MF-01X: Building Video (1/3) - Steps 1 - 11 (Poor Boys RC Speed Run Challenge 2024)

[@Stephan-RC]

Hello Dirk, a very nice video. I think you have explained everything very well. I hadn't paid attention to this during assembly and didn't center the steering servo at the beginning.

[@RCBirds]

Hi Stephan. This isn't the best solution from Tamiya. As you can see in the video, I had several tries to get the right spot on mine either. But in the end it was worth all the attention. Have a great weekend my friend.

[@yodadarksideGreenHawksRC]

Comming on great Dirk! This is especially enjoyable to watch as our m0f 01x came already assembled ,so I didn't get the pleasure of seeing it all go together ! Nice to follow along buddy.😊 👍 👍 👍

[@laboite-a-rc]

👋😊 Nice sharing 👍

[@RCBirds]

Thank you so much my friend

[@marssgamecorner]

Wow amazing my friend 💯👍 Thanks for sharing 🙏

[@RCBirds]

Thanks a lot for watching and your kind comment my friend

[@msfunracer]

Nice first step Video 🤩 You have explained everything very good 👍 Thank you for sharing 🙏Greetings Markus

[@RCBirds]

Thanks a lot Markus. I'm training on this for my channel new style. So finger's crossed, I'll find a solution in the building videos of this car..

[@SevenWelt]

Glück ⚒Auf, Schönes Video, wieder mal sehr interessant!👍 LG Seven🖖

[@RCBirds]

Vielen lieben Dank

[@AdventureTimeRC]

Its a interesting chassis has held up well for me good work Dirk

[@RCBirds]

Thanks a lot Brent. It was an interesting Experience for me.

[@pandacrawler6x6]

A nice one!!! Cool to watch this Great Build ❤ 🐼🏆🐻‍❄️👌🏻

[@RCBirds]

Thanks a lot Antonio. You're welcome my friend.

[@pandacrawler6x6]

You're welcome my Good Friend!!! 😍🤩🥰👌🏻

[@JF-RC]

Hey Dirk, great progress on the MF-01X chassis, looking good so far. Best wishes to you and the family 🖐️😉😎

[@RCBirds]

Thanks a lot for watching and your kind comment my friend. Same wishes to you and your family John.

[@TrickshotTimeHeiko]

Klasse gemacht wieder Dirk und schönes Wochenende 👍👍

[@RCBirds]

Vielen lieben Dank und Gleiches wünsche ich Dir auch, Heiko

[@HaydadRC]

Nice beginning steps to the build Dirk!👍😊

[@RCBirds]

Thanks a lot Jeremy.

[@rcuintheshed6981]

Hey mate like to keep the longer one's for the weekend at home have a good one Durk I'll comment on both vids Sunday night 👊

[@RCBirds]

Thanks a lot Mark. And no hurries, I'm always happy about your visits.

[@coygtrc]

Very nice detailed build 👍🤝

[@RCBirds]

Thanks a lot. I really appreciate it 😊

[@RallyandTrail]

Nice work my friend 👍😎🏁

[@RCBirds]

Thanks a lot for watching and your kind comment Rob😊

[@FastFreddyRC]

Great stuff Dirk! I really liked building this chassis.

[@RCBirds]

Thank you Freddy. And it's fun to run

[@rcuintheshed6981]

Yer mate I got all the way through nice work Durk keen to see it finished 👊

[@RCBirds]

Thanks a lot Mark. I really appreciate your support

[@reitplace4765]

Great Info Dirk, good video and advice on buiulding.. Enjoyed as always my kit had items in the wrong bags it was confusing at times.. lots of greas haha, Awesome bud lets get her out there and run!!!!😎🤙👍

[@RCBirds]

Thanks a lot for watching and your kind Paul. It was really cool to do a Taniya kit again. The last one feels like ages away😁.

[@gottfriedrc]

Top! Schönes, kurzweiliges Aufbauvideo 👍🏻

[@RCBirds]

Danke sehr Dirk. Ich teste da gerade was aus. Diese "Blubber"-Videos haben einen gewissen Charme.

[@sparetimerc]

Hi Dirk, better safe than sorry, I would do the same when applying grease to the gearing. Like the detail explanation, If I was building this kit I would follow you step by step. Take care and best wishes to you and the family.

