Micro Teardrop Trailer for a Vintage Vespa! Foamie with Poor Mans Fiberglass! PMF

This video is a collaboration that I did with Tom from "The Tiny Side of Tiny". He wanted a teardrop trailer to pull with his Vespa!! We ended up building this out of foam (foamie), aluminum and canvas (Poor mans fiberglass)! There will be additional build videos coming, but please enjoy this tour!
Build Videos:
WATCH THE FULL BUILD HERE: • Micro Foamie Vespa Tea...
Poor Mans Fiberglass Tutorial: • Poor Mans Fiberglass P...
Best Adhesive for Foamie: • NOT Gorilla Glue! Watc...
Check out my Teardrop Trailer Video: • Home Built Teardrop Ca...
Poor Mans Fiberglass Tutorial: • Poor Man's Fiberglass ...
Power inlet port: amzn.to/3oPYX74
Canvas Drop Clothes: amzn.to/3JVCMGr
Tom is launching his channel. Check out his adventures here: / @thetinysideoftiny7625
As an Amazon Associate I may earn a small commission from qualifying purchases.

[@shaunhall960]

Hi Lucy, it's been over a year now since I first saw this video and I'm getting ready to build a teardrop with what I've learned from you and others. My teardrop will be for my e-bike and as light as I can get it. I plan on traveling to my favorite spots and hopefully if all works out I'll be taking a trip to Nova Scotia with it. Thanks a bunch for all that you do on your channel!

[@thelwood]

That's awesome! Happy travels!

[@guym6093]

I had a Vespa just like that when I was 13 years old. I bought it for $5 from an friend who got it out of the garbage dump. He couldnt get it to run. I realized the spark was to yellow. Not hot enough. I figured out it was missing an ignition coil. I found an ignition coil from a motorcycle. I got it to run... My dad and friend couldnt believe I got it to run. At the time the shifting lever inside was also broken. I took a piece of metal and a grinder and built a shifting lever. It didnt have shifting cables either to the handle bar. I found some from a bicycle. My dad and friend was quite impressed. I had a lot of fun with that thing.

[@thelwood]

That is so awesome! And what a deal!!

[@Mike-hr6jz]

I have made panels from foam and fiberglass and they are usually stronger and take quite an impact so this was a great video I worked in a research and development department for an automobile manufacturing company and we made entire plugs to be molded from out of foam and found strength wise it was better than aluminum sheet and of course the insulator factor and the light weight I appreciate this video because it shows people in the public there are more options out there to build from. Thanks again.

[@thelwood]

Thank you so much! And thank you for that awesome information!

[@jackbishop5992]

I got a idea,could it be possible to build a small truck camper out of foam?

[@Mike-hr6jz]

@@jackbishop5992 yes it can, one of my friends did something similar using foam sheets , that you get from the hardware store big box .then spray foam in the corner and with a angle grinder and 60 grit paper to quickly form rounded shape than i’ll aluminum tape to get a smooth surface to pull off of using your release agent or you can use believe it or not Pam spray for cooking .woven matt first layer dry and use roller and brushes to get air out . then whin dry sandpaper scuff with 40 or 80 grit sandpaper and apply as many codes after that the inside will be slick you reinforce the outside with two by fours or cardboard or whatever flip it over .after you pull it off put release agent on The mold you just created and spray slick sand polyester primer first apply Thick say 2 to 3 layers or coats ,then win sticky but not sticking to your fingers .apply fiberglass first coat ,is the most important to get the air out of again you can let that dry scuff it apply more possibly 3 to 4 coats this will be strong enough when you pull this out of the mold .you will have an almost finished part you still will have to sand the rough spots fill some body filler in the low and air holes sand this and spray more slick sand. then you can do a regular paint to finish over this sounds like a lot of work but it’s not really that complicated .and you can make several of these parts out of the one mold you can just lay the fiberglass over the foam and finish the outside but this is not going to be nearly as straight and flat where it needs to be . If I did not mention the phone board has aluminum on one side and just Styrofoam on the other Styrofoam if you apply polyester resin directly to it it will melt you have to have the aluminum or painted with latex paint one coat to dry completely then apply a secondLet that dry and you should be able to lay fiberglass on the phone directly.

