Abandoned Honda 400EX saved after sitting for DECADES in pieces

Abandoned Honda 400EX saved after sitting for DECADES in pieces
#4stroke #honda #restoration
Hey guys, this is a 1999 Honda 400EX that I bought for 500 bucks. It was torn down and left in a barn for decades. The history is unknown, it was bought in an estate sale along with multiple other machines. I put a ton of time into this design, build and production but it was definitely worth it! Consider subscribing for more content like this!
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Shock Reservoir Clamps - ebay.us/3sZ8zK
Parts Washer - amzn.to/30YXHXL
Skid Plates - ebay.us/q7hCin
Stage 3 Hotcam Kit With KB Valves - ebay.us/8ZRDRY
HD Cylinder Studs - ebay.us/RSvDo9
426 Kit - ebay.us/KPkTqU
426 Kit w/ Cam - ebay.us/nBRTTb
Ported Head - ebay.us/zKdQuC
Kibble White Valves - ebay.us/78o0lm
HD Timing Chain - ebay.us/EqFTtS
Clutch Cable - bit.ly/3DZqKbA
Throttle Cable - bit.ly/3FNz3Ic
HMF Exhaust - bit.ly/3HWbJK2
Tusk Competition Clutch - bit.ly/2ZuC4xC
SS Bolt Kit - amzn.to/3xvCOPt
Replica Carb - zoomzoomparts....
Red Carb Lines - bit.ly/3xrIkT8
Battery - bit.ly/3CVOUCw
All OEM Parts - bit.ly/3CRneyF
ASV F4 Levers - bit.ly/3rhccka
AC Bumper - ebay.us/J7U5qP
Graphics - aggressiveoffr...
Clutch Holding Tool - bit.ly/3CVzoqr
Milwaukee Small Impact - amzn.to/3leVi1X
Milwaukee Large Impact - amzn.to/3rbXvPm
Anti-Seize - bit.ly/3cTDp4c
Assembly Lube - bit.ly/3lc9Z5G
Red Loctite - bit.ly/3r7Upfk
Blue Loctite - bit.ly/3lcsUx8
Benol - bit.ly/3G6ZwAP
Torque Wrench - bit.ly/3nVzoT9
OEM Style Intake Boot - amzn.to/3FSbxcW
Pro Taper Bars (ATV Mid Bend) - bit.ly/3FPU5WK
ITP Rear Tires - bit.ly/312BKGY
ITP Front Tires - bit.ly/3xrHbLk
Swingarm Rebuild Kit - bit.ly/3p0Wmrm
Billet Carrier - bit.ly/3rslni3
Pro Linkage - Contact @3rdaxis01 on Instagram
Anti-Fade - bit.ly/3pagt6y
Extended Axle - bit.ly/3nXjV54
Billet Gas Cap - bit.ly/3CVvcXQ
DRW Case Saver - bit.ly/3CXDpuz
SPONSORS/COMPANIES I TRUST
BP Racing - bpracingatv.com/
Rocky Mountain ATV MC - bit.ly/3AkRaSS
DRW Performance - drwperformance...
AP3 Racing - ap3racing.com/
Lion Parts - bit.ly/3jtEGSr
Rocket Ron - rocketronracin...
MERCH - michael-sabo.c...
If you enjoyed, please comment, like, share and subscribe!
Add me on Instagram @michaelsabo350 for Channel Updates!
Thank you for watching!
Save money with my Discount Codes!
bpracingatv.com use code SABO10 for 10% off
DRWPerformanceATV.com use code SABO10 for 10% off
AggressiveOffroad.com use code SABO15 for 15% off
FullFlightRacing.com use code SABO for free SS Brake Lines when you order a arms
AP3Racing.com use code SABO20 for 20% off
Equipment I use!
Wireless Mic - amzn.to/2VeEATV
Tripod - amzn.to/2T4ZHW7
Tripod Phone Mount - amzn.to/37OzFfh
Phone Gimble - amzn.to/2vWDTnG
GoPro Hero 7 Black - amzn.to/2HQMMSp
Video Editing - amzn.to/39Ug66z
Thumbnail Editing - amzn.to/2HJuanv
Companies and Sponsors please contact: [e-mail]
I own the license to use any and all music in this video.

