Metal popper tutorial, how to attach metal Press Stud Poppers, diy, PRONG PRESS PLIERS, Anita Benko

[@achromaggie]

You just saved my life 😭😭 the snap pliers I bought came with instructions but if you're not familiar with the names of the parts it's like reading a different language, thank you so much!!

[@AnitaBenko]

@@achromaggie awww ❤️🙏🏼 glad it’s helpful 🙃🌞✨

[@lapatti]

Thank you so much for the tutorial, it's just what I needed. I'm going to watch it a million times because I keep forgetting which one goes where and facing up or down.

[@AnitaBenko]

Awww- thank you so much. ❤️🙏🏼😊🌞🌸✨

[@Victoriousleaw]

This was the best illustration on how to apply snaps to fabric!!! Simple and easy. Thank You Anita :)

[@AnitaBenko]

❤️🙏🏼 Thank you so much. 🙏🏼🌞Glad it’s useful 👍🏼😊✨

[@paulinehughes8548]

I have to agree with you. Others chatter way to long x

[@bobbybeeman7280]

The simplest video instruction I have ever encountered. Thank you ever so much hope you are having a very joyful successful life.

[@AnitaBenko]

@@bobbybeeman7280 awww 🙏🏼 thank you so much. 🙏🏼 Glad it’s helpful 😊👍🏼 You too 🌞✨

[@SewingSister25]

Thank you very much. Mine came with no instructions so without your video I would not have known how to use these snaps. The clear camera views and your clear descriptions were excellent.

[@AnitaBenko]

@@SewingSister25 awww ❤️ Glad it’s Useful. Thank you Very much 🙏🏼🌞✨

[@sumanjha3665]

Mine also

[@amandabox7052]

Thank you for your very clear instructions. I now have to learn how to align the studs to match where they need to go onto the fabric.

[@amandabox7052]

I have just seen your equally fantastic video about how to align the studs. ❤Unfortunately the cheap Temu pliers do not have a hole drilled through to enable you to see the markings. I have learned two things today 😂

[@AnitaBenko]

Aww glad it’s helpful. 😊 Here’s tutorial how to align these poppers (it’s a short sample tutorial): kzbin.info/www/bejne/hHPCmZihr5Wdbcksi=h55Rzrf8jWKnqUo_ 😊🌞👍🏼✨

[@AnitaBenko]

Aww- sorry just seen this comment. 🙈 Ohh- no- maybe pierce ring prong popper by hand first where the marking is. And then attach both poppers with pliers- so poppers are attached on where the marking is. 😊👍🏼

[@MUHAMMADRAFIMUJAHID]

How simply the appearantly complicated mechanism is demonstrated! Thanks from the core of my heart. Stay blessed forever!

[@AnitaBenko]

Thank you so much 🌞🙏🏼✨ Glad it’s useful 😊👍🏼

[@ijdamilola]

Thank you for the guide. I got the snap tool kit from a store yesterday and curious as to how to use it, I found your post and yes it was very detailed and helpful. Thank you ❤

[@AnitaBenko]

Thank you so much. 😊🙏🏼 Glad it’s helpful 🌞✨😊

[@ZippedUpKitz]

THANK YOU!!!!! I bought a pair of these snap setting pliers with those same snaps off of TEMU and the bloody things did not come with a single bit of instructions!!!!! I was this close to throwing the bloody things into the bin! Now I can use them! Thank you so very very very much! My mental health has been restored! 😂😂😂😂😂😂

[@AnitaBenko]

Awww 🤩😊❤️🙏🏼 Glad this video is useful 😊✨ Thank you so much for such a kind comment ❤️

[@vickymcmahon8121]

Same..😂

[@anitavisram8346]

I did exactly the same. It arrived all in pieces so no explanation on what goes where. Just about to the bin them when I decided to see if I could find any help on KZbin. So thank you very much. 👍

[@ZippedUpKitz]

@@AnitaBenko you are very welcome! I know you made this comment 4 months ago, but I just now saw it! Thank you again for making the video…

[@AnitaBenko]

@@anitavisram8346 thank you. 😊🙏🏼🌸

[@kymclinton3140]

Thank you I received my set from TEMU on Wednesday morning and no instructions what so ever so glad of this

[@AnitaBenko]

Aww- glad it’s helpful 🌞👍🏼✨

[@AlanBrown-r7z]

Great video... these have such a wide range of uses... not just garments. Thank you😊

[@AnitaBenko]

They have. 😊 Thank you very much. 🌞🙏🏼

[@ArnoldusvanderMescht]

Thank u for the demo. The tools I bought through Takealot also had no instructions. I was so grateful to see your demo used the same tools that I have 😊.

