DIY: How to apply Epoxy to a Wine Glass

[@doreenrodriguez3359]

I'm new to your videos and I have to say, your work is absolutely gorgeous. Thank you for sharing your talent. You've got me motivated to continue with my business...thank you ...

[@lindseyjacobs8305]

I feel like she's inspired and raised a whole generation of tumbler makers 😍

[@theresabattaglia-palma255]

Omg you are so amazing!! I was in a trance watching you and listening to your music. I wasn't looking for another craft to do, But I really want to try this. Thank you

[@1961OLDSCHOOL]

Great Vid. my account autoplayed your epoxy application video and when I came in from workin' outside your vid was at the part where you were describing air bubbles and or the prevention of getting them in your piece of art. Helpful tip, have a small hand torch close by and once complete with your application of the liquid ep. graze/paint the torch flame over anywhere the liquid was applied and the flame will draw up/out any air bubbles. Be well and keep crafting in a positive light.

[@MinderellaCreations]

Thanks! I have actually purchased a propane torch and have been using that now...it did help a lot! Appreciate the feedback!

[@carla.barros]

I'm from Brazil, Manaus!! And you are wonderful!!! I'm going to start working fszrndo these cups, you are helping me a lot!!! Thanks

[@MinderellaCreations]

Awesome! Hello from Kansas USA 😊

[@BogArt1]

Love your Art, and your music choice.❤

[@MinderellaCreations]

Thank you!

[@LorieWitt]

Your such a great teacher, thank you!!!

[@nancyhdezpr]

I like your work. Looks simple. I'm new and be motivated. Congrats and thanks for share your talent with us.

[@Reag713]

I was so mad I couldn't do epoxy on glass but now I'm so happy 😁

[@MinderellaCreations]

Oh good!! Hope it turns out amazing!

[@galady8632]

I have been crazy busy for far too long - I have certainly missed your videos! Very informative, entertaining and relaxing. As always, thank you for a job well done!!

[@MinderellaCreations]

faye austin Thank you Faye! 😘

[@heidymartinez4991]

Thank you so much it helped me a lot and a better understanding of how epoxy works

[@myrnabalderas954]

You’re so awesome. Love your music.

[@Tish2557]

ok thank you love your creations

[@mariafrendo3981]

Love the music in the back ground

[@danylmccormick9089]

Ty so much for this video! I have been struggling how to get the epoxy on my glasses and this was SO helpful!

[@MinderellaCreations]

Awesome! Glad to hear it helped!

[@jenniferscott9823]

Very beautiful work! Love the music too😍

[@klgm63]

Love the music

[@MinderellaCreations]

Thanks!

[@Lex-by5jz]

Ayyyyy I hear that casting crowns in the background 🙌

[@TonysTshirtsandKreativeKim]

Beautiful! Thanks for sharing this video.

[@evelyndavis9756]

Looks nice how much do you sell those for please tell me

[@simplelifeofsusan]

Gorgeous!

[@MinderellaCreations]

Thanks!

[@AmorevsTheWorld]

wow. i want to start this as a part time business

[@Tigeabee]

#TeamSilhouette !! Love love love this video and your glass!! Motivation for me. Thank you!

[@dianejohnson9981]

Dlonne To

[@sexyrawls2007]

Hey, thanks for the video! What is the reason for the acetone after removing the tape?

[@MinderellaCreations]

I use it to clean up the edges. Sometimes the epoxy is a little over the line. Helps clean it up and make sure there is a clean line.

[@noallineosbourne1852]

Thank you so much for this follow up

[@cindyvargas6995]

Great video - thank you. Do you wear a mask when applying the epoxy?

[@MinderellaCreations]

Yes, I do. It's good to use proper PPE when working with epoxy.

[@heidiewing6566]

I love these...can you wash them outside ...that decal on there?

