🌎 Miele Dishwasher - DRAIN WON’T STOP (FIXED) 😃

[@hughjohnson-g9m]

1000 thanks for this video 🙏

[@ScottTheFixItGuyChannel]

You are very welcome 😊

[@evangoodell439]

This was EXACTLY my issue! Who would’ve thought a 7-year old video would come to my rescue. Thanks Scott!!

[@ScottTheFixItGuyChannel]

I love it. Thanks Evan👍

[@spunkinator13]

This is the most helpful thing I have found on the internet when it comes to fixing my dishwasher. Here's hoping I can get it going. Thank you!

[@ScottTheFixItGuyChannel]

Thanks so much Spencer

[@spunkinator13]

Update: This absolutely helped me to finally fix my issue. Very excited and relieved. Thanks again!

[@andrew68j]

Thank you so much Scott. Had a sink plug and tried to plunge (needed snake as completely plugged off) and realized water was pushed into dishwasher. Yes, dishwasher stuck in drain mode. Your video solved my issue in 1/2 hour and saved my marriage. Cheers!

[@ScottTheFixItGuyChannel]

Thanks so much Andrew, you’re the Man👍

[@johnwilloughby6339]

Just saved myself $2,000! Thanks mate!!

[@matthewrobison1468]

Thank you very much. Had a repair company come out for my Miele Dishwasher and the repair quote with replacing parts was $375 for the F70 Code. I watched your video and it was a simple piece of broken glass that was clogging the ball bearing. I cleared the blockage and the machine has been running perfect since. Thank you.

[@ScottTheFixItGuyChannel]

That is awesome news Matthew😊😊😊

[@LePoulpe2000]

Thanks Scott, for a clear, exhaustive explanation. After lengthy hours browsing through forums and Quora questions I finally found a solution to my problem! Have a great day

[@ScottTheFixItGuyChannel]

I love it😊

[@sandratoms7973]

Thank you ! This clear helpful video saved us a load of grief. As the guys were watching your video, I was looking for the warranty and wondering how much a new dishwasher will cost. This clear explanation fixed the problem - a piece of broken glass had become wedged exactly as you showed. YOUR TODAY's HERO -- THANKS.

[@ScottTheFixItGuyChannel]

Thanks so much Sandra, I’m so glad it worked 👍

[@ronshoup7752]

We had a more recent Miele G6365 that starting pumping without any controls being pushed. There was little water in the sump. The pullout filter was not clean, but it was also not needing cleaning, in my opinion. The display mentioned "water proof." After seeing this video, I found a grape stem fragment in that ball valve that prevented the ball from seating on the rubber base. Case solved!!! (The manual just said to contact Miele for this error). I was glad to fix this the night before Thanksgiving. You saved me a service call. Your videos are great.

[@PurplePinkRed]

This is the first video I've come across that explains every possible issue that's causing this! Going to try these right now 😊

[@ScottTheFixItGuyChannel]

Thank you, Please tell us how it goes👍

[@PurplePinkRed]

@@ScottTheFixItGuyChannel Mine was as simple as the bottom tray being full of water, and tilting it back. At least my filters are now clean too 😂

[@ScottTheFixItGuyChannel]

Very cool👍

[@cortezoa]

Thanks!

[@ScottTheFixItGuyChannel]

Thank you😊

[@stolarniakartek9051]

Many thanks for this great video!!! I had the same problem with the pump working continuously. I used the sponge to get the water out from the tray, as shown in your video. Water got there through one of the tubes draining the door seal and that's where the leak was. I have cleaned the door seal properly and all is working perfect now. Big thank you for a great money saving video. Best Regards. Luke.

[@VelvetCrone]

A huge thank you for this! (I'll be sending a donation.) I was able to disassemble, clean and solve several of these problems before my partner got home to move the machine so we could unplug it to drain the pan. (I'm 63, not much strength or flexibility anymore). We'll be relocting the electrical outlet. Our problem came after a major sink clog that backed up into the dishwasher when we plunged it (lesson learned). And yes! we didn't have the right config for the disposal hose. I fixed it with a brace to the wall. Interestingly, the One Way Drain Valve had a pressure crack in the top of it, exactly where the clip holds it in place. Small, but enough to cause a geyser-like leak. We'll remedy it with some glue while we wait for the new part to arrive. We have a 21ish year old Platinum G SUA 892. Up til now our only real problem has been the deteriorating racks, which I'm about to replace now that I feel confident this machine will keep working, and/or we can fix what ails it. Thank you again!

