MIB STD2 Toolbox installation on Technisat/Preh main unit

[@mrfixpl]

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

[@k20dude41]

I have obd leven and can activate the green menu, do i also need this toolbox sd card to activate android CarPlay?

[@eLFByRoN]

@@k20dude41 which version of OBDeleven do i need to activate the GEM ?

[@sr4pix]

Mr fix… thank you for all you have done for the VAG community.

[@mrfixpl]

Thank you for being here!

[@kaistruempfel8040]

Thanks! Straightforward video, greatinstructions... For a topic like this i would even call it foolproof!

[@3rdBoyMusic]

Mr-fix, you're a life saver. This and other videos of yours helped me unlock my mid2 with 8inch touch screen. I appreciate all your help and to support, I ordered an shirt.

[@thomassarelot880]

Thank you mr-fix ! Worked perfectly on my Seat ! 😁

[@CarlosNeto-d7t]

Successfully installed on my Seat MK3 mib 2 and unlock full link , Thank you so much Mr Fix for sharing all this you re a STAR

[@mohammedqasim9889]

Did u extract the files or just transfer straight to the sd card?

[@pauljames5593]

Thank you all done 10/10 and codes cleared The delete history in the toolbox is required to clear one of the faults

[@Weriwd]

I'm about to install this mod on my car, but the back button on the screen isn't working. As shown here at 2:43 , is there any way to go back or complete the installation without clicking this back button?

[@lorinbeka7945]

Hi there, What else is needed to activate app-connect beside patching the unit with the toolbox. You mentioned one procedure, can you pls describe the steps

[@18otti]

I get into service mode, but I can't get into green mode when I press and hold to select toolbox. You hear a “bing” sound, but you can’t see any more or anything different than before in service mode 4:03

[@matthewjohnston7932]

I have the same thing, anyone know what the issue is?

[@StefThomas.]

@@matthewjohnston7932 developer mode is not active, you need odbeleven to activate it and then you can go to the green menu. i did it with all the help of the videos of mrfix

[@thibaultpotez7327]

Same from my side ! And don’t have the Fec/Swap feature in the primary menu ? Did someone got any feedback ?

[@Furunguelo19]

Necesitais activar el green menu con una app y un obd11,ob2 o vcsd, yo lo hize con un ob2 corriente y la app CarScanner pro,un saludo.

[@joeclegg4440]

It needs to be enabled using an OBD tool such as an OBDeleven or VCDS. In the 5F (multimedia) unit you need to activate it from here. Think it’s called developer mode on VCDS. OBDeleven is around £70, or you could find a local garage which uses VCDS and ask nicely if they could do it. Only takes a minute

[@wiggytoo]

Thanks - great video, for any others out there I was able to enable Developer Mode using Carista Evo. Always a little nerve wracking doing these sort of updates so seeing ti work for real really helps. Mine was 2018 Skoda Octavia Amundsen system.

[@MorhangeC]

Thank you so much Mr Fix for sharing all this, you rock! Successfully installed on my VW Touran 2019 (MST_EU_VW_ZR_P0475T)

[@RobertZborowski]

You can additionally install extended green menu GEM. Just keep the same SD card in the slot and select dedicated option in GEM. You will be surprised how much extra configuration options is added in.

[@mrfixpl]

Thanks! Will definitely look into it!

[@mrfixpl]

exclusively

[@RobertZborowski]

@@mrfixpl 😉

[@mouraddi6445]

@@mrfixpl and mib1 does it work with it ? because i want use another sd card for navigation

[@kittyoreo3870]

Could somebody please give me some advise/help? I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card. I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch). What should I do to make it work? I hope it will be possible.

[@prestige.hub1]

hello, I loaded the necessary files into the USB drive, when I plug it into the car, the USB drive is detected, but after clicking on the menu / software update / update options, I cannot choose the USB option. I need help. My car has the necessary features for Android auto and my car is 2016 model vw jetta.

[@Inigopmb]

Hey @Mr-fix really useful info I have just used it to install in my friends car. Thanks for the videos.

[@lsali2377]

Unable to read the releases information file. Source not available. What should i do??