[@felixcat9318]

Seing that coffee coloured camper in the background it now becomes clear why the quality of this build was so outstanding! I remember being seriously impressed with the coffee camper, it was exquisite in every detail. As the constructor is also responsible for the beautiful, tiny Vespa travel cabin, it follows that it would be exquisite too!

[@thelwood]

Thank you so much!!

[@charlesswank6401]

Some might just call that Teardrop Nirvana. Being a teardroper myself and also having done a fair amount of motorcycle camping and bikepacking [and also entertaining my cargo bicycle/trailer fetish] I just gotta say, that's dope! Well played!

[@thelwood]

Thank you! It was fun!

[@PlayingwithSticks]

Absolutely love this video! Honestly, I think it’s the best video we’ve seen all year. You two made a great team and the outcome is just incredible.

[@thelwood]

Thank you so much!! Enjoy your build! It is such a fun and rewarding process!

[@thetinysideoftiny7625]

Brother, I’ve seen your videos. You have a great channel! Keep up the fantastic work! Thanks for the compliment. It was so much fun working with Lucy on this project!

[@Joeangel70]

This reminds me of a capsule in the capsul hotels in HongKong.

[@MB-wi2wo]

The stable is everything 🐎

[@thelwood]

😂

[@robertoalamo9567]

I´m from Argentina. Your project is incredible. Tank you very much.

[@thelwood]

Thank you!

[@chandrawakefield7987]

Lucy you and Tom did an amazing job. So proud of you and Tara!

[@thelwood]

Thanks Chandra!

[@Justsixs]

Silence is golden.

[@UnKnown-zy1km]

Love this little tear drop its fabulous you did such a fantastic job 👍👍

[@thelwood]

Thank you so much!

[@Myfunnybunny1]

It’s beautiful! I was sooo wrong… not like a coffin at all. 😁 BTW… Love the horses.

[@thelwood]

It is really spacious! I had the same concern when we started building this!

[@thetinysideoftiny7625]

Thanks Kimmy 😁. See Lucy, people love the horses. And by “people” I mean my sister 😂

[@thelwood]

@@thetinysideoftiny7625 🤣🤣🤣🐴🐴 I grew pretty fond of Bella and Duke 😂

[@MännerbudenWohnzimmerGarage]

Super toll

[@GTWoodshop]

That is totally awesome, well done both. 🏅🥇🥈

[@thelwood]

Thanks Graham! It was fun!

[@Heysarge99]

That is amazing… Thank you very much for the introduction and the fantastic example of what can be done with foam and poor man’s fiberglass! Wow…so awesome !

[@thelwood]

Thank you! It was a fun project!

[@michaelpreviti9168]

Hey guys. Enjoyed the video. My wife and I met Tom at Usery Campground a month or so ago. Great job on the design and build. Look forward to more video. Mike and Jane Previti

[@thelwood]

Hi Mike! I am so happy you met Tom! Thanks for watching, he was really fun to build this with!

[@mikeb3603]

Great engineering. I am impressed.

[@thelwood]

Thank you!

[@kellyn7280]

Super cool Lucy, the wife and I were giggling thru the whole video, awesome work, look forward to the build videos.

[@thelwood]

Thank you! It was a fun adventure!

[@obesetuna3164]

Amazing.

[@thelwood]

Thank you!

[@MiniMattTV]

That shape is absolutely perfect! Been looking at teardrops to tow behind the mini for a long time and this shape is excellent

[@thelwood]

Thank you!

[@johncopetti1253]

Well Lucy, all I have to say is my respect is immense. Sooo good to sedd people who are both talented, and who put the care and precision into their w ork. All the very best to you, and good on Ben.." I hope I got your name right", for having the love and passion for our history. Cheers and enjoy

[@thelwood]

Thank you so much! We had so much fun building this! And you are close with a 3 letter name, it's Tom! Thanks for watching!!

[@user-nb7wj8tk3z]

Looks great Lucy,You’re truly talented

[@thelwood]

Thank you!

