Microtech UDT Lives Again: The $185 LUDT!

[@jejustissIII]

Nutnfancy, 2:13 to 2:53 there is no audio.

[@PoltergeistWorks]

It's LARGE UNDERWATER DEMOLITION TEAM, not LIGHTWEIGHT. LARGE because there was an UDT that was smaller.

[@mactheknife801]

+cubixthe exactly - btw I need another PG blade from you Jakub! :) Hope you are well.

[@BS-sm4gi]

Hey Nutn at the 2:12 mark the audio seems to go out for about 30 seconds for me at least. Just a heads up.

[@9paulj]

tnp version all the way man!! I'm digging the surge, great timing, I have time off work right now. Appreciate your countless hours of work. thanks nutn+family and guests to the show.

[@nutnfancy]

I am stoked this knife has come back. The Microtech UDT/UMS and now called the LUDT auto knife has always been a winner. It's light, super fast, good looking, and gains in value over time. The Lightweight Underwater Demolition Team reissuance captures all that and more and you will see it here in detail. Maybe a TNP version too! -nutnfancy

[@Gr8whitestang]

I dig Microtech now thanks to you Nutn. I am super stoked they are here in NC. I would love to have one TNP edition.

[@jeremycorrao]

I'd love to see TNP edition!!

[@ridedirt73]

Yes!! Please make a TNP edition of this knife.

[@jasonbarrameda9818]

blade hq site says L is for LARGE. Might explain the similar weight to the older models.

[@greatlakestrout]

Yes on the special edition, if I can order online or on the phone

[@stocksilver]

Hey nutn I would love to see a surge in camping gear. Krvs are great but missing the camping vids. Thanks fellas

[@azhawk516]

Yes on the TNP edition.

[@joepalone5200]

Just got a blue with coated blade yesterday and it is insane cool!! Excellent knife!

[@joepalone5200]

+Joe Palone Loved that fucker so much I grabbed a red one too!! Fantastic F&F, fires hard, sharp as shit and incredibly sexy!! Can't say enough about this bad ass blade!!!!! I would LOVE a special edition of this bad boy!!!

[@thegeth4293]

your description says s30v but I just looked at mine and it says elmax. and yes it was a runaway, when I found out about the production I could only get the serrated model.

[@masterchiefg117]

tnp version? I think yes. I would love to purchase one

[@Sir-Topham-Hatt]

loving the knife show

[@Surkit914]

As someone with the last name of Ludt (pronounced loot) I've wanted one of these knives for years! It's my most coveted knife!

[@BirdShotIV]

Yes I'm very interested in the TNP edition

[@ClpBushcraft]

Yes Nutn please come out with a special TNP edition one. I missed out on the TNP ultratec but would for sure buy a TNP edition in this knife

[@sruck22]

Yes come out with a tnp version. I missed out on the others

[@kingpin3919]

Another knife video!!! Thank you Sir. Loving it. Merry Christmas to you and the family

[@natelowery]

TNP edition please! Will definitely buy one!

[@JohnTurner69]

Bring on the TNP edition so I can add it to my TNP two signed Survive GSO-5.1 knifes.

[@weilki451]

I would love to see tnp special edition again

[@plamen2110]

I hate that youtube didn't notify me that you have 4 new KRV's out!!! :( But I'm so glad you did the vids. You're awesome man, keep on truckn'!

[@GUNDOG16]

Yes very interested in the tnp edition!! I was looking at buying it today trying to research it and boom you put a video out on it!!

[@propblast82nd]

Merry Christmas nutn to you and yours !

[@grayfox11010]

Would love to see a tnp version of this.

[@tbarbin1]

I would love a TNP LUDT exclusive!

[@charlie.h.4]

yes yes yes. been waiting to get an auto and would totally make a tnp edition my first!!

[@michaelbonade4667]

those 2nd Gen LUDTs ..(the 4 channel handles) were some of the best ever made..they lock up rock solid and when the blade is retracted , there is ZERO movement ..Josh from PVK sold me 2 used MTs he happened to have...a 2001 LUDT and a 2003 UMS..he's such a cool guy to deal with and i love that he'll take a order over the phone...lots of places are like.."..blah blah,..go to the web-site..."....and i thank Nutnfancy for mentioning PVK in his Benchmade Presidio video long ago...that drove me NUTS that he hade a RED AND a PURPLE limited ED AUTO Presidios....and matching serial numbers :)

[@Dont_Poke_The_Bear]

OD green scales please!

[@inversionlayer]

I have been fortunate enough to obtain two Nutnfancy limited knives in the past (Survive and Lionsteel). Count me in for a Microtech if I am third time lucky.

[@slugsandstuff]

I would be interested in a tnp version now that TN is an auto friendly state.