[@ScottTheFixItGuyChannel]

Very impressive 😊😊😊 You might try calling Miele USA for the parts.

[@mortnlyng]

You totally helped me fix my problem, it was the water-in-the-pan thing. If it happens again soon, I know know about the spare part. Thanks so much!!!

[@ScottTheFixItGuyChannel]

Great to hear!😊

[@mohsenziaee]

Hi Scott You nailed it! Unfortunately your video didn't come up first on my search and i had to go through two other videos which took a couple of hours to prove that they were irrelevant. Much appreciated

[@ScottTheFixItGuyChannel]

Glad it was helpful!😊😊😊

[@ewoutdegraaf]

Thanks Scott, you are a lifesaver. Been battling with our dishwasher for some time now, sometimes it worked, sometimes it did not. The 'water under the machine' was the problem here. Fixing the pump now.

[@ScottTheFixItGuyChannel]

Awesome news, thank you👍

[@JG-hr7vm]

Thank you SO much! You explained very good and simply, we did all the stages and the problem was solved! Saved a lot of money, frustration and time!

[@stefanprofir]

You realy saved me! With a sponge and a screwdriver I've fixed the dishwasher în 5mins after one week of waiting for a "specialist" ... Big Thank You!

[@ScottTheFixItGuyChannel]

Isn’t that a great feeling?😊

[@pking202]

A clear and concise explanation of a troublesome problem, return of water from sink waste trouble me for months, then woke up this morning to dishwasher going into auto pilot with the scavenging pump flat out all night. Having spent my entire career on four stroke and two stroke engines, I felt an engineer may be needed. Then goggled the condition and came upon you video, can't thank you enough for a detailed and concise explanation, covering not just the repair but prevention measures thrown in too.

[@ScottTheFixItGuyChannel]

You are most welcome 😊

[@vladdobrovolsky7878]

Thank you for taking the time to make this video, very helpful! Our 14 y.o. Miele G2120C kept draining with just power on. Looked at the schematics and it was clear that the overflow sensor got activated, forcing the drain pump to run. However, could never guess that the root cause would be a piece of porcelain that broke off a cup and got stuck in the ball valve causing the overflow, much like in your video. Fixed the problem in 20 min, kudos!

[@ScottTheFixItGuyChannel]

Glad it helped Vlad👍😊 I hope you can also subscribe to our channel with this link: ▶️-Subscribe Here: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2w😊😊😊

[@johnlord5353]

Thank you for this, been trying to sort my dishwasher for two days, fixed it within two minutes after watching your video

[@edmondlefebvre5428]

Thanks Mate! Followed your instructions, fixed the problem, and saved myself lots of money!

[@ScottTheFixItGuyChannel]

You're welcome!

[@seanharper8433]

HI Scott, Thanks! This really sorted out my dishwasher - flooded tray, cleaned up and working perfectly. Just watching for leaks now.Thanks again, Sean

[@ScottTheFixItGuyChannel]

Nice job Sean, The flooding may be occurring due to the drain hose being connected directly to the garbage disposer and when the sink fills up with water, that water flows backward and floods the lower tray of the dishwasher.

[@donaldsutton1846]

Why in the world do manufacturers put screws in such hard to get places??? Yikes. But, the instructions to get to and empty the drain pan worked, so you are fantastic!

[@sukkel0012214214221]

I had tried the first two solutions until I saw this video. The leak was my problem. I tilted my dish washer because replacing the part looks too difficult. Thanks for uploading this (ages ago).

[@ScottTheFixItGuyChannel]

Nicely done 👍

[@toddlerner7527]

Thank you. My water discharge line from dishwasher into the disposer was incorrectly installed. I also found something in the dishwasher impeller. The pan also needed to be drained to deactivate the float valve. Your video was critical to watch.

