Miller Dynasty® and Maxstar® TIG Welder Set-up and Operation

Learn about the features and functionality of the front panels on the Dynasty® and Maxstar® TIG welding products. Also included are the basic guidelines for how- to set parameters to help improve welding results. For more information on Miller TIG welders, visit www.millerwelds...

[@anilrotory4life57]

This is the most comprehensive tutorial i have ever seen. Thank you Miller

[@bakabaka2061]

I used these machine in the nuclear industry. Best machines I have every used to weld pipe and alloys.

[@mark23487]

Excellent video! Lots of good info and Brent has a great delivery. Nice clear voice and a perfect speaking speed.

[@stefanczechorskidds5536]

Thank you! Great review of the basics and explanation of the Pulser settings.

[@noahharder885]

Oh, that old professor Williams is at it again.

[@djevans37075]

"Miller" - Thanks you! - Very good instructional video

[@alexakisbros]

The bwst welding machines ever. I am the distributor of Greece and i am very glad to sell this machines.

[@margaritoramirez1557]

Hey Bryan thanks for this video, was very helpful and I really enjoyed thanks again. God bless you 🙏😇❣️

[@nguyenvanquynguyenvanquy5039]

Sao trang bán hàng này không kêu cty này sang vietnam và sản xuất máy móc cơ khí này .và máy hàn và các loại máy chuyên ngành về cơ khí nhỉ

[@MillerWelders]

Please email us at [e-mail] for inquiries outside the United States and Canada.

[@302ECKO]

I have a working interview tomorrow welding aluminum pipe. I’ve done it before but I still feel nervous. Dream job here I come! 🤞

[@MillerWelders]

Good luck Jose!

[@302ECKO]

I got the job! 🥳 Took the weld test Thursday and it’s been a painful wait not knowing till today they gave me a call and I start on Monday.

[@Weldhapi]

This helped me alot for tuning my miller synchrowave 350 LX for aluminum

[@Yashiro-nene_dies]

Someone give this guy a sharpie.

[@user-vj4ll6kh5c]

The best video I've ever seen ! THANKS 🤝🏼

[@MillerWelders]

Glad you liked it!

[@MAC_6.7]

The comments on the eyebrows are savage lol

[@ausfox1964]

I have just one question. If I buy this machine, will I too end up with Spock eyebrows ?

[@Jeus-h3o]

hahahahahah

[@MillerWelders]

+Jrod R Thanks for the question. You might need to check the machine you are welding with. For inverter-based machines Tungsten "balling" may be created if you are using pure Tungsten (it is the green-banded Tungsten). This type is not recommended for inverter-based machines (like the Miller Dynasty or Maxstar machine). Instead, we would recommend a 2% Ceriated Tungsten. The cracking you are experiencing may be the result of the base metal and filler material being used -- you may simply need a filler metal with more ductility. Check out the following chart to better match the base and filler metals: www.hobartbrothers.com/download/detail/aluminum_filler_metal_selection_chart/491.html. Hope this helps!

[@CamdalftheGreat]

This is my professor! Ferris State University

[@gregoryz6545]

Thanks for the good information. Wear a hood when starting a torch next time though.

[@jimj3997]

he uses the new Miller arcbrow syncrofade with facial recognition

[@SOLDOZER]

Does Miller make eyebrow tweezers too?

[@imbrandon16]

yes, and this guy was running his way too hot.

[@SuperDanger63]

Now that I read your post this Video has gotten a lot more entertaining! :-)

[@2012CHR2012]

I have viewed this video a few times and have taken notes on this welder. I am an ornamental aluminum welder. I am using this welder and I am learning a lot from this on how to better my performance at work! I keep getting a balled tungsten so I had to watch the video again. took notes and will try it tomorrow. I also took notes on pulser control. I need my welds to look sweet! people will see them on some of the hand rails we do. otherwise most of the welds are hidden from view. or ground smooth.. so I have to have good penetration!! so I am wondering if the pulser will help. not everything is breaking after they grind it all away but the heat from powder-coating causes the aluminum to warp i guess and some of my shit has cracked. but only a few it's not always! I'm not that bad of a welder. but, if I can be rid of that I'll be good and confident. we also do a lot of outside corner welds so again I took notes on waveshape...

[@solomongreen6655]

You almost always want to start welding aluminum with a pre balled up looking shape ground tungsten anyway, hence why its balling up on you because it should already be that shape from a fresh start of an aluminum (only aluminum though not an intended tungsten shape grind for any other metals) weld or tack. But yes the electrode type makes a world of difference. Try a pre ball shaped tungsten grind when striking your next arc. It throws a better arc in my humble opinion. KZbin is one of your best friends when learning almost anything. Good luck mate!

