Stock LS on eBay Turbos Goes 5s!

*Support The Channel*
metigulous.com...
Wyatt's Channel - / sketchyda
Insta: Metigulous
Facebook: / metigulous

[@TheTuttleCrew]

"I get by with a little help from my friends!" Thank you Wyatt!!

[@EASTSIDERIDER707]

Everybody needs a friend like Wyatt to keep them in check.

[@HashCracker]

And to keep them warm on those cold colorado winter nights.... so warm so cozy so tight...so masculine, or so not... although i think wyatt should show more skin and stop being such a prude. Hes so mysterious like is his dadbod hairy or not, does he have a sexy farmers tan or not...

[@Metigulous]

@@HashCracker 💯 😂

[@Metigulous]

CAGE COMING SOON BOIS 😎

[@jimxiong04]

Congrats

[@Nebbia_affaraccimiei]

8's too?

[@jmyd83]

I've never heard that before lol

[@NitroGuyJH]

Gonna get that Kyle cage finally. Lol

[@brd64021]

Some of those plug wire covers with the metal rings can be unclipped and re-clipped, don't know which ones you bought tho

[@chicagovasko]

Man this is one of y'alls best videos Wyatt is funny af. Kyle gotta hook you up with a cage. Hayden get the heat sleeves for the wires. That was fun cause I remeber the beginning of this build then I rember blowing up the motor at pfi speed shop. Now the rx7 is a beast. Thanks for posting. ✌

[@jameswallace1283]

thats kevin on the kart. My stepdads brother. Hes a great guy and has dragged all his life. All he is doing is looking out for you. I told you months ago he'll get you if you keep going fast. That's his job as directer of the track.

[@joshfeister6566]

Dude on the kart is one of those asshats who think they have some kind of power Trip lol he said he was getting a cage haha techs are like that here too wanna be more than what they are haha

[@jameswallace1283]

@@joshfeister6566 lol ummm he is the track director. He's a ass hate cause he is the one who helps wipe his ass off the track if he wrecks. Think about it if it was your track man. He is just doing his job, and that's to keep people safe and trying to keep that place open to let them do what they love to do. I talked to Kevin this morning and he said they are more than welcome to come back the second they get a cage in that car and get it through tech.

[@MrRosentrotter]

James Wallace everyone takes safety too seriously. Relax please, if he wants to risk it thats his risk to take. Hes on a power trip lol

[@Ricky-nq7lu]

He's there for the safety of all at the track guy's so chill as the man was just doing his job. Plus anyone with a brain that works would know it's should have had a cage built into it when you built it full stop. I've had to clean body parts up off the track guy's an it really messes with your head knowing that was someone's son so i stand with Kevin on this.

[@TheAbstracTSniper]

@@MrRosentrotter it's not just for his own safety but for those who are at the track as well. There's a reason for everything.

[@123stingray123]

Never mess with the ebay turbo boys🔥 I guess you need a ebay roll cage than your bullet proof !!!

[@jvh22a]

That would awesome and scary!

[@ryandowns1507]

What's wrong with ebay turbos if you just check em once inwhile. Ive seen many cheep turbos last years

[@VagueMemory]

When you look at it from the track manager's perspective, the track has the responsibility for not allowing a car without a rollcage to go over a certain speed. If the driver wrecks his vehicle and hurts or kills himself due to not having a cage, as far as legality goes, the track is liable and the drivers family has the potential to sue the track for a hefty sum. All of that to say, the old man had good reason to give them a stern warning. His job is on the line in a situation like that. In today's age, a track owner could randomly watch a YT video like this and see that a driver was being allowed to run too fast without a cage and the track officials did not do anything about it, then the next thing you know, a manager or employee is let go.

[@wpgspecb]

ya - fuck Metigulous

[@superbarnie]

Don't the tracks make you sign a waiver to remove any liability on their part?

[@michaellinn243]

If they do sign one I would think it would still harm the tracks reputation and also I would hope it's more about them caring about human lives and not wanting innocent people dieing and destroying families because they allowed it to happen

[@Fluff304]

The drivers sign a liability waiver. What DOES happen is that the track loses their NHRA certifications, so no more NHRA events there again.