[@AnitaBenko]

Glad it was helpful. 😊🙏🏼❤️ thank you very much. 🌞

[@margaretwyeth2560]

I was pulling my hair out trying to work this tool ! Thanks for restoring my sanity!

[@AnitaBenko]

Aww- you are welcome 😊👍🏼✨

[@mariamazza383]

Same, I’m still struggling and what’s supposed to be easy to use and yet I’ve still managed to get wrong

[@AnitaBenko]

@@mariamazza383 maybe practice on some cotton fabric samples. Practice is necessary to get it right. Also make sure you attach all parts correctly.

[@SincereCharity]

Thank you!!! I couldn't find any other video that even had the same type of studs or explained it as well as you

[@AnitaBenko]

Thank you so much. 😊🌸🙏🏼🙏🏼🙏🏼

[@lostmojo]

Thank you so much. I'm gonna write your name on my review of the pliers on TEMU bc your tutorial is so clear and short, simply the best, and the TEMU pliers are good but without instructions

[@AnitaBenko]

Awww ❤️ thank you so, so much 😊🙏🏼🌞✨

[@ミカママ]

Thank you sooo much! Your tutorial just made my day!!

[@AnitaBenko]

Thank you ❤️🙏🏼 glad it’s useful 🌞✨

[@katjones4840]

Finally understand the female side! Thank you

[@AnitaBenko]

😊👍🏼

[@dianeallen9039]

Thanks for this. Hubby just bought these from aliexpress. No instructions so this video will come in very handy.

[@AnitaBenko]

Aww- glad it’s useful 🌞🙏🏼😊❤️✨ Good luck 😊👍🏼

[@lordbadgerthistle6927]

After a disasterous attempt with hairclips and pins, someone suggested using poppers for a project instead, and, not knowing how to use them, I found this. Perfection!

[@AnitaBenko]

Thank you so much. 😊🙏🏼✨

[@Rubyorado]

Just bought one of these it arrived today and no instructions 😅 so straight to KZbin I come 😂 thank you so much for this video you’ve saved me a lot of stress haha 🥰

[@AnitaBenko]

Awww 🥰 glad it’s useful. 😊👍🏼🌞

[@Rubyorado]

@@AnitaBenko thank you! 🥰🥰

[@sabinev3031]

Thank you for these step by step explained 'how to use ...' stud thingies, soooooo helpful!! Loved it, others aren't explaining it the way you did 🙂 Glad I found your channel, x

[@AnitaBenko]

Awww ❤️ thank you so much. Glad it’s helpful. 🌞✨

[@MZ-qm9ps]

I bought this snap plier few mths bck at MR DIY shop for $1+ not knwing how to do it😅 But nw i do! You've bn a great help❤ Ms Anita, thank u! watching frm Singapore

[@AnitaBenko]

@@MZ-qm9ps awww ❤️😊🙏🏼 thank you so much. Glad it’s useful 🌞✨

[@Steffi-yj2oc]

Thank you Anita. I’ve literally just bought a press stud kit with the tool from off Amazon and thought I’d watch a KZbin tutorial on how to do it. Your video has been very helpful. I need to stop my phone falling out of my work trouser pocket while I’m working. 😂😂😂 I’ll refer to it again once my kit comes. Thanks again lovely.

[@AnitaBenko]

Aww- so glad it’s useful. 😊🙏🏼 Hope you can fix your trouser pockets for your phone. 😊👍🏼

[@donnaleeah5075]

Why don't make our pockets longer? Aarrgghh! I need to make own pants to have usable pockets! I also got this tool/snaps to keep my phone in my pocket.

[@Melissa.Garrett]

Thank you. I opened the box and went 'urggh, now what?'🥺 It's much easier than I expected. Great demonstration. ❤

[@AnitaBenko]

You are welcome hun. 😊👍🏼🙏🏼✨🌸

[@brendaschauer7993]

Thank you so much you made that super easy to follow and understand.