[@kyrylkrytsun5298]

Amazing build, amazing video. After watching got very cool filling. Love this camper+Vespa :) best work done :)

[@thelwood]

Thank you! We had a lot of fun!

[@SonoranSunriders]

Way to go, you two! Anytime you want to show your teardrop off to the club, let me know and we'll set it up.

[@thelwood]

Thank you! That would be awesome! I am certain Tom would love to show it!

[@Go-zi1py]

There's a guy on the channel "Little House Off Grid" who built a truck camper out of 2x2's for framing and covered it in coroplast sheets. It's not pretty but he has used it for years on his truck living in it full time and then he added a base, lived in it on his property, built a tiny house and now uses it as a storage building.

[@thelwood]

That's very interesting! I will have to check it out

[@Go-zi1py]

@@thelwood check out JupiterHikes, he hiked it a couple of years ago and did a video series on it.

[@t-bone9403]

Really cool. Y'all really knocked it out of the park on this one !

[@thelwood]

Thank you!

[@hoagiesherlin7732]

So i watched all the videos on this trailer then i see yours in the background and it dawned on me i watched your trailer build years ago and it looks as good now as it did when you first built it your a pretty amazing woman with mad skills

[@thelwood]

Thank you so much! It is so cool that you recognized it!

[@tanujaaradhana9504]

Very impressive.

[@thelwood]

Thank you!

[@StanEby1]

Loved it.😊

[@thelwood]

Thank you!

[@johnthomas5806]

thanks, nice looking trailer

[@thelwood]

Thank you!

[@ErlySerrano]

Love it... I need it !!! Right now ❤️👌

[@thelwood]

Thank you!

[@michaelboyko5024]

Splendid video! Tho joke "I am normal size woman, but I look gigantic next to Tom" was a bomb💣:) The trailer looks really nice, so cute and quality vibes in every curve!

[@thelwood]

🤣🤣 thank you! I definitely felt like a giant the whole time we were build this!!

[@n.b.1267]

Phantastic job! looks good and absolutely practical. would work fine and look good with a modern Vespa 300, too.

[@thelwood]

Thank you!

[@lilivicordero8077]

Pretty awesome build!

[@thelwood]

Thank you so much!

[@briankopp6641]

I’m about a third of the way done with my 6x10 vardo style foamie for my car. However, I just picked up a nice Honda Silverwing 600cc maxi scooter, and found a trailer hitch for it relatively cheap. So I think I know now what my next foamie camper project will be! Awesome build. (But at 6’1” I’m going to have to build one a good bit larger!)

[@thelwood]

Thank you! I hope your build goes great!

[@fastzon8586]

Complimenti Lucy🤗

[@thelwood]

Thank you!

[@tarawakefield4383]

That is incredible! It's super cute and functional too! 🤣❤

[@thelwood]

Yes... function wins! Lol

[@thetinysideoftiny7625]

Who needs functionality when there’s so much art to enjoy 😜

[@thelwood]

@@thetinysideoftiny7625 who can enjoy the beauty if you can't use it! 🤣😉

[@mrerasmo1985ms]

i love this creation. davvero ottimo lavoro

[@thelwood]

Thank you!

[@helidude3502]

Nice compilation with you and Tom. Seems that teamwork paid off for you and your friends. Wouldn’t mind spending a night or two in that myself. Very nice build. You might consider watering that lawn. It looks a little parched😉 Yet was an excellent background to show off this little combo. Also nice to see the bike in good running condition 👍😎

[@thelwood]

Thank you! And yes... I love my "rock lawn" here in Arizona!

[@robs85gmc]

Amazing !!!

[@thelwood]

Thank you!

[@thetinysideoftiny7625]

Thanks Rob! I really appreciate you laying out the shape and lasering the windows. Looking forward to our camping trip!

[@collinmc90]

This is so cool. I would love one of these for my TW200. The looks this must get around town would be worth it alone lol.

[@thelwood]

Thank you! It does draw a lot of attention!

[@rehabem]

Wow! Tom has been a friend for years. He was telling me about this build and y'all completed much faster than I imagined. I looks fantastic.

