Honda 50 XR50 CRF50 - Carburetor Clean - Carb - Wont Start or Idle - COMPLETE

[@carsonaltmann6506]

Just now realized the pilot jet pops out😂 Your a legend man.

[@MidNebraskaMotorsports]

Not nearly as cool as you!! A one handed pit bike jump!! Be careful. I would never do such a thing!! Thanks for watching and the sub!.......or have you? Check out: amzn.to/47Lokwr

[@HenryDoesStuffShorts]

@@MidNebraskaMotorsports My shock is blown so i might make a small purchase 😉

[@justmemasonbrewer9240]

Right

[@tonygSDWR]

Thanks, by far the best video for this carb on YT.

[@MidNebraskaMotorsports]

Thats awesome, thanks! Hope you can find more great videos on our channel. kzbin.info

[@alcro38]

LEGEND! Frustrated as hell that I bought an unkillable crf50 only for the carb to be knackered. Took to a specialist and was told it was a no go. Watched your video and realised everyone so far has been trying to tune it with the choke wide open! 🙈 Runs like a dream now 😂

[@MidNebraskaMotorsports]

Love it! Hit that subscribe button so this video reaches more folks like you. Thanks for watching and the comment. I have more videos on the CRF50 if you need help with anything else!

[@jeremyhewitt2637]

This is the best video for problem solving this carb

[@4th]

ive watched this video about 5 times in the last week amazing bro ! - will say this export at 4k and upload at least 2160/ 2K for detailed videos - love the media man thank youuu!

[@MidNebraskaMotorsports]

Happy to help. Your media talk is over my head. Thanks for the comment! Let us know if there is anything we can help with. Check out: kzbin.info/www/bejne/jmGklXmuoK-chck for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.

[@4th]

When you finalize your videos in your app or program when you export, export at 4k at 24fps

[@Thisandthatdude]

Very detailed and thorough video. Perfect. Going to do this to my sons XR50R. Thanks for your time!!!!

[@Turboek99]

This the best video and full detail.thank you friend,wish would've found this great vid wouldve saved my first throttle cable 😂

[@MidNebraskaMotorsports]

Happy to help. If you need more helpful tips, check out: kzbin.info/www/bejne/jmGklXmuoK-chck and if you need parts: www.ebay.com/str/midnebraskamotorsports. Thanks for watching and the comment.

[@johnrichardson8048]

Sick vid bud. My kids 50 has a low down bog real bad. I knew it’d be the pilot jet.

[@MidNebraskaMotorsports]

You got it!! Did you get it running good? Thanks for watching. I have a bunch more Honda videos coming out. Hit the subscribe button so you get notified!!

[@ehd1990]

When my bike was parked, it would leak gas out of that bottom nipple. It would leave a little puddle under the bike. I took the carb apart and it looked pretty spotless. I watched your video and when you mentioned a grain of salt wouldn't allow the float needle to close all the way, I decided to spray carb cleaner in the seat. A few pieces of rubber flew out of the port when I sprayed in the seat. Put the carb back together and wallah, she doesn't leak anymore. Just wanted to say thanks for the info, your video is very helpful.

[@thijsdewilde487]

Very helpful my xr50 runs great now!

[@MidNebraskaMotorsports]

Awesome love to hear this!! I realize it’s been awhile, but wanted an update on the XR?

[@allenpowell5620]

Nice job on the instructions, well done. Thank you!

[@MidNebraskaMotorsports]

Thanks Allen. We have more CRF videos coming soon. Make sure you hit that subscribe button so you are notified when they are posted. Thanks for watching!

[@justcrawlers]

Great video but I still can’t get my pilot jet out. I’ve tried pliers and have scratched the jet up a bit already. I don’t want to smash it but want to get it out because I can see gunk inside of it. Any ideas? I’ve got a 2002 carb and xr50 btw. Any help would be greatly appreciated!

[@MidNebraskaMotorsports]

Tough deal. I’ve heard they can be a bear. I’d be happy to take a look. Thanks for watching and the comment. Let me know if you need anything. www.ebay.com/str/midnebraskamotorsports

[@0minifreak]

Saved my day. Thank you

[@MidNebraskaMotorsports]

Happy to help. Let us know if you need anything. ebay.com/str/midnebraskamotorsports

[@justmemasonbrewer9240]

Thank you for this video

[@nathansmoker577]

That clip that holds the needle in place there is a place where it seats on a ridge should it be past that ridge? and should the needle move up and down or have no play?

[@tommymalloy52]

Do I need to take the screw out for the pilot jet? or can I just pull it out?

[@luedizzleadventures8367]

Great video. Where does that small hose on that other side go?

[@MidNebraskaMotorsports]

I do believe the one you are talking about is a vent tube and will just go down. Thanks for watching. Let us know if there is anything else you need! www.midnebraskamotorsports.com/

[@김수현-g6g1e]

Thank you for the video. 8:40 While cleaning the carburetor, NEEDLE JET accessories were damaged. Do you happen to know how to purchase NEEDLE JET?

