Method Surprised 50-year-old Carpenter! Put Aluminum Foil To Hinge and Be Amazed

Screw holes on door and furniture hinges get loose and break over time, so in this video we show you how to fix loose and broken door and hinge holes.
hinges,furniture,concealed hinges,hinge,euro hinges,cabinet hinges,how to fix squeaky door hinges,how to fix torn furniture fixtures,easily fix cabinet door hinges,kitchen hinges,cup hinges,butt hinges,flush hinges,door hinge,hinge repair,kitchen hinge,simple hinge fix,diy hinge fix,european hinges,fix door hinge,soft close hinges,how to fix door hinge holes,how to hinge fix,how to fix squeaky hinges,how to fix loose hinge,repair loose hinges

[@scrappystocks]

Drill out hole to 6mm or same size as a wood dowel. Glue in a wood dowel with wood glue. Cut flush. Use the other half of the dowel for the second hole. Cut flush. Screw into dowel to fix hinge. Stronger fix than original into chipboard. Job done. Simples. Wife happy because I've not wasted her baking foil.

[@max8286]

Happy wife, happy life ;-)

[@ilnar9]

Классная идея

[@jeffmartin2973]

Dowels tend to crumble when done this way. I’ve tried it several times.

[@greighooper5295]

Spot on

[@ferrumignis]

This is the repair any reasonably competent person would do, not the half assed "life hack" crap in this video.

[@TheRealGrandadNo1]

You have drilled the holes out, now just glue a dowel in there. It will last with no problem. Trust me on this one, I have been doing carpentry for over sixty years.

[@BAJ1981drones]

Precisely what I was thinking. Also a cabinet maker to trade

[@anisdesai4692]

Yep that's how I repaired my hinges on kitchen doors. My dad taught me ages ago. He was a builder.

[@brianmccarthy1322]

Surprised he didn't drill all the way through then install 2 stove.bolts with wing nuts on the outside.

[@Turrican60]

I've only just posted the same thing myself, then I spotted your comment. It's easier to use a dowel, and it's super-strong.

[@notpoliticallycorrect1303]

That foil will last all of about 2 minutes,you could see when he inserted the screws that they bottomed and we're still turning, he would have been better served just putting the screws back in with just the glue.As an automotive engineer I can tell you that that open tapered thread will offer next to no clamping force in that foil,the screw being held in entirely by a bit of glue and some friction, its ability to retain that little clamping force will be rapidly overcome by the movement and weight of the door it's self and the transfer from the snapping action on the hinge as it shuts. My method is to router out a rectangle around the recess leaving around 3mm at the back edge to retain the outer finish and then glue in some hardwood blocks and recess them to accept the hinge. I've done a few that way,none have failed👍

[@RFC3514]

Seems like an pretty convoluted way to do the same that you could achieve with a dowel and wood glue (which is how presumably even a _40_ year old carpenter normally fixes this issue).

[@ricklarsen7477]

Title says it was a surprise it didn't say why.

[@DMNL2]

did they had super glue 40 years ago????

[@RFC3514]

@@DMNL2 - "They" (the original inventors) had it more than 80 years ago. It didn't start being mass-produced until 1958, though (65 years ago), by Eastman (a.k.a. Kodak). Originally it was used just by the industry, but Loctite started selling it to the general public in the late 60s (around 55 years ago). All those numbers are bigger than 40. Anyway, nothing in my post refers to using super glue "40 years ago".

[@naratipmath]

I found Method 1 in Video is a lot more DIY than using a dowel. Every household will have a roll of kitchen foil within reach most of the time, but not a dowel and a saw.

[@RFC3514]

@@naratipmath - Does every house have an easily-amazed 50-year-old carpenter, though?

[@occasx]

I love how he learned his lesson, after over tightening the second screw in the tin foil, we went really slow when screwing into the hot glue.

[@RFC3514]

And the silliest part is that any "50 year old carpenter" will have dowels and wood glue, that make this fix easier and much more solid.

[@alsheremeta]

Yeah, never a good idea to use a drill for little screws like that, that's probably how the holes got wrecked in the first place.