[@thelwood]

Thank you! Tom is a good guy to have as a friend!

[@thetinysideoftiny7625]

Thanks Howard! We built it in only 2 months. Mostly weekends and a few weeknights after work!

[@hanzzarkov7690]

Not sure how this came across my feed, but really enjoyed it. Nice to see nice people getting together to make something funky cool (a nice presentation too!). Really came out great!

[@thelwood]

Thank you! It was a fun process!

[@MissKim...333]

That is amazing and I love the horses. It gives you something pretty to look at before you go to sleep or if you're stuck inside in rain. I have a motor and I'm loving this.

[@thelwood]

Thank you!

[@MissKim...333]

I meant motorcycle. I did watch the build video first and plan to watch the one on what glue to use with foam. I'll end up binge watching them all probably. Lol. I'm glad he's short. I'm 5'2" so dimensions will be perfect. Your channel is interesting.

[@thelwood]

@@MissKim...333 I figured you meant motorcycle :)

[@josh6488]

Love it

[@thelwood]

Thank you!

[@kathleenjenes8401]

I hope you and Tom are staying cool and comfortable in this brutal AZ summer!

[@thelwood]

Thank you! It has been crazy hot this year!

[@JavedKhan-149]

Super

[@vijayakrishnannair]

Nice,

[@thelwood]

Thanks!

[@lucasblizzard7261]

Great build, very impressed and not gonna lie, probably going to use this as a guide for the tear drop I'm making for the royal Enfield classic 350.

[@thelwood]

Thank you! I hope your build goes smoothly! I would love to see a picture when it is done!

[@felixcat9318]

The cynical former motorcycle mechanic in me imagines configuring a trailer as a towable motorcycle workshop...

[@thelwood]

@@felixcat9318 that would be super cool!

[@VEC7ORlt]

Cute little camper! Perhaps missing a solar panel.

[@ptonpc]

That is pretty :)

[@thelwood]

Thanks!

[@charlieredeemed]

I need a black one to match my E-bike👍

[@cecilpacetti1491]

Hey, Lucy. I just found this channel and I'm really impressed with your knowledge about "pmfg". I'm considering using it for my own camper build but I, also, want to build a 10' sailing dinghy to go with it. The usual method is marine plywood, epoxy, and fiberglass cloth( stitch and glue). You did say you were always looking for new projects and I am curious as to how a boat would hold up using the aforementioned "pmfg". Pretty please with sugar on top?

[@thelwood]

Hi! Thanks for watching! So historically boats were made with PMF, many of them it is was the boat deck that was made with it. I have thought about trying to make a foam paddleboard and coating it with PMF. I think it would do well for any boat that was pulled out of the water everyday and allowed to dry out. I am not sure if I would trust the seems completely for a boat that soaked a lot. I would opt for marine epoxy probably. Just to make sure the hard work of build is super protected!

[@Jack-ne8vm]

I like your sensible yard, too. Add some kind of scooter engine temperature gauge?

[@suvlife7187]

Wow very professional done! I would love to take my SUV Camper build and make it not look like a DYI project I did

[@thelwood]

Thank you very much!

[@grinlem1]

great😍😍😍

[@thelwood]

Thank you!

[@lesheath6216]

I'd love a segment on how y'all made the trailer hitch

[@jaynedoe1959]

You should add disc brakes to the trailer & use them instead of the Vespa brakes to keep the trailer from coming around on you. Get 2 matching small motorcycle front rims with calipers. Mount the master on the Vespa & use a long rubber brake hose before a hardline split to feed each caliper. Probably only add 20lbs to your rig.

[@thelwood]

Great idea!

[@PeterJames143]

in the next grownups movie this guy should play the leader of a motorcycle gang, with a leather jacket and his vespa :). you guys did nice work on this, pretty cool stuff.

[@thelwood]

🤣🤣🤣 that would be awesome!

[@maxboonkittypoison]

I could not hear anything really. To bad because i love this combination. Real nice trailer.

