Miller Welder - Millermatic 210 - poor welds - liner replacement

Miller welder liner replacement due to liner failure.
Millermatic 210
Miller Liner part number 194011
Amazon link:
www.amazon.com...
Thanks for watching
Cheers
--J

[@ralphwatten2426]

I've been welding .028 wire with my Miller Millermatic 210 for close to 15 years. I couldn't figure out why the wire was all over the place and sparking up inside the tip. I found out that there's different sizes of liners. My Millermatic came with a .030/.035 liner. Light came on. I've got a .028 liner and I'm going to replace it per this KZbin video. Thanks for the nice concise video on liner replacement for my welder.

[@LS11971]

My Miller 210 has always had feeding issues, turns out mine is 3/8" short and has the same slop yours did. Thanks for the video.

[@PAYNEKILLER..]

Thanks for making this

[@JohnnysSpeedShop]

Any time

[@35goonyboy]

Thank you very much. !! Ordered a couple extra liners for stock. Very good video BTW, just short and sweet

[@JohnnysSpeedShop]

Cheers

[@thebanjoman1963]

Good video, I always take a black binder clip and a piece of blue shop rag and put it on the wire before it feeds into the lrrollers and iner. It helps 'wipe' the wire clean before going into the liner so dust and dirt doesn't get 'shoved' into the liner itself. Worked well for years.

[@JohnnysSpeedShop]

That's a great idea.... cheers mate...😁😁

[@TheGibby3340]

Most guys take extreme pride in the quality of their welds. I can see how the unpredictability of that defect would be really frustrating. Satisfying fix I am sure. Cheers "John".

[@JohnnysSpeedShop]

Yeah Ian, it was tough with that old liner for sure, and the replacement was cheap enough @ $34 so i'd say it's a yearly maintenance item at that cost.... I still won't change it until it breaks again .. lol

[@lukehewitt5865]

Thank you very much for this video! It was extremely helpful and very well done!

[@JohnnysSpeedShop]

Glad you enjoyed it!

[@joell439]

Thanks for the tutorial 👍😎👍

[@mechanicmatt871]

I like your MIG flash light, never seen that before.

[@JohnnysSpeedShop]

Don't buy it Matt, it's called the "Mag Lite" it's not worth it, super cheaply made, worth a few quid, not the 25 I spent on it :)

[@felixleeo89muy65]

I've been having trouble with mine. Keeps melting wire to tip. Burnback. After watching video I checked mine. Liner is just like yours. Wire has a bunch of slack in it. Going to order new liner and hope that fixes it! What would cause liner to get short like that?

[@JohnnysSpeedShop]

They ware out over time for sure... this machine was almost 30 years old.. 😳

[@SteveRobReviews]

Datsanice , back in business. The punch holes you filled in looked about 10mm , is that from a pneumatic hole punch ?

[@JohnnysSpeedShop]

Yes mate, that's from my Astro hole punch it's the 5mm one, camera make everything look bigger (including me) lol

[@JuanMRodriguez-x3o]

Do u pull the liner in before cutting iy

[@greatsoutherntrendkill79]

When that happens its not the integrity of the liner it’s definitely the liner in a bind. All I do is grab the gun and shake it a good bit and then mash the trigger but not to weld just jog wire out. I promise it will solve the issue. Also don’t weld when the lead is in a loop. Long curves are okay but straightest is bestest.

[@JohnnysSpeedShop]

Still needed changed....🤣🤣🤣🤣

[@bobd.fletcherjr4912]

👍👍👍👍👍👍👍👍👍

[@Ransome2501]

Next time unscrew you’re gas defuser remove the the set screw and leave the set screw on the Allen wrench then stretch out your gun while it’s still attached to machine. Rotate the gun clockwise or counterclockwise which ever way forces the liner out. Screw gas defuser back in looking through the set screw hole insuring that the liner has passed the set screw hole then re attach set screw. Done

[@billdarland7770]

I was wondering if anybody caught this !!!

[@richardpagan3153]

very strange cuz I have a machine I hardly ever I am learning I thought it was me why my welding looks so bad I have tried a lot of things .Millermatic 211 i have I put it away and bought another one TITANIUM Easy-Flux 125 Amp Welder 159.00 i pay on sale practicing a lot with this machine oh I saw the welding very good titanium welding . so I figured something is wrong with the Millermatic 211 my welding was coming out like crap I try all settings maybe I'll change the liner and see if my welding comes out good for the miller i pay lot money for the welder cause my welding on it look like doo doo .

[@ronaldmorales4890]

Amigo quiero saber como darle mantenimiento a la misma maleta en sí

[@JuanMRodriguez-x3o]

Shud have any play before i cut ot

[@davidbuckley3020]

When did you leave the north?

[@JohnnysSpeedShop]

Ohhhh over 20 years ago now mate.....

[@davidbuckley3020]

Moved to Washington state about 8 years ago from Crossgar , co down. Bought a 252 and was having trouble with the liner and came across your video. 👍

[@JohnnysSpeedShop]

@@davidbuckley3020 aghhh. Crossgar...I know it very very well...I did my apprenticeship at Bells back in the late 90s... WA man...not too much of a weather difference for you...😁 lots of 💦💦

[@davidbuckley3020]

@@JohnnysSpeedShop not as bad as they make out. 😉 Where are you ?

[@JohnnysSpeedShop]

Just south of Charlotte NC... was in Boston for 10 years..dont miss that snow one bit...lol...

[@greatsoutherntrendkill79]

Buy a Gilliland Mig Gun. I promise you will never buy another gun, EVER.

[@JuanMRodriguez-x3o]

Or pull it all the way out and cut 3/4 "