[@AnitaBenko]

@@brendaschauer7993 ❤️🙏🏼🌞

[@geraldcrawford157]

Thank you Anita excellent demonstration

[@AnitaBenko]

Glad it’s useful 🌞👍🏼✨🌸😊🙏🏼

[@raziaudaipurwala8972]

Thank u for explaining so clearly with male n female sides n how to exactly place it on either sides , I had bought dis tool long back n tried many times n also spoiled many buttons but thnx to u

[@AnitaBenko]

Aww, thank you so much. 😊🙏🏼🙏🏼🙏🏼✨

[@nannybannany]

Holy crap I am also so happy to have found this video. I'm saving it for later!

[@AnitaBenko]

😊❤️🙏🏼🙏🏼🙏🏼👍🏼

[@MRRASEL-yi7vq]

Thank you so much for your lovely tutorial video. After watching your video I got success. Take ❤ From Bangladesh.

[@AnitaBenko]

@@MRRASEL-yi7vq ❤️🙏🏼🌞✨ thank you SO much. 🌞🙏🏼🙏🏼🙏🏼

[@MRRASEL-yi7vq]

@@AnitaBenko it’s my pleasure 🫶🥰

[@adrianbowden4439]

Anita ..... Thank you very for this excellent, clear demonstration!

[@AnitaBenko]

Aww 🙏🏼❤️ You are welcome 🤗

[@eileenhughes7223]

Perfect clear instructions - so helpful - appreciated

[@AnitaBenko]

Thank you so much. ❤️🙏🏼 Glad it’s useful. 😊👍🏼🌞✨

[@kathykirby]

i had my kit but no instructions thank goodness for youtube that we can look it up to see how to use these tools now its practice time thank you for tuition

[@AnitaBenko]

Awww ❤️ you are welcome. 🌞 good luck 😊✨👍🏼

[@loveasmr5336]

Thank you Anita.... i bought a set of these on line and they arrived today. I couldn't workout how to use them 3:56 thanks to you I can now 🎉 x

[@AnitaBenko]

Awww- thank you so much. ❤️🙏🏼🙏🏼🙏🏼

[@KrissysRoblox12345]

Thank you, you help me and my mother assemble and use it🎉😂❤

[@AnitaBenko]

@@KrissysRoblox12345 awww- so happy it is helpful 🙏🏼❤️🌞✨

[@annearmstrong-k9m]

I bought the same of Temu also so a big thank you for this guide and demonstration 😊

[@AnitaBenko]

You are welcome. Glad it’s useful ❤️😊🙏🏼🌞

[@oluwafunkeoyewumi5103]

This is short and precise. Thank you

[@AnitaBenko]

@@oluwafunkeoyewumi5103 ❤️🙏🏼🌞✨🌸

[@TheLadybughug]

No wonder mine won't hold lol! Been doing it wrong. I wish there was CC on these videos, they are so helpful!

[@AnitaBenko]

@@TheLadybughug 😊✨👍🏼🌞

[@anjanaraj4519]

Thank you so much. Wonderful step-by-step guide❤

[@AnitaBenko]

Thank you. 😊❤️🙏🏼 Glad it’s helpful. 🌞✨😊

[@philkeegan4356]

great demonstration thanks! so simple! any tips on how to align the poppers when putting on 2 sides of a blouse?! thank you!

[@AnitaBenko]

Thank you so much 🙏🏼❤️ glad it’s helpful. I will make a tutorial on it soon- and will send you a link hun. 🌞✨

[@KaatD]

Ooh yes I would love to see that tutorial too!

[@philkeegan4356]

🎉🎉🎉​@@AnitaBenko

[@AnitaBenko]

@@KaatD will make one soon 🌞✨🙏🏼🌸❤️

[@AnitaBenko]

Sorry for such a delayed reply. Been busy with my sisters wedding 🌞✨ Here’s: How to Align Press Stud Poppers tutorial: kzbin.info/www/bejne/hHPCmZihr5Wdbcksi=YTwgNikW_zjlxmaK

[@mema4437]

That was really helpful and easy! Thank you so much

[@AnitaBenko]

Aww ❤️🙏🏼 glad it’s helpful 🌞✨

[@TwinkleP-v9j]

Thank you for that demonstration. ❤️ My kit did not come with instructions.

[@AnitaBenko]

Awww- you are welcome 🙏🏼😊🌞✨👍🏼

[@adelecondron-king2365]

Absolutely BRILLIANT demo Thank You.....!!!!!!