[@mohammedqasim9889]

Did you find out?

[@upsidedown4155]

Now these are the toys i like 👍🏴󠁧󠁢󠁷󠁬󠁳󠁿🤘

[@mrfixpl]

Me too! Will try to make some cool custom graphics for the unit. Hopefully not brick it 😅

[@mon3104]

so the toolbox can only be installed on units having the navigation button? got VW Polo 2015 6C part number 3Q0035819A (MIB2) and software train MST2_EU_VW_ZR_PO254T. Ive seen videos of people unlocked car play on a unit without nav button (dated years ago) and starting to figure out what information is out there.

[@1krekels]

Hello, I tried to install toolbox, but I got error message: variant error medium. After that many numbers: 1701/1702... to 17220. What is the problem? My train variant is: MST2_EU_VW_P9122D Please help me

[@Artz86]

You're installing the Technisat toolbox on a Delphi system. (D on the end of your firmware is for Delphi).

[@HenkSteenbergen-oj1mm]

Works without any problem, Golf 7 2015. Thanks!

[@ValerioCeniccolaPlus]

Are you sure that 05xx software is not supported now? In repo, requirements: are "Train MST2_XX_XX_XX_X0XXXT, where X=any character (to see the train press and long hold MENU button, then press "Software Update")"

[@antemisetic4544]

Hi @mr-fix I have golf 7 from 2018 and multimedia device is so called "Discover media" with catalog ID number: 3Q0035846B, Hardware: H41, Software: 0472. Current version on unit is: MST2_EU_VW_ZR_P0472T (0472). Can I use toolbox to remove CID lock for SD cards? I´ve tried but I can´t figure is my device MIB STD2 PQ/ZR Technisat/Preh or MIB2 STD Delphi or MIB2 HIGH Harman unit !? I appreciate if you could help me. Tnx in advance

[@yann4482]

Bonjour. J'ai la version mst2_eu_vw_pq_p0472t. Est-il vraiment nécessaire d'utiliser VCDS ou OBDeleven ? Que se passe-t-il si on ne les utilise pas avec toolbox ? Merci beaucoup pour votre aide.

[@bubson1258]

When i hołd the menu button after all stuff nothing happening just some twang

[@oldblackstreet]

Hi, my MIB2 sistem on my seat ibiza 2019 is at the MU versio 0514. When i want to upgrade the button is greyed out, from what i read online my version is not compatible, is there a workaround for this?

[@jamisteven1]

What is OBD11 needed for within this process? think I am missing something here, just trying to get carplay working.

[@eminaydin4867]

I put it on the SD card and it read the card and saw the program but the start location is faded and it does not allow it.😢

[@sinanmsimsek7346]

Thank you Mr Fix.I have bought OBDeleven & activate green menu.Then I have try to install MIB STD' Toolbox via usb & sd card several times but ''START'' button on your video 1.05 do not appear.My car is Jetta with MST2 EU VW PQ P0245T.What should I do .Please help.Thanks in advance

[@robertgmonje]

I have the same problem

[@izhakbaker1602]

@@robertgmonje me too

[@CRTgameplays]

Will this tool remove the component protection also?

[@KlassikMafiaProduction]

please how to install it on the one with no navigation?..

[@serkanozkan9227]

Hello Mr-Fix. I just want to thank you for the great videos and the information you provide. It has been a great help. I had my Octavia for six years and the smart link was disabled from factory. I even considered paying £150 to the dealer to install the codes, if I could find a dealer to do it. Thanks to you I have enabled CarPlay only to find that I have to change the usb socket.

[@yusufkorucu]

Merhaba abi bana yardımcı olur musun

[@ilko5006]

Nasıl yaptınız ben de Passat için yapacağım. Bilgi verebilir misiniz

[@musademirtas89]

Merhaba serkan bey 2016 optimal octaviam var smartlink açmak istiyorum bana yardımcı olabilirmisiniz bilgisayardan anlarım.