[@clivegilmore9598]

I’m a carpenter. If I went to someone’s house and did that……. Let’s just say I’d be surprised if I got paid lol

[@Martin-pb7ts]

That is true. But for someone like me who is not a carpenter tries to fix their own things at home this is a great tip. If it holds and it is strong and it is not visually unappealing this is really useful for me.

[@michaelpayne8102]

Agreed, KZbin is full of rubbish and idiots watching liking crap.

[@dan4091]

This is an awesome repair for rental properties!!!

[@Meop79]

You would if you didn't try and rip them off. This is a quick and easy fix, most people are simply going to appreciate that and your knowledge.

[@james-qx9xg]

You would go to the customers home see this and say nope can’t be fixed new kitchen needed🤣🤣

[@originalfred66]

I usually fill any stripped hole with toothpicks coated with a little bit of wood glue. Some people have suggested match sticks, but they tend to be kind of thick. Toothpicks are thin and tapered, so you can really jam them in tight and break them off at the surface.

[@ErrantHippo]

I have used zip tie ends because I had them handy and it worked perfect as well

[@uniQChick]

I use toothpicks with wood glue as well.

[@anonydun82fgoog35]

I did this once when my father in law was watching me repair something of my wife's. He laughed at me. But then when he saw how strong the repair was afterwards he stopped laughing. Friction is a real thing.

[@user-fb7tw4mj2v]

😅😊😅

[@moosewhizzerdave2066]

i have a table my great grandfather made. It has a pedestal center, and the tabletop can be turned upright by virtue of a hinge on the pedestal. Tabletop is quite heavy, and after 90 years, between wood shrinking and the weight of the table top, a couple of the screws gave way. My brother-in-law tipped me off to the toothpick method, and it worked incredibly well. I was nervous as anything to try it - GGfather's table has thousands of small inlays, a real piece of art that I was terrified I'd ruin.

[@joaquinspandex7870]

One of the cool things about woodworking is there's about 400 ways to do everything, none of them are the best.

[@bentonjackson8698]

Be careful when using a dental pick and superglue- I was rubbing down a reinforcement on a model airplane, and the pick threw a drop of superglue right in the center of my eye. It cured before I could blink, so it didn't glue my eyelid down, but boy did that sting for a few days! Always wear safety glasses.

[@ParaBellum2024]

One thing I drilled into my children, and my pupils when I taught shop, was "no superglue without goggles", and your experience illustrates why this is so important.

[@ratusbagus]

Hi Benton, Reminds me of my neighbour coming in for a cup of tea to calm down after bringing his wife home from A&E. They were out and he bought some superglue to fix something in the car and when he was done, asked her to look after the bottle until they got home she put it in her handbag. They stopped for a bite to eat at a restaurant, he came back from a loo break to waiters surrounding her in panic. She was screaming. During his break, she'd put lipstick on and her eye drops in.

[@ericaulbach]

Be careful taking a squirt after handling superglue.

[@sugu8403]

I’m sorry but that’s hilarious hahaha always work safe.

[@necurrence1776]

I'm sorry to hear that Benton. I tend to avoid using superglue as much as possible. There are professional adhesives at your local hardware store meant for specific materials you're gluing. Superglue is just nasty. Take care

[@resecurelatch]

If anyone is having issues with their door latch or dead bolt screws being stripped out and the latch is loose, I've invented a new door hardware that sits inside with the latch, invisible after install. ReSecure Latch. Thanks for videos like yours that are teaching people clever ways to repair their worn out items in their home.

[@traxonja]

Now all I need is a 50-year-old carpenter.

[@stephenhookings1985]

Apparently a 49 year old carpenter was later for the job. The 50 year old got there 1st. The 49 Yr old inspected the repair ..."foiled again!", he exclaimed...

[@mikel4510]

@@stephenhookings1985 😂😂

[@johnki325]

60 year old even better.

