Racing Midget front brake upgrade with JLH kit from standard brakes Changing rear shoes before MG Live Silverstone June '17
Пікірлер: 19
@johnegan40566 жыл бұрын
Glad I've found this video, I'm picking up a JLH set next weekend so very useful thanks
@ianwhitt53446 жыл бұрын
Remember to pack with grease and check the radius washers are facing the right way Are you using for racing or road
@joesjunkgarage33137 жыл бұрын
Thank you for this video. I've been researching front brake upgrades for my 1979 LHD MG Midget here in the States. This was very helpful!
@ianwhitt53447 жыл бұрын
Thanks. The brakes have proved very good, for a road going car they are more than adequate.
@stevenbrown56953 жыл бұрын
Can you tell me anything about the upper A arm(s) mod.
@Northyorkspaul6 жыл бұрын
good effort but what went wrong at the end..and yes missing the grease in the hub was a bit iffy...and the rear brakes were glossed over,no adjusting no mention of handbrake..just saying!
@KristianHergott7 жыл бұрын
Hey Ian. You need to upload some new racing videos soon ;-)
@ianwhitt76677 жыл бұрын
Hope to be out on 10.9.17 but currently repairing a holed piston
@KristianHergott7 жыл бұрын
I will be looking forward for it then. Which engine are you running?
@ianwhitt76677 жыл бұрын
A Series 1380. My daughter an I were testing at Donington when we had the problem.
@KristianHergott7 жыл бұрын
"Shit happens". Looking forward for the next video - It is nice to see some good old racing!
@ianwhitt53447 жыл бұрын
See video of practice at Angouleme
@Projectblackkjack7 жыл бұрын
don't you need to pack the front wheel bearings with grease?
@ianwhitt53447 жыл бұрын
You are right we did miss that but did so off camera
@AKn4lf6 жыл бұрын
looking at doing a Miata swap into a 73 Midget. Im concerned with how the rear diff will like that. What if any issues to they have and what should i look at doing about them? thank you for the help hope to see more on this channel in the future.
@ianwhitt53446 жыл бұрын
Now I know that a Miata is known as a MX5 in the UK there should be no issue with the diff. I’ve never had any diff problems but fit competition halfshafts and check the hub bearings. I run a double bearing hub which seems to help stop the leak
@AKn4lf6 жыл бұрын
thank you for the information very excited about this project and just want it to go well.
@ianwhitt53446 жыл бұрын
Good luck Send photos
@AKn4lf6 жыл бұрын
I'll be doing a whole vlog for the project starting hopefully in march-april.