[@ScottTheFixItGuyChannel]

Nice job Todd👍

[@toddlerner7527]

@@ScottTheFixItGuyChannel Thank you!

[@tylerbaldwin2029]

Thank you very much Scott! Same problem, different Miele DW Model but the walk-through was enough to recognize the issues and solve them thanks to you! As in your Video, I had two of the similar problems, Water in the bottom pan (forcing Styrofoam float up) and the back water steel ball gasket wasn't seated correctly to stop the standing water. You Sir, get a very long Slow Clap!! Thanks.

[@Jakecc1]

Huge thanks! Tried everything until I stambled on your video and for me it was the dripping tray on the bottom, when water comes in it leaks, dont know how I will fix that but until then I can just spogne out the water. Major thanks for the video, you are the best!

[@ScottTheFixItGuyChannel]

Glad it helped!😊 It might have dirty sink water flowing backwards down through the drain line and flooding your Miele👍💻 New Appliance Repair Blog - lots of DIY Fixes for Your Home Appliances - Click Here: ApplianceFixes4You.com

[@markfinter936]

Thanks Scott for taking the time to make these very helpful videos. I was thinking my dishwasher was at the end of it’s life. I tipped it forward and it runs again. Still might have an intake valve leak, but at least I am now aware of what tit might be.

[@jonathansteckel9378]

Super helpful video! Thanks for making it and sharing your knowledge!

[@ScottTheFixItGuyChannel]

You are very welcome 😊😊😊

[@gnowhb]

Worked for my Miele. We had a slow draining kitchen sink which backed up. When running the garbage disposal water began to back up into the dishwasher. Cleared the drain but now dishwasher is not working. But after watching your video, it was water in the bottom tray that was the problem. Soaked it up with a sponge as you recommended and now it's working fine. Thank you!

[@ScottTheFixItGuyChannel]

Thank you

[@skorbs06]

we almost bought a new machine because of this problem but your video helped us fix it and saved us about 1000dollars , thanks!

[@ScottTheFixItGuyChannel]

That is super cool 👍

[@jeremycutting620]

Thanks mate! I had to soak up the tray underneath. Worked a wonder

[@abomallstars]

Awesome! Clearly explained what the owner's guide couldn't

[@ScottTheFixItGuyChannel]

Thank you👍

[@PurplePinkRed]

They do it deliberately so you have to call their repair people!

[@tomh3627]

Just fixed my IKEA dishwasher with the same method of removing the front plate and mopping up about a jugs worth of water. Then blasted it with a hair dryer for good measure. Thank you!!!

[@ScottTheFixItGuyChannel]

Nice job Tom👍

[@thuddiz]

Thank you soooooo much sir! Saved $200 on this!

[@ScottTheFixItGuyChannel]

Excellent, thank you👍

[@larryengelbrecht6704]

And Scotthefixitguy comes yet again to the rescue. Our G 841 SC Plus had a small piece of the edge of a milk glass plate that OCCASIONALLY made the impeller stuck, triggering the intake/drain light. The motor hummed, and only after spinning the impeller in both directions was I able to isolate when it actually stuck again. That's when I saw the glass chip and removed it. How it got past the other screens, I don't know as they contained other broken glass and assorted other trash. Perhaps it slipped in as I removed the sump screen previously and it somehow teetered in that way. Bottom line - it now works flawlessly. Watching the above video, I was able to figure out how to remove it. In a previous Scottthefixitguy video, I was able to modify a cheap metal fork to unfreeze a circulation pump impeller. Thanks yet again, Scott!

[@ScottTheFixItGuyChannel]

Thanks so much Larry👍

[@michaelthorrold7045]

Thank you...saved me a call to the repair guy

[@ScottTheFixItGuyChannel]

That’s what I like to hear😊

[@camojee4396]

Excellent video. clear detailed instructions. very helpful. thank you.

[@madhuvratadasuk]

Great thanks. Managed to repair our NEFF by watching this.

[@damohart6909]

Legend - we thought our 16 year old Miele had finally given up the ghost but all it was was water in the pan. Thanks for the great instructions and for saving us a fortune!