[@MinderellaCreations]

You can hand wash them. 😊 If you’d like to hand wash them outside with a hose that’s probably fine too. 👍🏻

[@heidiewing6566]

@@MinderellaCreations hahaha

[@MinderellaCreations]

Heidi Ewing 🤣🤗😊

[@heidiewing6566]

@@MinderellaCreations I laughed so hard!! I reread what I wrote~Your comeback was spot on...answered my question & made me laugh! Love good humor!

[@MinderellaCreations]

Heidi Ewing 😂👍🏻 I love to make people laugh! ❤️

[@christinahawkins3356]

Love your videos!!!!

[@kimmizh6040]

This is beautiful, how do you avoid fish eyes?

[@MinderellaCreations]

Be sure your cup is cleaned off of all oils and debris, I wipe with acetone and let it dry before adding epoxy. I also wear gloves when handling the cup. If your room temp is too hot it will cause the epoxy to thin and separate causing fish eyes as well.

[@kimmizh6040]

@@MinderellaCreations Okay thank you. Will try that and let you know how it goes.

[@allergynurse1]

Very pretty- I so want to do an epoxy something!!!

[@robinhanff4248]

Beautiful!!

[@BabyLifestuff]

Lovely video! Question, is this epoxy material safe for dishwasher? And what tape are you using ? TIA

[@MinderellaCreations]

No dishwasher. It should be hand washed. I use electrical tape. 👍🏻😊

[@BabyLifestuff]

@@MinderellaCreations thank you for answer me 💞

[@allisonlamb3466]

Great video! Thinking about doing this as keepsakes for my sisters wedding. How many glasses do you usually get per container of glitter. You are so right that the polyester glitter looks best but with the price I want to make sure its worth it.

[@MinderellaCreations]

Allison Lamb It depends on the size. It doesn’t take a ton of glitter, even less of you base coat.

[@jessicajeffery3001]

Do you have any tips for using resin to seal the bottom side of a glass plate? Our kids are doing an art project where they are adding pastels and paper decoupage to the bottom of a glass plate. I wanted to add a layer of resin to make sure it is safe to hand wash.

[@MinderellaCreations]

You could use a quick setting one and use thin coats. I would probably leave a little space around the edges to make sure the epoxy can go around it to seal it. That sounds like fun! You would probably tape it off so when they’re decorating it there’s an edge.

[@Zennie371]

Thank you for your video. Can you use a hair dryer to get the bubbles out? Do you really need a cup Turner? Can you turn with hand as you paint and let it stand up and dry?

[@MinderellaCreations]

I do t recommend a hair dryer as it’s not enough direct heat and pushes debri around more. You can hand turn if you don’t have a rotisserie. It has to stay turning by hand until the epoxy stops moving or you’ll get bumps or drips. It’s about 2 hours hand turning.

[@Zennie371]

@@MinderellaCreations Thank you so much. That's a lot of turning.

[@dianejohnson9981]

Dlonne To

[@Cici_Janae1]

Beautiful!!! What do you use to clean the resin off of the spots you don't want it??

[@MinderellaCreations]

You have to clean it off while it’s still wet. A sponge and 100% acetone or 90% isopropyl alcohol is what I use. DIY: Prepping Glitter Tumbler and Removing Tape

[@ask4deville]

Great video! Could you do a video showing how you put the glitter on with the epoxy?

[@MinderellaCreations]

Deborah Dee I have done one. Check out my other videos. 👍🏻

[@ask4deville]

Minderella Creations yes, I saw it after I sent this message. Thanks! Another great video.

[@dianejohnson9981]

Dlonne To

[@GilTurman]

Beautiful :)

[@kylastynes9551]

Where do you buy all your glitter 😍

[@MinderellaCreations]

I have the places linked in my supplies videos. 😊 kzbin.info/www/bejne/aX_aaKltfKdgoJo

[@alanehall6967]

Good morning I have a question about you cup turner. How do you get it to stay secure mine does not hold my glasses level.

[@MinderellaCreations]

I use footballs on my Turner and they hold well. Be sure it’s tight.

[@UIV7096]

Nice color!! Where do I find a Wine Bottle Turner That will fit the openings of the wine bottle to epoxy as well? Ty

[@MinderellaCreations]

I haven’t turned one. I’d tape it to a turner.