[@dimmn82]

A waiver form doesn't hold up in court. The judge will simply say they shouldn't have been allowed on the track. It's a liability issue. I really don't see what people don't understand about this.

[@burnman1231]

That thing needs a cage. Love how far this build has come, keep it up man!

[@macro820]

SHOULD HAVE HAD A ROLL CAGE 3 MONTHS AGO just saying

[@FreddyDUZ747]

Jog on champ.

[@Metigulous]

YOU RIGHT 😂

[@tma4137]

Why state the obvious?

[@macro820]

I just want to see a real mother freaking pass not a brake at the end bull s pass. And for you to not die.

[@theangryitalian7922]

FreddyDUZ747 safety 3rd... it’s all fun and games until you’re in the hospital or dead.

[@jblaze0382nj]

Good for you brother! You met your goal! That car came a long way brother! You be pat yourself on the back and be proud of your hard work!!!

[@dinkplayer3238]

When they say dont bring it back is what makes a true street racer!

[@NitroGuyJH]

12:00 Seen Kyle scoping out the interior for the cage he’s gonna be building. Lol

[@glampstronzartonalbee3097]

i hope kyle doesnt do it, hayden will make it better

[@_Bonez12]

@@glampstronzartonalbee3097 hater

[@426moparman426]

Glampstron Zartonalbee kyles got more experience building cages....just saying

[@Shadow0fd3ath24]

Nah hayden and wyatt bought a bender so they could do it themselves

[@Shadow0fd3ath24]

@@426moparman426 doubt it matters when hayden fabricates and welds/bends tubing all day everyday as a living and has done cages for years. Plus he said hes getting the tubing from kyle to do it himself

[@von...]

yo so I am a computer engineer w hella electrical engineering & integrated circuit experience. What you could do if you wanted to keep the ECU setup you have now but with 2 seperated up/side pipes (instead of them joining into one so you can use 1 o2/wideband sensor) is have me or some dude build you a little box to plug the 2 o2 sensors into and then what it would do is constantly add the two voltages together (sum them) and then divide them by 2 (which can be done with a simple resistor or other setup) aka average the reading between them, and then plug that into you ecu so it looks like there is 1 o2 sensor to the ECU and you will have the same ECU side logging abilities w/ the banks combined/averaged between them that you have now but then gain the ability to put 2 dyno-type wide bands in there to get accurate per bank wideband readings. just a little "im high, just got off work, and want to see the homies do good" idea rn lol it would be a super simple circuit setup and you wouldnt have to change your ecu setup at all to do it, just add the box in-between the 2 o2's and then have a single wire to the ECU but it would give you the ability to do real per bank logging at the dyno + give you the ability to just toss the box if you go after market ecu and plug both o2 sensors into it. All that's required on your side is to make 2 up/side pipes which you obviously can knock out. just tryina give you ideas how to go up from your current setup in steps.

[@brianwellingtonlewis]

lol, a couple resistors will get it done as well. No need to break out the OpAmps.

[@von...]

@@brianwellingtonlewis I just have hella FPGA experience so I am so quick to pull out the "lemme build you a black box" integrated circuit thing. I am sure if I looked at the output signals of his o2/wideband sensors + the signal the ECU expects there could be a simpler solution like a resistor but if you do it on an FPGA you could program logging both banks' AFRs into it's IC pretty easily that's separate from the probably pretty limited logging on the stock ECU he is using (along with a much higher sampling rate to detect ignition, fueling, or sensor issues easier), but that's making assumptions about his ECU setup I don't actually know.

[@Cekmore]

Oh talk Nerdy!🍻🐈🔥

[@________llotuss_______________]

its like watching beavis & butthead, just they're into cars

[@RS_barrelracingoff]

Mad respect to you and wyatt for doing your own thing with different style. Like for real if I had a chance to hang out with the group I feel like honestly you and wyatt are my people because you are real.. I know the other guys try to keep it clean for viewer numbers but I'd rather hang out with people I know than people who put on a show.. stay true to who you are..much respect.

[@Ziets]

God dang Hooligan. No roll cage upsetting the old folk.