[@MichaelSabo]

You can win this 426EX! Visit my Instagram @michaelsabo350 or email [e-mail] for details! 🤘 You guys rock and thank you for 80K subscribers!

[@6ohslow0]

Can I have that swing arm after you get the new one 🤞

[@MichaelSabo]

@@6ohslow0 lol sorry man, it's going with the quad to whoever wins it 🤘

[@dalynskinner937]

Do a 300ex next!!!

[@kalegillis5161]

I loved watching this video... What do you prefer a 400ex or a 660 raptor?

[@MichaelSabo]

@@kalegillis5161 thanks for watching! That's a tough one; the 660 was one of my favorite quads of all time when I was younger. I think I'd go with a well built 400ex because they handle much better and they're nimble, but raptors have so much torque they're so much fun; it's a toss up depending on the mood I'd say.

[@polishoskar2039]

Who needs Netflix when sabo gives you a hour of awesome content 🔥

[@MichaelSabo]

Thank you bro 🤘

[@timothyweathers2148]

Exactly

[@immelting9834]

I know right . It's like an actual TV show.

[@chrisdavey6219]

Totally agree bro!

[@stoney1816]

Literally haven’t watched Netflix in a whole week and a half bcz of these videos 🤣😂

[@rubenechezabal6397]

Really like the fact that you started to put the intros back in the videos. I know it's a lot more work bro... but man are they hilarious!!!

[@MichaelSabo]

Haha, glad you like them man 🤘

[@arnou.1120]

I just say… „my strange addiction“! 🤣 Man, that was great! Maybe you should re-publish that one!?

[@rubenechezabal6397]

Also the quad came out bad ass bro...4 real!!!

[@PeteHager]

👏👏 Now that was awesome to watch! Love seeing all the original parts restored and brought back to life. Choosing between the KFX and the 426 is gonna be tough lol I can’t wait to see the Harley build! 🤘 best wishes for a speedy recovery on your shoulder 🙏

[@MichaelSabo]

Thank you brotha! Sadly, I've decided the 426 will be a give away 😔

[@PeteHager]

@@MichaelSabo I think KFX’s are super fun to ride so you really can’t go wrong with either! Whoever gets the EX is getting a badass machine! 👌

[@KilroyMotorSports]

@@PeteHager that’s true i would probably keep the kfx i love the green on it and rossier pipe cant go wrong with rossier 😅

[@creekfishermenoutdoors936]

@@PeteHager uiiououuuu

[@powerpit48]

There is nothing better that I enjoy then to watching an old one brought back to life. You make it look easy, but I know it isn’t. Great video with a lot of information.

[@gavinbarham542]

The 400EX is the most dependable quad I have ever owned. Bought one new in 2000, I still have it basically all original even down to the brake pads. Air filters oil changes and batteries is the only thing I have ever done to it. It is not my favorite quad, but if you want to go for a ride and not risk breaking down it's my best choice.

[@andrewstahl6916]

You still have the original brake pads on it from 2000? You must not have rode it more than once every year since you bought it

[@gavinbarham542]

@@andrewstahl6916 at that point in time it was the first new sport quad released in over a decade. Soon thereafter there were many better choices. Until recently there used value was almost nothing, so there was no point in parting with a clean low hour machine.

[@MichaelSabo]

Very accurate; the reliability factor is 10/10 on the 400ex

[@andreyangere3076]

A Yamaha warrior runs without any oil 🤣

[@hibrimic]

Just switched out the factory brake pads on my 2000 400ex last summer. I've owned it since new. Still looks brand new. Dont ride all that often but no way I can part with it.

[@SketchyXC]

I had torn rotator cuff, the recover and physical therapy were torture mentally for me. But in the end im much stronger and healthier physically and mentally. Dont let yourself get down during recovery! Another awesome build on the 400! 🤘

[@MichaelSabo]

Thank you bro, it's good to hear success stories; I'll come back 110%!