[@RADROCKS22]

Yes to special edition TNP version!

[@scottishpride032]

I love TNP blades as much as the next guy but I couldn't afford the awesome purple lionsteel when it came out, and won't be able to afford a TNP ludt if you do a version. so grateful that I had funds and timing for my TNP ultratech. it is a cherished safe queen for my small collection

[@duroisgawd]

I just ordered a purple/black blade LUDT. I'd like to think of it as the tnp version.

[@highonknives3406]

I'm good for one or two! Purchased the Nutnfancy "Purple" Lionsteel SR1's in both the satin and black versions. Love those knives!

[@PRCHOCO]

I thought the pink one was the TNP version. lol Happy Holidays to you n yours.

[@bulltastik]

You & Microtech build it, TNPers will support it✌️

[@michaelomodt-lopez7227]

I am definitely in for a TNP microtech LUDT

[@oxman1800]

Wow that is a perfect EDC auto, wish I could buy one!

[@harveyts3]

Yes. Yes I do want to buy one from you.

[@sassed12many]

A TNP KRV for Christmas. Thank you!

[@pipboy8787]

Yes have the TNP edition of the LUDT I have the ultra tech and love it!

[@OverlandAspirations]

Yes yes yes I would buy a ludt tnp version in a heartbeat. I want one of these blades anyway so that would be a good push!

[@manuelivanmunoz2186]

Please do a TNP edition

[@LuisDiaz-lk9pf]

TNP addition would be so awesome. Unfortunately I live in SoCal. I'd never be able to own it legally. But it would be so cool and I'm guessing it would be super collectable in the TNP nation.

[@aronziegler1814]

I would love to see a tnp version of this blade!

[@kennyvancleave2422]

I just bought the red version with the stone washed blade. Merry Christmas to me. Believe it or not, I checked out the Tactical Response from Protech and yes they still had it for $158. Such a great deal on both of these auto's. I was one that bought the TNP Microtech , so with both my hand up in the air and me screaming "YES". How cool would that be.

[@timlipinski2571]

Great looking knives. Two SOG knives for my basic set up. Merry Christmas and Happy New Year ! And thank you for the video ! tjl

[@seantnper881]

dude I would love to see a bright yellow version with a black and satin blade!

[@pville5548]

I would like to see a TNP release. Wouldn't want this one to work out like the LionSteel release though.

[@nolanclark2792]

Dude! TNP LUDT would be sick!

[@mrpsarros1]

sound?

[@NXBXDY333]

I would LOVE a TNP edition, count me in for sure!!

[@fate930]

Hey Nutn its actually LARGE- Underwater Demolition Team knife not Lightweight just FYI. There have traditionally been three models of the UDT knives the LUDT, MUDT and Mini UDT, I know you are not super familiar with higher end stuff but the correct name is even listed on the Blade HQ site. This knife has been around since the early 1990's look up the "black knife"

[@TanBurch]

Would Love another TNP microtech

[@vexbomer]

I thought it said LVDT as in linear variable transducer

[@jarredburlington]

just got mine in blue. my understanding is Ludt is Large underwater demolition team, i could be wrong

[@dharner4]

Instead of a nutnfancy edition of an existing knife, why not a nutnfancy designed EDC assisted knife with all the features dialed in?

[@socketman]

Heck yes TNP edition

[@paulyoshida1747]

Yes! to the special TNP edition. Please give us some advance notification if it does happen, and please produce enough so they at least last a day. Colorations? I scored two(one in tan and one in blue) plain edge versions as soon as I saw them on BHQ's website, so I'm good with that. This knife is quite perfect as it is. A loop over deep carry pocket clip would be the primary design modification I would request(especially since they're using proprietary screws, so I can't easily swap it myself). Different handle material would be waaay cool....like a carbon fiber edition, or even a pure G-10 edition would be cool as well. Aluminum just doesn't wear well over time. It will get that boba fett effect going on...which is ok, but makes me reluctant to use every day. Love the surge. Keep it up, Nutn! Merry Christmas!

[@deansmith5163]

Heck yeah nutn make a TNP edition!

[@nick27877]

I would defiantly want a nutnfancy edition

[@turbofc]

I am in on the tnp version. not a huge elmax fan tho.

[@bruechel]

Your video has a glich in it nutn'. And because of that stunt you pulled on a recent KRV I thought you were pulling a fast one again!

[@duroisgawd]

I want the Nutnfancy run!

[@trevorpool6822]

Yes, We want the TNP edition

[@acclaimedsheepdog6375]

It's already gone up 30$ on blade HQ just 3 days after I bought my tan and black one for 195 now there 223 or so

[@sherman614]

I don't know.. Looks too heavy to me, it probably weighs more than my own hair, so obviously Microtech dropped the ball. I really thought they knew how to make a quality product, clearly not since I can actually feel the knife when I'm holding it. Oh well, I guess I'll stick to EDC'ing a whittled down goldfinch feather.