[@davidmil15]

I’ve got one year to become a carpenter 😅

[@johnki325]

@@davidmil15 That's great and on your final exam you already know the answer for the question : How to repair stripped screw holes. The only right answer is aluminum foil. I'm sure you'll ace the exam 👍

[@roblucas6097]

I showed this to a 49 year old carpenter. He was not surprised.

[@zsoltbr]

An easy life hack. All you need is a laser guided drill tower, surely available in every household.

[@Turrican60]

A decent solution, but I wouldn't waste my aluminium foil, let alone expensive superglue, on this type of repair. In the past, I've simply drilled out the stripped thread, added a drop or two of Evo-Stik wood glue, then tapped in a suitably-sized dowel. A piece of cake.

[@krushingbro6620]

Nice and if you dont have dowels, do what i did and use some match sticks similar outcome, and its probably stronger than it was before.

[@saxon.ad410]

@@krushingbro6620saw dust and superglue works too

[@AlexYaroff]

You can use aluminium foil from a chocolate bar 😁

[@zedcarr6128]

I was thinking the same thing.

[@keithrobertson5110]

Me as well, not impressed with this 30 years experience crap.

[@DarrylLeaning]

No wonder the screws come out if you over drill them in with a power tool like that :D

[@rustiikkiruksi8763]

Added extra bonus: destroy the screw head so the 60-year old blacksmith can show some forging magic.

[@MrTweety5]

I would drill bigger hole and stick wooden dowel

[@axelfoley1406]

Saw dust and wood glue are a great combo for this.

[@ROGER2095]

You can avoid these problems by (A) NOT using power tool to tighten these screws in the first place and (B) not making cabinet doors out of particle board.

[@jimness5902]

simple solution old time hinges on old time wood ply or laminate but not particle board that when wet falls apart

[@ronignino]

yes you can use it... most power tools have clutch with 20 levels to choose to prevent unnecessary strength. you just need to use it... that fix right there, was actually not perfect, you can clearly see the screw didn't tight as much as it should. i prefer using a wooden plug with glue

[@whatworkedforme]

did he make the cabinet? I doubt it.. I work on jobs already assembled so no choice there. I would not go to this length though on such a repair. a good filler and a wooden peg is as good.

[@jojogo22]

A lot of people don't like the particle board but if you use anything else it will double (or more )the price of the units.

[@whatworkedforme]

exactly!@@jojogo22 most of my own, already fitted, units have lasted and lasted. People often abuse stuff especially if they don't own or pay for stuff. If you know a cabinet is going to be abused then no you better use something else and charge for it.

[@That_Stealth_Guy]

1st problem is using the drill driver to install wood screws into MDF or particle board. Way too difficult to control the amount of torque applied to the screw which will cause the screw to strip out in those types of materials. Just because mankind invented portable, easy to use electrically powered tools, doesn't mean that they are the "right tool for the job". Especially in soft materials like MDF particle board and plastics.

[@bagaljivkoO007]

The only question I have is how long does this last till it breaks again? It's still better then getting a new doors tho.

[@roberthart9886]

Excellent video. I have this problem and have been waiting for a tutorial on how to repair it

[@PoutingTrevor]

50-year old carpenter's head literally explodes with amazement as the same 50-year old carpenter just fills a hole with something and drills into it! WOW!

[@starz0120]

Thank you for sharing how to fix the cabinet door hinges. This is very helpful!

[@tonywright8294]

You can also use long nails ,just knock them in then bend them over on the front of the door ! Very strong.

[@Miss-Aplus-IGCSE]

I was watching this video when all of a sudden my neighbour came in, so we watched it together, and it inspired us and changed our lives, so I brang the money I saved before for my flight and bought a projecter then placed it in the street in my village so that all the village could watch it to change their lives!!

[@LawrenceHenson]

🤣🤣🤣

[@mook3312]

You what the money?

[@frankcovert6196]

So inspiring, if only others could learn from you the world would be a better place. Thank you for changing lives.

[@baconair]

Old copied comment

[@Miss-Aplus-IGCSE]

@@frankcovert6196 thank you too for your amazing comment that shed my tears🙏 We need more positive amazing people in life like you!