[@ScottTheFixItGuyChannel]

Awesome, Thanks so much Damo👍

[@paul72324]

Very helpful, thanks for including the Bosch brand. Also, thanks for the long term preventative tip. Very detailed and straight forward lesson. I like that you explained the whole system to, to make sense of the problem.

[@ScottTheFixItGuyChannel]

+Paul Mc Alpin Thanks so much Paul

[@GorgeousCorvus]

Dude! Love you!!! Thank you so much for the solve. Mine was water underneath causing the float to rise. Sponged it out and running again. Will monitor for leaking but might be due to not cleaning out the strainer, it was very full of debris. Thanks again!!!

[@ScottTheFixItGuyChannel]

You are most welcome😊 Nice job!

[@GorgeousCorvus]

In the spirit of being thorough I found the problem to be with the screw that secures the top frame of the dishwasher to the cabinets. It came loose and backed-out enough so the head was preventing the dishwasher door from completely closing to create a good seal. A small amount of water was leaking down the seam onto the floor and into the lower section behind the kickplate which was causing the float to continually run the drain cycle. Thanks again for your videos!

[@andygeorgiadis4669]

Scotty, well done, you saved me having to buy a new machine. Good luck and every success in all you do buddy.

[@ScottTheFixItGuyChannel]

Thanks so much Andy👍

[@stevegiali7651]

This was the bomb, fixed mine in 30 minutes. It was the drain pan. I had turned off the water to my home, when turned it back on, drain stayed on. Water was in that lower pan. I did 2 things different than this fellow. I used a micro fiber towel, not a sponge… I was able to stuff it way under in that area. Also I removed to cosmetic front door panel, made everything else easy peasy.

[@ScottTheFixItGuyChannel]

Nice job Steve😊👍

[@mikasurname8596]

Thank you. Perfect fix. Although I have a different model. The bottom tray was filled with water. You saved me a potential hardwood floor replacement. Respect

[@ScottTheFixItGuyChannel]

Thanks Mika, Can you go to scottthefixitguy channel and click the Please Donate button for a Paypal donation of $20.00. Your donation helps me make more videos. Thanks again, Scott

[@Sachaztan]

Awesome video. Pedagogical and down to earth. Saved me a lot of frustration =)

[@ScottTheFixItGuyChannel]

Thanks so much😊😊😊

[@RelateGREAT]

Thank you! The food particle in the sump tip did it! Working like a champ. Mine was a 2017 Samsung dishwasher and it just kept trying to drain and nothing else would work. Fortunately, yours was the first vid that came up and solved my problem easy peasy. Thanks!

[@ScottTheFixItGuyChannel]

Thank you😀

[@markbeasom5252]

Thanks for your prompt reply Scott. I should have mentioned that I did remove that panel and there was no water present. Maybe it's time for a new machine? This one is almost 20 years old. I do like the idea of repairing and reusing but maybe the fix is more than I can handle. Thanks

[@ScottTheFixItGuyChannel]

Thanks Mark, can you send a video of what it’s doing to [e-mail]

[@SwishRecordsInc]

Man you just saved me from a new one . Had no idea mine had a drain pan with a water level switch

[@ScottTheFixItGuyChannel]

Nice job😊👍

[@RobertoMezquiaJr]

Thanks! LG dishwasher, flooded pan. Dried it up and the error went away and it's functioning like normal now.

[@ScottTheFixItGuyChannel]

Awesome, Thank you

[@petvan57]

Thanks Scott. Learned enough to get it resolved. Cheers

[@ScottTheFixItGuyChannel]

Nice Job😊

[@antoniobrito2932]

Many thanks, very useful video.

[@ScottTheFixItGuyChannel]

Thank you

[@davidrobertson606]

Well done helped solve problem

[@ScottTheFixItGuyChannel]

Thank’s So Much David, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: kzbin.info/door/7fBqy8806u1r0NpPv_fQ2wjoin You’ll get Live Appliance help when ever you need it. It’s just $5.00

[@davidryan4491]

Totally and absolutely brilliant fix Scot. Hope the $20 helps you keep up the excellent work mate. I would never have imagined our Miele had a drip tray and micro switch - triggered by a failed sewer pump rather than garbage disposer. Thank you. Didjryan

[@ScottTheFixItGuyChannel]

+David Ryan Thanks so much David😀

[@CHCH-nt5ro]

Thanks so much for this video which is so helpful. I am totally stuck though ! How on earth to I get the white plastic cover off the base panel below the door? My dishwasher is a free standing model with a white, incurved, plastic cover on the front below the door. I can’t find anyway to get it off in order to get the the metal panel behind it. Can anyone help? My 13 year old dishwasher had this issue just before Christmas with the whole family on the doorstep for two weeks…. I was desperate. Hanging the drain pipe higher up as Scott advises in this video solved the problem, my Christmas and my sanity. Thank you SO much.

