Excellent work Des! I really admire your attention to detail and your perseverance.
@DesAcetek7 ай бұрын
Thank you very much!
@DesAcetek3 ай бұрын
I have hours of video it's just finding the enthusiasm to put another video together. Good luck with your new car.
@David-wy9jl2 жыл бұрын
Enjoying your restoration. Thanks.
@DesAcetek2 жыл бұрын
That's great, there's more to come. Just need to find the time to collate the correct videos as there are hundreds and span years.
@stusoldcars42483 ай бұрын
Enjoying your restoration work after just buying my first gt. Doing a bit myself. Are you doing any more videos?
@anthonygowland83632 жыл бұрын
Great work as usual.
@DesAcetek2 жыл бұрын
I'm glad you find them enjoyable. Next might be cutting the rear of the car off.
@anthonygowland8363 Жыл бұрын
Hi Des, I'm currently in the midst of replacing the chassis legs on min and finding a litany of trouble. Decided to replace the boot floor as it patched rusted and seems to be a main component of the rear structure. Good to see the floor welds directly to the valance but did your chsis legs meet the valance? Mine are an inch short of meeting valance. I think it's right but it would be goodto hear yours is similar?
@DesAcetek Жыл бұрын
My chassis legs did reach the rear valance, when you took the old legs off you should have needed to drill the valance off at the end of the legs. I may have some footage if you need. Actually on second thoughts the rear valance when I got the car was a complete cover up so I don't think it was attached but still think it needs to be. When measuring up I used the bumper irons in the original rear valance to set height, angel and distance. Once the legs were on I took the original rear valance off to replace the whole rear section of car.
@anthonygowland8363 Жыл бұрын
@DesAcetek thanks Des... no the legs fall short of the valance. They must have the valance in the wrong place. I'll have to remove that too and seeing I can work out what they've done.
@DesAcetek Жыл бұрын
@@anthonygowland8363 at least once you've done it it will be right. Enjoy and walk away when you need to.
@anthonygowland8363 Жыл бұрын
@DesAcetek thanks Des... very good advice
@anthonygowland836311 ай бұрын
Hi des.. I got new outer boot floors too.... do the just weld along the top of the chasis leg cover plate?
@DesAcetek11 ай бұрын
I think you are asking, if I welded it to the rear wing. Yes, I popped a few holes through the wing and welded from the outside of the car to the lip of the boot quarter. Hope this answers your question 🙏 Des
@anthonygowland836311 ай бұрын
No... I will weld it to the wing but does it weld to the chasis leg cover plate? Flush to the top of the chasis?
@DesAcetek11 ай бұрын
I'm not with the car at the moment and can't quite remember but will let you know in a couple of days.