Metal Masher Moab 2019 - Reckless Wrench Garage

On day three of our trip to Moab, we ran the trail called Metal Masher. This was a great trail, full of hard ledges and really awesome views. Notable obstacles on Metal Masher include Rock Chucker and Widow Maker...but if you're in a jeep, almost everything is a notable obstacle.
Support the Reckless Wrench Garage; hats and stickers:
www.recklesswrenchgarage.com
Check out our Amazon Store:
www.amazon.com...
Want more details or have more questions, send us an email
[e-mail]

[@wildbillfitz]

Sweet intro

[@julianchavez3372]

Cool footy. I cant wait to get my sub on the trail.

[@mygarden365]

Man, that ledge at 9.49 shot was super!

[@hongmihnhahn7081]

Your radius arm-square body is really nice 👍

[@Jonesz24]

Well the ranger needs full width axels and the front moved forward . Also we usually have our winches hooked to front axel so that you can suck the front of the rig down low which helps out .

[@RecklessWrenchGarage]

We may add a suck down winch later on.

[@jmetcalf6350]

Just finally finished the last 1/2 of this. Cris! Dude! How did you let that happen?

[@RecklessWrenchGarage]

What a slacker! 😆 Let what happen? Not make it up the wall, or get lost, or bend my bumper?

[@bamastead5126]

Great vid guys !!! Anyone else notice Matt from bleepin jeep at 6:25 lol

[@davidbauman7234]

Should have tried the line all of the way to the right on Widowmaker ,drive over the center of the big rock to the right of the line he was trying at an angle and turn passenger as you climb. Sometimes works for longer wheelbase, but you need good articulation.

[@jimpiper3693]

Awesome video Thank you. Bitchin rigs ! Cool burb.

[@johngreene6783]

Did I see the old postoffice jeep from one of the other powerblock shows? Can't remember which show

[@DirtGarage]

Awesome! Metal Masher looks awesome. I'll have to add that to my must hit trail list when I find my way back to Moab next year!

[@raymonde.tanneratomic-rc9370]

Love take my tacoma out there,

[@extraordinarilyaverage9660]

I agree with the kick ass intro. Editing has really been stepped up, great job guys! Great video!

[@julianchavez3372]

Oh i bet chris was pissed when chris made widowmaker!

[@RecklessWrenchGarage]

Not even a little bit.

[@kaui56]

looks so fun. that 360 camera view walking on the edge of cliff was a sick view!

[@chennemeyer]

The Stuburban did amazingly well, made other areas look effortless, no one design is good at every obstacle, but the Stuburban is close. So great to see something creative and new opposed to all the same Jeeps over and over

[@cesarcastelo5118]

Qué buena ruta y excelente vídeo! saludos desde Cln Sin.

[@boardbysled]

Great video guys, look forward to them every week! Good motivation to get out into the shop and work on my crawler.

[@randumadventures]

Wow great driving Chris! I don’t know if I’d even have the balls to try that in my truck!

[@markottinger]

Its ok Kris the stuburban is still badass!

[@benhightowerv]

The Ranger showing it's a beast yet again. Love that thing

[@MattPratt]

Great intro. Glad to see some interesting rigs rather than more bolt-on cookie-cutter JK/JLs.

[@bahndrvr]

Good spotting at 8mins..

[@unlimitedljadventure]

I love your videos, keep them up.

[@slcbodyshop]

Chris what is the axle to axle on your suburban.

[@RecklessWrenchGarage]

The wheelbase is 129.5”.

[@uhligfabrication8061]

I think a hand brake would help the ranger out alot.. sick video.. can't wait to wheel with you guys next year..

[@Twostroke666]

I'll have to hit that trail next time! Great vid as always

[@adiriko]

Manual or Automatic? What is better for off-roading?

[@RecklessWrenchGarage]

That is purely preference. There are pros and cons to both, but it will always come down to preference.

[@wannago2moab]

Poor Kris.... lol awesome video guys! I wonder if messing with your anti-squat would help on the steep stuff in STUBURBAN? Or it might just start unloading the front end.... 🤷🏻‍♂️ either way that thing is ridiculous!

[@tylerjones6039]

Where you guys from?

[@RecklessWrenchGarage]

We are in NM.