[@asschultze4182]

Löcher mit Holz- Streichhölzern füllen, etwas Klebstoff dazu und dann halten die Schrauben.

[@Longtack55]

For all you "use a dowel" guys, this is for 15mm thick composite timber which is very weak. Use a steel hinge repair plate.

[@jamiecooper4652]

You can use a filter from a cigarette to push and fill the hole then drip super glue on. Can add bicarb/baking soda in sprinkles between glue drips to make it set extra hard and stable

[@wmgthilgen]

Or as I was taught more than 60 year's ago, one can simply put one or two tooth picks in and accomplish the same thing, but faster.

[@thomasshepard6030]

Or a couple of matches

[@jackbloznowski5429]

Yep, many ways to fill a gap. I can't say anything about the 50 year old carpenter. Most carpenters know all sorts of tricks to do this.

[@AHoundOnAHonda]

If only you'd been taught how to spell "years" more than sixty years ago! 😉

[@athgt6630]

After drilling the holes, you can just fill them with epoxy resin and baking soda, then wait. Then drill them and put the screws. Will last longer than the door itself

[@davepangolin4996]

Yep … every time

[@bonajab]

What does the baking soda do?

[@athgt6630]

@@bonajab strengthens the epoxy even more.

[@Cerbera82]

@ATHGT I've been using baking soda on superglue. For a near instant cure and more strength. I didn't know it worked on epoxy too. Nice.

[@Martin-pb7ts]

Great tip.

[@MrCoreyCoreyCorey]

I'm happy to see the square trick for aligning the hardware!

[@johnlong8082]

Just get a small piece of 4”x 2” wood, glue it on the outside of the door near the hinge area. Then just screw through the door with 2” screws. Then you can make a feature of the 4”x 2”. I learnt this off the TV diy programmes. Simple.

[@gw-kz9yl]

Love it.

[@kalinkamylove]

I to wszystko pokazuje nam człowiek o którym gdyby nie internet i yotube nie wiedzielibyśmy ze gdzieś tam egzystuje odkrywa przed nami skrywane tajemnice wszystkich zawodów świata,…glazurników,stolarzy,hydraulików,szewców,murarzy 😂😂😂😂😂👍

[@kalinkamylove]

@Mini Content Man i know i just litle joking but i like this chanel 🤣👍

[@bombheadgames9565]

I fixed our fridge door handle with Araldite (epoxy) and tinfoil composite.. Its lasted about five years so far.. Covering breaks with glued tinfoil makes the fix really strong.

[@user-dq3pw7im5x]

Gr8 ideas all the same. Hot glue, dowels, aluminium, builders bog, fibreglass fillers, plenty of fabulous options. ✔️ 👍

[@t5788]

わざわざネジ穴を拡げなくてもそのままマッチの軸を接着剤付けて穴をふさいでからネジを締める方が簡単で早い。

[@papillonsplendide113]

Merci beaucoup pour cette astuce 👍 Justement, j'avais une porte de placard à réparer depuis longtemps déjà....trop longtemps.... alors merci encore 👍📽️🎬💪

[@1982rebell]

Herrgott, warum zur Hölle glauben Sie jeden Müll den Ihnen irgendein KZbin-Trottel hier erzählt? das ist unnötiges Material! nehmen Sie einfach feine Sägespäne oder Schleifstaub und Sekundenkleber! ...anstatt sinnlos noch anderes Material zu verschwenden! nutzen Sie doch Ihr Gehirn richtig und denken Sie nach!😉✌🏻 warum wird die Mehrheit der Menschheit immer dümmer?😔

[@michaelbirchall2247]

On the first fix you 100% over tightened and stripped the threads on that second screw. Well done.

[@Steve-tr1qh]

There’s a world of difference between surprised and impressed 😂😂😂😂

[@Steve-tr1qh]

Errrrrr???????? It says surprised in the title - “method surprised 50 year old carpenter!………”

[@Benzknees]

I used a threaded insert in my kitchen door, where previous use of dowels & glue had failed. That's the best & only permanent solution.

