First Ride on The Hydraulic Clutch!

[@MichaelSabo]

Thanks so much for watching my video 🤘👊 I will have a REAL riding video with the new clutch setup soon 👊 You all ROCK!!!

[@mxrider2strokebraaap54]

“Custom wrench that I bought directly from Yamaha”😂 Nice video👌

[@CantedDong]

That is one of the nicest sounding banshees I've heard on KZbin

[@goldenwheeledbanshee9160]

Yah, you rock 2 big Mikey, thanks 4 sharing and thinking bout us, cool Banshee.

[@pcostyle11]

I laughed way to much at 6:20 hahaha!!

[@haspin105]

*gotta say, Banshees sound nice!*

[@Cwilliams.24]

I’m a new sub I turned in notifications great banshee imma go look at some more vids keep up great work

[@TheChaz81]

Lol "already had people walking around giving me nasty looks." Takes it a half a block away.... Braaap braaaap braaaaaaaaaap! 🤣

[@bdogjr7779]

Awesome Mike《☆》Looking forward to you & John :*:🤓☻🤠

[@MichaelSabo]

Thank you BDOG 👊👊👊🤘

[@MrToddles12]

Been thinking of getting one of these for the banshee but dollars and cents are definitely a deterrent here. Lol. Great vid by the way

[@MichaelSabo]

Thank you for the love Todd 🤘 It is no doubt pricey, but if your clutch pull is really heavy, I think you'll he happy with it.

[@chevy43]

Awesome tool Michael. I laughed too hard!

[@DYLLY0456]

10:44 Top end rattle?

[@MichaelSabo]

Its something in the front end I believe.

[@bansheemania1692]

Have them on All My Bike's.... Except my 01. She is Dealership Clean.

[@ryantengler4045]

Aren’t you suppose to line up the arrows on the case and actuator arm when adjusting the pancake bearing? How I’ve always done it.

[@MichaelSabo]

Yes per the manual. However, the part of the case with the arrow is broken off of my case and it's a little different with the aftermarket setup I have.

[@JustJeremyCJ]

"Should be" if everything is stock perfect. Watch Kevin's how to video on South Texas Banshee channel. He explains it very well.

[@theawb6986]

In my experience. The oem cable was just better. I never got mine to adjust right.

[@ziggybammurphy191]

Any mods or grinding to the footpeg to install the lockup clutch? Im thinking of putting one on my 4mm...Looks nice btw...well done...

[@gt101080]

runs like a top man....lets see u n john hit sum hills in the next ride video

[@doomsd8541]

Speedometer GPS is a cool app that shows how fast and attitude of where you are at on the map. Check it out. You may not want to show your location on KZbin but for yourself or sharing to friends.

[@MichaelSabo]

I will have to check it out man! The one over been using is doing a good job for now (minus the pop up ads lol)

[@tomtaylor142]

Now that’s one fresh lady👍🏼🤘🏼😎🔥

[@g3t.r3kd_yt20]

Can anyone tell me the difference from a regular one and a hydraulic clutch

[@travise2774]

Man it sounds so good

[@pbpaulieb]

Great video man. I want to upgrade to a hydro clutch in the future. Thanks for taking the time to trouble shot your issue with us. I might run into the same problem. The Banshee is looking sharp BTW!

[@jeffgood6441]

Look into a easy pull stunt clutch first

[@jeffgood6441]

At least it isn't going to act up in the cold

[@Mrbluto]

Stupidfast has a clapped out quad

[@olivierdoucet2179]

I have a magura hydraulic clutch on my ktm 450xc and i never have arm pump

[@MrWasher74]

Do you have the part number for the "Yamaha Racing Custom Tool"? Ba ha ha ha........

[@michaelmangino9819]

Ma-Ger-A! Not Ma-jer-a! Thanks buddy gotta love Magura clutch and brakes on a KTM

[@MichaelSabo]

Haha, true that; I had an SX125 that came with one and it was butter!

[@grandpa-of-3898]

Was there just a couple clutch arms moving or is that how they work never seen a hydraulic clutch works

[@cojobesta11]

I’d suggest using these www.tekton.com/1-4-inch-drive-phillips-slotted-bit-socket-set-shb90104 instead of a handled screw driver, that was painful to watch, but I’m glad Yamaha came through for you. Also maybe a crows foot or torque adapter socket for the nut side.

[@robertjohnson3764]

If the hydraulic clutch feels the same as stock and isn't any easier, then what is the point of putting one on? What am i missing here?

[@danstevens2204]

Makes me want to start a channel to show you mine 👍

[@samuelbond4613]

Stock gearing ?

[@Grayday117]

Short little video = 15 mins lmao

[@locallyhatedyamaha6983]

Was your clutch slipping in 3rd

[@ProMotoo]

Ayyyyy

[@thatstuff1826]

Ayyyyy

[@BIGHEARTM1967]

Minty

[@MichaelSabo]

🤘👊

[@250race]

You still have to put the 450 coil on that bike did I told you about 8 months ago?

[@joemagallanes7828]

450 coil? why ?

[@250race]

@@joemagallanes7828 The 450 coil just puts out a hotter spark and burn cleaner the the 2 stroke coil dose.

[@johnsullivan2570]

Ayyyy

[@shiveermoodley3080]

Your wrench is called a vise grip

[@luke9299]

It’s a joke

[@sac-1H]

Please stay with the banshee, people underestimate it to other atvs

[@clementelara3607]

Is asome

[@AKSEHIR.]

Ik wil nieuwe Banchee voor België met papieren kopen

[@joshpressnell1520]

Can someone tell me if you could build a banshee like Michaels with 4500$

[@travisharbeitner7849]

Custom wrench strait from Yamaha 🤣

[@windshieldrepair5961]

I will buy One of them custome wrenches you fabricated from the production design line..........Exclusive, Explicit, hard to find custom tools are nice to have.....Clever You must have Gieco".........We saved 15% on our car insurance.........

[@keepflyingraceup698]

Right to an ad

[@briankennedy5578]

I don't see a need for a hydraulic clutch on a motorcycle. I've never had a problem with a cable which is less likely to fail. Besides, you only need a clutch to stop.

[@diytutorialsandmore9804]

It’s not majura it’s magura like the word guru

[@andikryeziu4349]

does anybody got any banshee for sale? (im interested)

[@austinsears1637]

Yea, I have one and so does my buddy. We're selling them sadly to get more money for the sportbikes we wanna buy asafp.

[@austinsears1637]

Both are 2001 and have tons of mods too many too list hahaha oh and we're not too set on the prices.... we really dont know how much we want for them but they both run and ride amazing! Mines a 4mm and his is a 7mill stroker. His is cheetah club cylinder mine is not.... his has in frame cpi drag pipes and mine has Toomey T5's. Both bikes have the latest V-Force ReedValves running on the highest quality race fuel and always have been run on the finest race fuel.

[@andikryeziu4349]

Austin Sears send me some pics of the banshees on Instagram (@andikrye)

[@AGA-hw5tc]

Hehe 69

[@jaybirdls1]

Don’t beat yourself up too much. My Banshee frame has been sitting on my garage floor for 2 years now...oops

[@MrToddles12]

I know that feeling way too much lol.