[@joshuathompson3002]

Keep the knives coming

[@SpydieFan]

I'd definitely pick one up, especially if you did some unique Camo pattern.

[@mleeman01]

Big Yes to the TNP edition

[@phantomego123]

thought the blank audio was gonna be like the last KRV where you did it on purpose.

[@555Gear]

Yes on the special edition!

[@adamgardens2814]

Long live the krv surge! Woohoo. Merry Christmas Nutn and family.

[@HuskyKMA]

No sound from 2:15 to 2:55.

[@jardo531]

TNP edition would be SWEET!

[@uncleben4536]

I want a tnp microtech, but only a manual action blade. They aren't legal up here in Canada. Keep making great KRV's nutn.

[@thor-dx8sz]

Kansas is now a auto knife friendly zone as of 2014

[@NaihanchinKempo]

I know it's costly But i'd love to see you do a Vid on Rockstead knives minus the fixblade as they cost as much as a small car

[@josephp3271]

TNP edition would be great. I am moving to a legal auto state this June.

[@skyhop]

I wish I could have got the TNP ultratech. Just wasn't legal here at the time. Luckily I found a purple and black bayonet ultratech and snatched it up.

[@Pville_Boy]

I live in Tennessee I have a microtech ultratech in urban camo with the partial serrations and bayonet blade. I'd love a tnp utd.

[@bobbyb608]

East middle or west?

[@rickstark85]

Nashville checkin in. What it do TN!?

[@hurt1704]

Murfreesboro checking in

[@rickstark85]

Cool deal. I work in La Vergne.

[@PIConnection]

YES NUTN! WE WANT A TNP VERSION!

[@nate_6163]

Yes!!!! Do a nutnfancy TMP edition!!!!

[@danielheller9624]

We want tnp edition. But wait, I live in cali.

[@pinkiewerewolf]

+Daniel Heller Same here.

[@danielheller9624]

It sucks so hard

[@MrAndrewmcgibbon]

A representative of the peoples republic of Kalifornia will be visiting you shortly

[@BurninatorTheTrogdor]

+Daniel Heller I think you can own one you just cant carry it.

[@danielheller9624]

+BurninatorTheTrogdor yeah, but if rather spend money on a blade i can carry. same goes for bali's, otfs, knuckles, rambits with a ring(technically) and all sorts of other good stuff

[@chrismurray9648]

Absolutely make a TNP model! As soon as I bought this knife and got it in my hand I was like "Nutn needs to review this, definitely HOF material!"

[@tcarp1616]

Very cool knife man!!!

[@banditone00]

I appreciate you suggesting soldiers and cops get these as gifts. Since I'm a veteran and a cop should my wife get me two colorations of it? She got me a new Ultratech with the Trigrip for Christmas, so I'm guessing I won't be getting another auto too soon.

[@josephp3271]

I got my hands on the Chris Kyle Limited edition Protech Godson. I love it.

[@akihide.uchida]

I'd love a TNP LUDT!

[@dylan-gh5ll]

yes make a tnp edition!

[@Schroeder_-yh4sq]

did you change they way you list your like scale?

[@strider_sphinx]

I'd be into a TNP special edition. I have a Halo and a Ultratech, and was going for a Scarab next, but I'd put a TNP special edition of the LUDT on the top of the list if it was available. FDE scales with black blade? Make it so, number 1!

[@nutnfancy]

+Strider I'm pushing for some funky colors. Everyone keeps saying FDE, but WTF is so special about that? Everything comes in tacticool colors these days. I really like some of Lionsteels' anodizing colors. -TD

[@strider_sphinx]

+nutnfancy For me personally, FDE is a color I don't have in a microtech. I do like some of the new colors they're doing on the Ultratech Tri-grip however--the burnt orange one with black fasteners is a good look (www.bladehq.com/item--Microtech-Ultratech-DE-OTF--31807). The blue, green and red are also cool. If you could get em to do a non-production color/color combo that'd be cool. Also have a red Lionsteel SR-1 on my list. A bit slick in hand for fast handling, but too beautiful not to want one!

[@ezekielherrera4070]

+nutnfancy lol rat worx knife I meant you should review one some day

[@leeharrell67]

TNP edition? YES!

[@m1henry]

Have it and love it. TNP version would be killer. Lets make it hapen

[@ryanb9395]

yes to the tmp version. would rather see that 940 Osborne in a tmp version though.

[@Serenityindailylife]

def want to buy one or 2 of these. The "L" stands for Large not Lightweight according to Blade HQ...not sure who is right, but you guys need to work it out if your going to sell them through them... not a sticking point, its just a little error, no biggy.