MEYERS MANX 1 LATEST BUILD 2020

[@milomanx6531]

If this video or my response helped you, please donate $1.00 to paypal.me/MiloManx Click on the link. Thank You

[@mikeymike3240]

That is so cute 🥰 looking, it’s absolutely gorgeous and I love the candy apple 🍎 red, it makes the chrome pop. I’d love to have one of those buggy’s, I’ve loved them ever since I was 12 years old when I saw a picture of one on the cover of Custom Car magazine, it was an orange Renegade buggy with sunken head lights in the hood, stunning, and I’m 64 years old and still love buggy’s, the lust for them has never left me. 😎👍👍👍🇬🇧

[@savedtwice7925]

All your builds are beautiful but you knocked this one outa the ball park & clean across the harbour aswell !!! FANTASTIC resto .... Simply GORGEOUS !!!

[@bcbee3779]

Beautiful work Milo.

[@kennethmaser1767]

Great job as always. Thanks for the walk around.

[@Tim03xb9]

You do outstanding work!!! I stole a few ideas from one of your previous builds for my manx a few years ago. Also took your advice from your suspension video to set up rear spring plates and my buggie sits correctly and handles like its on rails!! Will be installing a 1915cc Pro Built engine this week. Keep up the good work, I hope you get top $ for your builds, you deserve it.

[@milomanx6531]

It's always good to hear my videos inspired others. Manx's are a blast. We're keeping the Manx fun going!

[@OmarTavarez]

Excellent work!!!!!

[@marcbennet3932]

Very nice Milo as usual! Gas cap still needs turned around. Lol.

[@milomanx6531]

It will look right to you, if you sit in the Manx and look at it that way. "OR" If you buy it for 100K, then YOU can flip it around! Some say Potato, some say Pota'to

[@Sandman1803]

You are an absolute master. Great work

[@bootsy1968]

Beautiful work Milo 👍

[@willskyout]

Hi Milo, your work is fantastic , congratulations !!

[@milomanx6531]

Been doing this kind of work all my life. Custom fabrication is a challenge, but, I,m good at it.

[@fjimenezbotello]

Absolutely gorgeous!. 🏆

[@dannymadsen5846]

Absolutely Beautiful !!!

[@mikehammer4546]

Milo, you do incredible work, defiantly show quality 👍👍

[@milomanx6531]

Thanks Mike If I sell this one, how much should I ask? Sotheby's Auctions just sold two Manx's. One for 58K the other for 64K.

[@mikehammer4546]

MILO MANX, you never know to the right buyer that could be possible. 🤔

[@waynetaylor420]

Mine had side pods under the body. Was that rare? It seems that I have not noticed many with them?

[@milomanx6531]

Side pods became available long after Manx's were initially introduced. Only sold as an accessory. No Manx bodies were sold with side pods.

[@waynetaylor420]

@@milomanx6531 Ok that makes sense because the one I had was built in the early 70s. Like 71 or 72. 1962 shortened frame and body was 1968. To my best recollection. Thank you for taking the time to indulge my questions. I appreciate you and your work. Great job

[@bcbee3779]

Hey Milo, What is the brand name and model number of your head lights. Thanks

[@milomanx6531]

Autopal HL-102 w/ white halo. Here's a link on E-bay: www.ebay.com/itm/PAIR-2-7-HALOGEN-HEAD-LIGHT-INCL-WHITE-LED-RING-TURNSIGNAL-HEADLAMP-HEADLIGHT/362159224138?hash=item54525f354a:g:J9YAAOSwAKxWUp18:sc:FedExHomeDelivery!32114!US!-1

[@jeffgoswick7660]

Damn that's killer..What do you borrow the seats and steering column from??

[@milomanx6531]

Column from a 1982 - 1989 Camaro. Seats from a 1999 - 2003 Cavalier.

[@jeffgoswick7660]

Thanks for the help ...one day I'll build one of mine

[@adamUDavies]

You do very exceptional work. What are the front seats ? They look comfortable.

[@milomanx6531]

Seats are from a 1999 - 2003 Cavalier, but, You'll have to do extensive modifications to the tracks or adapt them to other tracks.

[@nodems613]

Work of Art

[@jkalberer]

Milo, she's a beaut. Great work!

[@daverowe5351]

Excellent as always - how does the engine sound?

[@milomanx6531]

Sounds great. Smooth quiet running with no oil leaks and pulls strong for a stock 1600 Single Port.

[@terrypapineau6993]

Milo....love your videos. I have a rat nest of wiring that I am dealing with. I watched your video on the cluster wiring. Do you have any videos or thoughts on where and how to hide wiring on the body from front to back? Specifically from the fuse block to the motor and rear lighting. Thank you.... awesome work as always

[@milomanx6531]

If you don't have a wire gutter on the side underneath, I ran the wires into the center channel and then all the way back. Make sure they clear the shifter, shifter rod and clutch arm.

[@fstopPhotography]

Are there kits available so I can order everything at one time and not have to spend days tracking down parts?

[@milomanx6531]

Check MEYERSMANX.COM

[@DC-ow6kv]

That’s a beautiful Manx. I’m curious, what is the back space of your wheels and are you using a adapter? Thank you!