[@ericakinerk6817]

What tape do you recommend for your wine glasses? THANK YOU!

[@MinderellaCreations]

Electrical tape from Amazon!

[@leighanncoleman7286]

Thank you for sharing your talent! Question How long after you remove the tape do you leave on the turner? I am doing stemless wine glasses and I did a practice one with epoxy and for some reason the epoxy setting in the middle of the glass suggestions? Thank you!

[@MinderellaCreations]

I leave mine on overnight usually. About 6-12 hours

[@douglasmckinney2829]

really nice.

[@mildredruiz1554]

That’s beautiful and how long does epoxy takes to dry because I really want to do this 😊😊😊

[@MinderellaCreations]

Depends on the epoxy but regular cure is 12 hours with a 3 day wait to ship or wrap. Faster curing epoxy (like counterculturediy.com fast set epoxy) is ready in two hours and 12.

[@mildredruiz1554]

Thank you

[@christinehood1329]

@@MinderellaCreations do you leave it on the turner the whole time?

[@MinderellaCreations]

@@christinehood1329 I typically do because I have space. If you don’t have space you can remove it once it’s stopped moving.

[@mrenton100]

Your videos are fab! Could I ask how do you decide how much to sell them for?

[@MinderellaCreations]

I factor in the supplies, my time, my expertise to get a price.

[@reebertJunkman]

Love what your doing, question how permanent, is this dishwasher safe? or at least very hot water, I want to use this idea but there will be very hot water around the surface, is that doable... it will not need to be food safe... its not being used as a drinking item.... just hot water...

[@MinderellaCreations]

Reebert McJunk replied to other comment. 😊

[@madeleinefloyd2956]

Great job! Did you put mod podge under the glitter? Or something ELSE? Thank you!

[@MinderellaCreations]

I applied the glitter with mod podge here.

[@arleyds]

is the heat gun neccesary? can you use a blow dryer instead?

[@MinderellaCreations]

I wouldn’t recommend a hair dryer. A heat gun, or torch are best. Hair dryer blows too much and isn’t direct heat.

[@GirlyBitsCosmetics]

I am completely mesmerized 😍 What kind of tape do you use? Painters tape, or electrical tape, or? How often do you open for orders? Last I looked you were not accepting orders, and I'm not sure how often to check back. Thanks

[@MinderellaCreations]

Pam Heil Electrical tape. I plan to open about once a month to 6 weeks. But the last time I opened I closed in less than 2 hours. I don’t take on many orders at a time as it’s a hobby for me.

[@denisetaylor8382]

@@MinderellaCreationswhat does this even mean. are you selling this tape every 6 weeks????

[@MinderellaCreations]

Denise Taylor I’m not sure what you mean?

[@StickerBoutiqueInc]

@@denisetaylor8382 Pam asked what kind of tape, then she also asked how often do you open for orders? so that's where her answer come frome.

[@fatimaarcaro8979]

Hi. Love your work it's my first time what is that machine called that has the foot ball on it and goes around Turner? Can I have a link please thanks.

[@MinderellaCreations]

It’s a cup turner, rotisserie, cuptisserie. I gave links in my supplies tutorial. kzbin.info/www/bejne/jZzWfWmoa7Rjb5o

[@fatimaarcaro8979]

@@MinderellaCreations thank you 😄🧡🧡🧡

[@jessicamuchler8066]

Amazing video & work 😊 what temperature do you set your heat gun at for this project?

[@MinderellaCreations]

My heat gun only had one temp. 😊

[@lamyen917]

Thanks for the instructions, it was very helpful. However when is the right time for us to remove the tape to have absolute straight line?

[@MinderellaCreations]

Lam Emily Too soon and your epoxy will run everywhere. Too late and it’ll be too tacky and could damage your seal and glitter. Timing depends on epoxy type and how much heat you’ve applied. It’s generally around 45 minutes to an hour

[@lamyen917]

Minderella Creations thank you so much 🍓 what about the glitter? I also use electrical tape, I remove the tape after 2nd or 3rd coat, however the modplogde is kinda sticky and it is harder to have perfect line like you have 😂

[@MinderellaCreations]

Lam Emily Remove Tape immediately after second mod podge/ glitter layer. If you use epoxy method to apply glitter pull tape immediately as well.