[@ScottTheFixItGuyChannel]

Can you send a video of that to me at: [e-mail]

[@epale]

Thanks soooo much for your helpful video! Solved the problem of my Miele G651SC.

[@maxspeiser4317]

Thank you so much you saved us a load of money!!! We had exactly the same problem and with your guide it was fixed in no time ! thx great vid

[@ScottTheFixItGuyChannel]

+Max speiser Excellent , Thanks Max

[@ScottTheFixItGuyChannel]

+Max speiser Thanks Max👍

[@clydebaggs7000]

Thanks again. Very informative

[@matimac91]

I had similar issue and I managed to fix my Siemens dishwasher without taking the dishwasher out. Thank you very much! But I have to admin that Miele seams to have much better access then Siemens :p

[@ScottTheFixItGuyChannel]

That’s true 👍

[@jiangzhihao6000]

Thanks Scott! this video helped me solve one time of the problem by removing all the water from the bottom tray, i am wondering if there is any video for the replacement of the rubber seal part as you mentioned in the middle and end of this video. my root cause might be this part as every time i run the dishwasher, there are small amount of water remaining. couple of weeks later, the bottom tray start flooding again. thanks again for the help!

[@ScottTheFixItGuyChannel]

I’ll send you one. The part is called a partition kit.

[@jiangzhihao6000]

@@ScottTheFixItGuyChannel thanks for the name of the part. couldn't find a Canada retailer for this part for a reasonable price as I live in Ontario. i am also trying to figure out what's guide/video for replacing the partition kit? Thanks again for the quick reply!

[@6tttchik]

Thanks for showing how to take that sump out. I read my Miele instruction manual but it wouldn't budge. I was worried about using any force but all it needed was a screwdriver to give it a little push.

[@ScottTheFixItGuyChannel]

Excellent , Thank you

[@avemaria4063]

GOD BLESS YOU!!!!

[@ScottTheFixItGuyChannel]

You are most welcome😊😊😊

[@JayPatel-xe6wz]

Thanks David. Great Vid , keep up the good job.

[@Drzedmolar]

thanks so much. Some of the other videos have you pulling out the whole unit before attempting the simple fix. Thanks again.

[@ScottTheFixItGuyChannel]

Thanks Rob😊

[@jaimedealba6073]

Thank you your video was a lot of help

[@timoteiselajan3114]

Very good

[@nalexiev76]

Great video. Just fixed my BEKO5830 with your help. Thanks

[@ScottTheFixItGuyChannel]

Excellent 😊😊😊

[@gwenvet2]

Scott, This is what happened to mine and your post was the answer! I ran it with dishwashing soap because we ran out of dishwasher pods and it bubbled like crazy and even overflowed the drip pan onto the floor. I removed the kick plate to access the pan, but my Fridigaire Gallery (FGID 2472QF) wasn't as easy as yours was and I had to pull it out a bit and sneak my hand in at the corners. By letting the sponge soak up water multiple times, I removed a small mixing bowl full and the styrofoam float switch disengaged, letting it run again. BTW, before this, the way to reset the (unresponsive ) machine is to press the heat and power buttons at the same time for 10 sec. or so. Unfortunately, the water level was too high to let that work. Now if only I could fix our dead Saab!