[@DavidMIGUEL-z2c]

Bonjour MR FIX, tout a bord merci pour tout ces tutos que vous mettez a disposition. j'ai un souci sur ma VW polo 5 de 2015, j'ai installé la mis a jour dans un premier temps puis installé Toolbox v1.33 pour pouvoir installé le carplay. uns fois tout installé via obdeleven pour les codes fec/swap, mais quand je branche le câble, a l'écran il me mais le message "câble usb non reconnu". Pouvez vous m'aider s'il vous plait.merci

[@mikkell.7828]

Thanks for this great tutorial 🙂 The Skoda Amundsen MIB2 Head unit with part number 5Q0035874 comes in 3 different versions; A, B and C. Do you know if the toolbox software can be installed on all versions? There is a software and hardware version printed on top of them next to part number. Is this the same software referred to as in the installation instructions? Thanks 😊

[@jamesmitchell9201]

Tried this and didn't work unfortunately and it is a tecknisat mib2 unit but no engineering mode comes up at all.

[@Furunguelo19]

@@jamesmitchell9201 debes primero activar green mode desde una app y obd11,vcds o CarScanner pro que fué el que yo utilizé, despues ya puedes actualizar el menú green como lo hace el compañero a través de tarjeta SD.

[@deeppatel9893]

Me fix. I’ve been following all the steps to insta toolbox in my VW Jetta Mib2 std with single SD card slot available. But the it seems like patch is not detecting and can’t start the update. Any tips?

[@weekend_in_swiss]

Czy po zainstalowaniu tego toolboxa będzie już mib2 odblokowany? Mam MIB2 Technisat w Leonie 5F. Chcę mieć spatchowaną jednostkę by móc wpisać kod Swap np na Mirror Link lub Sport Performance monitor. Proszę pomóż mi. Aktualnie przy próbie zapisu kodu swap wszystkie zapisane są nieaktywne czyli jednostka jest załatana. Pomóż Kolego :)

[@mrfixpl]

Proszę kzbin.info/www/bejne/l2rYqIyjd7WWZ7M

[@mousmousful]

Bonjour et merci a toi . J'ai su installer le GEM 4.3 MIBSTD2 MAIS lorsque je vais dans" toolbox" et puis "tools" je n'ai pas de "patch" ???

[@eldorado3000]

Am I right in thinking I don't need any of this specialist VCDS etc to use this and unlock smartlink? I just need an SD card and the correct firmware patch? I can't even get the correct advice from skoda themselves even if I wanted to pay for it

[@philippejaegly5093]

Hi, Thank you for the information - Should I keep the SD card after the installation or could I remove it?

[@buczerbuk79]

Hi Mr Fix. How can I update and install newer green menu ( old one is GEM 3.5 ). I cant install Toolbox cause of this. my unit is Seat mst2 eu zr PO253T. Any idea ??? Thanks for answer :P

[@barossoliver]

Hello! I did everything as described, but the test menu doesn't appear even after pressing 10 sec menu, just beep one. What could I ruin? Everything happens the same as in the video.

[@thesavs6478]

Same thing happened to me?? Any update mate?

[@hardlinerdn3450]

Same Problem here. Please help!

[@thebirima91]

Hi, I have 5Q 0 035 874A. Can toolbox help me with intermittent boot loops when starting the journey? Once it overcomes the boot loop, it’s stable. It takes up to 20 minutes to start operating in my Octavia MK3. Someone has unlocked CarPlay for me but the problem didn’t occur immediately after, so I believe that is unrelated. It has the latest software train. Any advice?

[@VAGdynamics]

I have downloaded the 0.7 File from the description, extracted and removed the cpu file and replaced with the toolbox gem cpu file as my system says its gem 3.5, however it does come up as update for sd card on stereo, just reads and wont let me update. I have fec/swaps option too Let me know if i can fix it i have a 2015 passat gt

[@tizianogigante4556]

Hi, first of all I want to thank you and compliment you on your videos, they are always my salvation! I recently purchased a 2020 Seat Ibiza V with the optional touch screen but without CarPlay/Android Auto (code required message when I try to use Full Link). I saw from your videos that it is possible to activate it by first installing the toolbox but unfortunately, even though I believe my unit is compatible (MST2_EU_SE_ZR_PxxxxT), I cannot install the files that I downloaded from the link in the description of your video. The update is read but the “start” button is grayed out and it cannot be pressed. Is there anything I can do to fix this? Thanks in advance!