[@thelwood]

Oh no! I am sorry you couldn't hear it. It apparently was recorded to only play to one speaker and the speaker on one side your device must not be functioning correctly. I recently figured out how to make both sides work so this will be corrected in all of my future video. Sorry again!

[@mashedpotato3291]

genius

[@thelwood]

Thank you!

[@sirhcmi3]

Great video! I love the whole series!! I do have to ask how strong this is. Could someone stand on the roof for instance?

[@thelwood]

Thank you! It is fairly strong but I wouldn't stand on the roof of it (or any foamie)

[@massimocamorani8066]

well well I am impressed from ur building guys as Italian I know how the brake system is inadequate for the vehicle and project.I know there are some front disk brake conversion be sold aftermarket or,If I would be u, I would fit disk brakes at the dropy and command using the foot pedal of the bike.it is all cable stuff,having a sort of plug and play when u mount the trailer is gonna be safer and cool.Have a fun!!

[@thelwood]

Thank you for the information! I will pass it along to Tom 😃

[@massimocamorani8066]

@@thelwood you are welcome 🙂

[@teslafreedomenergy]

I like you, the way you work, and if I lived nearby, I would just come to see you and enjoy you and help you.

[@thelwood]

Thank you!

[@thesmallwoodlot433]

Cool build, and something to be proud of! Now comes the real challenge, a micro RV for towing behind a bicycle, tear drop are cool, but this may need to look more like a vintage “Shasta trailer” because it will be for myself and one small dog ( Golden Doodle) one full side slide out, and a usable kitchen would be nice! I am after plans and information, because would be building this myself. Registration is not required for bicycle trailers in NJ. I also believe we need to challenge our youth, so having this as a “pre teen “ design, build and use” challenge will achieve a few things, first it will engage their imagination on design, how to build, and ability to use! And can also give people like us the ability to mentor future creators! Are you up for the challenge of design,build , and use? The great outdoors are waiting!😂😅😂😅

[@thelwood]

Thank you! Your project sounds very ambitious 😂

[@MabrysDad]

Did you do a vid on making the trailer frame? I have a scooter as well and might be making one of these for camping adventures. But I’m 6’2” so I’ll be stretching the camper a lil bit.

[@thelwood]

One of Tom's friends did the welding for the trailer. It is welded aluminum. I have a pacemaker so I am not allowed to participate in any welding..boo 😂

[@DannyCoolBeanss]

Such a fun project to work on! It’s wider than I thought. Really surprised and happy to hear that 1” foam work great too 👍 Which fiberglass did you use btw?

[@thelwood]

Thank you! We used "poor man's fiberglass" (glue, canvas, and paint). I have a detailed tutorial on the cargo trailer I made. There is a link on the description. I will do a detailed video on that step for this trailer too :)

[@erikrowell1215]

So I'm going to be building a truck bed camper and was wondering just how rigid this trailer turned out as I'd like to save as much weight as possible probably still going to add some 2x2s for support but I'm kinda nervous about using foam

[@thelwood]

It is pretty ridged but I would go with 1.5 or 2 in foam for a truck bed camper and a few 2x4s would be a good idea too :)

[@raymarshall820]

I love that Vista teardrop RT for sale I no have problem trouble so where you live and I am really interested find something like that for myself I got a few more years to retirement but I like to scrap but I don't like Hotel long as I can get a chair on Saturday somewhere on a beach and chill out in my music to keep watching your video just starting to watch your video but I really like just teardrop

[@thelwood]

Thank you!

[@raymarshall820]

I have to have that in my life that teardrops I have to have it in my life you did a wonderful thing when you made that I could never build that I have a cannibal skills to tell something like that imma keep watching this program but also all I would need is a chair of small cooler in my music in my videos I am happy as hell out cuz even have a sticking in the garage when take up no space that's the beauty of it is so small and comfortable how do you set for life thank you Miss Lady thank you mr. Geek but tell y'all got a good thing going on I was just need a price of it

[@thelwood]

That you so much!! And Mr. Geek is definitely going to be my new name for Tom 😂 I love it!