[@11GalleryATV]

Awesome video sir! Glad to know that I'm not the only one that misses components and has to go back and take stuff apart again and again! Once, I was actually putting together an aftermarket 400ex clutch basket, and had everything correct, and then while explaining it in the the video, I flipped the plate and secured it on backwards. I didn't even notice it until I was editing the video and had to pull the whole clutch side back apart and do it all over again!

[@MichaelSabo]

Dude!! I've done that too lol; I had to split the bottom end of the KFX and put in a washer for the transmission; watching my own video saved my ass 😂 I appreciate the kind words man!

[@ryper4284]

“i’m not gunna do a full rebuild…” meanwhile does a full rebuild😅 no hate, love it man

[@knick1975]

Michael you done an amazing job on that quad that's been sitting for that long. Love your passion for doing rebuilds. I wish I had your knowledge and skills. Would love to have that quad knowing it was built by you. I hope your surgery goes well and recovery goes quickly for you keep up the awesome work.

[@MichaelSabo]

Thank you for the kind words and support Knick1975!

[@MichaelSabo]

Hey guys, this is a 1999 Honda 400EX that I bought for 500 bucks. It was torn down and left in a barn for decades. The history is unknown, it was bought in an estate sale along with multiple other machines. I put a ton of time into this design, build and production but it was definitely worth it! Consider subscribing for more content like this!

[@SALTERS9577]

Looks epic good work.

[@MichaelSabo]

@@SALTERS9577 thank you man!

[@user-lx1zg2qo3c]

Graphics looks perfect

[@madedeep]

looks good man i love it i have a 2003 400ex sitting behind my shed with all the parts to fix it but i been slacking since i picked up a 2021 yfz450r so i guess you gave me some motivation to fix my 400ex keep up the content from one bucks co guy to another =)

[@BostonBanshee]

Mike you need to keep this !!!

[@s2krexx]

Dude I never watch an hour of anything on you tube but I sat thru the hole thing and diddnt even notice, videos are coming out great and builds are awesome. I like the fact that it all gets done in one sitting. Keep em coming 👍🏼👍🏼

[@MichaelSabo]

Awesome comment and thank you for the feedback on my longer videos!

[@doug_errickson]

Loved it Sabo! These videos are so fun to watch, I love seeing your builds come to life! Tips, tricks and gadget tools, it's always cool to see how you troubleshoot, refinish and rebuild. 400ex was an awesome build, ive owned several, she's a beauty! Ps, the new logo may be best suited w the MS in black and the Michael Sabo in white (opposite). None the less, I dig! Peace brother!!

[@MichaelSabo]

Thank you for the love Doug; I'm glad you enjoy the videos and thank you for the feedback on my logo too 🤘

[@IvarEriksson83]

Micheal you have slowly become one of my favorite content creators. I recently had my hip replaced and your content has made bedrest fly by. It's refreshing to see a young man using his hands and brain. My kids love seeing these projects and I hope when I'm back on my feet I can do a project build with my kids.

[@troyhayes3461]

Detailing metal surfaces that had years of dirt and rust buildup is unbelievably satisfying.

[@remady5827]

I can tell that you put a lot of effort into your builds and you take pride in your work, I really love how the swingarm turned out really nice orange red!

[@MichaelSabo]

Thank you man; I was really happy with the swingarm too 🤘

[@ralphvasso7209]

You don’t give yourself enough credit you’re one hell of a builder. Beautiful quad mike

[@smokeyou812]

Great build. Plus I appreciate you keeping parts still good. As a penny pincher it drives me nuts when people replace a bunch of good parts just cuz they can afford or for bragging rights so I applaud you.

[@JoshJackson13]

This is the first build video of yours I've watched and I must say you are a good atv mechanic.

[@shanefarmer7193]

Now you have the coolest 400ex and the coolest 250r. Great job mike!!

[@MichaelSabo]

Thank you Shane!

[@wescos25]

Last 2 builds started up first hit. You are for sure taking the time and covering all bases. Great job!!!!

