MetalCloak Swaybar Disconnects

MetalCloak Disconnects
We install a set of Metalcloak sway bar disconnects. We start with the factor links removed and the tires off for filming.
‪@metalcloak‬ ‪@ModernJeeper‬
It’s an easy install. Remember to use anti seize.
If you want Shirts or Stickers please email me.
[e-mail]
Help your Channel with VidIQ
vidiq.com?afmc=5jd
Music by www.ARTLIST.io
Connect with Jeepingmo:
WWW.jeepingmo.com
jeepingmo
jeepingmo
jeepingmo.tumblr.com/
KZbin: www.youtube.co...
/ jeepingmo1
Please note: We are an Amazon Affiliate program member, And We are paid by Amazon when you buy any of these products. We do use most of these products.
DJI OSMO Action Camera Bundle with Micro SD Card, Tempered Glass Screen Protectors, Carrying Case, and Must Have Accessories (55 Items)
amzn.to/2NptoPo
CYNOVA Osmo Action Dual 3.5mm Mic Adapter - Made for Osmo Action with Authorization
amzn.to/3fPQ0on
BOYA BY-MM1 Video Microphone KZbin Vlogging Facebook Livestream Recording Shotgun Mic for iPhone HuaWei Smartphone DJI Osmo Mobile 2,for ZHIYUN Smooth 4
amzn.to/2NrJJ6d
IENZA Replacement 3.5mm TRS to 3.5mm TRRS Patch Adapter Cable for iPhone Smartphone Movo BOYA BY MM1 Rode VideoMicro Mics
amzn.to/3ev4JVB
RAVPower FileHub, Travel Router AC750, Wireless SD Card Reader, Connect Portable SSD Hard Drive to iPhone iPad Tablet Smart Phone Laptop for Photo Backup, Data Transfer, Portable NAS, 6700mAh Battery
amzn.to/2YtQYAO
DJI CP.ZM.00000064.01 osmo Mobile 2 Handheld Smartphone Gimbal (Single Unit), Gray
amzn.to/2Ver3ep

[@josephsepulveda8819]

I have been debating on the kit to go with. After seeing this I know the one I’m going with. Great video. Thank you sir.

[@JeepingMo]

Thanks. Glad you liked the video. I like the disconnects

[@thebrucechannel8061]

Thanks for the video, I have a Wrangler JKU and will be putting these on this weekend.

[@JeepingMo]

You will like them. Thanks for viewing and commenting.

[@Mike-01234]

I like that thing they have moves the attachment up above the track bar box. I bought a Teraflex can't get it to fit interfering with that track bar box.

[@JeepingMo]

There are some nice disconnects out there, i like the simplicity of those.

[@robertbryant1821]

I just prefer my pair! Thank you for the video!

[@JeepingMo]

Glad you liked it, they are a good value. Thanks for the support.

[@normanpowell7217]

Great video .. actuality better than metalcloaks instructions! Do you know the torque specs.. i just installed today but can't fin torque info

[@JeepingMo]

Thanks for viewing, I don’t know the exact torque, but this page might help you thanks. www.jeep392.com/threads/jeep-jl-common-bolt-nut-you-will-encounter-size-torque-specs-chart.2565/

[@rockapex2513]

Just moved to Wentzville. Would love to go for a drive some time

[@JeepingMo]

Thanks for the comment, view and subscribing. Go out to our Facebook page and reach out to me, you never know. 👍👍

[@ThemissouriTraveler]

Southern Missouri here. I'll host if yall come

[@PSModernKitchens]

Thanks!

[@camaroboi13]

Do you think a taller lift would put that sway bar closer to horizontal where it's supposed to be? I'm on 4" diesel springs in the front with half inch spacers and I believe my end links are either 12" in the front or 13", can't remember which.

[@JeepingMo]

It should, the links can always be cut and re threaded. For the price they are a great value.

[@camaroboi13]

@@JeepingMo I agree, great price on them. There's nothing out there at this price in this quality range. I was leaning towards the Synergy links but upon watching their installation video, the installer states that relocation brackets are required for Jeeps with more than 3.5" of lift. I'm just not interested in adding extra stuff like that. I have no sway bar brackets, no control arm brackets, no track bar brackets. Make it fit like factory or move on!

[@PreaFTW]

I just went to install mine, before I got too deep, I sized mine up also. They are WAY longer than my mopar 2inch bilstein reservoir lift kit sway bar links. Im worried about installing as this is my daily driver also

[@JeepingMo]

They are definitely longer. I don’t have any issues

[@payments28]

Thanks for the Vid. Do you know how adjustable they come from factory? I'm looking for min/max lengths. tnx

[@JeepingMo]

It depends on model of Jeep. The ends have roughly a 1/2 adjustment. Thanks for the question and comment.

[@Chilly17]

How much of a lift do you have?

[@JeepingMo]

3 1/2 metal cloak. Thanks for viewing.

[@Chilly17]

@@JeepingMo awesome! Really want to get these links for my JL but I have a 2in endurosport lift from Dynatrac so I’m 2in higher than stock rubi height and I’m scared these will be too long, what do you think since you’ve had them on? And is too long really that bad?

[@JeepingMo]

@@Chilly17 i had them on when i had a 2” spacer lift on. The sway bar was at a higher angle. You could always run a thread die down them and cut to the length you would like also. Thanks for viewing.

[@Chilly17]

@@JeepingMo was there any difference with a higher angle? People are saying a high angle doesn’t affect much

[@kjm8135]

Are you still running these? How has it been with such a steep angle? What size lift do you have? I have a 2.5in lift but am at 3in of lift. Wondering if these will work for me. When I measure it seems like it will be a steep angle for me too.

[@JeepingMo]

These are actually my second set, the first set were ruined when the nut came off and ground the thread off of one of them. I trimmed those so the bar was horizontal but they were hard to get on. I run a 3 1/2 inch MetalCloak spring . They work good and for the price you really can’t beat them you can always trim them and run a die down them. Thanks for your good questions do you have any more please reach out, thanks for viewing and subscribing if you enjoy Fabrication we have a second channel as well.

[@taraaaron1242]

I used it one time and the pins fell off . Lost both of them today. They suck

[@davidmenough7501]

Sort of sad to see the Kamala ads begging money on your video.

[@JeepingMo]

@@davidmenough7501 unfortunately creators have no control over that.