Razor Sharp! Easy Way To Sharpen A Drill Bit In 3 Minutes With This Method

[@AmazingSmart-ngth]

"Incredible technique! This video has completely changed my approach to sharpening drill bits. The step-by-step demonstration was clear and easy to follow. Now I can ensure all my drill bits are razor-sharp in just a few minutes. Thank you for sharing this valuable knowledge!"

[@InventorSC]

Glad it helped! Thanks for watching and leaving your comments! Have a nice day!

[@nothankyou5524]

Yes, it is a great technique, is it not? It's also portable. Smart Techs will have a grinder on hand for many reasons, even if their craft never requires a grinder. Never say never. Never say always. I guess I just said "never", huh?

[@AbelinoGonzález-n5u]

Desde Cuba: Genial , compadre. Quién lo hubiera sabido antes. Hace poco pase' tremendo trabajo para hacer 2 barrenos en un angular.❤

[@InventorSC]

Thanks for watching! Have a nice day!

[@jameswheeler6954]

If the-method works its works . Many ways to do the same thing 👍 There are faster ways yes but it’s for experienced people so this is another method Thank you 😊

[@InventorSC]

Hello! Glad you liked it! I appreciate that! Thanks for visiting the channel and sharing your feedbacks! Wish you all the best!

[@markmcculloch2570]

This is great for the no so handy guys. Nothing wrong with this method. I spent a week sharpening drills at apprentice school on a bench grinder. So I can do by eye. Cheers

[@InventorSC]

Hello! Glad to hear that! Thanks for watching and sharing your feedbacks! Have a nice day!

[@TipsDIY8989]

"Wow, what an incredibly useful technique! I've always struggled with dull drill bits, but thanks to this video, I now have a simple method to sharpen them effectively. The clear instructions and visuals made it easy to follow along. Thanks for sharing!"

[@InventorSC]

Hello! Glad it helped! Thanks for visiting the channel and sharing your feedbacks! Wish you all the best!

[@kevindoyle5768]

Thanks...nice way to ensure the angle you sharpen is consistent. I have a lot of bits that need sharpeneing so ill try this method

[@InventorSC]

Hello! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!

[@CreativePassion88]

you work well

[@InventorSC]

Thanks

[@LukaTricks68]

By chance, I came across this video, which provides a useful guide on sharpening drill bits. I will learn from it and apply the knowledge to my home hand drill. Thank you.

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@rolandzoske448]

Если я правильно понимаю, этот метод создает только конус, но не задний угол, так что при сверлении вся режущая поверхность всегда прижимается к заготовке и на твердых заготовках сверло перегорает. К сожалению, это не очень хорошая идея... If I understand correctly, this method only creates a cone, but no clearance angle, so that when drilling the entire cutting surface always presses against the workpiece and the drill will burn out on hard workpieces. Unfortunately not a good idea... Wenn ich das richtig sehe, entsteht bei dieser Methode nur ein Kegel, aber kein Freiwinkel, so dass beim Bohren immer die komplette Schneidenfläche gegen das Werkstück drückt und der Bohrer bei harten Werstücken ausglühen wird. So leider keine gute Idee...

[@InventorSC]

Thanks for watching! Have a nice day!

[@rolandzoske448]

@@InventorSC Unfortunately, I forgot to say that it's a good first step. I apologize.

[@hibiskus2872]

Selten etwas blöderes gesehen - Stampfer!

[@Север-п5р]

Согласен!

[@АндрейАндрей-п1к6ц]

Я обычно это делаю за минуту на глаз. Результат ничуть не хуже.

[@InventorSC]

Thanks for watching! Have a nice day!

[@РафаэльХаметгатин]

Не каждый на это способен

[@zov-fv9vj]

С похмелья тоже когда руки трясутся😂

[@dukeeod1650]

WOW! great video. Where can I find one of those doublesided hacksaw blades? They seem like a great tool. thanks for sharing

[@InventorSC]

Hello! You can buy it at hardware stores! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@juarezpereiraforteforte2741]

Se fosse só uma furadeira não valeria a pena. Eu tenho várias pra amolar, vou fazer o mesmo tenho todo o material necessário pra isso. Valeu a ideia 👏🏻👏🏻

[@InventorSC]

Thanks for watching! Have a nice day!