[@AnitaBenko]

Thank you very much. ❤️🌞🙏🏼✨

[@twangthang]

Very good demo, clear & concise. Thank You

[@AnitaBenko]

Thank you so much. ❤️🙏🏼✨

[@1kimdotcom]

Brilliant video,, Well done, helped me a lot. Thank you

[@AnitaBenko]

Awww ❤️🙏🏼✨ Glad it’s useful 😊🌞👍🏼

[@craigbuchan316]

Like most here. I bought a set of these. But couldn't work out , how to use them. Thanks for the excellent vid. Just one question. Is there any trick to aligning them on the job at hand? All well and good with two bits of scrap. Would one just mark the spot one wants it to be? Cheers.

[@AnitaBenko]

@@craigbuchan316 thank you so much. 🌞🙏🏼 Glad it’s useful 👍🏼 Yes- I do have a tutorial on this: kzbin.info/www/bejne/hHPCmZihr5Wdbcksi=lbxEGdeLJslhc15a Hope it helps 🌞✨👍🏼

[@allengina1091]

Thank you so much you explain so well. I got it just watching twice.

[@AnitaBenko]

Thank you so much ❤️🙏🏼 Glad it’s useful 🌞✨🌸

[@lonapipia739]

Very good,just learn how to do it! Very straightforward and easy,thank you!

[@AnitaBenko]

Thank you so much. 🙏🏼 Glad it was helpful. ❤️😊🌞✨

[@Chuncy566]

​@@AnitaBenkocan you pry them apart and use them over again?

[@AnitaBenko]

@@Chuncy566 unfortunately not. As spikes on a popper will be set. And it will be quite tricky to reuse them.

[@1serratoviri]

Thanks, any idea how to remove the snaps once they're on, I messed up on placement 😅

[@AnitaBenko]

Aww- that’s a hard part 🙈 personally I haven’t removed them before. But try with pliers and small sample fabric piece I between (so it doesn’t damage original fabric) 🙂👍🏼✨

[@jamiejones426]

Does this work even if one side of the button has come out of the jacket? The other side is still in there and it’s a big white one and I can’t find the same kind of button.

[@AnitaBenko]

Hey, is it same style popper? If not I have tutorials on other poppers: kzbin.info/aero/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm&si=k9iiIF5eP2f2OMZJ 😊👍🏼

[@jamiejones426]

@@AnitaBenko I’m not sure but I’ll check. Thanks so much, I appreciate it!

[@AnitaBenko]

@jamiejones426 🌞😊✨👍🏼

[@humscube]

Thank you very for the video. I was struggling to put female socket. Didn't know which way is up. After a week struggles I found your video.

[@AnitaBenko]

Aww- glad to hear that hun. 😊🙏🏼🤗 Thank you for your support. ❤️

[@mirelminea4386]

Multe frumos, am luat asemănător de pe temu si era cât de probabil sa le arunc la gunoi ca nu aveam instrucțiuni de niciun fel in acel pachet. Datorită ție acum e ok.

[@AnitaBenko]

Glad to hear that 😊👍🏼🌞✨

[@behramcooper3691]

Thanks for clear and precise instructions. Do these buttons come in different sizes?

[@AnitaBenko]

You are welcome. 😊👍🏼 Yes they do. 😊

[@intanm6700]

Hi Anita..thank you so much for the tutorial video. Its a life saver❤. However..b4 I found your video i tried it on my own with some wasted bits. All the while I placed the studs at the wrong end of the plier. The one with the hole and without thingy. It still stick to the material but will it last?. Whats your advice?

[@AnitaBenko]

@@intanm6700 it should last. Keep practicing. 😊👍🏼 if I’d doesn’t- try hammer on method: kzbin.info/www/bejne/pnrSi5iai7draNEsi=YWBOGLdbfdKFjl7u

[@partnerpartner5365]

Very much nicely explained thanks ❤

[@AnitaBenko]

@@partnerpartner5365 awww ❤️🙏🏼🌞✨ thank you so much. Glad it’s useful 🌞🌸

[@samet8295]

Hi, I am planning on attaching these to the hem of my pants. since the fabric rolled there, do you think it will be harder to attach them?

[@AnitaBenko]

It depends how thick it is. If it’s thinner than spike width- it should be fine. 😊👍🏼

[@safirapatel4319]

Thank you for sharing the video I tried and it worked ❤

[@AnitaBenko]

Thank you so much. 🙏🏼I am glad it did. 😊👍🏼🌞✨

[@wolobofe]

Great video, very clear instructions. My partner bought a kit, but she asked me to learn how to use it...I had no idea. Thanks a lot!