[@markmcaferty8447]

Milo, I like the stance of your dune buggy. Do you have just beam adjuster or beam adjuster and drop spindles?

[@milomanx6531]

Go with the beam adjusters only. If you go with drop spindles alone, you will lower the height, but, will ride very stiff. If you go with adjusters and drop spindles, you will ride better, but, maximum tire diameter is only 21" or 22" to prevent the tire from hitting the fender. Make double sure the weld-in adjusters are positioned properly to lower ride height. Just tack them in and check before fully welding.

[@markmcaferty8447]

Thank you for your help.

[@LongHairRockerTN]

Can you build me one?

[@milomanx6531]

It would cost a lot to build one, 50K to 75K. Let alone finding a real Meyers Manx.

[@LongHairRockerTN]

@@milomanx6531 thanks, ya I guess they would be hard to find

[@mikeskidmore6754]

@@milomanx6531 Oh I thought they are making a New Version of the Manx now? I have had Motorcycles all my life and snowmobiles.. Don't know anything about Dune Buggies.. My guess is the aftermarket must make every part you need that was origionally made by VW but improves .. that you wouldneed to build a dune buggy .. Since you can't just buy an old VW anymore for a conversion .. I live in Michigan they all rusted away decades ago or were made into dune buggies decades ago

[@mikeskidmore6754]

@@milomanx6531 I looked on the Manx web site it was vauge and it froze up a lot

[@milomanx6531]

@@mikeskidmore6754 Meyers Manx Inc. or MEYERSMANXFORSLE.COM My website is working fine.

[@keithbladen8776]

Great video again Larry!!!!!!!!!! Can you please tell me where i can buy the chrome number plate lamp, rear tail light bezels and the chrome front indictors from? there are great. love all your builds.

[@milomanx6531]

Keith, I used original parts and sent them out to a chrome shop here in Florida. Space Coast Plating does show quality work. The Tail light housings may need trimming to sit at the correct angle. Then I buy a thin weathers strip to finish it off. Copy and Paste this link to E-bay www.ebay.com/itm/1-32-X-11-64-Rubber-Edge-Trim-HR69T-SOLD-BY-THE-FOOT-U-Channel-EPDM/352231340880?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[@keithbladen8776]

@@milomanx6531 thanks for the information. I'm building copy of an original Manx based on a 64 beetle but I don't have the original light clusters so will have to purchase some. How much do you trim off the rear taillight housing?

[@milomanx6531]

@@keithbladen8776 Until the lens's are in a strait line with each other and the face of them are straight back. Plus, straight up and down. Most people put them on as is, but, not me.

[@keithbladen8776]

@@milomanx6531 I agree with you.👍

[@andrewdwight934]

Gorgeous Manx dude.

[@markmcaferty8447]

AWESOME! One of the nicest dune buggy's I have seen . Were did you get the chrome rear tail lights and chrome license plate cover? Thank you .

[@milomanx6531]

I sent the originals out to a chrome shop. Expensive, but quality, lasting work.

[@juancarlosperez3503]

Wow si amazing I love that color, dream , dream jajaja

[@Puccazilla]

amazing!

[@chromedome4243]

I just bought a 66 buggy and my body looks just like that on outside. How would I know what kind of body it is. I'm new to buggys this is my first

[@milomanx6531]

Go to "Dune Buggy Archives" click Buggy ID

[@williamisaacs6569]

How mush is it $$$

[@nonstopwebby]

This is awesome! Check out the manx we just purchased!

[@bigshirley3141]

Beautiful

[@GURURAJ027]

Can you please export to India

[@milomanx6531]

When a vehicle is bought overseas, the buyer makes the arrangements to have it shipped. Thanks

[@GURURAJ027]

MILO MANX can you say me the price in Indian rupee

[@milomanx6531]

@@GURURAJ027 5745191.25

[@frankbarnes6948]

You do beautiful work Milo. Can you send me contact info for purchasing one of your buggy’s? [e-mail]

[@milomanx6531]

If I decide to sell one of them, I will list it on my website. MEYERSMANXFORSALE.COM

[@taylordubois4391]

Milo, you are a Pro my friend. I own a real nice Manx now but might have you build one for my brother. Did this burgundy Candy Apple one sell or is it available? How much is it or what did it sell for? My number is 602-315-2086, give me a call please..Marty

[@milomanx6531]

I have the Red Manx and the Purple metal flake Manx. Both are verified and authenticated through Meyers Manx Inc. They are the original Manx 1's that Bruce Meyers built from 1965-1970. Starting in 1968, body I.D. tags were attached to the body,s. Showing production number, month and year of build and the original color. Both of these Manx's have body tags. These are impossible to find anymore. The Purple Metal Flake Manx is originally Purple Fake and the Red is originally Red. I was going to KEEP the Red Manx as a driver and SELL the Purple Manx. The Purple Metal Flake Manx 1 is now finished and it's perfect. Price is 85K. If you have seen the KZbin videos, LINK BELOW, and want more information, please let me know. Thanks, Milo You can also search "Milo Manx dune buggy" on KZbin and see all my videos. The Purple one is in there. kzbin.info/www/bejne/aX_Nq4man9icmJI