[@ryandeweese363]

Another Excellent build!! Your attention to detail and not cutting corners really shows your passion for a good running machine, and turning out quality!! Very good!! Glad I found your channel

[@local631]

You Rock Brother, saved another one from the landfill and didn't just get her running but did her proud, I was a 2 stroker kid, went from CR 480 Elsinore and although everyone had trikes at the time 1986 I Got one of the first 1986 Honda TRX 250R 4-wheeler 2-stroker the things I did with that quad were amazing..keep up the good work, and hope You are feeling better....

[@ryy597]

The fcr 37mm or a 04-05 450r carb would've been a great upgrade over the stock carb. A must in my opinion. Either way the build turned out great!

[@johnbruzzi4381]

I got a 04/05 carb Mike if your interested

[@mxdirtboyz4225]

@@johnbruzzi4381 info how is it

[@johnbruzzi4381]

@@mxdirtboyz4225 you are interested in the carb. It's in perfect condition

[@mxdirtboyz4225]

@@johnbruzzi4381 Yeah I am what are looking to get for it.

[@johnbruzzi4381]

@@mxdirtboyz4225 idk make a offer where are located?

[@ryanclarke5128]

Awsome build. Rebuilding my buddies 400 was a great time so awsome to see. Now I gotta pull my raptor apart and see what’s wrong with it. Just rebuild the whole machine after buying it for 500 and the starter went out.

[@858415]

Awesome job restoring this legend. You're doing Gods work saving sport quads.

[@whatawhatwhat9298]

Our generation is notorious for torn rotator cuffs. Had my surgery last year I give you props on riding like that cuz it's seriously some shlty pain.

[@marcmuke6378]

Man I'm newer to the channel and just wanted to say that you are really knowledgeable about working on engines

[@MichaelSabo]

Thank you for subscribing and for the kind words Marc!

[@petemartus8876]

Mike for some reason I thought that you were to clean and prepy to be a mechanic.so... this is a couple years later, I decided to give you a nother chance and I was truly impressed. You did a awesome 👌 JOB

[@bryankerr69]

Nice build. I would have put some lighting on it with it being a trail machine. I'd keep it. Love the 400EX. I have a 2007. Will never sell it. Thanks for sharing.

[@MichaelSabo]

Glad you liked the build Bryan; a light is definitely in order!

[@dhan7072]

Dude I literally have a 99 400 ex in my barn that I traded yard work for when I was operating a lawn care business. You have inspired me to drag it out and begin the restoration process. Thanks for this video!!

[@BigDirtDawg]

I’m doing a 2002 300ex right now. Do it you won’t regret it. Honda made some beautiful machines in the 90’s and early 2000’s

[@dhan7072]

Ahh the 300 ex! I had a 90 something model when I was a younger man. Had a blast on it for years!

[@maxm17]

Love the vids,how complete they are and how much care/work goes into it. I think I liked the red and black look the most.

[@imhooks]

I don't ride. I don't build. I still seem to find myself loving every one of these videos.

[@JP50122]

Great job and great video, Mike! I love the single episode builds. You put a lot of love and soul into that quad and whomever gets it next will be one lucky dude. Keep up the awesome work. You not only have incredible machine building talent, but you’ve also learned to rock the video production and editing side of things as well. Wishing you a speedy recovery with your shoulder!

[@darrellfolk5284]

Iv paused the video around the starter and drilling hole part to say something.... You do Fantastic work and attention to detail Thank you Mike for another Great Video. Iv got a 83 ATC250r that I need to get running. You are Motivating me to get this 6 year project started. I'm not as Mechnicly inclined as you and actually have a fear of tearing something apart and knowing if I'll get it back together. It's a real Fear. I also can't stop watching your videos from little Saraha!! You the Man Mike!

[@shaun88R]

Great work as always. How you fixed the frame and stem was pretty neat. And that swing arm came out next level clean!! 🤩👏

[@MichaelSabo]

Thank you as always shaun! The only thing that would make it better is a ShaunMX Thumb Throttle

[@MnWarrior350]

Great build Man! I wish I had the patience to film and edit like yours. I'm almost in the home stretch on my current rebuild and wish I could document it as well as you. Good luck on the Surgery and Rehab!

[@DirtyBob200X]

That turned out really nice. Those ASV levers are, in my opinion, are a work of art. I actually run a set on my '85 ATC 200X.