[@lamyen917]

Minderella Creations I see 😂 thank you for your fast reply ☺️ truly appreciated! 🌹🌹🌹

[@taylasoper5183]

how long do you wait for glitter and glue to dry between layers

[@MinderellaCreations]

I wait at least an hour. Or overnight.

[@PorscheAndAzalia]

Hi could you use a blowdryer if you dont own a heat gun?

[@MinderellaCreations]

A blowdryer is not ideal as it is not very hot and has a tendency to blow dust into your epoxy. You would be better off spritzing some 99% alcohol.

[@rosemarywilliams5136]

How long do you have too spin the gkas so it dries even

[@MinderellaCreations]

I usually spin 6-12 hours.

[@yonellowernet5984]

Dishwasher safe with the epoxy??what about handwashing with a sponge?? Just curious. Thank you and great video. Greetings from Aruba 😊

[@MinderellaCreations]

Hey! They are hand wash only. Dishwasher usage can break down the epoxy over time and so they should be washed by hand gently with a washcloth or non-abrasive sponge. 😊

[@yonellowernet5984]

I thought so...thank you very much !!😃

[@amyw7731]

Ok, so I finally got a turner and epoxy to make these turn out better. But, how long should I wait to take the tape off after I apply the epoxy?

[@MinderellaCreations]

It depends on your epoxy. Generally it should be removed after about 30-45 minutes. If you are using a fast set epoxy you can remove it after about 5 or 10. You want it to be tacky when you remove it so the epoxy doesn't shift much.

[@amyw7731]

@@MinderellaCreations Thank you for helping me with this! You saved me once again! I really appreciate the advise.

[@MinderellaCreations]

@@amyw7731 You bet!

[@rosiegarcia6554]

Hi, I’m knew to this but I’m confused what Apoxsee to use she said use mod podge and another one?

[@MinderellaCreations]

You can apply your glitter with epoxy or with mod podge. I also use epoxy to seal my glitter. Counterculturediy.Com I use the CCDIY Artist Resin.

[@cherylwillrich6324]

I just found your channel and love it! Quick question: why don’t you mix the epoxy in one cup? Since you measure 15mml, why not add the 2nd mixture to the first cup (to the 30mml line)? Just curious if there was some reason why that I missed in a video I haven’t watched yet. Thanks!!

[@MinderellaCreations]

I do it to make sure I get exact measurements. If I were to add the other on top of the other one there is a slight chance that the first amount wasn't exactly at the line or I overpoured and then it would be hard to match it exactly. So I do two separate cups so it is exact and if I overpour the first one I can add a little more to the second.

[@matthewjones1056]

Hey hope all is well, I just subscribed and I enjoy your videos. Quick question are you suppose to do Epoxy outside I saw a video and someone had on a gas mask and said make sure it's properly ventilated.

[@MinderellaCreations]

Hi! Proper PPE is recommended for sure. A well ventilated area and respirator are good to use. Definitely do your research. 👍🏻

[@carlacrump6999]

What tape do you use please I tried electrical tape and it ripped the resin off

[@MinderellaCreations]

I use electrical tape. You want to pull it off when the epoxy is still tacky before it cures. ❤️

[@GlitznDesignbyJohanna]

What do you mean with using epoxy glitter, then using mosh posh glitter?

[@MinderellaCreations]

I will either use epoxy to adhere my glitter or mod podge. Sometimes if the first layer isn’t good enough and it needs another coat of glitter I will add it with mod podge for that second coat. 😊

[@DownsizeDFW]

Great video. Thank you for sharing. Quick question.....did you remove the tape while the epoxy was still wet? Based on the cleaning up you show, that appears to be the case but wanted to be sure.