[@MrLarsgren]

about time they stopped it. next video should be about cage building

[@freedomfox8183]

@@MrLarsgren they only stopped it because their insurance and they don't want to be liable if he gets hurt or worse.. but for 1/8 mile he's not going that fast normally so he has been good ..

[@MrLarsgren]

@@freedomfox8183 its still more fun to race a caged car than beeing scooped out of a uncaged one. kzbin.info/www/bejne/gpvQqWltgt18b9k

[@wombatonsteroids]

They let him run for a LONG time without a cage. Honestly the fact he passed tech so many times with this car is amazing.

[@freedomfox8183]

@Ada 1812 a lot of smarter folks who don't want to see him hurt or die.. running the 8th mile is one thing because you got out before you get above 110 * 120.. if people didn't care about him they wouldn't say anything

[@1gsrtom]

Lol that 9.6 @ 96mph was awesome, great video

[@bradross1188]

9.96 close enough though.

[@p0m1gr]

first time watching any of your videos, and, even though I'm kind of a rotary butthurt, I freaking love this. And that 8 rotor plate? Genius.

[@jtaylor2563]

That's a good feeling!! kicked off for going too fast!Better than being kicked off for oiling the track down LOL!

[@alltheboost5363]

God damn it son.. you knew this was going to happen. Good job by the way... especially ducking out and loading it straight into the trailer. Lol

[@carlobrigante881]

Here for the (i told you so) comments 😁

[@freedomfox8183]

Yea most of them Because they heard Wyatt say it..they were his old plugs to begin with..

[@Michigan_LT1]

Finally a cage, time to make a deal with a roommate

[@TurboWorld]

That rx7 hauls that azz tho.Man . The boosted boiz sounded like Rick Flairs cheer team when they yelled woo at Romans last past. Looked like a great time, had fun watching it all! Thanks for sharing!

[@constantinee4631]

Brother I really enjoyed the hype and excitement you show in the one. I can only imagine the feeling.. I had to sell my mustang right after I rebuilt it from the ground up.. my babies needed a newer safer car when the daily died... Never got the chance to run it..super happy for you man

[@jpsspeedgarage7168]

Congrats!! Awsome you shut down all the haters. Love cars like this!! Super budget, junkyard dogs, inspiration to a lot!! Get the cage now.

[@bradleykunshier7705]

Hell yeah guys!! Well worth getting kicked out for sure. Best video in a while

[@davidring2438]

GOD DAMN ! THAT THINGS A HELLRAISER . Time to beat up on your boosted Bros . Lol

[@MrJmoo123]

Wyatt is the man!!! Can’t wait to see his duramax build!

[@jamesireland9188]

Comment section always makes me laugh so many professional mechanics on here everyone is a know it all.

[@hegeliandetective1034]

You: "You're a know it all" NSA: "We know everything"

[@dieseldabz7104]

Just like yourself I'm betting

[@cooliodiablo6117]

That’s how the comment section works on KZbin, only experts on the subject matter of the video at hand are permitted to comment. Duh...

[@huckilt]

3:30 did you say they’re not as worse as the other ones? Lol I’m dead😂🤣😂🤣

[@rikkert1996broekhoff]

Oh well.. Time to get that deal with Kyle sorted 😝 (Kyle janks a cage in the rx7 and he gets some sweet manifolds)

[@EtherGaming604]

Why would Hayden get kyle to do his cage? Hayden's a much better fabricator than Kyle 🙄

[@Juan-ic5wv]

@@jorgecorrales95 fr

[@thevampiredude7]

got to remember hes also running a business takes a lot of time to build a cage, and Kyle has probably put in more cages at this point besides from what I've seen you about have to do gymnastics to weld up those cages and i'd guess Kyle better at that.

[@krazyfiend]

Epic video! Keep up the awesome content and this build on the off season. Would like to see your welding skills w the cage

[@Out_the_mud94]

I’m building a 84 rx7 with a 5.3 and gt45 eBay turbo. Nice to see u going fast with pretty much the same style. I have a th400 behind mine and will be using a 8.8 now that Iv seen this video. Sweet car dude

[@DNRAuto]

Congrats man that's awesome, can't wait to see you put the big one to use!