[@manofbeard]

I use rawl plugs. Drill out a 10mm hole, glue in the plug then cut them flush! Does the same job. But neat little tip all the same 👍

[@TABISURU2019]

I don't expect the hot melt to be permanently fixed because it changes over time, but I think aluminum foil is a good idea.

[@TomatoTomato911]

hotglue are too soft. eventually the screw would just force its way out of the glue after few time opening the cabinet.

[@Martin-pb7ts]

I agree about the hot glue. It did seem unlikely to me that it would be useful over time. Especially if it shrinks it would come loose eventually.

[@xzenor]

Why would aluminum foil be a good idea? It makes absolutely no sense to me to use aluminum foil

[@lakajaba]

Blow off all the critics, great ideas and thanks for the post.

[@toronnexloyt7550]

Vollkornmehl mit Leim gemischt, hält auch wunderbar.

[@jamiehardcastle4999]

I'm a 50 year old Carpenter, and I would be ashamed if I did this 😆😅🤣

[@tomloya7366]

@@brothershooryn_219 I'm not a carpenter, nor 50 years old... and I would be ashamed if I did this as well.

[@hugsnkissesnursery67]

i’m a 58 ex cabinetmaker and i agree with you total hacks

[@michaeltoner1993]

I am and 80 year old carpenter and I would probably recommend replacing the entire kitchen

[@robdom91]

It's no wonder these methods surprised a 50 year old carpenter. I imagine these gadgets have come a long way since when they first started their professions.

[@josh-thomas]

Did you see the 50 year old carpenter? I missed them in the video?!?!?

[@robdom91]

​@@josh-thomas It was implied in the title. I considered it part of the concept of the video.

[@jca111]

Its easier to use baking powder. Works just as well and fills the hole quicker.

[@cleidivansalomao9328]

As empresas que vendem esses moveis de baixa qualidade não gostam de pessoas como otimas ideias como estas.Parabens!

[@yasinkaratas8679]

👏👏👏👍👍👍

[@albertjansen5996]

The second method is the most funniest. It's hot clue so if the warm summer is coming.... First you can fill it with wood filler hardener that's much much stronger and more reliable. But why not use a bit larger screw in the first place 🤣

[@Martin-pb7ts]

Larger screw won't fit through the hinge hole.

[@dockterperoxide1768]

For a video with no words, this really says a lot. Also, I'm guessing he's an engineer 😂😂😂

[@Sola_Scriptura_1.618]

I have used toothpicks to fill the gap. It works well and holds strong!

[@jinglesbluecat]

You ballsed up the second screw with your drill driver - use a hand held screwdriver for the last couple of turns - gives you much better control and the perfect tightness

[@sweetdrahthaar7951]

Super glue and baking soda. With threads of a screw bite into that even better?

[@AmazingSmart-ngth]

WOW...great ideas 💡 ✨!!! I will definitely use some of these ideas. THANKS 😊

[@danilkichai2756]

You can use epoxy glue mixed with sawdust.

[@ld7179]

А почему не указали какой клей это самое важное и главное?

[@Robs347YSI]

I like it, but please share what glue did you use. Thanks

[@garethwillis7688]

Looks like CA glue (super glue) and then an activator that was sprayed at the end

[@egonranz5725]

Und wieso klebt man nicht einfach zwei Holzdübel ein? 🤔

[@ronnykoderisch1238]

EIN, MEISTER IM INPROVISIEREN. 👍👍👍LIEBE GRÜßE AUS 🇩🇪

[@sirifail4499]

Baking soda and super glue works great also. Put the baking soda in first, then some drops of glue. Hardens like epoxy.

[@rshoe1023]

I've used the hot glue fix, but the tin foil one was new to me! There are so many different types of hacks for these fixes! Over sized holes are no problem.

[@jacobshaftoe8326]

Are we still doing phrasing?

[@KungKokkos]

You can also fill in with most powders, like residue form a cigarette or salt, then glue

[@burtonfootballer5408]

Could just use a slightly larger screw which would not involve the risk of drilling through the front of the door? Or a piece of dowelling, or a piece of plastic pipe, or or or lots of options easier than this

[@TomatoTomato911]

the hinge are designed to only take in certain size of screw, using a bigger screw would usually mean the head will not sit flush onto the hinge holes.