[@bhoss7133]

Another beautiful build Mike! 👌🏾 Best wishes on a fast recovery from your shoulder surgery. And respect to you for not ragging on law enforcement for doing their job 👍🏻 Keep it up (please!). Def 1 of my favorite channels.

[@WeRunBrushless]

I’m not worried about reusing the clutch disks, I’m more worried about rubbing anti seize on your bare hands!! ARE YOU A MAD MAN?!?

[@amcmann925]

Love the builds. Your the only channel I will watch videos that are an hour long or longer.

[@danw9946]

I love the first bit where he sees the thumb throttle and puts the bike back lol.

[@MichaelSabo]

Anti theft device 😂

[@tyler238]

Damn Mike u killed that build bro! I swear you’re the king of cleaning parts and making em look brand new! Lol I’d be interested in buying it, how do I contact you?

[@jimmy1life]

No me lol

[@MichaelSabo]

I appreciate that man. I am undecided what I will do with it; I'd like to do a give away with it but you can shoot me an email at [e-mail]

[@tyler238]

@@MichaelSabo awesome 👍🏾

[@thatoneguy2756]

I use roll rubber roofing, cut a 1 inch wide strip and glue it to skid plate where it meets frame. Nice and quiet.

[@1991enduro]

Me too

[@DeerHunter13]

I just got one of these, I'm really happy because now I can keep up with my friends while riding

[@Metalvox88]

KZbin recommended this video, makes me miss my 400ex so bad. I traded a zero turn for it, was told it was bored over, jet kit, upgraded piston, etc. He said it was a “440ex” not sure if that’s a thing but it was stupid fast, speedometer app I had on my phone clocked it at 79mph before letting off halfway thru 5th gear. It was such a beast! Awesome and very detailed video, definitely had to subscribe!

[@colesmountainbiking]

Just got my 400ex started for the first time since November last year yesterday, other than some valve ticking it works great

[@notimeforthat999]

this is honestly my favorite series i could watch these builds all day 😂

[@jasonbakewell6831]

I could watch these type of videos all day 👍🏻

[@RB-bl1sv]

I just watched your build on this and the 700. I'm 64and never had one but your work is amazing. It makes me wish I did have one though.

[@Ratchet-strap-Garage]

I'm not a fan of sport quads, I've always liked old utility quads, bikes and trikes .I like how this project is organized, planned ahead .Laid out and smooth. Unlike mine where it's a mess from start to finish. I subbed , I like your work.

[@cordellwheeler2561]

Awesome work. Major thumbs up.. not many people put time and effort into older machines..

[@codeg8884]

i very much love the little skits and fun things you do thats why your the best atv and all around channel on youtube , you got talent as a mechanic and entertainer my guy

[@jamesfigaro7684]

Easily the best rebuild page on KZbin

[@MichaelSabo]

Wow, thank you for that!

[@spencerclayton3172]

I just bought my 99’ 400ex 2 weekends ago and I’m so happy to fix it and get it running

[@BASSMASTERFROST]

The best part is learning what you do taking care of machines that need to make a comeback…it’s time to tackle a Trx450r

[@rafaelcordova6374]

"Aaaah my GOD! I cant believe Mikes putting a used clutch in! I'm gonna leave a comment, tell him what an idiot he is!! That'll show him!" 😂😭 Final product is such a gem dude!

[@MichaelSabo]

😂 I was waiting for this comment; thank you man!

[@Neel-xe1po]

This thing is the ultimate oldschool build !! Awesome job on this one dude !

[@MichaelSabo]

Thank you neel!

[@smartass6071]

I have a 2007 EX that has taken me to 5 regional championships and one national. Love the EX. Two of my regional championships was in bone stock form. Then I rebuilt the whole thing leaving only the frame stock. Putting out 52HP at the rear wheel now after the rebuild. Motor was done by a local guy and has lasted 5 session's without a rebuild.

[@topnotchbarbertv9523]

Dude my son was so excited that you did the funny 🤣 intro me and my whole family really enjoyed it keep up the great content brother. Good luck on your surgery I will keep you in my 🙏

[@MichaelSabo]

Andrew, always awesome hearing from you and it put a smile on my face reading that your son enjoyed it too. This reminds me, I need to go back through my email!