[@andreassubczyk9778]

Po zainstalowaniu najnowszego toolboxa chciałem odblokować app conect ale po naciśnięciu patcha swap el... nic się nie dzieje program tak jak by się zaciął

[@Olli991]

1556 error should not be present with installation of latest version. It was a fileversion inconsitency with old installtion. It is fixable tho. 1555 or SVM Error is also fixable with XOR claculator and some diagnostic software. Good explanation and that you listed everything and not want to stell this toolbox :-) BTW: If you run the build in update script from the menu your old menu entry should be deleted ;-)

[@mrfixpl]

Will make a video about 1556 which I have in my unit since some time. It's triggering my OCD every time I scan the car. For the 1555 I've made this tool: mib-helper.com/im-so-xory/ Keep up the good work!

[@Opryskus]

@@mrfixpl Zrobiłeś już film o 1556? Czy to chodzi o toolbox i "Clean SWDL history and keep only non-duplicated FW updates"

[@vojtechdanihelka2883]

Hello when i make update via sd my update button is gayed out. Do you know where is problem please??? I dont have cpu and other listed there

[@aryangajjar3808]

Hi, need help please. I installed tool box and I was activating the CarPlay following you very useful video on golf mk7 it did not work. I can’t now install any firmware updates was wondering if you can show me how to uninstall it so I can try again

[@callmemattmoo]

cześć Pan-Fix, dzięki twoimi tutorialami. Ok, so I have Passat B8 2017 Kombi with Discover Media Navigation and I'm wanting to do some updates. I put some files on a 32Gb usb-stick formatted as FAT32 and when I insert it in the USB port in the centre console nothing happens, on the headunit it doesn't let me choose the USB, so is something wrong with that? Thing is I don't have SD-Card reader in my laptop so that's why I wanted to use USB. The other thing is I can't remove my USB port to check if it's got hardware key for carplay/android auto (green plug or purple plug). I want to activate a few things like App-Connect, voice command in steering wheel, video-in-motion without having to buy OBDEleven.

[@tweakis]

Please help MIB2 discover media won't take any updates including the toolbox they show on the SD card but after 1st reboot it gets stuck ?

[@jeffreykee7923]

Dear Mr. Fix, i tried to do a patch for the Navi SD card. everytime it says 'backup failed' and than patch not installed.

[@mrfixpl]

Please open a ticket on the code repository with details about your unit.

[@antoninocampo8600]

Is the operation completely safe? There are no contraindications? Does it also work with Discover Pro/Media - MIB/MIB2 High? Thank you very much!!

[@Jedi_Masteren]

This toolbox, does that support install on "Discover Media Gen 2" on Volkswagen? I have already install the green developer menu through OBD Eleven. And does the SD card have to be formatted as fat32 or ext fat?

[@dddd98443]

How long does it take to download, because every time I try then I can’t find "patch mirrorlink"

[@kittyoreo3870]

Could somebody please give me some advise/help? I have the mst2_eu_vw_zr_P0137T installed, but want to be able to install Toolbox so that I can use a map on a custom SD card. I tried to install Toolbox without firmware update with the solution to replace the cpu folder from GEM folder with the one in the root of the SD card so that the root CPU folder is replaced with the GEM folder version. After 10 attempts it keeps saying: start electric test. Mainunit/version compare. Accept this error code leads to restart(translated from Dutch). What should I do to make it work? I hope it will be possible.

[@raqizio9832]

Hello, nice work btw but i have another question, is there any support for the ones without the navigation? With only 1 SD card slot.

[@mk-pl-spl4712]

Bonjour suite à la mise jour et l'activation de menu vert Lors de patch j'ai un petit problème

[@rodrigomendez-kerr3364]

I got an error when accessing to the green menu, it says: error in screen rederer, and below some Java.lang etc, do you know how I can fix it? Thanks in advance.