[@MillerWelders]

I've found an answer for you, but I'm afraid the explanation isn't possible in this tight space. Please send an email to youtube [at] millerwelds and I'll be glad to share step-by-step tips from the product manager.

[@hugos8885]

On my 300 DX I can set how many amps the HF uses to start the arc by pressing the HF start button and the Lift Arc buttons while switching the machine on. This setting can be as low as 1 amp. This is different from the Initial Amp setting on the front panel which can go as low as 5 amps. Can you explain the difference? Also, can you explain the 4T for mini logic control?

[@nguyenvanquynguyenvanquy5039]

Sang vietnam mà mở cty và bán ở vietnam và cho các nước châu á thì ok

[@kochj0713]

@Andy205ro Never a great time to get a welder....Just like computers... The Dynasty series are the best out there for welding Alum. can't be beat... Buy what you need...and get what you want...

[@ARCSTREAMS]

you did not cover the en ep settings? those are important and most useful features

[@jacsonmei9264]

Toi muôn mua cua các ban một may vua han được tic vua han được co2 loại 350 các ban ban bao nhiêu tiên mot may mong dc hoi đáp xin cam on ban video rất hay

[@subhasbiswas2381]

Suppose i setup balance control after that how to go back i mean to say which bottom i have to use for that

[@MillerWelders]

You can press the amperage button to get out of the balance selection. Let us know if you have any other questions.

[@derekcollins1972]

When did Lincoln start to make blue machines?

[@Andy205ro]

Who knows when first (what year) dynasty200DX appear ,I intend to buy one and maybe Miller release new model

[@shexdensmore]

hi, i need to know how to adjust the hot start on the Dynasty 350 for SMAW.

[@Tonys_Podium]

Could you guys please do a video on the Miller Mpi 220?

[@JAYCFX]

Why are some welders not available or have different names in Europe? Like the Migmatic 250 (Europe) vs the magmatic 252 (USA) the 250 doesn't even have digital display. The reason I ask is I was looking at a Miller mpi220p Multi process welder but can't find it on your website. It cost €1850 in Europe and as you know that's a lot of cash. Does it have something to do with the tax system??

[@charlesgauldin8010]

Thank you sir

[@OMGWUNSIU]

Very informative.

[@ablayendoye9617]

Tanks for this video

[@bertito7777]

Wow! Increible

[@africantwin173]

When does Miller gonna lower there prices in Europe on those tig inverters. also re design a low noise coolmate coolers. Everlast tig machine cost less than €€€ Miller.

[@imbrandon16]

we have an everlast 180 at work... it's garbage... it used to be "ok" but now its poop.

[@elicarter4165]

How would you setup air-carbon arc gouging/cutting ?

[@mohdamanuddinshakeel9318]

Hi sir pls send me link how to connect gass cylender vedio

[@markchovancak432]

i have a maxstar350, is it possible to convert it to the dynasty 350?

[@samhalbert19]

what happened to his eyebrows.

[@garrettmesser3977]

Women

[@davidjohnson4682]

don t know how you got you mig gun by ul hard to think about my work because always need to think about putting the gun down with starting it up or running wire all over also unsafe ilike the gun on my plaze it has never started up on its own. also the ground clamp on my battery is better than on my miller welder

[@kwegyiraggreyemmanuel9888]

am much interested in this video keep sending me more of this

[@cdavis9935]

long time no comments! Hello Miller, I have a few years into the trade and comfortable in it. S/GMAW. Though I just acquired my first welder. It is a Miller Gold Star 652. I have a pfd of all the features, but upon finding this video I have a concern. I will soon be putting it to work on heavywall aluminum, (I hope.) I say I hope after hearing you say aluminum is AC only. The aluminum parts will be done with tig, will my welder do the job? Thanks in advance!

[@cdavis9935]

and if you have one around, maybe a vid for the tig set up with my New to me welder!

[@MillerWelders]

+anotherpersons namehere Thanks for reaching out and congratulations on your first welder! The Gold Star 652 can do some DC TIG welding at high amperage (>100 A). Aluminum requires the AC TIG process. Unfortunately, the Gold Star 652 is not a fit for AC TIG welding. It is best suited for Stick welding and carbon arc gouging. We recommend a Dynasty or Syncrowave for AC TIG welding or a Millermatic with a spool gun for MIG welding. We hope this helps. Please let us know if you have any further questions. Thank you!