[@AnitaBenko]

You are welcome 😊👍🏼 glad it’s useful 🌞👍🏼✨

[@MaryamArif-l6j]

3:38 it really help me a lot 🙏 Thanks 😊

[@AnitaBenko]

@@MaryamArif-l6j ❤️🙏🏼 glad it’s useful 🌞✨

[@terdenise7575]

How do you keep the press female studs and the spike bottom ring from falling out of the pliers? I have these exact pliers. You make it look so simple.

[@AnitaBenko]

You have to squeeze them together very hard two they attach to each other properly. Other method you can try is to hammer them on. 😊👍🏼 I might make hammer popper video soon. 😊👍🏼

[@AnitaBenko]

Here is hammer on technique for these snaps: kzbin.info/www/bejne/pnrSi5iai7draNE 😊

[@latnahc]

Thank you. I finnaly used mine after 2 years😂

[@AnitaBenko]

Awww- that’s great. 😊👍🏼✨

[@mariannewezelman6557]

Perfect, thank you Anita!

[@AnitaBenko]

🌞🥰😊🌸✨👍🏼🙏🏼

[@noxsinfox1222]

Appreciate the knowledge! It is most useful!!

[@AnitaBenko]

Thank you very much 🌞🙏🏼🙏🏼🙏🏼

[@giftadam425]

Hello, please if the rubber part of one of the clippers isnt available,what can i replace with it

[@AnitaBenko]

@@giftadam425 Remove other one and try hammer method using pliers without rubber rings. Here’s tutorial: kzbin.info/www/bejne/pnrSi5iai7draNEsi=Tluzqz0kVLDaS7kp Or Poke spike ring popper through fabric by hand and male/female popper place in the rubber ring side and attach them that way. Hope this helps and makes sense 😊👍🏼

[@dianeallen9039]

Having tried the pliers with some snaps I bought in a kit, I need some advice. The kit has both open ring and solid buttons. The open ring ones sit securely in the cavity of the pliers but the solid ones don’t. They move about and don’t seem to fit inside the cavity even though they are supposed to be the same size as the open rings. Any help on how to secure them would be much appreciated. Thanks.

[@AnitaBenko]

@@dianeallen9039 thank you so much for commenting. 🌞🙏🏼 It sounds like Plier have loose white rubber ring on one side. Which needs to be tighter so popper doesn’t move. But I am not 100% sure. Try holding pliers with circle popper with studs at the bottom and male popper on top when you attaching them on a fabric- like on my tutorial. Then you will have more control over open ring stud. 😊👍🏼 Hope this is helpful. 🌞✨

[@AnitaBenko]

@@dianeallen9039 Check out my hammer on tutorial- maybe that will be easier: kzbin.info/www/bejne/pnrSi5iai7draNEsi=rjZf2e73-9MshcxP

[@dianeallen9039]

@@AnitaBenko thanks Anita. Will check these out.

[@AnitaBenko]

@@dianeallen9039 good luck 😊👍🏼✨

[@BurntSpaggetti]

I'm buying a pretty fluffy scarf that I need for a costume I'm making but these snaps are all I can find for it, you see I need to make an infinity scarf that fits properly and tightly (not too tight obviously😂) around my neck for it but I'm afraid I won't be able to use these with how fluffy the scarf should be and I'm using shein to get them, got any tips or ideas?

[@AnitaBenko]

Think small snap poppers will disappear in the scarf- and it will be difficult to find poppers in the scarf. Maybe try large metal Sew on poppers- it will be much easier for you to find and close them. (Hope I understood your question right) 😊👍🏼

[@boofuls]

I reckon the thing which takes practice or judgement is the thickness of the fabrics ..for example put one on a demin pocket ,i doubt it those spikes would penetrate a demin hem ..p.s. great tutorial 😊

[@AnitaBenko]

These poppers are definitely for thinner fabric. 😊👍🏼 for denim I would choose different poppers. I have tutorials for thicker fabric on my channel. 😊👍🏼 thank you very much 🙏🏼

[@AnitaBenko]

kzbin.info/aero/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm&si=XR2K-gcoG2CU9AlK

[@clarehopkins2480]

Thank you just bought one from Temu didn’t have instructions.