[@joeyhillers9460]

Ok, this is how you build a camper. I'm currently designing a long range bicycle camper for selling purposes and this has given me a lot of inspiration. First off, pmfg, guess that's something i'm going to have to learn to use, especially if I intend to keep it below 120 lbs. Second, I like the amount of space and the back area for cooking. Genius. How well does the foam work? I'm thinking of doing my trailer from aluminum with foam style roof similar to the structure of an ultralight, but I may end up using this method alongside.

[@thelwood]

Very cool! The foam works really well, if you can find 1.5 or 2 inch foam for the walls that would be even better! But using pmf on the inside and outside of the walls provided a lot of rigidity!

[@Imightberiding]

Very cool. Love the retro styling & vintage Vespa. My only question is: Is a trailer licence & insurance required where you live & is it possible to do so with a homemade foam trailer so that you are able to legally use it on the road for camping trips?

[@thelwood]

Thank you! Yes, here in Arizona it is actually very easy to license a homemade trailer. You just have to take it to the DVM and pay a fee for an "inspection"... which basically means they measure it and put a VIN on it. It is probably much harder in other states. Our laws are pretty lacks...

[@alaskally]

@@thelwood My question exactly and your answer couldn't be more useful to me. I just move to Arizona! I stumbled upon your channel a few minutes ago. I will now go on a binge, then draw up some plans. It would be so fun to build something like this!

[@bradpetersen5595]

How do you attach the roof vent ? Do you just screw into the foam or do you put boards underneath the foam ? Also how do you attach the foam to the trailer ?

[@9amStudio]

I love it. I bet you I can tow it with my Rad wagon ebike?

[@thelwood]

Thanks! And probably!

[@friedfish69]

Just a guess - the light weight of the trailer is the only hope you have of stopping quickly with those brakes. Wear boots with thick soles, just in case.

[@thelwood]

It actually stops really well, but the light weight does make wind gust challenging.

[@MP-mj3rj]

Love this! Did I miss where you said length and width?

[@thelwood]

Thanks! The base of the trailer is 72"x40" but since the sides curve so much from top of the body to the back just under 8'

[@mariadmaldonado8086]

To think of making it out of foam, sounds soooo fragile. But, end result turned out to be awesome!

[@thelwood]

Thank you! It is way sturdier than I expected!

[@ravenartsandgraphics4456]

Awesome video. Very well presented and great information. I've been working with PMF off and on for a couple of years but I've learned SO MUCH from your channel. My question concerning this build is cross winds. With the super light weight of the camper and scooter, does this present any issues? Thanks and Keep the great vids coming.

[@thelwood]

Thank you! And you are absolutely right, wind is the most challenging issue. I said "I think we are building a sail" several times. Tom is an experienced driver and he is very aware of the weather prior to heading out.

[@turagaygumus636]

Süper 👏👍🇹🇷

[@thelwood]

Thank you!

[@Pudentame]

That storage area DOES have a nice "Mid-Century Modern" aesthetic. It would fit in perfectly in 1950s Los Angeles ... especially the "I Love Lucy" episode where Ricky went to Hollywood.

[@thelwood]

Thank you!

[@vicman579]

Awesome build! Are you planning on sharing the aluminum frame design/build? Would be very interested!

[@thelwood]

Thank you so much! If you contact Tom on his page he can give you the details. The trailer frame is the one step I was not involved with. He and his friend welded it out of aluminum. I have pacemaker so welding is the one thing I am not allowed to do. Thanks for watching!

[@josephdupont]

How did you get the trailer licensed? I think one of the things is the tires have to be up to a certain road standards. If it's gonna be powered , otherwise you can get away with bicycle wheels if it's being powered by a bicycle

[@nativeeurope1299]

3:40 Random place to see dalahästar (Swedish horses).

[@johnzee691]

looking at your shop and the techniques used, obviously some skills involved.....approximately how many person hours went into the build?