[@doctorx8467]

@mr-fix i have discover media (2 sd slots on unit itself), current firmware train is mst2_eu_vw_pq_p0245t, on mib solution, newest is MST2_EU_VW_PQ_R0604T, can i just go to that firmware? then install toolbox? or must i usea P0, and noty a R0 firmware? kindest regards

[@garethwynn01]

The instructions mention a different procedure for certain versions of the green engineering menu. Does that mean you first need to activate the green engineering menu before you do this? Watching the other video that uses OBDEleven which I don't have. Just checking to see if I need that first.

[@RubiksProBro]

did u find an answer? i downloaded this and still no toolbox after holding menu for long

[@garethwynn01]

@@RubiksProBro you need an obd device like obdeleven to activate the green menu.

[@reparadom83]

salut, merci beaucoup pour ta vidéo, j'ai malheureusement un problème. Quand j'essaie de faire un " CP OFF ", cela ne marche pas. J'ai le message d'erreur : " Unknown file size 1921791 detected. " Comment faire ?? Merci d'avance

[@NimeniNimicBro]

I have the version MST2_EU_VW_ZR_P0241T with the software H25.14.25_STD2Nav_EU. Cam I update with the toolbox v1.3.3.zip? Also, should I replace /cpu folder? Anything else to do? Thank you!

[@Francesco_Taormina]

hi i followed all the steps but when i hold down “menu” no gem comes out. how can i solve?

[@sonihemish]

@mr-fix I am getting cpu NOK now ... on the screen ... with onlineservice NOK when i click on it ? also the unit is not booting to anything now ... can you please help

[@balazsszinicz3793]

Hello. Could you help me MST2_Eu_VW_ZR_P0241T installation does not want to go in the green menu? Thanks

[@anthonyc5858]

Followed the instructions, but holding the menu button doesnt show the test mode I hsve the mst2_eu_vw_zr_p0468t With std2nav_eu

[@woonicon3741]

Still works perfect in 2024

[@Zoltennn]

The green menu will not start after installation. What could be the problem?I have 3QOO35846A MST2_EU_ZR_PO363T

[@dominique1789]

Hello, is there a toolbox version for my Skoda? My current version is MST2_EU_SK_ZR_P0241T and the software version is H25.14.35_STD2NAV_EU

[@eduardomateus46]

Ola meu amigo, sou do Brazil, baixei, acessei mas não a tela verde pra desabilitar o CP protect pode me ajudar?

[@RohanToesiKraai]

I have a 2020 vw t-cross with installed SW MU version 0475. So I believe this method won't work then?

[@thekosabic4750]

Hello Mr-Fix, I installed the toolbox successfully! But using it cause a fault! Example: the SD card SID lock removal... Following the steps I got a message like "... the task/servce is already running ..".I used already the GEM workaround - without success ... :-(. Do you have an idea? Thanks in advance...

[@cristian7477]

could you fix it? I have version 1.3.3 and disabling CID and CP has no effect, when I try again I see lines of code with errors.

[@frank2metros]

from the USB doesn't work right? I had an error and the toolbox was not installed.

[@ivailoivanov6410]

i replace the \cpu folder with the one from \toolbox\gem\cpu. , but GEM is still 3.4 version ?

[@DavidMIGUEL-z2c]

Bonjour MR FIX, tout a bord merci pour tout les tutoS que vous mettez a disposition. J'ai un soucis sur la polo 5 - 2015, j' ai installé toolbox v1.33, ainsi que les codes Fecs via OBDeleven pour avoir le carplay.tout a fonctionner comme votre video mais quand je connect le cable

[@half96]

Hi, someone can help me pls? When i put the sd card in the Car, says: “unable to read the release information file. error when reading/opening the files.” What am i doing wrong?