[@AnitaBenko]

@@clarehopkins2480 😊👍🏼✨ you are welcome. Glad it’s helpful 🌞

[@maruleicht5496]

The ring stud seperated from the spiky ring of my skirt. Do I just buy the pliers to reattach it? Or do I have to replace it?

[@AnitaBenko]

If the spikes aren’t damaged then reuse them. If they are- then I would recommend to buy new set of poppers and pliers. Or use hammer on technique 😊👍🏼

[@AnitaBenko]

Here is hammer on technique for these snaps: kzbin.info/www/bejne/pnrSi5iai7draNE 😊

[@zarsvirus]

Thank you for the info you discuss.

[@AnitaBenko]

@@zarsvirus 😊❤️🌞✨🌸

[@niallstewart6408]

Can this be used for a thicker material 300gsm upwards?

[@AnitaBenko]

You can try and see if it works on a sample piece. 😊👍🏼

[@nekoboygames7786]

I've been doing exactly like you and have no problem snapping them together. My problem is that the side with the hole rips the fabric when I pull them apart. I've used an old cotton sheet and I don't know what I'm doing wrong. It's only the side with the hole that rips the fabric. From what I can see, all the rings looks the same in the bag. I got it years ago from Lidl. I'm so sad that a baby drool scarf I spent hours on making got destroyed when I tried the snapping bc the side with the hole somehow made the fabric rip in an almost perfect circle. I also experienced the same thing previously when I tried to fix a multi-usage plastic rain poncho. I thought it was bc it was made of plastic, but now the same happened to fabric. What am I doing wrong?

[@AnitaBenko]

Hey, thank you for your question. 😊🙏🏼 That’s very odd- it shouldn’t rip fabric apart. Maybe poppers are faulty? Without seeing it- I can’t really tell what’s wrong. Sorry. Have you tried plastic snap poppers? They are much easier to apply. 👍🏼😊

[@nekoboygames7786]

@@AnitaBenko seems yt delete my respond to you. But I have a picture posted on my 🐦.

[@AnitaBenko]

@@nekoboygames7786 I have a tutorial how to use plastic ones here: kzbin.info/www/bejne/fJKWmISNeK5jrLssi=1A62ZVmE8MCXiNyI

[@AnitaBenko]

@@nekoboygames7786 sorry I don’t have X But please feel free to send me photo on my IG instagram.com/anita_benko?igsh=MXhnOXBrOGhncGE5Mg==

[@PStorer-bu6en]

Really great video, thank you so much

[@AnitaBenko]

Thank you ❤️🙏🏼 glad it’s useful 🌞✨

[@TheDebz12]

I have the same set but can't seem to fathom it! When I open it back up, the main part (the none spiky but) remains I the pliers! What am I doing wrong? 😢

[@AnitaBenko]

@@TheDebz12 it sounds like white rubber rings are too tight. And it stops both poppers from being attached together. If you can- maybe stretch rubber rings. It takes a lot of practice to get it right. 😊👍🏼 Good luck 🌞✨

[@AnitaBenko]

@@TheDebz12 maybe try hammer on method. Here’s tutorial: kzbin.info/www/bejne/pnrSi5iai7draNEsi=I8Eeab1u7Q7wmPKQ 🌞

[@TheDebz12]

​@@AnitaBenkoHi - thank you! I will give it a try! 😊

[@AnitaBenko]

@ 😊👍🏼✨🌞

[@moonylight8807]

Hi thank you for explaining🥰🥰 however, whenever i try to push hard it doesnt place it at all.

[@AnitaBenko]

Thank you very much. 😊🙏🏼 Maybe try hammer on method. I found this video for you: kzbin.info/www/bejne/mGKcpWtqaqyogNU

[@moonylight8807]

@@AnitaBenko thanks a lot for your help!!🥰🥰this is really helpful. Keep going!!🥰

[@AnitaBenko]

@@moonylight8807 thank you 😊🙏🏼

[@knittingcrochetandsewingwi7603]

I have tried so many times to do these and they never work neatly. The metal ones male side are fine. Plastic coloured and metal female side never works. Any suggestions ?

[@AnitaBenko]

Maybe try hammer on method. I found this video for you: kzbin.info/www/bejne/mGKcpWtqaqyogNU Hope it will work for you 😊🤞🏼✨

[@atlantiadragonwing]

Thank you! I bought a kit from Walmart app and no instructions were sent with it!