[@MinderellaCreations]

Yes, I do. It should be tacky but not too tacky to where you’ll pull it up. Then clean up anything that got under the tape.

[@lisayt4947]

I love your videos but I'm interested in making a spinner for myself or invest in one. How would i go about making one

[@MinderellaCreations]

I have a couple videos on here where I go over manual and rotisserie spinners. I have links in my supplies tutorial for ones you can purchase. kzbin.info/www/bejne/jZzWfWmoa7Rjb5o

[@nayanikasewwandi3718]

Can wash this after decoration. Thanks

[@MinderellaCreations]

Hand wash only. No dishwasher.

[@aliceperryman4032]

Is it possible to paint the glass with polyurethane instead of using apoxy?

[@MinderellaCreations]

You can try that. I like the look of epoxy best, so that's what I generally use, but there are alternatives for sure.

[@kristenleyba808]

Question.. Can you put epoxy or mod podge all the way up to the rim of a wine glass and then later drink out of it.. Question 2: do you recommend always hand washing your finished glasses even if you use the dishwasher safe mod podge ??

[@MinderellaCreations]

Kristen Avila Some do that. I don’t and I provide straws with my cups to be safe. It is an inert plastic once cured and it’s fda compliant for indirect/incidental contact so it’s said to be ok. Always handwash epoxy. Dishwasher safe is dishwasher safe after 30 days of curing.

[@jeanettehime]

thanks for the tutorial ! what is the tape brand? thanks

[@MinderellaCreations]

I have no idea lol...I bought it off Amazon...electrical tape.

[@NicoleOrem]

So do you recommend not using mod podge as your base for the glitter portion?

[@MinderellaCreations]

Nicole Orem when I used mod podge to apply my glitter it turned out just fine but now I have just over all been using epoxy to apply my glitter more and so going forward and especially with a wine glass it is not double walled I would recommend using the epoxy to apply my glitter rather than the mod podge and if you do use mod podge I would recommend using the dishwasher safe

[@lateannamurray5119]

Once the epoxy stops dripping and begins to harden do you have to keep letting it rotate or can u turn it upside down to finish drying?

[@MinderellaCreations]

Once it hasn’t moved in a half hour you are good to flip it once more and let it stay.

[@dianejohnson9981]

Dlonne To

[@dianejohnson9981]

@@MinderellaCreations Dlonne To

[@karsynsstemlove7583]

Where can I find the rotisserie turning machine? The person mentioned does not have them on her page any longer

[@MinderellaCreations]

Lots of people sell them on etsy if the Glamour Tribe Customs doesn't currently have them listed. She only lists them periodically.

[@karsynsstemlove7583]

Ok thanks. Love your work!!!!

[@Whichofthefavors]

If I spray paint a Mason Jar, can I use expoxy over it to seal it and give it that clear shiny finish?

[@MinderellaCreations]

There are several options if you’re painting. I use epoxy because it covers glitter better. You can use it on mason jars as well.

[@leighanncoleman7286]

How long did you wait until you removed the tape?

[@MinderellaCreations]

I wait between 30 minutes and 45 depending on epoxy. You want it to be done moving but not started curing quite yet. Tacky

[@leighanncoleman7286]

@@MinderellaCreations Thank you! I love your choice of music!

[@MinderellaCreations]

@@leighanncoleman7286 Thanks!!

[@patriciacorry3613]

How do you use appoty glitter

[@sirenanina88]

Do you leave the glass on the spinner to dry? As it rotating. Or can you apply epoxy to glass then set it somewhere to dry? Trying to figure out how to let them dry without it getting in even.

[@MinderellaCreations]

I spin them. Either by hand or on a spinner. If you set it down the epoxy will run off and harden and turn into a mess.

[@court3712]

As always, beautiful glass! How soon after applying the epoxy do you remove the tape? Also, you mentioned you didn't use mod podge to add the glitter but you used epoxy instead, do you just add the glitter to the epoxy after it's mixed or while mixing it?