[@MosesKock]

Hi.... I Am From South Africa.... Gauteng

[@InventorSC]

Hello! Nice to meet you! Thanks for watching and leaving your comments! Have nice day!

[@krisname-d7t]

podpowiedziałeś mi fajny sposób - Dziękuję 😀

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Have a great day!

[@valeriymakarov539]

Россия Республика Татарстан город Казань. Очень был удевлён данному методу, и очень даже простому, и эффективному. В будущем планирую применить его. Добра Вам и Благополучия.

[@InventorSC]

Hello! Glad you liked it! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@CreativeHop]

Your drill bit has been sharpened to perfection

[@InventorSC]

Hello! Glad you liked it! Thanks for watching and leaving your comments! Have a nice day!

[@АлександрЗолотавин-ж6ш]

Я чуть не уснул и забыл с чего видео начиналось😂😂😂😂😂

[@InventorSC]

Thanks for watching!

[@ВладимирРусяев-м5з]

Ночью спать надо.

[@moahmedmohamed5786]

J admire vos efforts et votre integence bon courage

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@АлександрКравчук-к6й]

Отлично, молодец. Всё просто!!!

[@InventorSC]

Hello! Glad you liked it! Thanks for watching and sharing your feedbacks! Have a nice day!

[@SureshFrancis-l8l]

I am from Ahmednagar india. The presentation is very informative and explained very well. Thanks.

[@InventorSC]

Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@СергейЛивадонов]

Шкуркой не заточить, пятку не заправил, угол по металлу должен быть тупее. А Сербам из России привет! ❤Нижний Новгород. Удачи и Мира Всём!!! 😊

[@InventorSC]

Hello! Thanks for watching and sharing your great experience! Wish you all the best!

[@РусланШакин-ц7о]

Пятку не убрал, согласен, заточить можно даже зачистным диском, для стали 120°,для нержавейки 134°.всё правильно.

[@ДанилаМастерЛомастер]

На дешманской белгородской наждачке на гриндере сверла точу. Точатся махом. Что я делаю не так? Почему на "шкурке" вы не можете заточить сверло?

Да, сваки мајстор који зна да наоштри бургију ће вам рећи да овако наоштрена бургија не може да буши.

[@dmitrii639]

​@@РусланШакин-ц7отак он вроде эту приспособу размечал , собирал, приклеил по отношению к диску все на "глазок", хз там уже какой угол получился

[@gregr1672]

To all the experts who say they free hand it blah blah ! Great for you ,truly . Most people can't free hand it effectively.Some can ,really well! I do much better with some kind of jig ,guide! I have an old clamp on steel guide for sharpening ,but making one like this could be used in driveway easily ! I like it ! Thanks

[@InventorSC]

Hello! Thanks for visiting the channel and sharing your feedbacks! Wish you all the best!

[@zacharypaulin161]

And even then the guys that think they can sharpen a drill free hand still can't. The drill wanders and drills oversize.

[@ВикторЛуговской-о2з]

Рукожепье высшее гильдии !!!!! )))))))))

[@InventorSC]

Thanks for watching!

[@בניחסין-פ8ס]

ישראל. אהבתי את אופן העבודה שלך.❤

[@olegig5166]

Wow! Works so much better clockwise.

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@ИгорьСергеев-щ9ж]

❤Дай Господь тебе крепкого здоровья🎉

[@InventorSC]

Hello! Thanks for visiting the channel and leaving your comments! Wish you all the best!

[@carlossaurez8153]

Excelente video felicitaciones desde Costa Rica

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@игорьпопов-в3с]

Более сложного способа, наверное не существует)

[@InventorSC]

Thanks for watching!

[@khelifa-qk9gz]

Tunisie

[@khelifa-qk9gz]

Tunisie

[@staspustovit]

И более тупого способа. На точиле я затачиваю за минуту без всяких приспоблений. Эти чайники придумывают всякую лабуду вместо того, чтобы один раз прошарить тему, как сверлит сверло. А когда понимаешь, то можно и алмазным надфилем заточить, если ничего другого под рукой нет. А то что на видео это вранье полное, т.к. подложка на "липучке" мягкая, там всё будет с закруглениями. 🤣 А в конце автор показал то же сверло, но до того как он его затупил. 🤣

@@staspustovit Burgija naoštrena na ovaj način ne bi mogla ni drvo da probuši. Svaka burgija bi na ovaj način bila totalno zatupljena.