[@AnitaBenko]

🌞😊👍🏼✨

[@michaeljameslawrence2965]

Hi Anita, I got some studs from hobby crafts that come with a plastic tool is there any difference between using pliers and the supplied tool?

[@AnitaBenko]

You can do both ways 😊👍🏼

[@AnitaBenko]

I have two tutorials how to attach metal studs. 😊👍🏼

[@AnitaBenko]

kzbin.info/www/bejne/pnrSi5iai7draNEsi=9vzJQuDf1odex37v

[@michaeljameslawrence2965]

Cheers just butchered my elastic band used all my studs forgot to use the metal inserts as following instructions and fitted one the wrong way around after trying to get them out I tore the strap it will most likely tear eventually knowing my luck haha thanks for the video though 😮

[@AnitaBenko]

@@michaeljameslawrence2965 practice on a sample fabric first. Then it will be easier. 😊👍🏼

[@Blackadder75]

Thank you, I just bought a very cheap kit for these from Aldi, and it didn't even have a flimsy piece of paper with instructions, it didn;t even say which part went with which pliers (it had 3) Oh well, you can't expect much for €6 , if i would used these more often I would buy something better , but I use these about once every 5 years or less

[@AnitaBenko]

You are welcome. Hope it was useful tutorial 🙏🏼🙂👍🏼✨🌞

[@nilofernasir23]

Can the same plier be used for different sized snaps plz

[@AnitaBenko]

Hey, yes you can use same pliers for any size snaps. Snaps and snap nozzles have to be same size tho. 😊👍🏼

[@BirdsTV4U]

Thank you. Mine came today 😊

[@AnitaBenko]

@@BirdsTV4U aww 😊👍🏼 good luck 🌞✨🌸

[@dragicazupancic6293]

Thank you for sharing 🌹

[@AnitaBenko]

🌞🙏🏼❤️✨🌸

[@mome2626]

Very helpful . Thank u❤

[@AnitaBenko]

Glad it’s helpful. Thank you so much. 🙏🏼❤️😊

[@ToysFunz-rc5nh]

Thank you sis for sharing ❤ useful for me

[@AnitaBenko]

Aww ❤️ glad to hear that. 🌞❤️🙏🏼

[@digitalmediafan]

lovely voice you have. Now I know what t do !

[@AnitaBenko]

Thank you so much. ❤️🙏🏼✨🌞

[@Mahi.khan24]

Thnk u soo muchhh... From Pakistan ❤

[@AnitaBenko]

😊👍🏼🙏🏼❤️

[@MDOFFICIAL2742]

Maine online ye product liya ..and try kiya but acche se nhiui ho raha .. please help. ..

[@AnitaBenko]

Sorry, but I don’t understand your question? 🙈

[@kalpanakasetwar5486]

Thanks you so much for explaining in details.

[@AnitaBenko]

😊❤️🙏🏼

[@mra1977]

Thank so much please keep up lovely 📹 happy days

[@AnitaBenko]

@@mra1977 ❤️❤️❤️🌞✨ thank you so much. 🙏🏼

[@Chuncy566]

Can you pry them apart and use them over again, and where would I see your reply at? On here or on my email I dont know?

[@AnitaBenko]

Unfortunately it’s tricky to remove metal poppers after they are installed. But it can be done- also It can leave spike marks on a garment. And don’t think you will be able to reuse them again as spikes on a poppers will be set/bent. Hope this is helpful. 😊

[@philiphughes3967]

Hi Anita, I'm looking to buy a number of sets which each include a Top, a Spike and 2 Buckles. They would normally come with 'hand tools' - 2 long implements which I would decline in favour of the plier type you use. The spikes which I've seen don't appear to have teeth but I only see one side in the promotional picture. Does this sound right to you? Also, does that plier deal with tops up to 15mm? Thanks so much.

[@AnitaBenko]

Thank you for your comment. 😊🙏🏼 If you are ordering a plier and snap popper set- make sure it comes with right size snap popper nozzles. 👍🏼 (White silicone rings are the nozzles that are same size as snap poppers please see listing below): www.ebay.co.uk/itm/145012661026?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=d1EMnDVNQ7u&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY Hope this is helpful. 😊✨ Ps. I never seen this type snap poppers to be 15mm.

[@philiphughes3967]

Thank goodnes I looked at one of your other videos, Anita, as I've been looking at 'Metal Snap Poppers' for which I need those Prym pliers you demonstrate. It's all more complicated than I thought!