[@cdavis9935]

+Miller Welders while I agree with you, I don't have that kind of money. I have been doing some legwork in additional parts...is there some kind of addition I can purchase to add this to my welder?

[@MillerWelders]

+anotherpersons namehere Unfortunately, there isn't an addition to the Gold Star 652. You will need a machine with AC Tig capabilities (like the Dynasty or Syncrowave). Please let us know if you have any further questions. Thank you!

[@TKTK-sw3tq]

C Davis lincoln makes a cheap ac tig welder, the square wave 200. It's $1,500 and has a very good amperage range. The skill cap or how high the machine can take you is almost limitless. There was a person that's gone to a welding competition on a square wave. Welding tips and tricks did a video on it i think. Esab also has an ac tig for $1,100 but i'd save a bit and go for the lincoln if i were you. Yeah thats right screw you miller for not making affordable ac tig welders.

[@jacsonmei9264]

Miller bao nhieu tien mot may han da nang cua cac ban vay

[@aleneskikalashnikova4570]

What are the advantages and disadvantages between Dynasty 210 and 210 DX? Thanks.

[@MillerWelders]

Thanks for reaching out. The Dynasty 210 provides essential TIG and Stick functions and provides operator-friendly, menu-driven features. The Dynasty 210 DX offers full AC features, including advanced waveforms and wide ranges of balance and frequency.

[@africantwin173]

Aleneski Kalashnikova look for a Italian Everlast tig welding machine on Amazon. There water coolers are also cheaper.

[@MrAdamNTProtester]

@@africantwin173 I too look to the comment sections for key information on all my major work related machine purchases!

[@bluehornet6752]

Also, the 210 DX has longer duty cycles than the straight 210. Whether or not this is a good thing is up to the buyer, I suppose.

[@metalurgicaleandro3222]

tem representante no Brasil

[@thehegt]

Miller Dynasty Code ( Help 31 ) what is that ?

[@MillerWelders]

+thehegt Tr Thanks for reaching out! These are defined in the Owner's Manual. The Help 31 Display indicates a malfunction in the primary power circuit caused by an overcurrent condition in the primary IGBT switching circuit. It is recommended that you contact a Factory Authorized Service Agent if this display is shown. Please let us know if you have any further questions. Thank you!

[@Andy205ro]

is possible to buy dynasty200DX CE ROHS from US ? in Europe is in 5K $ range

[@nungujunior8286]

❤❤❤❤❤

[@marcusharley3064]

Be careful when lighting a cutting torch, hold it away from your face!

[@oj8430]

Oh i'm sorry i thought you pointed it directly at you face making sure you can smell the acetylene before using the striker to light it off. I make sure that i always have a 4000 degree torch pointed at my face when striking it off.

[@andrewmitchell2189]

do you speak from experience?

[@chrishevia]

Because he has little to no eyebrows. 🤣🤣

[@marcusharley3064]

@@chrishevia Maybe he's a tranny at night, lmao.

[@abdulhamidsalman7961]

There is no videos for Dynasty 280

[@MillerWelders]

Hi Abdulhamid, we would recommend checking out this video: kzbin.info/www/bejne/j5fTo5qoi7uhhKs. Let us know with any additional questions!

[@alshaardody2353]

i want to how setting weld

[@jrmlotus]

Is this an old machine?

[@MillerWelders]

jrmlotus To find product features, specifications, accessories and pricing, visit: www.millerwelds.com/products/tig/ - Please let us know if you have any further questions.

[@dufffg5247]

Very striking facial character

[@OmarUnikel]

I preffer Everlast 355ext

[@JesseWright68]

$700 for the cart? Makes me wonder if the machine is similarly overpriced.

[@Havoc4Hire]

it is

[@imbrandon16]

If you just bought a welder... build your own cart lol...

[@user-sy5ij4ij3x]

請問RMD美國售價多少

[@МединаСундет]

👍👍👍👍

[@jrmlotus]

Look at kemppi welders

[@winstonsilva7342]

my dreams is a dynasty or some thing chinese to welding aluminun...

[@janirajaquessjaques1680]

PLASMA BASE TELESCOPICA

[@janirajaquessjaques1680]

PONTI MAK AMARAL PEIXOTO

[@janirajaquessjaques1680]

FORD 3222 FACE816

[@janirajaquessjaques1680]

700 TIG🗜️💻🏧💰