[@thelwood]

We built it in 2 months, mostly weekends (probably 13 full weekend days) and maybe 6 evenings after work. So probably 160 ish

[@luc1ferblack]

how much do you reckon it weighs without the trailer? I want to build a camper to pull behind a large 1300cc motorbike. the problem is due to uk law trailer has to be 3ft wide but a load can be any width so i will need to build the camper so its removable this creates issues as i want a backup battery in the trailer and a diesel heater as well. im not sure if i can build a steel trailer if this is light enough or a aluminium one to save weight. do you sell plans of the build as making the top hatch and door waterproof sounds tricky. I bet the foam mus work well for cold weather and fans will probably help for hot i will just do a drop tube that goes close to the ground as the inlet and a top vent sunroof etc as the outlet

[@dougmc332]

Are you taking custom requests? I would love to have one that is a pop up tent trailer with some space for a bit of luggage for my little Stella scooter.

[@Captain514]

So you cut the foam every inch? What was your depth, or there abouts? I feel very inspired! Fascinating how you were able to bend the foam to such groovy angles.

[@thelwood]

Thanks! For the tighter turns I had the blade set at almost 1/2" and for the rest I did 3/8".

[@nativeeurope1299]

Thats awesome. Did you do a test "camp" yet? You have to do that. Your dog can sit in the trailer if you have one to take with you.

[@thelwood]

Tom has taken it out on several camping adventures!

[@troy7124]

Would this type of construction hold up to highway speeds say behind a dual sport motorcycle?

[@thelwood]

I would go with 1.5" or 2" foam to make is sturdier. That would give you larger surface areas at the joints.

[@shanonsavon8815]

Hello how much did foam teardrop cost and where is your shop located at

[@garycochran2037]

Thats a hoot!!! whats top speed? job well done!!!!

[@thelwood]

Thanks! About 45mph

[@mikestefanick7542]

Are there plans for the trailer frame?

[@spideyphl1800]

is it legal on the street ? you guy's super AMAZING

[@thelwood]

Thank you! Here in Arizona you can register just about anything... it probably wouldn't get approved in a lot of other states

[@UnKnown-zy1km]

Was here 7 months ago came back to looks at this fantastic little tear drop. Me and my husband recently got a Harley we plan on doing a cross country trip with no time limits. We looked at some motorcycle camper hated them most are a tiny trailer with a tent in top and thaf not what I want plus they are way to expensive. Then I thought of this very cool tear drop camper I would do a few changes for what we need but this is prefect for us... So I have a few questions. What is the total weight? What was the material cost? And what glue did you use? And the material use to put on the foam for the poor man's fiber glass? This is by far the best foamy camper I've ever seen. Its very nicely done you have mega talent I think you could make these and sell them with no problem. It's fabulous

[@thelwood]

Thank you! It is 170lbs. I used foam fusion for any foam to foam or foam to wood parts. I used titebond2 for applying the canvas for the PMF. I am not certain of the total cost. The biggest expense would be the aluminum trailer and Tom had a friend who welded it for him.

[@albion2742]

Lucy, how is the canvas holding up on your TD. Do you cover it in the winter.

[@thelwood]

The canvas is holding up great! I have made 3 trailers with it. My personal teardrop is 7 yrs old. It has a cover on it and is under a lean to. My cargo trailer is about 4 yrs old and is fully exposed to the elements and is also holding up great. With that being said, sun and heat are our big issues here in Arizona. None of them have ever sat out in snow.

[@Road_Rash]

Where's the video for building the little trailer it's sitting on?

[@thelwood]

Tom's friends welded that. My involvement started right after the trailer was made. I know Tom shot some footage of that process, but he hasn't posted a video on his channel. I have a pacemaker so I am not allowed to weld and stayed far away that day :)

[@ernie5187]

Can you please tell me how you attached the long wooden dowels that hold the side walls? Thanks so much

[@thelwood]

I drilled 1 in wide, 3/8" deep holes with a forsner bit, then used foam fusion in the holes and inserted the dowels. Then I applied clamps (with light pressure) and boards under the clamps to distribute the pressure and reduce denting the foam.

[@ernie5187]

@@thelwood Thanks so much...Also what skewers did you use? Metal or wood skewers? Thanks so much

[@ElementCabinet]

Looks great. What were the dimensions of the frame?

[@thelwood]

72"x40"

[@michaelknight9336]

Is this combination road legal..? 🤔