[@MinderellaCreations]

I remove tape after about 30-45 minutes but it depends on your epoxy. I use a very thin layer of epoxy and apply like I would with mod podge. 😊

[@rociob90]

Just a quick question, does the glass need to be prepped? Like sanded?

[@MinderellaCreations]

I scuffed it up with sandpaper a little.

[@stuhlyhawk]

How long do you let the epoxy dry while on the turner?

[@MinderellaCreations]

6-8 hours. It’s usually hard to the touch by 10-12.

[@stuhlyhawk]

@@MinderellaCreations so you leave the turner on that whole time? Just making sure I understand❤

[@MinderellaCreations]

@@stuhlyhawk I usually do it at night and then turn it off first thing in the morning. I only leave the Turner on for 4-6 hours

[@coreycartwright4962]

Do you have to use a turner?

[@MinderellaCreations]

You have to turn it somehow. Either manually or on a rotisserie

[@dsnymickey3]

one other question...since I'm not crafty but going to give this a try....how is the Mod Podge dishwasher safe sealer? Does that work like the epoxy?

[@MinderellaCreations]

dsnymickey3 It is not equivalent to Epoxy. I would use it for mugs only. Not tumblers. I like Epoxy the best though.

[@Manders568]

How do you get it so smooth?! Mine was lumpy and bumpy! I did sand it, and I may try another coat of epoxy but dang…yours looks 50 times better than mine! Of course this is the second glass/tumbler I’ve done glitter and epoxy on 🤦🏻‍♀️.

[@MinderellaCreations]

Did you do two layers of glitter? If it’s lumpy and bumpy it’s because your mod podge/epoxy used to apply the glitter wasn’t smooth or you didn’t dry brush off the excess after the first coat was dry before adding the second coat.

[@coco9479]

@@MinderellaCreations how would you fix it if it’s not smooth ? Would you have to sand it or remove everything and start all over

[@MinderellaCreations]

@@coco9479 You can sand it and add another layer of epoxy.

[@monicascullion1030]

Do you put epoxy over the vinyl too?? Can they be washed??

[@MinderellaCreations]

Depends. I have on some and not on others.

[@Hismrs12272011]

Will any heat gun work?

[@MinderellaCreations]

I prefer a torch now, but I have used several different things and they did ok.

[@jessgervasi9263]

Can you show a video of you removing the tape after epoxy please? I am having a very hard time with this.

[@MinderellaCreations]

Not with a wine glass...it's a pain in the butt. I can try to record that with one of my next videos as it's not something I think about since it's a little bit after I'm done with all my other steps. :)

[@hearme19ify]

Do you hand wash the glass or use rubbing alcohol after you are completely done or do you tell the customer to wash before using?

[@MinderellaCreations]

hearme19ify I hand wash everyone once complete.

[@cherylg46]

@@MinderellaCreations Lol

[@tkj618]

Ok I new to doing this and I have question. If you put vinyl on the cup why wouldn’t you pull the epoxy over it so it doesn’t peel off? Or can you do it at all? Thanks in advance!

[@MinderellaCreations]

Most cups I do put epoxy over. This design I do not.

[@thanaildeeva1]

If I don’t have a heat gun can I use a hair dryer? Or would it be best that I buy a heat gun?

[@MinderellaCreations]

I would suggest a heat gun ($14 at Harbor Freight) or a butane torch are best.

[@thanaildeeva1]

Minderella Creations Okay thank you

[@latisheahorton1212]

how long did it take the epoxy to dry?

[@MinderellaCreations]

Epoxy cures. It doesn’t actually dry. It takes about 8-12 hours to become hard to the touch. 72 hours to be cured enough to ship. It takes 30 days to fully cure.

[@latisheahorton1212]

@@MinderellaCreations okay thank you

[@crystalmj1982]

When you epoxy a glass or tumbler, is it useable? Like dishwasher safe or handwash safe?

[@MinderellaCreations]

matttabi matttabi handwash only

[@mykhaltait6562]

as far as the heat gun, i’ve already epoxied my cups, about an hour ago, i didn’t know about the heat gun part, is it too late to heat gun the cup now?