[@Alex-ku6xe]

love the video! that burban is impressive

[@therealtimmymctimface]

OL STUBBY SUBBY MAKING IT LOOK EASY. TO BAD MY TRANS WAS BROKEN AT THAT POINT OTHERWISE I WOULD HAVE HIT SOME OF THE HARDER STUFF. THANKS FOR INCLUDING ME AND THE WIFE IN THE VIDEO! I HAVE THE POSTAL JEEP

[@RecklessWrenchGarage]

I don't know if you noticed, but not many Jeeps made the cut lol. You guys know how to drive and have cool rigs 🤘🏻

[@MarkMicallef]

Kris, that means you must go to 44's to compensate for the longer wheel base

[@gabewhisen3446]

44.5s

[@bahndrvr]

Chris - you need a hand throttle on your Shift knob - I used a gear selector from a mountain bike and never died or rolled back again!!!!

[@bahndrvr]

Balls at 18:00!

[@RecklessWrenchGarage]

It has one now, just getting used to using it.

[@Liberty_Offroad]

Interesting. How is that any different than putting your foot into it?

[@RecklessWrenchGarage]

It let's you take your foot off the gas and only worry about the clutch and brake

[@christopherbrown8660]

I believe in you Kris. Next time. Not everyone has that special tractor mode like Chris. 🤣

[@SergeantRLLC]

rear steer on the stubburban next?

[@RecklessWrenchGarage]

It’s been considered a few times, but it’s not on any list at the moment.

[@gabewhisen3446]

Violin playing as the stub bypassed LMAO

[@hammeredscout]

Great video👍🏻I sped it up though. Subbed😎

[@RecklessWrenchGarage]

How dare you speed it up! Now you must go back and watch it all at the original speed. 😆

[@yotalover8480]

I really enjoy your videos not a lot of talking or crappy music to have to mute. Maybe we'll see you on the trails in moab someday

[@jameswriston6952]

Man i need to 4 link my YJ

[@RecklessWrenchGarage]

Do it!

[@phemmeke]

The Burb needs some hydraulic crab claws

[@JsGarage]

You guys been using go pro fusion now or something? How you like editing with it if so?

[@RecklessWrenchGarage]

The 360 cam is the insta 360 one x. Editing is pretty easy

[@Fattrucker]

Kris might not have gotten up Widow Maker . But at least he didn't stall the damn truck on EVERY obstacle Chris ROFLMFAO Fattrucker

[@PeterPiccolo]

hey there wanted to ask around 10 minutes in when ur walking the edge of the cliffs edge and it has a sphere globe effect to it... is that possible to capture with the new gopro black7? or what camera are you using to achieve that effect? also is there any way i can create that effect using my new gopro hero black 7? i greatly appreciate it.. and im loving the awesome footage you were able to capture... please help me out i would love to add that globe type effect to my videos to change things up a bit here and there... thanks again god bless... keep safe, -Pistol Pete

[@RecklessWrenchGarage]

All of the cliff shots were filmed on a 360 camera, ours is the insta 360 one x. You have to have a 360 camera to get a shot like that. All of the intros to our Moab videos have been on 360 cameras as well. I recommend the insta 360 one x 👍🏻

[@Liberty_Offroad]

@@RecklessWrenchGarage that is the sickest footage I've ever seen. Fantastic!

[@ottisgoodluck2840]

Hey, how does one dove the bed of a Chevy truck bed out? Any tips or website?

[@RecklessWrenchGarage]

Figure out how wide you want the rear, where you want the taper to start, draw lines, cut along those lines, pull the sides in, weld together. Look at the hood of the Stuburban and that’s about what the floor would look like. The bedsides will just need relief cuts..depending on how far you go with the taper. There are quite a few forums with quite a few people showing how they dove a bed.

[@ottisgoodluck2840]

Awesome. I’m gonna attempt to cut the bed Thanks. 👊🏽

[@thomassmith1753]

Need to 4 link my sub now, nice video Also first

[@vinnieangelo2888]

piss poor spotting

[@RecklessWrenchGarage]

😂 when?

[@vinnieangelo2888]

exactly

[@RecklessWrenchGarage]

Thank you for such a useful comment...? 🤷🏻‍♂️

[@milfs310]

What size tires on that ranger?

[@RecklessWrenchGarage]

37x12.50

[@Cwn808]

It wasn’t because it was too long . More wheel speed and lil more hp u would of made it

[@RecklessWrenchGarage]

If I would have stayed further left like the first try, I would have made it. Don’t need more power to make it up.

[@ClimptonDiddlehopper]

That was Titanic like....just as I type this here comes the pan flute....bwahahaha