[@nonsibicunctis]

Excellent presentation of steps without clutter talk and with good images. My only suggestion for improvement would be to add lighting that better shows the bit when being held against the rotating grit paper for sharpening.

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Have a nice day!

[@ИгорьПупкин-ж5ы]

10 минут видео, под названием-"как заточить сверло, за три минуты".😂

[@InventorSC]

Thanks for watching! Have a nice day!

[@staspustovit]

Верней, как испортить заточку. 🤣

[@staspustovit]

@@InventorSC Author, first study the topic of how a drill works and how it drills before you sharpen it and show a video about this nonsense. And it’s impossible to sharpen a drill with Velcro sandpaper because the backing is soft.

[@shekarv8738]

I m going to try. From India

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@МАРАТЗАРИФЬЯНОВ-р6д]

Мне понравилось. Спасибо. Сделаю такое же приспособление.

[@InventorSC]

Thanks for watching and leaving your comments! Wish you all the best!

[@DYIIdeas]

Information on how to preserve tools is really necessary.

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@hop6102]

Бай бог тебе здоровья добрый человек , пошел в магазин за сверлом 😂 видео досмотрю когда буду на пенсии и будет много свободного времени 😅

[@InventorSC]

Thanks for watching! Have a good day!

[@sunriseboy4837]

Great demo. Thank you!

[@InventorSC]

Glad you like it! Thanks for visiting the channel and sharing your feedbacks! Have a good day!

[@barn_sochi]

Всю заточку сверла элементарно сделать на плоской стороне диска болгаркой. Занимает эта операция несколько секунд. Без всякой остальной ненужной ерунды.

[@InventorSC]

Thanks for watching! Have a nice day!

[@ВалерийТимковский]

Без всякой ерунды можеш не угадать угол. И ничего у тебя не получится.

[@Абу-БакарАлимурзаев]

От силы 5 6 секунд можно просто болгаркой

[@ВикторКоваленко-ы2п]

Покажи как?

[@ВикторКоваленко-ы2п]

Приспособа супер молодец.

[@higiniocampos6421]

Soy de Veracruz, Ver, Mexico y estoy viviendo en Austin Tx, excelente video muy iliustrativo y practico gracias muchas gracias

[@InventorSC]

Hello! Nice to meet you! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@1tiranos]

У меня только один вопрос . Зачем надо было снимать защитный кожух с шлифмашинки ?! 😂

[@InventorSC]

Thanks for watching! Have a nice day!

[@เนียนวิทย์สหมุนื-ฐ9ภ]

😅😅

[@demonisimusdemonisimus1337]

​@@InventorSCТебе задали конкретный вопрос, дай конкретный ответ, мастер ломастер...

[@mariaelsasolanot1392]

Excelente! Muchas Gracias desde Argentina.

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@rigobertoluisfranquizacost2208]

Muy sencillo y fácil de realizar, antes tenía que mandar afiliar a un tornero, ahora lo puedo realizar yo mismo. Gracias. Soy cubano pero ahora estoy trabajando en Angola

[@InventorSC]

Hello! Glad you liked it and found it useful! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@williewilson8244]

I loved the video!!! Especially with the cost of bits these days 😂

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@МишаМальцев-ч3х]

Побежал в магазин покупать все необходимое для "простой" заточки сверел

[@robertjonessr.4187]

Awesome idea, Thank You 😎

[@InventorSC]

Glad you liked it! Thanks for watching and sharing your feedbacks! Have a nice day!

[@borisisavnin9983]

Не очень понятно, как изготовить сами доски. И процесс их опиловки можно более подробно, желательно в замедленном режиме...

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@Александр-ч3х8ь]

Вообще неплохо бы узнать что за дерево, как оно росло до того как стать доской, достаточно ли было влаги... я с Антарктиды

[@rinzler9775]

The idea of two bolts to check angle is brilliant.

[@InventorSC]

Have a nice day!

[@bloodytusk9897]

Зашёл чисто угарнуть с комментов. Автор, когда коту делать нечего, знаешь что он делает? Купи чашу с алмазным напылением для заточки инструмента и не занимайся тем, что делает кот.😁

[@InventorSC]

Thanks for watching!

