Installing WHIPS from the LED Online store on the Kawasaki KRX 1000. This is a easy install. Please consider subscribing, especially if this video helps. Thanks for watching!!
Пікірлер: 50
@marykrehn424 Жыл бұрын
Excellent video! Clear as a bell. Thank you. After looking through this thread, I realized that if you remove the tape from the auxillary wiring, pigtail emerge, so you can just wire directly.
@RVAmerica3 жыл бұрын
Thanks for sharing the installation! The flag whips and lights look great! Danny and Lynn
@johnorengo81493 жыл бұрын
I do everything in my yard or driveway also...no garage here, ha! Love the pretty days that allow me to play with my toys.
@MichaelDavisOutdoorAdventures3 жыл бұрын
I guess i'm not the only poor man out there, lol.
@clintphillips78952 жыл бұрын
I absolutely enjoy the realness of this video. You definitely have won yourself a subscriber through me. Keep on bringing the content and I look forward to watching your upcoming videos... Especially the 35s
@MichaelDavisOutdoorAdventures2 жыл бұрын
Thank you so much. That really means alot to me.
@vance43192 жыл бұрын
The only place I've been able to find that shows those 12v connectors in the rear on KRX. I put a 2 way splitter (built my own bullet type connector splitter) on the neg. and pos. and am running whip and license plate light. New subscriber too. Thanks for going all the way and not assuming!
@toddrose14183 жыл бұрын
Thanks for the install video. I'll probably be getting some lights for my KRX.
@MichaelDavisOutdoorAdventures3 жыл бұрын
We love how they look, especially when you are night riding
@ryanwaggoner81243 жыл бұрын
You video was very useful, but I just installed these exact whips on my krx, where you plugged into the accessory line, if you actually unravel some of the electrical tape on the wiring harness at that location it exposes pig tail ends you can wire directly to without needed those plugs.
@MichaelDavisOutdoorAdventures3 жыл бұрын
Wow, that's very good to know. Ill have to look at mine. Thanks for the tip!
@toddburnette84173 жыл бұрын
When you disconnect the wires under the fender what do you do with the other lose ends? What else does it go to ?
@jasoncav2139 Жыл бұрын
Those WHIPS look WHIP ! 😛 SERIOUSLY VERY COOL and next on my list !
@mainlyoctober3 жыл бұрын
Great video brother! Installed some myself!
@MichaelDavisOutdoorAdventures3 жыл бұрын
Right on!
@acamp54683 жыл бұрын
You got a nice ride there sir
@MichaelDavisOutdoorAdventures3 жыл бұрын
Thank you!!
@Podchynok9 ай бұрын
I’m more than sure if you get paperwork together and let your friends know, couple cases of beer, some burgers and the garage done. There lots of men around us to help
@Tonnsfabrication Жыл бұрын
The male ends left in the harness should be removed and used to wire into your lights, they should just have a roll of tape holding them in place until you're ready to hook them up. If you use a cover over your machine the removable whips are a must.
@ronaldhill35852 жыл бұрын
How are your whip lights working now ,after you have had them for a while now?
@smokeyiztactical2 жыл бұрын
How are they holding up I got them this year
@dscleaning6882 Жыл бұрын
What size bullet connectors did you use?
@iRIDE2793 жыл бұрын
Super easy install looks like. But I am more interested in the chase lights you have on the roll bar. Size and source if you could please.
@MichaelDavisOutdoorAdventures3 жыл бұрын
They are actually the factory ones from Kawasaki. They are on a toggle and go from green to regular lights
@thomascornelius5102 жыл бұрын
Yeah I have a 10 by 12 shed I keep my rig in so I have to back it out to work on it. Kinda sucks because my last home had a 24 by 24 garage. But that's life. Lol. Can you make the lights go up and down the stick's ? I just installed a 340 dollar set of 4 foot whips and I don't think I'm getting the full experience out of them. 4 foot xk glow. Is was they are
@whiterhinooutdoors45723 жыл бұрын
Send me the link for those those are awesome look great
@vegadealer Жыл бұрын
How are thoe whips holding up over the years?
@kennethnevels42373 жыл бұрын
Do you connect both whips wires to the connectors or is there on on the passenger side also ?
@MichaelDavisOutdoorAdventures3 жыл бұрын
The whips only have one connection for both wires. It feeds both sides, if that makes sense
@markleonard5604 Жыл бұрын
What size bullet connectors did you use to match the factory female plugs?
@MichaelDavisOutdoorAdventures Жыл бұрын
To be honest I don't know the size. I know they are the same size as lights on a tractor trailer and you can find them in truck stops. You can buy a cheap light and cut the parts off that you need
@BigBadJohnDieselАй бұрын
Great video! What did you unplug, in order to plug in your whips?
@MichaelDavisOutdoorAdventuresАй бұрын
I can't find anything that I unplugged. I wondered the same thing
@cookiescrib38542 жыл бұрын
I just bought some whips for my KRX. What is it you’re unhooking in order to hook up your whips? And what’s left unhooked what can it be used for later.
@MichaelDavisOutdoorAdventures2 жыл бұрын
As far as I know it's a auxiliary wire for items such as whips. You just unplug them, don't have to cut any wires or anything
@cookiescrib38542 жыл бұрын
@@MichaelDavisOutdoorAdventures thank you
@cookiescrib38542 жыл бұрын
@@MichaelDavisOutdoorAdventures If you don’t mind one more question lol what size plug was used? I’m going tomorrow to get mine so I can do the same hook up.
@michaelybarra86743 жыл бұрын
Is that acc plug always hot or is a key on acc plug?
@MichaelDavisOutdoorAdventures3 жыл бұрын
It's a acc. Its hot with the key switch on
@waynecox81273 жыл бұрын
is the krx prewired for whips?
@MichaelDavisOutdoorAdventures3 жыл бұрын
Yes. In the video I show you where the plug is
@tomnutt60222 жыл бұрын
Dude, can't do without a garage. You from TN? You buy the beer we'll build it in 2 days
@helmssxs83013 жыл бұрын
Where did you get the connectors and what are they called and size?
@MichaelDavisOutdoorAdventures3 жыл бұрын
I actually picked up a light at a truck stop with those ends on them. Then cut them off. They have a Butt Connector style plug but I used those wires with the ends because they are sealed better. As far as size, they are a very common size but I don't know the proper size name
@reneecampbell61793 жыл бұрын
@@MichaelDavisOutdoorAdventures what are the plugs called that you plugged into the harness called (behind taillight)or is that what you are talking about above?
@MichaelDavisOutdoorAdventures3 жыл бұрын
Let me research and I'll get back with you. I can cut some off of an old light and mail them to you, if you want. Just email me your address skinnyga@yahoo.com
@chrissparrow6573 Жыл бұрын
We're did u get ur tailgate
@MichaelDavisOutdoorAdventures Жыл бұрын
It's the kawasaki one
@TrinityRenewalSystems3 жыл бұрын
Factory mounts are very weak..
@MichaelDavisOutdoorAdventures3 жыл бұрын
I found that out. Lol. But I added spring bases and it works out great now