[@zethloveless7238]

By far Wyatt and Hayden are my favorite KZbin lesbian couple 🤘

[@hegeliandetective1034]

The build is great, with smaller turbos in a light chassis, shit flies. Once you do have a cage, what I would do, is cut up a hood, to fit around the engine setup but leaving open space for your turbos to eat air, and do some under-carriage paneling, for drag efficiency. It's an insurance thing, they don't want to have anyone die up there, looks bad on them, the could get shut down if they're not holding people to the rules. Regulations in a blue-state, are harsh already, they'd love to shut down a drag-strip, it's in their DNA(it seems). Just wished we could see a full 1/4th mile pass, with a cage, is all, because I know that car is fast af, always knew you could build a fast car with that setup. Never once doubted you about the turbo choice. I'm a fan of smaller turbos myself. Just want you to not get kicked out or hurt.

[@skyeadventures1387]

Hope everyone has had a nice day

[@VagueMemory]

lol, I always find it funny when I see a comment like this, where someone is fishing for likes by copying a comment that they see getting a lot of success, only to get no success themselves. Now there is a person on every video saying "Hope everyone is having a great day !! :) " cough*givemelikes*cough

[@That_Tallguy]

idk why i havent been subbed... i love how you do your vids! def coming back ive seen you on boostedboiz but didnt know you had a channel! im hyped! love the rx7 build!!! keep it up brother!

[@dremoore9436]

Hell ya Hayden that was sick! Was also nice to see Roman make that 9.45 I had predicted 9.48 @ 149 I was close lol

[@Crossthe_line]

Hey man I was curious if you did anything inside the engine at all and is it a 4.8 or 5.3? Congrats on the 5.84

[@okobojian1860]

Shawn Cross it’s a 5.3 gen 3 gen 4 rods and pistons. I think that’s it could be wrong. 😎

[@Crossthe_line]

Just now going through this channel to see what the setup is. I have a TT Maverick but looking for actual completely stock builds.

[@Jeremy-xc2jo]

@@Crossthe_line kzbin.info for all your stock ls engine needs

[@GeneFever]

"I gotta kiss ya bro!" Hayden 2019

[@BradGryphonn]

"I'm not saying we told you so, but WE TOLD YOU SO!..."

[@freedomfox8183]

Congrats on your 5 you've been after .. that's moving..

[@luke_james]

Still think big single turbo would be sick mount it behind the headlight so when u wanna race it u pop the one light up and bam there is the turbo captain ebay spoolie boy 🙋‍♂️🇦🇺

[@minibikemadman]

Someone welding as good as you i dont know why the hell you didnt put a propper cage in.

[@slav7447]

hes an idiot..........

[@arcadiagreen150]

Being able to weld and being able to plan cage geometry are two very different things. It's seriously not easy.

[@Zach-gg6ct]

@@arcadiagreen150 you think making manifolds doesnt require any geometry? if anything its more tedious because of the smaller welds and the planning of the shrink.... Plus Kyle even said he would help him in his video... NO EXCUSES

[@okobojian1860]

Hey ever heard of money!!!!😎

[@JoeCurtis82]

@@Zach-gg6ct yes and no........the thing that makes building roll cages difficult isn't the design of them..it is the bending the of tubing that's difficult as those mandrel pipe benders (thats if he even owns one) despite looking proper easy and straightforward ain't easy to use....its not just a case of knowing the angle you want and bending it..trust me

[@derekmelton3915]

Ok now you just seen the wisdom of having more than one set of eyes looking at your car you can do everything yourself but it's always good to get a second third fourth fifth opinion. on that note good job man that was awesome to see I just subscribed to your channel and can't wait for you to run 8

[@kalegrubb5975]

Dig the ride and dig the excitement! Just earned another lifetime subscriber!

[@LS__812]

Wyatt drinking Mountain Dew watching Cleetus blow up his car. Lol

[@InterestingEndeavors]

Love y'all in videos together! Hilarious. And heck of a build.