[@ТоварищМаузер-ж2и]

Еще один умник. Я стесняюсь спросить, а зачем нужен алмаз для заточки обычного сверла? Без победитовой напайки? 😊

[@reefamannd4999]

Прикольный метод 😂 А не пробовал ручную мясорубку для штробления приспособить? 😂 Обязательно подпишусь! Поржать иногда😂

[@javierl2599]

Gracias amigo ,saludos desde México,excelente video,lo seguiré

[@InventorSC]

Hello! Glad to heat that! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@Александртремаскин-е9д]

Пока он делал приспособу, я бу успел с десяток свёрл заточить)))

[@InventorSC]

Thanks for watching! Have a nice day!

[@user-he1yo9uh5b]

На точильном камне, с электромотором, дома, прямо на балконе.

[@bigle333]

Ну приспособа потом лежит всегда) да и сомневаюсь про десяток хорошо заточенных сверла. У меня опыт и понимаю что такое точить правильно)

[@МаратБонев-м8п]

Я с Вами согласный пока сделаешь приспособу то можно заточить десяток, но десяток заточит только опытный мастер, но так как я не умею точить сверла то мне понравилась приспособа. И это простая приспособа не надо сваривать гайки как показывают

[@МаратБонев-м8п]

Одесса

[@lawrencedavidson6195]

Very nice sharpening jig. Greetings from Jamaica.

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@ВасекМихайлов-п4о]

Если это простой способ, то какой же сложный способ 😂

[@InventorSC]

Thanks for watching! Have a nice day!

[@juhanimustonen2632]

Great videos, thanks for sharing from Finland.

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@игорькургузов-б2р]

На половине видео уснул,потом сходил в магазин и купил новое сверло😅

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@mikerudolph2419]

😂😂😂😂

[@acmr3215]

In a pinch this may help for a minute but there's SOOO much more to correctly grinding a drill bit, back rake, edge angles, edge relief, centering the point......a small 5 way drill gage is extremely cheap... They're available on Amazon and in most general tool stores. If you use this emergency only hand grinder method please please correct your bit with a gage and real bench grinder as soon as you can.

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@ХамитбиКумыков]

Для каждого предмета нужен определённый угол заточки.И ещё, крутишь не в ту сторону,надо сверло от режущей кромки точить

[@InventorSC]

Thanks for watching and sharing your feedbacks! Have a nice day!

[@Hung-h2u]

Thanks for sharing from USA!

[@InventorSC]

Hello! Glad to hear that! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@Сергей-ь2э8ъ]

ЦЕЛЫЙ ФИЛЬМ ! можно еще растянуть серий на 5.

[@InventorSC]

Thanks for watching!

[@ИгорьСметанко-ц9й]

😂😂😂😂😂😂😂

[@stahlreiter]

Simple idea but very good

[@InventorSC]

Glad you liked it and found it useful! Thanks for watching! Have a nice day!

[@aldotomassini1177]

Muy bueno! Saludos desde Uruguay

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for watching and leaving your comments! Have a nice day!

[@ismarrussano1457]

Well !!!! Muito bom !!!! Boa dica !!! Vamos aprendendo !!!! 💯💯👊👏

[@InventorSC]

Hello! Glad to heat that! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@OndasynAmetov]

Я с Алматы.класно

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Wishing you a great day!

[@klassyedward9718]

I will do this, many thanks!

[@InventorSC]

Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@ВадимКоршунов-м6т]

Ну пока ты точишь, я заказал десяток новых, пью чай😊 и смотрю, как ты страдаешь😊

[@InventorSC]

Thanks for watching! Have a good day!

[@svenglennrolfzon1110]

Thanks from Sweden

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@ЕвгенийС-к1й]

Спасибо большое! Санкт-Петербург!

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@marioromanowskij5661]

Muy buena demostración,

[@InventorSC]

Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@stacysimon8864]

That, is in no way close to how a drill is sharpened. Before you make a video on drill sharpening, learn how a drill and it's geometries work. Let's not forget to mention how unsafe that setup is.

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@Bob10199]

But we are all watching and he is getting views

[@vstrom9586]

Great video. Cheers from Canada🤓

[@InventorSC]

Hello! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@henrybaskerville3893]

Когда увидел гвозди - прослезился. Что же это мы, недоразвитые, всё саморезами, да саморезами?...

[@InventorSC]

Thanks for watching!

