EPOXY: Mixing, Application and Issues

[@mede5858]

No one. I been know one ever tells WHY to use the heat gun briefly!!!! Thank you I just learned why my cups are wonky.

[@lynnsjourney497]

I'm new to this... and so glad I've found your channel. I appreciate how you take your time, and teach the in's and out's to master this craft. Thank you so much.

[@ask4deville]

I can and do watch your videos over and over again. They are so informative and easy to follow. Great tips and tricks! Thank you!

[@MsPrototype7]

You have such a kind spirit to share your gift with us. Thank you

[@cdmanor777]

Thank you, Miss Lady. This video was perfect for what I needed to learn.

[@lisaj4364]

Hey Minderella, I’m a new subscriber, I love your beautiful work, the music is awesome. I have been glued to your channel since I found you, I am loving learning new things. I live on an island, let’s call it humidity island 😲. After having a life altering experience I had to come out of a stressful job. I was looking at something that speaks to my creative spirit and there you were..thanks sooo much my angel 🙏🏻

[@MinderellaCreations]

I'm so glad you found something pretty to do! I hope you enjoy it as much as I do!

[@janicebrigance1813]

Every time I watch you I learn something new! Love your teaching!

[@angiegray6507]

Oh miss Mindy... you always make everything seem so clear. I find myself rewatching many of your videos since they are so helpful! Thanks for all you do to help us all out.

[@MinderellaCreations]

Angie Gray You’re so welcome!

[@nancycraig4672]

I love all your tutorials. I am seriously a super fan of you. You have made and saved me so much money also, and i'm still super new to this! Completely off topic, but I have very bad anxiety/depression and i'm currently on medication. Tumblers are supposed to be therapeutic for me and it's so much less stressful when I watch ( You have the sweetest, most calming voice ever, super precise and just really down to earth). Not to be a weirdo but I watch your tutorials and I get this super calm feeling over me. Thank you for the tips, saving my sanity lol, and over all just being you. You're such a beautiful person!

[@MinderellaCreations]

Glad to hear that! 😊❤️

[@anafluri6230]

I love the effect of the glitter on the cup is beautiful

[@hmak2580]

I'm so glad I found your channel! You are so helpful and informative! Thank you for sharing all your amazing knowledge and experience! ❤

[@juliehassen5099]

New to this channel, I too love the background music. And your tips are great since I am still contemplating this project. Thanks

[@sjabean]

This video is so SO helpful! These are all questions I have had as a new DIYer. Thank you so much for your input and help!

[@Avotts]

hey i just realuzed you have this entire thing on epoxy...tumblers.....i have seen other peoples, i dont even watch theirs because i think the projects look trashy.......yours look beautiful. i would be so proud to have one. i am trying to kearn tons about resins,etc.... i am not artistic....but i want to redo my kitchen. wanna come to mississippi and help me? we could really have some fun....you teaching this old gal new things. i am glad i found this channel.

[@josieblackhawk6437]

Hello, love this video, was curious, how do you apply the the decals unto the cups? They look marvellous. Is there a video for this?

[@MinderellaCreations]

I have a couple that I go over the decals, creating and applying them. kzbin.info/www/bejne/i3bVeXmVYrFnY8k kzbin.info/www/bejne/rXaWqXRsjL6WhcU

[@ramonasmith257]

Good music! I have a hard time concentrating on you cause I’m singing along!! 😂 thanks for your helpful advice. 🙏🏻♥️

[@MinderellaCreations]

Lol! Glad you enjoyed it!

[@sherriejohnson9250]

Oh...my...goodness. I thank you so, so much for making this video. I am just now in the process of making my very first epoxy glitter tumbler. This has helped me so much! I plan to subscribe here and watch as many of your videos as I can. So much information here. Thank you...thank you!!! And I, too, love your music. I have seen all of these singers at Lifest in Oshkosh, WI over the past 19 years. Actually, Britt Nicole came to our church 10 years ago when we had just finished our new addition (sanctuary) along with Hawk Nelson and Anthem Lights. Again...thanks for all of the info here.

[@MinderellaCreations]

I went to Oshkosh for an air show many years ago for work when I worked on software for airplane multi-function displays! Glad you are enjoying the vids!