[@Martin-pb7ts]

True but sometimes you have to use what you have available and I am not a carpenter so I don't have, for example, a bunch or super useful dowels lying around, or piece of plastic pipe and I don't know all these easier options you talk about. So this is helpful to me.

[@lastotallyawesomebleach204]

Toothpicks and wood glue work just fine

[@user-gf5sz8by6g]

アルミホイルでアンカー作ったんですねw凄い！為になりましたありがとうございました。

[@zygmuntthecacaokakistocrat6589]

Method 3) make furniture out of something other than MDF, which is basically slightly longer-lasting cardboard.

[@LawrenceHenson]

He didn't use a "set square" to align the hinge in the second version!

[@rayray8687]

He’s getting better, lol.

[@ynotbloom]

Obviously, the hot glue must have a self leveling property!

[@johnchoice1371]

You could also try car body filler. Just mix a bit with its hardener and fill the holes. It should be strong enough to drill a new hole into once fully hardened.

[@michelemaiurano9855]

Oppure stucco a spruzzo più catalizzatore o stucco vetro resina

[@TTAJ]

Like280,. 영상 잘 봤습니다!! 또 오겠습니다!!

[@ramilramil6980]

pierwszy raz widze by zawias od strony dzwiczek wyrobil sie na srubach zawsze od korpusu wypierdalają sruby

[@CZesluaw]

Można pewnie i krowim łajnem tylko po co? Po co wymyślać cuda na kiju skoro w i tak rozwiercony otwór wystarczy na klej wbić kołek drewniany i tak się zwykle robi.

[@ryszardkazimierczuk8985]

Dokładnie.

[@Custerd1]

Baking soda might work just as well?

[@HWR71]

😂😂

[@bk1963]

This is a brilliant idea. Thank you for sharing.

[@andrewwatson5360]

There is no need to make a very simple repair so complicated. All that is needed is a bottle of PVA glue, a sharp chisel, a small hammer, damp rag and a piece of soft wood. Preferably radiata pine. Split a piece lengthways off the pine probably 75 mm (3 inches ) long using the hamme and then split/shap smaller pieces with the chisel by hand so they have a long point and are approx max thickness of a pencil. Place the door face down on a flat surface with a towel or similar on top to protect the finish. Fill the screw holes with glue, tap the splintered pine into the holes, break them off and carefully chisel any wood left above the surface of the door. Wipe any excess glue off the door and chisel with the damp rag. Screw the hinges on ensuring they are correctly aligned, without drilling any holes preferably using a small impact driver ( do not over tighten) . Rehang door. Job done permanently.

[@mediumsizedm]

Most people would have just glued in a dowel of some toothpick chunks, or filled it with hot glue, or any other manner of simple abd cheaper options. By the way... Picks plus superglue = safety glasses

[@nickgilbert1264]

Or even better, use cotton wool + superglue. Far easier than aluminium foil as it sets almost instantly and is stronger than the foil solution.

[@Martin-pb7ts]

That is a good idea. I think for someone like me that is not a carpenter and would try and fix my own stuff this would work well.

[@nichderjeniche]

That's exactly how aquarium guys glue their rocks together...

[@Ronbc000]

My Friend, well done 👍

[@SlavskyBF]

Просто засуньте пару тройку спичек, можно с клеем если есть. И все.

[@user-iq8hj5oj1g]

При том, это дешевле и быстрее. ))

[@rich8037]

Is stripping the screw thread an essential part of the procedure? 'Cos it looks horribly like that is happening from the way the leccy screwdriver bit keeps going round after the screw is driven home...

[@tomkush2001]

LMFAO!!! You just striped the screw out on the 2nd installed screw. haha

[@dirckdevriez6661]

Bij een nieuwe keuken al dunne lijm in gaatje doen, en dat trekt in spaanplaat, gaat het nooit meer stuk en na 15 minuten schroefje erin. Deze voorgeboorde altijd lijmen... word hout sterker van!