[@111sdj]

скажи спасибо что шляпкой внутрь не забил....куда нам до них в США в Канзасе

[@-QR3JN]

А я обычно другую сторону точу, за то не тупится🎉😂

[@АлександрЛобанов-ю8ъ]

Эти гвозди не от той стены!!!😂😂

[@александрсумов-г4б]

Мне видео понравилось. Дёшево,надёжно и практично.Приспосбление,на мой взгляд,позволяет соблюсти все углы и параметры. Когда ты уставший,много работы,делать это это "на глаз" очень сложно и нервно.Конечно,есть профессионалы,еоторые делают это на раз,но большинство столкнувшись в самый неподщящий момент с тупым сверлом,будут рады это подсказке.Этот парень работает головой,и,в курсе дела.Спасибо,удачи!

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@polius7193]

Точить сверла чем угодно, но только не наждачкой, да еще такой зернистости.

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@РусланШакин-ц7о]

А ещё можно зачистными дисками точить, а вы не знали.не только на камне))))

[@111sdj]

а чем точить? Полировальной машинкой? c 2000 зерном? Ты наверное и точить-то не умеешь...сидишь тут умничаешь

[@ДанилаМастерЛомастер]

Без проблем на гриндере на наждачке точу..

[@wdufour54]

Brilliant !!!!

[@InventorSC]

Glad to hear that! Thanks for watching and leaving your comments! Have a nice day!

[@aparecidomiranda1191]

Tope Mesmo Parabéns gostei muito

[@InventorSC]

Hello! Glad you liked it! Thanks for watching and sharing your feedbacks! Wish you all the best!

[@wallysharp6162]

That was awesome thank you and I’m from Pennsylvania

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@РусланШакин-ц7о]

Здрасте, приспособа норм, но свёрла точат, не с затылка к колбу, а наоборот. Вот так.

[@InventorSC]

Thanks for watching! Have a nice day!

[@Alotipsalo]

I’m deeply impressed at your craftsmanship

[@InventorSC]

Hello! Thanks for watching and sharing your feedbacks! Have a nice day!

[@alekistra]

Заточить и то что он тут сделал - две большие разницы🥲

[@InventorSC]

Thanks for watching! Wishing you a great day!

[@BobJonesDadmech]

Thanks from Slippery Rock, PA

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@johnnys4782]

Don't quit your day job.

[@InventorSC]

Thanks for watching! Have a nice day!

[@adexjamiran73]

Awesome 👍

[@InventorSC]

Hello! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a good day!

[@waylonmccrae3546]

2 HOURS Laaaaaaterrrrrrrrrrrr ...............

[@InventorSC]

Thanks for watching! Have a good day!

[@AlfredoHernandez-yy4lb]

Muy buena idea fácil de hacer y muy práctico la manera afilar gracias por compartir

[@InventorSC]

Hello! Glad to hear that! Thanks for visiting the channel and sharing your feedbacks! Have a nice day!

[@ВиталийНевмержицкий-з4о]

Неуч который нахватался вершков, а про три минуты уж молчу.

[@InventorSC]

Thanks for watching!

[@DraganIlich-r1s]

Thank you Sir 🎉

[@InventorSC]

Hello! Thanks for watching and leaving your comments! Wishing you a great day!

[@НиколайКочкин-б7е]

После такой заточки сверло трет, а не режет

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@tville7043]

Thanks for the video. God Bless. NW ga. USA.

[@InventorSC]

Hello! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@jimnunya1253]

I forgot I was playing this video and I went to the store and bought a new drill bit and now I'm back! Looks like I got a sharper drill bit a little faster than this guy!

[@InventorSC]

Thanks for watching! Have a good day!

[@daviddavies8637]

What a funny but sad guy you are, I don't think you could walk or drive to a store, find the drill you want, pay for it and then get back home in 3 minutes. This guy used no petrol, virtually no cost and he can re-sharpen and use all his drills many times over as and when required. Very sensible and economical. Well done InventorSC, well done.

[@jimnunya1253]

@@daviddavies8637 but I did.

[@leocouppis5553]

Bet you have a beer gut too! lol

[@daviddavies8637]

@@leocouppis5553 Look, another sad guy, WOW.

[@ahmadniknejad738]

Hi I am from Iran ❤❤

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@игорьприходько-г3ш]

Купи точило и не мучайся.

[@InventorSC]

Thanks for watching and leaving your comments! Have a nice day!