[@sherriejohnson9250]

​@@MinderellaCreations Oh...I'm getting ready to hop on the treadmill and listen to another one of your videos. I just put the glitter on my tumbler and will let it set for awhile and spray with sealer. Then the scary part...the epoxy! Oh..first a bit of sanding, I think! I live way up here in the UP of Michigan so I can't walk outside yet...still lots of snow...had an ice storm yesterday. I'm so excited to learn from you. I've watched tons of videos on this but this very ONE from you is just soooo good. I have had my spinner for 3 months now!! Just been scared to attempt this. I have lots and lots I plan to make. I have 4 kids...all married. 11 grandkids...5 of whom are married...and 6 great grandkids! This will be my tumbler, being the first one. But I have to make one this week for my 15 year old granddaughter. Then there are 3 others who will be 10, 12 and 14 in the next 3 weeks!!!! These will make such lovely and meaningful Christmas and birthday gifts. Thanks again...You are my hero! :-)

[@amandaolson4232]

I LOVE the music you play! This video is also great! Liked and subscribed

[@snapsbymeli]

I am glad I an across this, my resin keeps staying a little sticky just a bit, but i am noticing so long it is warm in the garage it drys, as the weather cools it is harder to dry. I am also using the silicon measure cup, I like you 2 cup trick

[@MinderellaCreations]

Awesome! Good luck!

[@angiee3465]

Thank you so much for this video. You explained in a great way! God bless.

[@MinderellaCreations]

I'm glad you found it helpful!!

[@chimaobianyaegbunam9333]

yea!!!!! I found it!! I had to use an app to search for that song playing in the background, ''what faith can do'' was my favorite song 2014. nice coloring stuff there :-)

[@lynnlio]

Oh my, this video is everything!!! You explain every part of this excellent. Thank you so much!!! Just subscribed to your channel. Your work is absolutely stunning.

[@MinderellaCreations]

Thank you!

[@tc247]

I wish I would have found you BEFORE I got to excited after watching a few video's and wanting to make things. WHAT A MESS I HAVE on my hands, table, new resin pouring cups, etc., etc., etc... I wasted a lot and I'm not so worry about that as I am about trying to figure out how to clean my resin cups, stick covers, etc. Oh and my hands, after I took my gloves off are still a little sticky after washing and washing with alcohol, alcohol sanitizer, Dawn, you name it I've done it at least just on my hands. I just left the rest of the mess on the table. YEAH call me whatever you want, I already have...DUMB is the first one. Ladies, learn from me and watch more video's first. I just wasted a lot of money. UGHhhhhhhhh. Anyway, so glad I found your channel and watching some of your video's are calming me down. Oh my, what BEAUTIFUL Tumblers. Love this video, and watching you mix this made so much sense. And my hands are OK after all the treatments, lol...The lotion worked. Thank you. Thumbs UP! PS. These cups are GORGEOUS. DO you sell these and if you do where can I order some? Thank you. IT will be the next century before I learn to make these. lol but true :) PS. YEAH, these are gorgeous and I would like to buy 1 for me and then some for relatives. BTW, in going through your video's looking for something EASY a old lady could do, I saw your beautiful babies. We've been blessed with 2 step grandsons, that we never consider step. They came to us at ages 6 and 8 and now are 25 and 23. My daughter is went through infertility but quit. Your babies are beautiful! Just had to tell you that. I would to have loved to have a house full of grandkids. We now just fill it up with our great neices and nephews, but some live to far away and we're moving after this horrible virus goes away. We got quarintined sp? as we almost sold our home here to move to the state my husband has his job in. I'm disabled. Now we don't know what is going to happen but we're Christians and I know there is a reason for everything even if we don't understand it. Wisdom does come with age. At least some of it. With me and Resin, NOT SO MUCH! Anyway, Awesome work! blessings~

[@MinderellaCreations]

Victoria Ciolek Glad you got everything clean. I use baby wipes to clean my hands should I get anything on me. It seemed to work the best. Acetone or alcohol you want to stay clear of because it’ll break it down and get into your skin. Glad you enjoyed! I sell from my Facebook page, but I do work off a waitlist that’s currently closed and I stopped invoicing until this craziness is calmed down. facebook.com/MinderellaCreations. Blessings!

[@tc247]

@@MinderellaCreations Thank you for all the info. I had ONLY gotten my hands clean and just let everything set where it was because I was SO DISGUSTED with myself. Well I woke up this am and the coasters didn't come out as bad as I thought. I just have a little I have to sand off the sides. They aren't as pretty as I wanted but for just using them for now will be fine and it was a GREAT LEARNING EXPERIENCE, as was watching your tutorial and some others I ended up watching, and should have watched FIRST before I did what I did. The resin left in my new expensive Resin cups just pulled out like butter almost and everything is clean. I did wipe them out with a baby wipe. Honey, I don't mind waiting for one of your tumblers. I would wait to with everything going on. I'm disabled and have lung and heart issues, my lungs are in horrible shape. IN fact my Dr. wanted me to be tested about 3 wks ago but we didn't have any tests then and don't now except if you go into the ER and you have a temp. and then they keep you. SO, we have very few. I got better after 2 rounds of antibiotics and steroids for my lungs, which usually do the trick, so I got lucky or I like to say both BLESSED and lucky! I don't go out, except if it is in the yard. My hubby does everything. IT hurts me not to be able to see my family but if it keeps them safe, then so be it. I'm praying for everyone in the world and especially in our Country for our leaders, etc...They say the Pandemic is going to hit my state really hard in 3 wks and we don't have enough supplies. I don't think anyone does really, except that NYC and CA, WA and now LA are getting them. Our Realtor said last night we may not be able to sell our house for another yr and then he doesn't know if we will get out of it what we need to get a house in the state we're moving to. SO everything is up in the air. All my other crafts are packed and in the POD, which may get unpacked, because I will go nuts if I can't be doing something. Thank you. Stay safe and healthy~Blessings to you and yours! sorry for the novel!