[@bazyl4624]

What type of glue did you use in the first method?

[@nickgilbert1264]

Superglue (cyanoacrylate) is usually what's used with these methods.

[@nixxonnor]

I have heard about cotton + CA glue or baking powder + CA glue as a sturdy filler. I did not know that aluminum foil + CA also could do the trick

[@1982rebell]

🤦🏻‍♂️ das ist KZbin Müll! nimm Schleifstaub oder feine Sägespäne mit Sekundenkleber! das ist tausend mal besser! und verbrauchst nicht sinnlos irgendwelche anderen Materialien! zu 90% sind dieses ganzen angeblichen Tricks und Tipps totaler Schwachsinn! traurig, aber leider wahr!

[@nixxonnor]

@@1982rebell What the guy above wrote in German was: "this is youtube garbage! use sanding dust or fine sawdust with superglue! that's a thousand times better! and don't needlessly consume any other materials! 90% of all these supposed tricks and tips are total nonsense! sad but unfortunately true!"

[@reyray7184]

Wood glue and sawdust have been solving this problem for a little over two centuries.

[@frankfurtrob866]

Great idea on how to repair particle board!!!

[@Tailspin80]

I use a two part filler for jobs like this. Wood filler or car filler both work. Same for sorting out messy oversized holes in masonry.

[@leegraves101]

For a heavy duty fix fill it with JB Weld .

[@michaeltoner1993]

Glue and toothpicks are a lot stronger than bog

[@elhoward7440]

Just be careful you don't drill all the way through the door, like I did by accident once when installing Tot Locks on my brand new cabinet. Use a drill stop.

[@user-gk7cz5zs3u]

Bravo Mr Dépanneur 👍👍👍

[@HMOOBVWJ93]

I can’t find a video on how to hinge a rock together. Can you possibly help do one? That’s simple and works? Greatly appreciated. This video helps!

[@chuckmcinally7316]

You can buy hinge repair plates, one type does the door, the other type does the unit carcass, only a couple of pounds each, permanent repair, no messing about with crap shoddy repairs ideas, “real” joiners/carpenter’s use them 👍

[@michaelpayne8102]

Why not just do it right from the start? Use the hinge with the pre installed plastic dowel on the screw, intended for particle board/MDF panels. Or go buy the insert and fix it the way it was designed to used.

[@Martin-pb7ts]

Those options aren't always available to everyone.

[@michaelpayne8102]

@@Martin-pb7ts BS, take some ownership and stop making excuses. If you can core a 35mm hole in a door you can also do some 10mm holes. Either that or get out of the f’ing business and stop turning out shoddy products.

[@jos4653]

아하....기억해뒀다가 나중에 써먹어야겠네요~~~

[@CaptCutler]

Neat! But instead of drilling out the holes you should either make a small fire inside them, or use a small beaver to gnaw them out.

[@user-yp7vc1mx3g]

2 spinette per montare i mobili ed è tutto fatto. Genio!

[@vladvainer4881]

Отличные способы! Благодарю! Большинство знают эти два способа,но всё-же! Мелкая опилка с клеем ПВА,или Обычный мебельный шкант,в массиве шуруп лучше "себя чувствует"!

[@VeryNiceSmileDental]

It's like placing a silver filling but using aluminum foil instead of dental amalgam.

[@MrAlanKendall]

I put a little elastomeric sealer in the big hole. Once it cures, it makes glues the hinge in place. That way, I don’t have to reinforce the small screws.

[@warrensnow6695]

Blum makes a hand held tool that drills those holes perfectly and inserts can be installed.

[@michaelghent2887]

Epoxy and Robin Hood flour worked for me for the same repair. Aluminum foil was new to me.

[@stevebrown8163]

Thank you

[@j340_official]

2:42 looks like the first date went really well … 😂😂😂

[@mikesexton2046]

Wooden golf tees and wood glue. I always keep a pack of them just for this purpose.

[@markuschelios6891]

I save all my takeout chopsticks. Bamboo skewers are also excellent.