[@nou943]

i just scored an 06 trx450er for 300 bucks. It being my first quad i've found this channel to be super informative and entertaining. I come from dirt bikes so i do have a decent bit of knowledge. but anything on the chassis or suspension i really dont know much about. But, from this channel i've gotten it running, done a parking brake block off, new levers and just general tidying up of things. It sat outside for 10 years and is pretty rough but thankfully it was all under a tree and is 100% bone stock down to the brake pads. I appreciate the knowledge mike :)

[@MichaelSabo]

Sounds like an awesome resurrection man! I'm glad my videos could help you out 🤘

[@chuck4523]

Damn!!! I have a 2001 400ex that i havnt ridden in like 4 years. I wish i could do something just like this! So awesome to see. Bike looks amazing! Great job. From MA

[@marcmuke6378]

Also love that you bring projects back to life

[@AnanusBananus]

Rich is good. Love The long format vids and not removing The mistakes, and making it seem too polished. Amateurs, and pros too, Make mistakes. That is where you learn.

[@bretts8430]

Mate it’s good for young blokes and older ones to do the research regardless of the plan, have ur manual ready and most of all don’t be afraid to give it a go! You get some big credit by including a few blews (ozzy for mistake) it shows us blokes that even you fuck up but don’t lay on the floor and soon. You get back on it, good on ya bud

[@jdm4569]

Nice build Mike! Isnt that aggravating as hell when you get something put together and then having to go back and tear it apart again….We’ve all been there brother

[@jamesherrick4927]

Be nice to have a quad built by M.S all the videos I've seen they look like masterpieces when he's finished with them.. Nice job bro👍

[@choogy1]

Honda 400ex is probably one of the best trail quads to date for speed and reliability

[@choogy1]

I’ve had 4 quads blow up in the time I owned a 2001 400ex.

[@mikeyacullo]

This bike going to be awesome with all them new parts. Making me want another 400

[@hoyt1198]

I have watched alot of your old videos and just realized i wasnt subscribed so i just did i enjoy your content and seeing you turn worn out machines into sweet rides.

[@eduardolozano7411]

Cant believe I watched this at 4 in the morning but great build sabo

[@danielbosko9700]

Awesome job + video. Saving these old sport quads from the scrap yard is so important now that no one makes 'em anymore.

[@F5Tornado44]

DAAAAAMN!!! $500??? You just don't find deals like that in California. Very nice build dude. Especially that swingarm. That looks SAAWEET! The axle and swingarm alone is probably worth more than $500. You scored.

[@nasty2ndgenneon]

Iv had the niche dual row carrier in my 07 450r for almost 6 years not a SINGLE problem I got it when they first came out and it was like 48$ iirc look good tho! Sure do love using awesome to clean literally everything!

[@MichaelSabo]

It's hard to argue with the Niche and other chinese carriers, I don't think I've heard one bad experience with them. And yes, awesome is where its at lol.

[@DUNEATV]

I’m at a loss for words…this build and video was truly amazing! I’m blown away…

[@seanzanni2437]

I finally just picked one of these up one of my dream quads

[@rontarr4661]

I really like your graphics designs and how you let us know everything you change! Very informative

[@triggergriffin]

Nice job turned out pretty sweet and clean .

[@carlcjs316]

It’s amazing how far some tlc will go. Crazy how much better the front end and swingarm came out.

[@billyhill3127]

I watch all your content and enjoy each and everything you post . You have come a long way keep it coming

[@QuadGuyCy]

Awesome build. Those Burgard parts from 20 years ago are super cool! Shocks cleaned up nicely!