[@WitterPC]

Thanks! I have 2007 that I have not started up since then. Now I have a much better idea of what to do.

[@MidNebraskaMotorsports]

Glad we were able to help. Did you get it going?? Thanks for watching. I have a bunch more Honda MC videos coming out. Hit the subscribe button so you get notified!!

[@corneilusanddanashaw9403]

My pilot jet broke off right at the bottom (or top depending on how you look at it) and I cant get it out to replace it. Would it be wise to drill it out or am I now in the market for a new carb? I was going to clean and do a rebuild kit on it, had that ethanol gas sitting in it a little too long and it gummed it all up but now I have this problem.

[@MidNebraskaMotorsports]

Shoot. Sorry about your luck. Yea, you'd be hard pressed to get it drilled out and tapped out without damaging more of the carb. Sounds like it's time for a new carb!! Maybe an upgraded one! Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/

[@4th]

2007 Carb is not like this one - Amazing video though g.

[@MidNebraskaMotorsports]

Interesting. I’ll shoot a video on the newer models. Although, I have been through tons, I haven’t noticed a difference that I can remember. Thanks for the comment! Let us know if there is anything we can help with. Check out: kzbin.info/www/bejne/jmGklXmuoK-chck for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.

[@rickyrickharris4908]

Any tricks to get pilot jet out

[@MidNebraskaMotorsports]

Steady hand with not to much pressure. I have another crf50 carb video that might give you more detail. Make sure to check it out: kzbin.info/www/bejne/jXfKnqGQlrlleac

[@Thisandthatdude]

How do you adjust your throttle cable?

[@mattazzopardi2189]

Very helpful video 👍

[@MidNebraskaMotorsports]

Appreciate the comment Matt!!

[@AaronSForeman]

Great job man. Great content!

[@MidNebraskaMotorsports]

Thank you for watching and the comment. Check out our website if you need parts! www.midnebraskamotorsports.com/

[@desertrider325]

Great video! Thanks. !!!!

[@MidNebraskaMotorsports]

Thank you!! Have you watched our other crf videos yet?

[@s2000pill]

will the pilot jet come out on a 2004 crf50? what year is that carb?

[@MidNebraskaMotorsports]

This was an 05 honda. Yea, same carb! Thanks for watching. I have a bunch more Honda crf videos coming out. Hit the subscribe button so you get notified!!

[@lestervida]

is the 2000 50's the same? if not whats different?

[@MidNebraskaMotorsports]

Yes, same thing!!! Thanks for the question! Hit the subscribe button as we have a lot more videos coming out on this machine. Also, check us out at www.midnebraskamotorsports.com/

[@Andrewlcox1]

Thank you so much! I pulled out my pilot jet or slow jet and it was completely clogged. I tried reaming it with very small gauge wire but got nowhere. I ended up using a blowtorch tip cleaning bit (the very smallest one) and had to twist and twist from both ends to get the clog to open. Now I can see daylight through the tube. I'll report back on how the bike runs once I get it back together. Thanks again!

[@Andrewlcox1]

@@MidNebraskaMotorsports I got the bike running! It will start without the choke now and idles perfectly. Without your tutelage, this 2017 CRF50F would be hard to ride for my 6 and 8 year old. My family owes you a big thanks! Subscribed!

[@MidNebraskaMotorsports]

Love to hear stories like this. Thanks for watching and the sub!! Hope we can help again soon!

[@luisdanielalmanza7949]

Gracias por el video, no encontraba información ! Suscrito!

[@carolina19703]

What if the fuel is dripping out of the air box what is causing that? I took the carb out cleaned it did I miss something?

[@MidNebraskaMotorsports]

Float sticking possibly. Otherwise is your air filter clean?? That can cause the fuel to be sucking back into the air box. Other thing would be valves. More than likely it’s going to float needle tho!!

[@MidNebraskaMotorsports]

Thanks for watching. Can I get an update on your XR? Sorry for the late reply!

[@GoGoGonzo77]

If I take the stock air box off the Xr50r and put a UNI air filter on will I need to rejet the carb? If so what size? Thanks.

[@MidNebraskaMotorsports]

Check your plug but it might be good to go up 1 size. Thanks for watching. I have a bunch more Honda videos coming out. Hit the subscribe button so you get notified!!

[@joshuacarlew4255]

Thank you

[@MidNebraskaMotorsports]

Happy to do it Josh!

[@reddevil331]

My son has an 03 xr50r and I can't get flow through the pilot jet. Tried everything, clean, comp air, jet cleaners. Im stumped. Is there a part # for the 35 x 35 pilot jet you mentioned? I've serched for 2 weeks and no luck. Thanks

[@kingofthecrate]

try a guitar string that you can push thru for the stubborn stuff

[@reddevil331]

@@kingofthecrate I'll give it a try Thanks

[@reddevil331]

@@MidNebraskaMotorsports I appreciate the reply. I'll give it a try thanks.

[@MidNebraskaMotorsports]

Get anything through it??

