Extremally helpful very simple, step by step instructions on how to unbox, hook up everything and how to adjust all the modes that need to be installed. Very good tutorial on how to use this machine
@ventilator987 жыл бұрын
For those who need to know how to get into clinical menu, as in the event you need the pressures, or other clinical adjustments, this is your right, and YOUR RESPONSIBILITY to know this, but to get into clinical menu, Press and hold BOTh the Rotary knob, and the RAMP button, until you see the menu, you've got several advanced menus from which t choose.
@jenniferhebb93487 жыл бұрын
Just got my machine and so far your video has helped me figure out the machine usage out of the box the best. Also had question on Flex mode and found the answer in comment section. Thanks for helping me start off right. My machine came via mail and good luck figuring it out.
@robertojperezp Жыл бұрын
Excellent explanation! I'm ready to use my respirotronics machine thanks very much 😀👍
@JohnSmith-uy7sv7 жыл бұрын
My flex mode is locked, can't adjust it. That's dumb. My ramp time was set at 20 minutes at 4. I'll try the humidification on locked tonight to see the difference. The best most thorough video's I've seen so far. I had to download my own manual as they did not give me one yesterday when they brought the machine. In fact they didn't cover much of anything. Thanks.
@mathuetax7 жыл бұрын
This video was very informative. Many thanks!
@juanaplaza6311
Se tiene que inspirar y espirar siempre por la nariz??? pregunto
@AE9x5 жыл бұрын
really appreciate the information. had no clue what to do when they wanted me to switch modems to a similar model. thanks!
@DerogatoryMess4 жыл бұрын
what if a patient complains that any setting over 6 or 7 is too strong? the patient is also on o2 therapy. is there a way to set the device to strictly 6 or 7?
@shazzabelle123
Is there way to extend the time you exhale and inhale? I don't seem to have enough time to breathe in before the pressure drops? And the same when I go to inhale.
@DerogatoryMess4 жыл бұрын
also if a mask of another brand is being used, what do I need to know? I am a medical device delivery technician. and yours is one of the brands we use. however we do not use your tubes or masks.
@BGF_276HUNTERSPO8NTSF6 жыл бұрын
What if I skip a nights therepy, due to feeling unwell? I have lupus, and am not always up to par?
@SedDelMar4 жыл бұрын
Thanks.
@roymeals32557 жыл бұрын
this video was the best of them all. why they do not furnish a book with this information in it I don't know.. I did not know what to ask etc when I first got my machine and they went over it with me. after a few days of use I had questions but not books to explain and I had to call to get more infor and I finally just took my machine in and went over it with the therapist. He was unsure of a couple of things and guestioned why one of my fuctions were set at zero,,, the heat of the water. I told him they told me to reset mine this way when I called the first time and it seems to work fine. Maybve he needs more training on this machine. The first man was good...
@KathyG19603 жыл бұрын
The DreamStation resets it's internal clock every day at noon. Is there a way to change that to reset at another time? I want mine to reset at 3pm due to my sleep habits.
@richcarbanawe98286 жыл бұрын
Hello! How come my cpap dream station machine did not ramp from 6 to11 can you teach me how to operate it in autimatic. The ramp did not change and is their any problem if i refill the water to the tank without taking out in the cpap machine. I always do that everyday for a 4 months now.
@romeojames896 жыл бұрын
What a bout the plastic rubber filter in front of the water tank can it be changed
@bobaldo23395 жыл бұрын
I have been using the PR Dream Station for only a couple weeks, but long enough to make these 2 critical observations:
@jimunger68304 жыл бұрын
Thank you
@alpha29577 жыл бұрын
This video is alright. I thought it was lacked more detailed information. He didn't really go into details of what the various numbered parameters settings entailed. For example he said you can adjust the mask type from x1 to x3. But, what does each setting mean? That would have been very helpful!!!! Instead I'm left wondering WTF does it means? I checked the User Manual, and it's freaking useless as well.