[@joshknight8953]

Congrats on the 5's, About to finally start up my turbo ls rx8.

[@SXJEREMY]

Deffs show us a video. That sounds pimp 👌🏻👌🏻

[@eaglebrink]

That better be a 7,5 sec cage cause you'll be flying by next season!!! :-) ;-) Awesome job guys!! That thing rip's!! Look at the wheely's it does!! Love it!!

[@edgarsplume2857]

This is getting interesting. Seen some of Hayden's videos before, but always felt like whole build thing was a bit slow compared to boosted boiz. But hey, finally there - great job. Worth subscribing to see some ass kicking on the track :) .Get that roll cage and let's go.

[@MonkeyFabGarage]

Congratulations hommie.

[@Danger-Dave]

I cut the metal rings out of the heat shields and used 2 inches of 1" heat shrink on each end to keep em from fraying and it holds it in place as well...

[@1234extremelyreree]

@14:33 "The Asians going against the Italians" :) Hey, McLaren is British :)

[@glampstronzartonalbee3097]

FUCKING CONGRATS DUDE!!! That baby fucking moves, cant wait to see it with a cage going full tilt down the track! Cheers

[@rodneyf.9595]

Dang dudes wish their were friends to race together . Great runs 👍 I will be keeping with y'all awesome job !

[@evanjarvi406]

Keep it super budget build and use PVC pipe for the role cage and paint it imagine the weight savings.Lmao JK ,congrats on the 5's the ol rx7 is rockn!

[@MLGVashLive]

Evan Jarvi yeah cause that’ll pass tech dumbass

[@bryanandcami08]

That car is a beast. Good job! Keep up the awesome work man.

[@jasonkerekesch5012]

I miss my Rx7. It was nothing like this one. It wasn't stock either. It was so much fun though. Scaring my friends by driving under 18 wheelers on the highway was priceless. Stupid but fun.

[@Rob0450R]

Congrats on the 5's

[@juanvazquez-so7os]

Cool video! Thumbs up and subscribed. Keep it up!

[@trentm7964]

Cool. But you need more than a cage. Axles, transmission shield, sfi flex plate and balancer, Probably a window net. That's why they wanted you in tech, so they could let you know that. Oh and NHRA membership and license. Totally pumped for you though. Nice work.

[@twotwocold]

@9:10 Dude I'm a kiss you on the forehead "Get The Fuk Away From Me B!tch" 😂😂😂😂

[@stufadrummer]

Awesome brother cant wait to see what you put down when you don't got to hold back

[@christophertew5026]

An 8.50 cage wont do it you'll be doing that by next season

[@baby-sharkgto4902]

Easy now. Not with a budget.

[@BassManBobBassCovers]

Single turbos are usually a lot more efficient and yield more power. The RX7 might be nuts after the swap and probably will make those numbers!

[@baby-sharkgto4902]

@@BassManBobBassCovers even if the stock engine was capable of holding together for an 8.50 pass and it's not, do you think the stock rear would hold? I'm as optimistic as the next guy and I like Hayden and all of his gang and all of their videos but the fact is there is MAYBE 3 tenths left in it at this budget level. Yes he can build the engine and rear to go 8.50's. Different budget is all. There's a huge difference in 9.70's and 8'50's.

[@BassManBobBassCovers]

@@baby-sharkgto4902 Stock block LS engines don't really hold over 800. Depends on the tune..

[@jordancochran7979]

@@baby-sharkgto4902 His 9.70 was like 6 tenths slower in the 1/8th. Realistically he is low 9 seconds with this build not 9.70. Edit: Maybe it was 5 tenths, but still.

[@SpartanRacing1989]

That guy looked like he would have been the uptight hall monitor in school. 😂🤣

[@MrDannyd9]

2:21 glad to see Hayden in the videos

[@esqueue]

Wyatt.

[@MrDannyd9]

The joke went over your head...

[@esqueue]

@@MrDannyd9 You almost make it seem that it's my fault that the joke's horrible.