[@reddevil331]

@@MidNebraskaMotorsports yep nailed it! Just soaked it and a little heat pushed through and running now. Thanks

[@smbmxdirt3427]

What a great video, thanks. My 50 dies at full throttle so I'm sure it's a jet issue. Thanks 🤟😎

[@MidNebraskaMotorsports]

That’s great, thanks! Hope you’ll subscribe and can find other helpful videos!

[@smbmxdirt3427]

@@MidNebraskaMotorsports done!

[@78raarons]

My slide & needle won't slide in or out that easy...... Is it greased or need grease? Also, after getting back together, the throttle won't retract.... & I've tried it all the way down, just barely in... Throttle works fine all the way off the carb..., until i thread it to the top...

[@bbtalber]

78raarons, did you ever figure this out? I have the same problem. The throttle cylinder that houses the needle wont slide down (retract as you say) which makes the throttle cable same too long when you hook it back up. It actually is the travel inside the carb that is messed up. I'm thinking that I smashed the pilot jet when I tried to remove it. I could not get mine to come out and think I may have tried a little too hard to do so. I'm looking for a replacement 35x35 needle valve to try and see if this remedy's my problem. I haven't been back in my garage yet to even see if this theory makes sense. Would love to hear how you solved your issue or have Mid Nebraska Motorsports weigh in here. Thanks!

[@bbtalber]

@midnebraskamotorsports

[@bbtalber]

@Mid Nebraska Motorsports

[@kennethdurbin3385]

Just bought a new 50cc pitbike. Won't idle and smokes when it fires up.

[@MidNebraskaMotorsports]

Hopefully you found this video helpful!! Get it running good? Thanks for watching. I have a bunch more Honda 50 videos coming out. Hit the subscribe button so you get notified!!

[@desertrider325]

How do I measure the float?

[@thatsinteresting7733]

@@MidNebraskaMotorsports at 7:02 you said what the float should be set at. How do you measure that? Thanks

[@jacobseckinger4798]

I can’t get the pilot jet out what should I do.

[@crazybob1954mo]

Just leave the pilot jet in place and clean it with the carb cleaner. Please don't take it out Then BEAT on it like this idiot did while putting it back in.

[@crazybob1954mo]

@@MidNebraskaMotorsports Ha, I Do Have a Clue.... OK, So it is nice of you to make videos and help the less informed.... HOWEVER, Pease Do Not foster bad habits by beating on the jets. As you have mentioned they are quite soft...Treating the jet like you did could cause it to flow less fuel than the manufacturer has Finely machined it to.... That Causes Problems!! Please Do Not Create problems for your followers. Please Be Gentle to Carburetors... OK :) kzbin.info/www/bejne/l5zHeaqfi6trbdU

[@bbtalber]

@@crazybob1954mo , Not trying to add fuel to the flame here. Just trying to figure out what to do next. I believe I damaged my pilot jet trying to take it out. "smashed" shut is my theory. Know where I can get a new pilot jet? Or purchase new carb? If so, where do you recommend purchasing a reliable carb from. I know OEM is high dollar but also don't want generic crap.

[@crazybob1954mo]

@@bbtalber The pilot jet is not a consumer replaceable part. It is a part of the carb body installed by the manufacturer. Consider buying a used carb. The service manual indicates the pilot jet size to be a #35. A #35 jet is equivalent to to .0138" , You could buy a #80 drill bit which is .0135" in diameter. You could then drill out your damaged jet with the #80 drill bit. OR You can search after market CRF50 performance companies and buy an after market carburetor similar to the one in the link I supplied below... OR you could ask the stupid idiot who Instructed you to remove the pilot jet where You can get a replacement....

[@dustyrusty6554]

14:00 fuel air screw adjustment

[@lexxonadventures8755]

How do you know when your air screw is completely seated? Are you suppose to hear the spring on screw while seating it? Thank you

[@krinkledinkle941]

yo mama

[@MidNebraskaMotorsports]

Yo mamma!!

[@fitpro25]

The one thing u didn't bother to explain is now the only problem I have. This is the problem with people who can't teach that make videos. U take something easy to you and assume everyone will just understand when you "check this" but check for what?! Now I gotta go find another video just for this one fkn step u didn't bother to do.

[@MidNebraskaMotorsports]

Seemed like a no brainer to me!!! Jk. Sorry I didn’t cover whatever it is you are needing!! I’ve got 100s of videos ready to be posted. Hit the subscribe button so you are notified when they come out!!

[@facetious_1]

@@MidNebraskaMotorsports ...dang bro...u go through the trouble of walking people through the steps of what you know...and someone completely drags u through the mud. Lol....some people just can't be pleased. . Good enough video for me.

[@markmattingly4065]

I have an 02 xr 50 that constantly drips gas out of the overflow. I'm assuming the carb needs rebuilt?

[@markmattingly4065]

Thanks!

[@MidNebraskaMotorsports]

Yep!! You need a float needle. Sorry I’m late to reply. Have you gotten it figured out??