MICTUNING 8 GANG RGB SWITCH PANEL FOR AUTOMOTIVE LIGHTING & ACCESSORIES | BOATS GOLF CARTS UTV

#ledlights #switchpanel #automotivelighting
This is a makes adding led lights bars, air horns, wheel lights, led whip lights or any other accessories much easier and cleaner than ever before. Everything you need to install your accessories are in the box. On todays video I used a Power Queen 12v 190ah Lithium LifePO4 Battery to power the accessories. I will be doing a battery capacity test on this battery very soon.
12 RGB - amzn.to/3IvZfdm
8 RGB - amzn.to/3J1aoEk
8 RGBW Rock Lights - amzn.to/3ZrMTJZ
Flush Mount Light Pods - amzn.to/3m98Z5H
Power Queen 12v 190ah Lithium Battery - amzn.to/3kzzd0K
Amazon Free Trial - amzn.to/3SS37u9

[@5Flaash]

Thanks for taking the time to step through this setup. It looks like an ideal arrangement for my projects.

[@David25522]

I really like this setup!

[@mictuning]

Thank you so much for your share and awesome video as always!!

[@saaditubeyou]

Thanks for the r switch info 👍

[@el_cucuy8528]

Awesome review on the switch panel , only thing about this that alot of people dont like is that its a ground switch which you explained by adding relay for pod lights and they have a new switch panel that is the same but it is a powered switch so you wouldnt have to add that relay which im glad they updated because like you said its a nice panel.

[@Fentertainment]

I have the new panel in another video.

[@Peculiar_Hodag]

I have the auxbeam version and it works great.

[@cristohidalgo]

Nice lights bro👍

[@Jeeptj1300]

GREAT INFO . HOW LONG IS THE CABLE FROM THE PANEL TO THE FUSE BLOCK ?

[@TubeFan96]

Great info Ryan as always. Can you tell us how tall the body of the lights are? From Amazon it looks like the dims 2"x3" but I didn't see any reference to the profile/height.

[@mikescott6247]

Dude the k2 was confusing me since it was 3 wires an I was tryna wonder how I was able to use that combo with that one wire left now a relay definitely sense thanks man!

[@aldoamen]

Same 😂. I have been thinking about the 3 wires for too long and how I couldn't control the amber separately 😅

[@garagebaggerstereo]

I looked and did not find a review video on the power Queen battery. Was wondering did you do a video and I just missed it?

[@shawtdog]

Thanks Ryan I'm definitely getting that switch panel for you golf cart it's a game changer

[@Fentertainment]

I think so to. I can’t wait to get to the stage of installing it.

[@shawtdog]

Make sure you make a video of the installation 👍🏾

[@williamtholken6147]

@@Fentertainment can this be installed through a converter I have a 48volt club car ds with a Roykaw Golf Cart Voltage Reducer Regulator Converter 36/48V to 12V for E-Z-GO Club Car (30A/360W) I bought for it.

[@Fentertainment]

@@williamtholken6147 Yes, So the converter output will go to the main power & ground input on this system. Then you will have all the switches and fuses already in place just to add you accessories. Just makes for a cleaner install.

[@carlosq5910]

@@Fentertainment will you make a video eventually on how to do this? I currently have a 36v on my golf cart. Both converter outputs go to the main panel or just the positive goes to the panel and the negative to the battery?

[@darinhouston1009]

I have wired a number of things to it but have one 12" light bar that won't seem to work - when I connect the positive wire of the wiring harness to battery, the circuit board LED lights up regardless of state of the switch panel and it doesn't operate the light bar. (normally the LED only lights up when the switch is on). Any idea why? It's a simple light bar (nicoko 12") with a bluetooth control module and only two wires to the switch.

[@RobertMcAlpine-cu6qx]

Wondering if it could do ignition and starter on my buggy

[@fdurango]

Bro, can I use the switch panel that has 2 sides and connect my 3 wire led bar, ground and amber light to one side and the white light wire to the other side to avoid using relay? Let me know if this will work please

[@golocok]

Tengo una lampara con 3 posiciones, trae tierra y tres cables mas, como instalarla en el panel? Con dos relays? Gracias

[@iraqviva7670]

Can I extend the 3pin cable that goes from the panel into fuse box

[@JayGeeJay]

Much more affordable option than SwitchPro SP9100. However this doesn’t have flash or strobe function. I chose MicTuning

[@justinmireles8006]

Late to the vid but how many amps are the rock lights pulling? I have the same ones and don’t wanna plug into the wrong location and blow a fuse. TIA

[@justinmireles8006]

I have an auxbeam gang switch with tie ins from 5A to 30A

[@T4fi]

I almost bought it, but information about switching the ground, not the positive is so important to me and make this inappropriate for my application. Thanks for that this

[@Fentertainment]

Understandable. The new one switches power and not ground. On this one I used a 12v relay to switch polarity for one thing I powered with it.

[@T4fi]

@@Fentertainment OK, great news. I'm goin to reach out to them and see if I get what I need. Thanks for reply

[@nola2635]

Only thing I don't like is the negative side switching.

[@Judy_zy]

what’s negative side switching could you explain for me❤️

[@darinhouston1009]

I think what he's saying is the red terminals are always hot and the black wire only is opened and closed for each terminal.@@Judy_zy

[@Carraudio402]

Sounds like a design flaw in their lights. Why wouldn’t they make the lights they sell have individual grounds for each light. They could share the power if they wanted to keep it a 3 wire setup.

[@ThomWalbranA1]

It's a copy of the Aux power system except aux has phone app and can work with your cars touch screen no relays, 😡