[@ScottTheFixItGuyChannel]

Nice work👍🔧⚙️

[@shermansinventory7526]

Great video, thanks

[@ScottTheFixItGuyChannel]

You’re welcome

[@urkyturky]

Thank you so much !!!! You’re great 😊

[@ScottTheFixItGuyChannel]

You are great too😊😊😊

[@bernardmills4575]

Thanks very much. I have a Zanussi model which also has a float in the lower tray. I was getting the problem where the motor kept pumping even though the main sump was empty. On opening the front panel I also found a layer of water in the lower tray which was causing the micro switch to trigger. Once I soaked up the small amount of water using a cloth the problem was fixed. I was almost at the point of purchasing a new machine so many thanks for the video as it solved my problem.

[@ScottTheFixItGuyChannel]

+Bernard Mills Thanks Bernard, thank you

[@Pip2andahalf]

Fantastic video, thank you!! I literally loved everything about your video- from the information to your voice. I haven't even checked yet but I hope you have an epic channelWith loads of videos because I look forward to watching and learning from more of your productions. Gratitude!

[@SJPYT]

Thank you mate.

[@ScottTheFixItGuyChannel]

You're welcome!😊

[@armaghedoncadaverescu9082]

works on gorenje f54 error. Thank you

[@ashokdobariya6567]

Thank you Sir

[@bjartekvalheim8448]

Thank you so much for a really great video. I had exactly the issues to pointed to. The leak under the machine and the stuck piece of plastic in the drainer. You saved my day!

[@ScottTheFixItGuyChannel]

+Bjarte Kvalheim Excellent , Thanks so much👍

[@balmoralwatersportscentere909]

Thank you

[@ScottTheFixItGuyChannel]

You’re welcome😊

[@itzikvil1]

Good video very informative and i want to add something, if tray is filling up doesn't it mean something is leaking and tray will contonue filling in the future and same problem with happen? Need to see why water filled up on bottom of dish wadsher/tray and fix other way rust will ruin dishwasher and will end up doing this sponge routine again and again. Good video thanks for that.

[@ScottTheFixItGuyChannel]

Hi Remi, I would suspect you have a fill valve that is not closing all the way and letting water leak in. It could also be water flowing back from a clog sink through the drain pipe back into the dishwasher.

[@michaelbratti5275]

For my Bosch, the fixes didn't work, but the reason did. So I used the low tech method of tilting the washer forward to drain it. And it worked!!

[@ScottTheFixItGuyChannel]

Very good Michael

[@michaelyohanan8078]

8:02 Scott, do you have a video for if the valve is leaking? Followed all your steps and got my dishwasher working but then the bottom fills with water again and the pump keeps trying to run. I’m going to assume it’s the valve you mention at 8 minutes.

[@ScottTheFixItGuyChannel]

Thanks Michael, does it look like the dishwasher fills up with water even when it’s off?

[@michaelyohanan8078]

@@ScottTheFixItGuyChannel No. I would say, after every 3-4 runs of the dishwasher, I have to turn off electric and soak up the water in the drip pan.

[@ScottTheFixItGuyChannel]

Hi Michael, I think you have a leaking partition seal on the circulation pump. You can order a new partition kit for your pump by calling Miele USA.

[@BlakSand]

Thank you, it was very useful video!

[@PerformanceTrimaran]

Great job, keep making videos. :)

[@catherine_davidlyder4794]

Hi Scot - this was a very useful video. Many thanks. You also show a rubber seal that may be torn that requires a little more work but isn't too bad to replace - do you have a video to do this?

[@ScottTheFixItGuyChannel]

Thanks so much you guys, Can you go to scottthefixitguy channel and click the Please Donate button for a Paypal donation of $20.00. Your donation helps me make more videos. That bottom seal is pretty hard to replace and very rarely leaks. Thanks again, Scott

[@markbeasom5252]

Hi Scott the fixit guy. I have done three of the possible fixes I learned from you watching your videos but the Intake/Drain blinking light keeps coming back on. I replaced the water inlet valve per your instructions and checked the one way valve in the sump for debris. I also checked the drain line to make sure it is above the disposal connection. Ours is a Miele 2003 G 892-SC Touchtronic. Maybe it's just time for a new machine? I have not taken the machine out from under the counter, turned it on its side and removed the circulation pump. Any thoughts would be appreciated.