[@RCBirds]

Thanks you so much Al. This means a lot to me. Same wishes to you and your family.

[@UrbanLegendRC]

Nice Dirk get job keeping everything organized

[@RCBirds]

Thanks a lot Ty. Only whe I do Lego I have a hige mountain of non sorted bricks😁

[@MechanicallyFun]

Great build👍

[@RCBirds]

Thank you so much😊

[@UncleBobsRC]

Great Job Dirk!!!!!

[@RCBirds]

Thanks a lot Bob. I really appreciate your support

[@BasBoyRC]

What surprised me as soon as I saw one of these built that it's sort of a redesign of the old TL-01 chassis and has the gears from it. One thing way better an adjustable motor mount. A dead centre servo very rare.

[@RCBirds]

Thanks a lot. Fortunately the gears fit. Do yeah to the speed gears. What the servo does good, the chassis adapters for the servo did bad.🤣

[@Wurstkommission]

Moin Dirk! Zuerst hatte ich ja gedacht, dass so ein 26-Minuten-Video ewig dauern würde, war dann aber doch überrascht wie schnell die Zeit vergangen ist. 👍

[@RCBirds]

Danke sehr. War mir zuerst auch zu lang, aber mit der Musi und meinem Geblubbere geht es. Notfalls kann man auch nach Bauschritten die Kapitel ansteuern. Konnte dieses Auto aber auch leiden nicht über Wochen bauen, da das Rennen derzeit schon läuft. Die anderen beiden Bauvideos werden leicht anders sein, danach gucke ich mal, was das Publikum am ehesten mag. Daher danke für's Feedback.

[@rc-diy7864]

hello good job 🤗😍😄

[@RCBirds]

Thanks a lot😊

[@rcicons4915]

Great start Dirk

[@RCBirds]

Thanks Keith😊

[@Rcloverofficial]

Cool 🏁🦾

[@RCBirds]

Thanks a lot😊

[@g.b-MTB-trail-jumps3062]

great spot mate💪😍

[@RCBirds]

Thanks a lot😊

[@All_RC_Fun]

Good build progress.

[@RCBirds]

Thanks a lot Trey. I really appreciate your support.

[@YARCWest]

Nice walkthrough

[@RCBirds]

thanks a lot Corey

[@ShenRC]

A weird chassis this one, no doubt you forget the foams i don't know why they made the chassis this way and made you have to use all those stick foam?? Should be fun trying to drive it really fast!

[@RCBirds]

Thanks Steve. I'm not sure either, what the foam parts're for. For me it's the chassis might be constructed around the changing of the wheelbase. And the rest was done under the thought: " We still have to do the rest..."🤔

[@jercsgn]

Nice progress!!!

[@RCBirds]

Thanks a lot😊

[@WalkingTours-TV]

Can't leave you without Like and Sub. That was awesome !👏👏👏 ❤🧡💛💚Full Support 💙💜🤎🖤🤍💯 😊👍Greetings from Istanbul - Turkey 🇹🇷 🙋🙋‍♂🙋🙋‍♂34

[@RCBirds]

Thanks a lot for watching and your kind comment my friend. I really appreciate your support.😊

[@rc-dom-uk]

what you think so far mate . my advice put a good servo in as it’s a pain to replace 👍

[@RCBirds]

Thanks a lot Dom. I keep that in mind. Now it's too late. I trust these cheap 20kg ones. Never had an issue before and the Tamiyas still work with 5kg😉. I hope the servo'll last for this event. After this it might a nice evening in the garage to change it. Have a great weekend my friend.

[@rc-dom-uk]

@@RCBirds yeah you have to take so much apart to replace it . i use savox metal gear - about 6kg . expensive but are reliable 😊👍

[@RCBirds]

@@rc-dom-uk cool, thanks for the tip

[@PrizelTatzeRC]

Startest du in zwei Kategorien? Bin jetzt gerade etwas durcheinander😅

[@RCBirds]

Nein, nur Klasse 1. Habe aber die ersten Läufe vorgezogen, da ich auf's Board wollte. Das ist jetzt der Bau des Wagens.