[@antonioemme4263]

Hi, can you help me? I've a Seat Arona of the 2019. I've got only one sd card slot. Thank you

[@lukegoodfellow6321]

Currently running MST2_EU_VW_ZR_P0241T, can't seem to find an updated version with the link to the downloads. Which version do i need next? TIA

[@mrfixpl]

Check mibsolution.one in the MQB_Solution folder

[@lukegoodfellow6321]

Thank you! Managed to find it late last night clicking through various folders :)

[@nicon963852]

Hi i have 1 Slot version Bolero MiB2 Technisat with 5Q0035840B h30. It is posible to do it with USB2HSD cable or not. Is there any way to enabled telnet access? Thank you

[@tiabowling578]

I can’t press back and now my screen is stuck. How can i fix this. I have OBDeleven

[@julienonizuka]

I try with near same version (seat not vw) and i can’t launch update. Do you know why ?

[@stas12369]

Can i install the toolbox on VW Sharan 2019? SW Train MST2_EU_VW_PQ_P0475T and NAV H29.319.76_STD2NavPQ_EU I wont the Apple Car on my car. TY

[@jacekbond5380]

U mnie brak cpu /y i nie jest podswietlony napis rozpocznij, co za lipa moze być?

[@ClaudiuGabriel-we1xt]

I followed the steps but i can’t press start for update( it’s a unit with one card slot) What is happeing?

[@VALOHUNTER8417]

same for me

[@aymenkadid7105]

Did you find solution please

[@ClaudiuGabriel-we1xt]

@@aymenkadid7105 No

[@SanuMiah26]

Hi any help my compass in my mk3 seat leon says compass currently not available what could this be due to would appreciate a reply thanks

[@eatcleandietdebrecen7806]

Hi, i have Skoda Superb 2014. This firmware is working my system? How can i download the newest firmware? Can you help me?

[@Erki36]

How do get GEM 4.11? I have Toolbox v4.2A but GEM 3.4. Or is it possible to activate Apple carplay with GEM 3.4 via MQB Coding?

[@laolalock909]

good content. Thank you!

[@mrfixpl]

Welcome!

[@johnm-s480]

Is it essential to get a diagnostics tool or can I do it with just toolbox and SD card? MIB2 Standard

[@krzysztofstachura5159]

hey!mógłbyś pokazać jak zastapic folder cpu folderem toolbox przy wersji gem 3.5wiem ze to pewnie banalne ale niechcialbym czegoś uwalić.? z góry dziękuję.Pozdrawiam

[@christophkulla5206]

Hallo weißt du mittlerweile wie man den CPU Ordner ersetzt?

[@claragustarimac9742]

Hi, I have this version MEN2_EU_VWGPx_P0180L can I install the std2 mib to finally unlock the car play ?

[@jenscyber5427]

Hello. I have a passat 2015 b8 with only mirror link (wich needs to be activated btw) but CAN I ADD apple Carplay on my car and activate it? Or does my car not support that

[@robertokrumm3659]

I can’t installed, the start button is not able. Can you help me ?

[@GGiannis]

Is there any guide for MST2_EU_SE_ZR_P0514T - 5f0 035 874a ? Probably needs emmc to usb as I can understand.

[@remusrws]

Hi Mr-fix, I followed every step and at the end I can't access the green menu, it doesn't work. What can I do to make it work? Vw passat (MST2_EU_VW_ZR_P0367T). Thank you very much! 🙏

[@romaina9286]

hi do you fix that ? i have the same problem

[@Raplinemusik]

Bonjour bonsoir Mr-fix, j'ai une question pour lui si vous pouvez m'aider, je voulais vous demander quelle version de toolbox je peux utiliser avec mon MST2_EU_VW_PO619D[SW MU 0743] 3Q0035864B, un grand merci d'avance. Je serais très heureux de recevoir une réponse de votre part (rapline)

[@matthiasjurgensen8077]

Hi mr fix, thank u! Do you have a way for delphi too? Thx

Is it possible to provide instruction for installation of MIB STD2 Toolbox for units without Navi and with only one 1 SD Card?

[@jellevl]

Would like this one to

[@t7ank]

Is it correct this method wont work on 5F0035877A and MST2_EU_SE_ZR_P0514T ?

[@andreassubczyk9778]

Mam pytanie,czy masz może film co konkretnie trzeba ściągnąć z internetu i co wgrać na kartę SD aby zainstalować toolboxa.Z góry dziękuję za wszelkie informacje