[@ScottTheFixItGuyChannel]

Thanks Mark, Can you check this manual for the diagnostic tests? f01.justanswer.com/smitty1486/b4cbc5bd-5d71-41a1-915d-6756edc3bc8a_G600+%26+800+Miele+Service+Manual.pdf

[@MegaBlume77]

Many thanks. Thank you for you efford

[@ВалентинаЗ-ж1и]

Thank you, man! It helped us indeed.

[@ScottTheFixItGuyChannel]

+Валентина З. Excellent, Thank you

[@dliu8037]

Hello , how did u take the rubber seal around 8:00 in your video out? i do have a leakage problem, i think this is the root cause

[@jacolley]

saved me a few £s thanks a lot

[@rebeccaszeto5708]

Do you have a video for a Miele Diamante dishwasher that won't turn off, buttons unresponsive and started on its own with no one near it to push any buttons by accident. Tried to plug and unplug, but it just picks up where it left off, door open or closed When I open, a little "fountain" is percolating in the location of where the pump would be.

[@smurfiennes]

Mine is the other way around. Program is run as it should. Water is pumped out properly, but after 4-5 days water seeping back again into the diahwasher. I’ve replaced the non return valve (15 years old), but the problem still exists. Should I also replace the square part as well (sump?)?

[@ScottTheFixItGuyChannel]

Just need a new fill valve. Yours is letting a little water leak in.

[@Senja65]

Thank you!!! 👍

[@ScottTheFixItGuyChannel]

+Morten Kristoffersen You’re most welcome👍

[@markbeasom5252]

I should have added, the rinse cycle and light will not go off. It's continually rinsing. Thanks again

[@ScottTheFixItGuyChannel]

Thanks Mark, I think you have water in the tray below the dishwasher. Just need to unplug it, remove the panel below the door and then remove the panel below that and sponge out all the water.

[@RoeyShachar1]

Thanks for the great video. This is exactly the problem i had and with your help i fixed it. Thanks for sharing.

[@winthropdc1]

Hi Scott. I had already cleaned the filter and non-return ball valve. So I pulled the unit out and took off the side panels. The lower tray was wet so I booked a service call. After watching this video and helping me identify the lower tray float, I sucked 600ml of water out with a large syringe and the unit is working again. I could not see any leaks so I am not sure how the water got into the lower tray. I am going to try and dry the lower tray entirely so then I can see where drips are coming from. OK... there is a small plastic pipe at the bottom, front, right and it was dribbling continuously during one part of the washing cycle. To close the loop. The pipe in question captures leakage from the door seal. I cleaned all the seals around the door and now there is no leak, no overflow sensor being triggered and the drain pump stops as expected. The dishwasher has been re-assembled and moved back under the benchtop. I will be cancelling the service call now. Thanks

[@suesmall1175]

I have just got error F20 on my washing machine what do I have to do now

[@Mr.Fantastic1187]

Hello! I have a question about my Miele dishwasher. When I turn it on to run a cycle it starts running and I hear the draining. After that there is just a motor sound and the intake/drain light starts flashing. Any ideas or thoughts?

[@ScottTheFixItGuyChannel]

Hi Griffin, Can you contact me at [e-mail] and send me a video of what you noticed?

[@michalpiotrpanasiuk6214]

Thanks dude...Got it fixed :)

[@ScottTheFixItGuyChannel]

+Michal Piotr Panasiuk Very Good👍

[@deryckhayhoe2146]

Hi Scott Great video, however I thing my problem with water in the tray is a leak, maybe that rubber seal you touched on. What do I have to do to get access to that? My particular model is free standing. Thanks, Deryck

[@ScottTheFixItGuyChannel]

+Deryck Hayhoe You turn the unit upside down and remove the four screws that are holding the bottom plate and then you have to remove all of the connections to the motor and then remove circulation motor. I think the rubber part is called the impeller partition housing.

[@Buykai]

Once any wash cycle is chosen (on my Miele Incognito), and door closed, drain starts and does not stop. The metal ball in the check valve is clear and no water in the pan. Pulled dishwasher out to try to see if there's a stuck float but can't find it.

[@ScottTheFixItGuyChannel]

+Buykai I just fixed one yesterday . I pulled it out and removed the bottom plate and removed the styrofoam float from inside its plastic case and found the microswitch stuck. I flipped the float upside down and put it back together . That fixed it.