Milwaukee Packout 3 Drawer. Socket Drawer

[@spevakdesigns]

Nice setup there! Cleanest and most compact socket storage I've seen for the packout. I made some heavy duty dividers for mine out of 1/8" aluminum and think it worked out well. For compact wrench storage i really like the DIY coiled wire wrench racks.

[@JMSAudioSTL]

Thanks man appreciate it

[@bigrig607]

Sick set up, totally gonna copy!

[@JMSAudioSTL]

Thanks man. Go for it

[@robertgreen79]

Fantastic solution. This is the first real option I’ve seen for sockets without costing a ton. I’m going to play with an idea this gives me for the extensions. A socket rail on a small piece of angle aluminum might work.

[@JMSAudioSTL]

Yeah I’m thinking on finding something that I can put between the rails I have now that the extensions can clip onto or magnetic to

[@Fight284life]

Great ideas, Thanks for the video

[@JMSAudioSTL]

No problem. Hope your build goes great

[@locogperro]

Nice I was thinking of doing the same thing but I was gonna do foam but I originally wanted to do that you did. Seeing how yours is set up I might go back to my original idea

[@frankenstienrob5579]

Thank you 🙏🏻 the force is strong with this one 💪🏻 great idea it works so well for my packout

[@JMSAudioSTL]

No problem. I’m glad it works for you.

[@speedster-qe1nj]

My car set up is similar for wrenches I just went with the tekton wrench organizers that roll up. It was the best I came up with for the size

[@JMSAudioSTL]

Nice. Love it. Appreciate the comment

[@captfallout7416]

Thank you for this vid want to do the exact same thing with the kobalt set 👌

[@JMSAudioSTL]

No problem. Appreciate it. Go for it. It’s fun to do man. If need any tips on packout stuff. Don’t hesitate to comment back.

[@suelo9087]

Recently got an apartment so I don’t have much space for tools, but might add this pack out specifically for my sockets, pretty cool man!

[@JMSAudioSTL]

Thanks man. If need anything else just reach out

[@erichumphrey3681]

Basically nice😊

[@JMSAudioSTL]

@@erichumphrey3681 basically it works and thanks for comment

[@fivestander]

Man, thank you for the video! I have the same socket set and was just thinking I need to transfer them to my packouts! Great work! Would love to see the ratchet/wrench setup you have!

[@JMSAudioSTL]

No problem man. Hope your build went great

[@JMSAudioSTL]

About to upload the wrench video.

[@canopygardensgreenhouse9907]

I'm looking at doing the same thing. I have the olsa brand trays, same thing. In dewalt drawers. Bought them before Milwaukee came out with drawers. I was bummed to see the trays wouldn't fit. Thinking about switching because Milwaukee has floor mounts and better options. Going to attached the floor mounts to a garden cart, for off roading around the farm.

[@JMSAudioSTL]

Do it. You’ll love it.

[@cvau_]

@@JMSAudioSTL how tall is your tallest deep socket for 1/2"?

[@JMSAudioSTL]

@@cvau_ hey thanks for messaging. They are 3”

[@1windozesuk]

Nice. Now how can we add a top handle, preferably folding

[@JMSAudioSTL]

@@1windozesuk thanks handle on the sockets ?

[@laggerwerks710]

Great idea screwing them in, seems pretty harmless. I don’t think id sacrifice a drawer by cutting it up though, I would just cut the socket rail shorter. I was really contemplating on buying the Packout ratchet set because I hate how things just float around in the drawers. Thanks for this

[@JMSAudioSTL]

Yeah. Trial and error. I now look back like yeah I should of but it works. I will have more videos out for more

[@rogerpedrosa1854]

That's cool👊

[@JMSAudioSTL]

Thanks. I appreciate it

[@keystoadventure8816]

So I’m thinking of doing similar but mounting my rails the other way (front to back) and screwing them down. As I could fit way more rails that way. How well has yours held up?

[@JMSAudioSTL]

It’s holding up really well. It just sits in back of the truck and I just pull it out. If I need to roll it in. It’s easy also

[@oregongoldhunter]

Excellent video brother

[@JMSAudioSTL]

Thanks

[@panchampatel1]

when will ratchet/wrench setup video come out?

[@JMSAudioSTL]

I’m actually going to work on it today. Have some other stuff to cut today also

[@yopeople70]

Very nice system. Looking to get something similar myself. Do you have enough height in the 3 drawer box to fit deep well sockets? I see you have some in there, but I'm not sure how close those are to hitting the bottom of the middle drawer.

[@JMSAudioSTL]

Hey if do deep well sockets the top edge of each drawer will need to be trimmed to fit. I deep are the sockets? I could measure mine

[@jessihawkins9116]

@@JMSAudioSTL or you could take an angle grinder and make the sockets a bit shorter so they fit 🤔

[@JMSAudioSTL]

@@jessihawkins9116 wait cut my sockets. Nope. Cutting plastic is easier

[@wranefis]

i was expecting milwaukee sockets lol

[@JMSAudioSTL]

Yeah me too. But I would use the packout case for them.

[@michaelrreeves]

that socket rail isn't available to you have an alternative?

[@JMSAudioSTL]

You can make it however you build yours. This just was best option for me

[@michaelrreeves]

@@JMSAudioSTL how long was the socket organizer it says 17.3 but the drawers are 16.2

[@JMSAudioSTL]

@@michaelrreeves you have to cut the metal backing down to fit. Also in the drawer those plastic tabs that hood the dividers need to me shaved off

[@lowvoltagedude7837]

🔥🔥🔥🍻

[@JMSAudioSTL]

Thanks

[@brianmacbeth1315]

Hows the socket tray holding up so far?

[@JMSAudioSTL]

Good. No complaints

[@CenturionSuperCrewCab]

Do you still have that old kobalt case

[@JMSAudioSTL]

Hey unfortunately they were thrown out that night

[@josealvarez7065]

How strong is it the packout with all the sockets in it

[@JMSAudioSTL]

Don’t see no difference. Picking it up and all. Nothing coming apart

[@josealvarez7065]

@JMS AUDIO STL thanks

[@spevakdesigns]

I have a 3 drawer loaded up at about 100lb. It's not happy about it as the bottom of the two heaviest drawers sag a bit but I've been using it like that for a year and all the drawers still work fine.

[@paulcolburn1208]

Cant hear you.

[@JMSAudioSTL]

Just listened and it works

[@jo-vf7rc]

This Is not the only video review of this product on KZbin

[@JMSAudioSTL]

@@jo-vf7rc I know others have videos of this product also. So don’t know where that comment came from. Thanks for the comment

[@jo-vf7rc]

I f you can't here what it is he's got to say well you could check out one of the other videos on the subject

[@jo-vf7rc]

I do apologize to anyone that wasn't aware that the comment was for Paul

[@jimmywells33]

Um. Um. Um. Um. Um. Um. Um. Um. Um. Um. Um. Um. Can you say it one more time?! UM!

[@JMSAudioSTL]

Um. Um. UM. UM. Yes I can 😂 Thanks for watching