[@MichaelSabo]

What's up Cy! Thank you bro 🤘

[@QuadGuyCy]

@@MichaelSabo Yo! Still in the process of moving. 🤦‍♂️

[@joshholmes612]

I respect the amount of cleani g and refreshing you do to all the parts. Keep it up

[@leejennings173]

Anybody else love the underlying jokes thrown in there… (battery) “The bike on there is red, so you know it’s made for a Honda.” 🤣 With such conviction, too

[@MichaelSabo]

Lmao; I'm glad someone appreciates that

[@mikewisher4083]

Man isn't fun to rebuild these quads . That EX sounds good . Outstanding job

[@snappers_antique_firearms]

When you clean up old bolts or hardware. A great way to protect them is to nickel plate them. Its extremely easy and cheap to do at home. all you need is a battery charger, white Vinegar, a tiny bit of salt and a piece of pure nickel. There are many videos on KZbin how to make the solution with this Material and how to nickel plate parts. I prefer doing this over paint just because its far more durable. You can also nickel plate parts of any size. if you make enough solution and use a big enough container. I have done frames and a arms. Keep up the great videos

[@leopfeffer2419]

Good luck with your surgery Mike. No need to be heroic and try to rush your rehab. Get it right the first time. We'll wait for you.

[@MichaelSabo]

Hey Leo, hope all is well brother, miss seeing you at the gym; the good ole days. Thank you for the kind words!

[@1clnsdime1]

I love this long format video. Not having to wait for the finished bike is awesome.

[@derryjones1029]

Your real good at this fairplay she fired right up and was ticking over nice job well done👍🏻

[@ttatvoffroad2632]

Congrats man on the 80k basically lol 79k. Dude i get so hype to watch your vids, always learn tons of shit from you. I literally bought a 400ex because of your quadwarz series, and literally bought a 250r a couple weeks ago, I actually sent you it on insta. Love your content man, keep working hard. Your channel has grown so much over the last year its insane. 🤘😎

[@MichaelSabo]

Always love your comments man; glad I could inspire you to get into a 400ex and 250R; send the message on IG again so it goes to the top of my inbox; I get killed with messages and it's hard to keep up!

[@ttatvoffroad2632]

@@MichaelSabo you replied to it a while ago. Everything on the R is going good. Just fixed the carb up. Was leaking gas like crazy, just cleaning up the oem white plastics.. getting the brown tinge out of them. Orderd some gbc's its gonna be a nice bike. Next is fullflight a arms

[@MichaelSabo]

@@ttatvoffroad2632 sounds like it's coming together man! Don't forget to use my promo code if you order full flight; you get free stainless brake lines. The code is in the description

[@ttatvoffroad2632]

@@MichaelSabo holy shit man lol thanks dude. Didnt even know about that code hahaha

[@lilerictv5247]

I was thinking about getting me a quad n start making my own build I like that you put everything n every detail n your videos so I can see we’re certain parts go

[@jakeybm9954]

I watched the whole video and as I was enjoying it so much it felt more like half an hour instead of 1 hour plus

[@78PastorE]

I don’t even own a quad. Just stumbled across this video and really enjoying it. I think I’ll subscribe for more.

[@NoahMazraani]

An hour of Sabo content on a 400ex!? Christmas has come early this year!

[@paulgaines6305]

Michael Sabo prayers for your shoulder and hope U get better 🙏 Great Work

[@MichaelSabo]

I appreciate the kind words; thank you Paul

[@michaelorozco8809]

Hopefully you get well soon but it will be the perfect time for you to bring back the bike of the week videos i always thought those videos were fire 🔥

[@garthkerr621]

I just bought a Yamaha raptor 660 and I’ve never seen one in such great shape before and also had low hours and everything in the engine was in great shape even the clutch basket had very little wear along with the oem clutch plates

[@MichaelSabo]

Sounds like a good deal man!

[@dmoney8177]

Wow. This is impressive work. A master mechanic!

[@gabehafner2502]

I’m a fan boy of literally all of mikes videos!

[@MichaelSabo]

Thank you Gabe!

[@Davido50]

Keep the 426EX & the KFX450! Those KFX are very hard to find these days. Along w/grape ape you'd have an outstanding trio of machines. Well just my suggestion. Great build!

[@MichaelSabo]

Very true man, I wish I could keep them all!

[@The_MAD_Qyuber]

This takes me back to riding a 300ex in the dunes and having to do a quick clutch rebuild. (Dumont Dunes) Those Honda EX Quads are beasts.