[@AnitaBenko]

@@philiphughes3967 Prym pliers are the best. They are so universal- you can use them on so many different poppers. I love them. Definitely will fix on 15mm poppers. Here is plier playlist so it’s easy to find for you: kzbin.info/aero/PLW3-Iyo5ntGKe6PrNxMJDz1N1LScayROm 😊👍🏼✨

[@philiphughes3967]

So very helpful, Anita. Thanks very much.

[@itsjennybc]

The best! Thank you

[@AnitaBenko]

Thank you so much ❤️🙏🏼✨🌞

[@mariamazza383]

I tried it and somehow failed first time round. I managed to clip them on, it’s just that they came of my top when I unclicked them. Not sure if it’s the clippers or me

[@AnitaBenko]

Make sure prongs are attached securely. If they aren’t- they will come apart unfortunately.

[@AnitaBenko]

I have made hammer on technique for these snaps: kzbin.info/www/bejne/pnrSi5iai7draNE Maybe this technique will work better on your blouse. 😊

[@owestyo]

Thank you for the help

[@AnitaBenko]

😊👍🏼✨🌞

[@saidkho1243]

Thank you soooomuch ❤

[@AnitaBenko]

@@saidkho1243 🙃🙃🙃✨🌞

[@LLOOYYYDD]

thank you this was a big help!

[@AnitaBenko]

You are welcome 😊👍🏼🌞

[@pabskie69]

THANK YOU SO MUCH LADY GOD BLESS YOU

[@AnitaBenko]

Awww ❤️🙏🏼✨🌞 Glad it’s useful. Thank you 🥰

[@anjumshaikh2752]

I tried 😭 but it is not working 😭😭😔😔😔

[@AnitaBenko]

Awww sorry to hear that. Practice many times. If it’s still not working try hammer on method. I have created tutorial on it too: kzbin.info/www/bejne/pnrSi5iai7draNEsi=r1Sjfvu7lxpfuex0 Hope this is helpful. Good luck. 🌞✨😊👍🏼

[@Aaaaaaaaaaaaarrrrrggghhhhhh]

OK LADY, haha. You have this to PERFECTION!! I have TWO pairs of the damn thing and about a MILLION poppers!! But they keep falling out of the damn holders in the pliers, OR only one frikkin side is secured, and it’s often the jaggy bit left in the fabric!! I thought it was the pliers, first set I bought were plastic, so bought a metal pair and same thing happened with them!! So it must be ME that’s faulty, not them! He-he-he-helllllllp PLEASE!!😫😫😫😫🤣🤣

[@AnitaBenko]

Awwww no. Sorry to hear that. Maybe try hammer on method. I have made a tutorial on it too: kzbin.info/www/bejne/pnrSi5iai7draNEsi=6rfgyKdeYYWPjzBo Hope this helps. 🤞🏼🤞🏼🤞🏼 🌞

[@Aaaaaaaaaaaaarrrrrggghhhhhh]

@@AnitaBenko Oh they’re gonna get taken to with a hammer alright……!😳🤣I have tried that too, because I got filled in caps too, which had to be hammered into the ring before snapping it on. But even the simple jagged male post won’t connect with each other, nor just the simple plain jagged female bits. I’m gonna perceiver for the next TEN MINUTES, then it’s off to the bin they go, haha. But thank you so much for your reply, take care. Lisa.💚

[@AnitaBenko]

@@Aaaaaaaaaaaaarrrrrggghhhhhh practice on a sample fabric and you will get there. 😊👍🏼 it’s all about a practice. I have attached thousands of poppers- that’s why it looks easy. Good luck hun. 🙃✨

[@Aaaaaaaaaaaaarrrrrggghhhhhh]

@@AnitaBenko Ohhhh, you’re a wee star, thank you. I shall follow your instructions, and if I can’t get it right, you’re in for 2 brand new pliers, (one only got delivered today), and a mountain of poppers!! SERIOUSLY, I will send you them!!🏴󠁧󠁢󠁳󠁣󠁴󠁿💚💚🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@lifebutnotasweknowit6019]

Thank you for these, bloody Temu send them with no instructions

[@SHIKHAGUPTA-jx4oe]

Thanku so much, I did it😊

[@AnitaBenko]

🌞😊🙏🏼👍🏼✨

[@jenniferlarios4851]

THANK YOU SO MUCH!!

[@AnitaBenko]

🥰🌞👍🏼😊🙏🏼✨❤️