it 💪

[@UnknownUnknown-ed4ld]

I am 13 I am going to turn 14 in June, but when I turn 16 I am going to get a challenger and I am going to Install that.

[@WorkPlayDrive]

Awesome! It's never too early to know what you want.

[@mlk4life]

love it bro.

[@LorenKyleDiedrich]

Pontiac did it back in the 90's

[@WorkPlayDrive]

I know I’m a huge fan of the firebird 👍

[@fuchsbau2768]

Looks amazing!

[@WorkPlayDrive]

Thank you

[@IjohnnyproI]

Excellent video as always. Very detailed. Like #87

[@jeffsnyder5456]

Why black out your reverse lights

[@WorkPlayDrive]

It looks good with minimal impact to the revers lighting and no impact to brake visibility day or night. Many newer cars are coming with their tail lights blacked out already

[@jeffsnyder5456]

I like the look. You can still see well while backing

[@jeffsnyder5456]

I really like the honeycomb

[@WorkPlayDrive]

Yes no issues with backing up. Even in areas with no street lighting. Check out this video at five minutes and 30 seconds in I show the lights through the darkest tint they offer. kzbin.info/www/bejne/lWWohGeAfJKqsKs

[@wbuck56]

You did a good job. Only problem I have with your video, is that you didn't start the car. Let her breathe.

[@billyowen6672]

What Scat Pack said!

[@WorkPlayDrive]

Lol I'd love to have a street filled with Mopar neighbors. Imagine a world where you don't need to worry about Idling your car or how loud your exhaust was when you left the driveway.

[@nathantv8257]

I love it

[@briggsneal1016]

I F🤬 mines up today, I have to reorder and try again

[@WorkPlayDrive]

It happens :(, how bad? I've gotten it stuck together and looking terrible but I slowly peeled it apart, pulled, heated and it returned to normal.

[@briggsneal1016]

Work Play Drive messed up the corners, just couldn’t stretch out the creases

[@CIA_Alien]

Sweet! Did you dye your seat stitches yet? Looks bad... Ass...

[@WorkPlayDrive]

no, what is this seat stitch dye you speak of? I'm interested.

[@CIA_Alien]

Go to any craft store and buy a 'fabric painting marker' of your color choice. I went with red because I have black seats looks amazing. I have a lot of plans with this ride cosmeticly and performance. If you want some details hit me up... I promise you will like ;)

[@CIA_Alien]

Forgot to mention, if you have fabric seats be more careful... If you have leather you have NO worries. Just work 12" at a time and rub off excess with rag or paper towells. Windex "Something not to strong" should be ok... I just used paper towels had no issues.

[@liheath558]

good stuff

[@WorkPlayDrive]

Thank you

[@rsquall79]

Fire flame

[@WorkPlayDrive]

Birdman?

[@tflnorthamerica4585]

Wicked!

[@WorkPlayDrive]

Thank you 🙏

[@OpCharlieBravo]

Damn, 50 bucks for the smaller kit.

[@ChrisYoungGunn]

Nice

[@WorkPlayDrive]

Thank you!

[@15DurangoRT]

Precut strips would have better.

[@WorkPlayDrive]

They sell pre-cut strips for the center but you cannot pre cut a full tail light.

[@bumperxx1]

iam still trying to figure out why i am still watching this when ill never buy or lease a 60k car ?????!!!!....>>>>

[@WorkPlayDrive]

Challengers range from 20k and up so there is always hope 😋

[@bumperxx1]

@@WorkPlayDrive i have a 100th edition 2014 full leather sport leath wrap steering wheel, alum hand pat shift full leather 2 tone brown stiching, heated seats, premium alpine sounds, sport mode button all under a good old stx 3.6vvt v6 got it as a 2nd owner 2019 with 51k miles at 14k so yea payments are cheap like 200 insurance is 180 a normal 350-450 car payment tota. so ill never afford a hell cat or a 392 all them payments would be 700-1000+ and besides its my daily driver so..... i will need a 2nd one to do all the cool stuff to it but another car payment would break me. so... yeah like i said hope and dreams hopes and dreams. and considering what you dumped $$$ in yours yea your reaching 75k fast

[@WorkPlayDrive]

Love the 100ths It took me a long time to finally get the car I wanted and the best part is as you get older the insurance costs much less 👍

[@mauriceandrews2723]

$$$$$$$$$$$$$$$ Money, Money, Money, Mo-Ney! 🤩😘

[@angelamauro1521]

Very nice!!!! LQQkS great

[@WorkPlayDrive]

Thank you!

[@user-nj2wk2ec2b]

Stickers. On your tail lights. Ok.

[@WorkPlayDrive]

Comments without a purpose. OK.

[@user-nj2wk2ec2b]

Work Play Drive not my job to teach you.

[@WorkPlayDrive]

😂😂

[@groundzero270]

A+ channel brother! I used your vids for my mods. Please check out my Hellcat vid.

[@WorkPlayDrive]

I got you queued up in my watch later list ;)

[@groundzero270]

Work Play Drive just the one vid for now but love your content. New shifter coming soon!

[@jacashalot3441]

2 much work not enough results

[@jameswade6453]

Very Nice, the lite smoke is what I would want also... Good Stuff. IG crazy4mopars

[@WorkPlayDrive]

It should be out soon! I'm already following you brother ;)

[@mad0uche]

55$ for a decal no thanks

[@Hunmbre]

Jake Paul lost uncle

[@WorkPlayDrive]

Uhhh no