[@MinderellaCreations]

You don't have to use a heat gun or heat source...you only need to if you have an issue with bubbles. I use mine to make sure there are no bubbles.

[@emilywilliamson7676]

Beautiful creations! Are they hand wash only at this point? Fearful of the glitter scratching off and I have some experience with epoxy :/ Thx

[@MinderellaCreations]

Mine are hand wash only. The glitter is completely sealed but I don’t want to compromise the epoxy by putting in dishwasher

[@dianaferner310]

Did you have the wine glass with initial and infinity symbol under it?

[@genevievestevens5488]

So, how long do I let the first coat of glitter sit before apply the 2nd coat, then the 3rd? How long should we use the heat gun for as well? Can we use the same things : mod podge- hard coat and epoxy to do a mug as well?

[@MinderellaCreations]

If you use epoxy you’ll need to let it cure for 3-4 hours at least. I usually wait overnight. Mod podge I usually wait about an hour or 2. Heat gun use sparingly. Just pop bubbles. I prefer the epoxy as adhesive now after I’ve become more familiar with it.

[@NiquesCreativeStudio]

I almost always have to use 2 coats of epoxy to get a smooth finish did u only do one coat

[@MinderellaCreations]

quanisha cobb I did two as well. I only showed the first to keep the video short.

[@j-leespence7140]

@@MinderellaCreations do you sand in between coats?

[@MinderellaCreations]

@@j-leespence7140 If needed, yes.

[@MinderellaCreations]

@Raquel M If you have any uneven areas or parts of epoxy that are sticking up you would want to sand.

[@christinamiller5783]

How do you clean the glass once resin has set. I made myself a wine glass and the resin went cloudy xx

[@MinderellaCreations]

It needs to cure about 72 hours. Humidity or moisture can impact cure time. If it goes cloudy that usually means moisture has affected it. If it’s mixed with the proper measurements, for the right amount of time and cured long enough it shouldn’t go cloudy.

[@christinamiller5783]

@@MinderellaCreations ok thank you I’ll try curing longer. Xx

[@karethatinsley926]

Hi, I would to know the name of the turner.I'm sorry couldn't catch the name.

[@MinderellaCreations]

It’s a turner by glamour tribe customs. She’s not currently making turners though. The Boan, facebook.com/profile.php?id=100057286546246&mibextid=LQQJ4d facebook.com/groups/503816286862945/?ref=share&mibextid=S66gvF

[@bevdowdy9483]

hi i didn't quite hear how much epoxy you used im trying to take notes so i don't mess up. do you use the same amount of part a and part b? sorry for all the questions i just want to not make a mistake. thank you

[@MinderellaCreations]

The resin you use should have instructions telling you how to mix it and the ratio. Most are 1:1 by volume, but some vary and use 2:1 or by weight.

[@bevdowdy9483]

@@MinderellaCreations ok thank you. I thought you gave a specific amount that you were using to coat the glitter.

[@MinderellaCreations]

bev dowdy It actually depends on my cup, but I usually mix 10-15ml each part or more.

[@bevdowdy9483]

@@MinderellaCreations ok thank you. I appreciate your help

[@grahamteja]

Where do you get the motor for the turner?She says it does not come with the purchase on Etsy.

[@MinderellaCreations]

grahamteja Amazon is where I got mine.

[@adriannedriidennis7390]

What kind of tape do u use? Painters tape isn’t working for me

[@MinderellaCreations]

I use electrical tape.

[@adriannedriidennis7390]

Minderella Creations I’m sorry I went through every comment lol i figures it out lol but I can only find black where I am is there a difference just because color?

[@MinderellaCreations]

Drii Drii I buy mine from Amazon. Comes in all different colors.

[@adriannedriidennis7390]

Minderella Creations my glass was a complete disaster :( wah!

[@MinderellaCreations]

Drii Drii Awww! I’m sorry!!

[@sherryoneal5299]

How long do you let the glass turn ?!

[@MinderellaCreations]

Depends on the epoxy but usually about 4-6 hours or overnight.