[@111sdj]

купи фрезеровщика и токаря и пусть точат, не мучайся.....купи мозги себе...советчик от бога...я чтобы 2 дырки просверлить в квартире поеду точило покупать...у тя всё нормально с черепушкой?

[@lorenzoalmendarez8506]

The Time it took you to so-call sharpen your drill. I could sharpen ten of them. What a waste of time on one drill. By the way you sharpen from the front tip to the back to releave the rake.

[@InventorSC]

Thanks for watching! Have a nice day!

[@steveharmon9000]

you're a miserable south end of a northbound horse aren't you?

[@fahey5719]

This is an *EDUCATIVE* video, slowed down for inexperienced users. But feel free to make a high speed one showing your _amazing_ skills. 🤣

[@МТЗ-счастливчик]

​@@InventorSC11a

[@bobmudloff4585]

It's easier doing this by hand rolling the drill with your fingers. Quicker to.

[@metalicasjr858]

Excelente trabajo

[@InventorSC]

Glad you liked it! Thanks for watching! Have a good day!

[@aabbccaabbcc9457]

That's not an easy way. That's so difficult and time consuming. 👎👎👎👎👎

[@InventorSC]

Thanks for watching! Have a nice day!

[@nothankyou5524]

On a jobsite, when you need something done, fast, slow, or in-between, the GC wants it done, then and there, not the next day because something needed to be done off site. Most Techs carry a set up like this, even if they only need it once in a career.

[@WanderF11_youtube]

確かにこれなら手軽に素早く研磨できる。 でも加工する物や状況に合わせて研磨する時に角度を変えたり刃先の形状を僅かに変えたりするので やっぱり手で研磨するのが好きですね😉 切粉の排出を奥側に出すか、手前側に出すか など研磨を工夫すると仕上がりに差が出ます👍 わざとバリを作り、それを利用したり まるで難解なパズルを解く様に制作を考えるのは楽しいです😎 🇯🇵

[@InventorSC]

Thanks for watching and sharing your feedbacks! Wish you all the best!

[@icemancometh1621]

Why did it take an 8-1/2 minute video to show how to sharpen a bit in what's supposed to be 3 minutes?

[@InventorSC]

Thanks for watching! Have a good day!

[@Алексей-и3о7л]

​@@InventorSC Благодаря такому приспособлению стал затачивать всё подряд , ножи , вилки , ложки , телефоны , айфоны , стулья табуретки , двери , и даже пальцы !!! Спасибо !!!

[@sahgentpeppah]

I was just going to ask the exact same question...

[@AlexAlex-tj7vp]

​@@InventorSC При́вет из Москвы.

[@ЛехаЗаболот]

1:01 1:01 1:03 😊😊😊

[@erdogantunbel9377]

Hı. I am from turkey , work well 👍

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for watching and sharing your feedbacks! Have a nice day!

[@PajenDIY]

Amazing idea

[@InventorSC]

Hello! Glad you liked it! Thanks for visiting the channel and leaving your comments! I appreciate that! Wish you all the best!

[@Chad-y8j]

Great idea, i will be Subscribing and i am from Lachine, Michigan

[@InventorSC]

Hello! Nice to meet you! Glad you liked it! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@jospit1559]

Muchas gracias por tus videos. Ojalá continues compartiendo tus conocimientos. Saludos desde Argentina

[@InventorSC]

Hello! Nice to meet you! Thanks for visiting the channel and leaving your comments! Have a nice day!

[@bluecollarbiker8005]

Will you go through all that trouble to sharpen a drill bit I just went to a store and got a drill bit sharpener and I can sharpener and a can do in in 30 seconds

[@InventorSC]

Thanks for watching and sharing your feedbacks! Have a nice day!

[@DavidJones-ih1gf]

great job

[@InventorSC]

Glad to hear that! Thanks for watching and leaving your comments! Have a nice day!

[@alanrainey5022]

Nice. But ive been sharpening drill bits hand held with a bench grinder for years. You just need to be mindful of the angles and the lead in to the cutting edge. An angle grinder even works.

[@InventorSC]

Thanks for visiting the channel and sharing your feedbacks! Have a nice day!

[@ramirorodriguez8650]

Monterrey NL m gracias por todo gracias

[@InventorSC]

Hello! Thanks for watching and leaving your comments! Have a good day!