[@MrDannyd9]

esqueue you haven’t been a fan long enough than

[@luissebastianguerreroaceve6226]

Doin it big!! Congratulations from Chile bro

[@benricher9717]

I like this guy. hes cracking my up.. real dude for sure

[@astonmarjo]

Damn bro she's getting it done. Congrats

[@EmotionalTree]

Will you go 8's before sloppy mechanics. Lol Great work!

[@ROFLWOFFL]

I'm a total newbie when it comes to a drag strip; what is everyone warning you about? Are you going too fast? What does 9.90 mean? :x

[@IvelLeCog]

A sub 10 second 1/4 mile is very fast. I believe at a certain threshold, a roll cage is required as more speed means more mess if somebody has an accident. 5 second time refers to his 1/8 mile time, which is a good indicator for potential gain as one of the barriers to low times is having traction and maintaining it. The initial launch is also very important for getting a low time, this guy seems to have his launches on point

[@bserieshatch1]

Kyle's got that work.

[@FastLaneLyfe]

That guy on the golf cart loved the car!

[@sawfather06]

Screw other people's opinions u are doing great

[@AvatarNecron99]

Congrats on the time! What does that thing weigh again?

[@MrThe302crew]

Wyatt a chill nigga with knowledge

[@dlpereira]

Make sure you seal up that sheet metal when doing the cage. Gets a bit smokey in there. lol

[@danidge]

That thing is Dee ee eecent! awesome to see you smashing it Man (Y)

[@Cekmore]

Just have have some RESPECT for the people that want to keep YOU ALIVE! 🍻🐈🔥

[@jessev2197]

Make sure you aren't using silver anti seize on plugs. One drop of oil on fresh plugs. Proved it on dyno. The glass in anti seize can act as an insulator causing random misfires.

[@drron5608]

Hard work pays off good job

[@justintisdell7001]

Great job man! As Red Foo sung LETS GET METIGULOUS! WOOT WOOT!

[@edwardmatthews5899]

Yeah Wyatt's got the idea compound setups are where its at.

[@colt098]

All the boys are running 9’s

[@PetersPan24]

Congratulations. Good racing.

[@I8A4R3]

Subbed........respect from AUSTRALIA 👍😎

[@killer86coupe]

Awesome bro!! Congrats on those fast passes and it’s only gonna get faster. 👏 👏 👏

[@JamiePlattsplatt860]

Found you through the BoostedBoiz. That rx7 is sick

[@jeffgraham48]

I would love to see how far these turbos would go!

[@danielsullivan9865]

You just saw it he needs twins 69 Billet Bogue Warner's with 73 mm turbines .96 a r will run 170-175 easily out the back door 5.20

[@steveslot_botter83hollands80]

🤣🤣🤣🤣 That old dude was pissed! 👌 The RX is a FUCKING BEAST!!!! Can't wait to see it caged and eating everyone's cars up! 💪 You and Sketchy kill me every time with the jokes! 🤣 Keep it up bro fucking love this content!!!! 👊

[@gurugreg1211]

That thing slingshots out the hole gotdamn. And those rear tires fit those wheel arches perfectly.

[@betopistolas4644]

Hell yeah bro!! Stoked to see that 9!!!

[@davidholm1330]

Didnt know about you guys. And first video i see yall watching cleeter. Subbing for sure

[@bullhead360]

While Kyle and you are building the cage, have Wyatt slap on a pair of eBay GT35 tawainese tornados and go for 5.30’s!

[@countrymankdx200]

The track plays some good ass country

[@devdogs911]

Great job guys. Everyone gets kicked out so no biggie.

[@striktlyaudio]

Next video better be a cage or we wont watch until you do! Lmao good run tho dude!

[@NotSoCrazyNinja]

I'm new here, is the title correct in saying this is a stock LS engine with basically the only changes being turbos and a tune? I ask because in the future my truck is getting an engine swap and I want it to be a "fun" swap. Was thinking maybe trying to fit a 6L LS into it (it "might" fit) and turbo it. The curb weight of the truck stock is about 2800lb, will probably drop a lot of weight with the plans I have, or may stay about the same. Was considering a rotary or a generic V8 but LS engines aren't too hard to find it seems so...

[@okobojian1860]

Banana Phone stock gen. 3 with stock gen 4 pistons and rods.