[@HouseScraper]

Hello I am very. Excited because today I just got my manual cup turner cannot wait to get home and play thank you so much for all of your videos I cannot wait to get the rotisserie turner

[@immanuelsmommy22]

You’re the best💞 I’m new to this I haven’t even started, waiting on fiancé to make my cuptisserie so I’m learning a lot which most is from you😊

[@MinderellaCreations]

PZwithTara Glad to hear it!

[@HouseScraper]

Thank you so much for your videos I mean all of your videos are good full of informations I really appreciate you

[@MinderellaCreations]

House scrapper You’re welcome!

[@craigjen05]

I just love your videos. Thank you so much for sharing with us.

[@brittanymeadows5733]

LOVE THIS VIDEO! THIS HELPED SO MUCH FOR ME BEING A BEGINNER

[@suebeefly08]

Loved this video and the music too.🙏🏾🙏🏾🙏🏾🌹🌹🌹

[@nicolejackson4753]

Ty soo much for explaining this. Was really curious on how to use epoxy 💜💜💜

[@sheriasselin983]

love the turner your using do you have a video showing it and how you made it thanks as id love to make another one similiar

[@MinderellaCreations]

Sheri Asselin I do have a turner tutorial showing the basics of what I did to build it. I also have additional notes at the end of my supplies video.

[@edwinmidsummer7457]

Very very useful video.

[@lisaallen2413]

Thank you so much for sharing your knowledge- you are so helpful!

[@MinderellaCreations]

Lisa Allen you’re so welcome!

[@joycecote6315]

I just love your videos. I'm new & have learned so much from u! Tx so much!!

[@milagrosarango5614]

Thank you this is what I am most intimidated by

[@robinsnestplans]

Thank you so much for your excellent tutorials! I took the plunge and tried to do a cup myself, waiting on to cure , still tacky but before 24 hours lol...this is a hobby of patience LOL...

[@quietrain7]

Thank you so much for making this video. I learned a lot. From the errors I’ve made. How to correct them.

[@librajay6244]

You are so amazing .wow I'm glad I came across your chanel.oh my goodness I do glitter but it never come out the way I want it . thank you so much

[@MinderellaCreations]

Thank you!!

[@21cstinch]

I don't use epoxy for cups but I can use your mixing tips. Thank you for the great informative video.

[@JustBeingJonerica]

Do you seal your glitter after you apply it before you add the epoxy?

[@trucker845]

Thank you so much ,I was literally pulling my hair trying to figure out what I was doing wrong ❤️

[@latishashaw3973]

Me too I’m going crazy I can’t get it right

[@sherryebersole1349]

This is the best most informative video ever, I needed a refresher apparently because my cups where getting wavy and bumpy, I think I was applying too much heat gun, What is the best temperature to keep the room, I was keeping mine too hot I think , the epoxy I been using is already very thin, so I think that's why I have been having issues too....epoxy I use is called clear cast 7000 I wanted it because less bubbles since its thin, but I only like it now for final coat because its so thin, I have culture counter now but haven't used it much any suggestions with the new epoxy.....soon I will have 2 gallons of fx premium, so I was glad to see your video you were using it . Thank you so much for your awesome videos , you rock

[@MinderellaCreations]

Counter Culture is my favorite! It’s thick and smooth as butter. Stirring slowly is important and don’t whip it. Room temp is fine. Some make sure the individual parts are warm prior to mixing.

[@Teapotbeets]

Minderella I love you!! Swear you read my mind I'm going to start making cups and this was my main concern was how much epoxy for a cup!

[@MinderellaCreations]

Lanell garfias Glad I could help!!

[@tyiwongaiter842]

Good afternoon. My daughter and I are working on cups and we have a turner but it seems as if some of the cups have this thick epoxy coating but only on the bottom. How can we fix it? Everything else comes out pretty smooth. Thanks in advance for your assistance

[@MinderellaCreations]

Tyiwon Gaiter That generally means your turner isn’t level causing it to pool at the bottom. Fix your turner and your cups should come out smooth. For cups already like that, use a dremel sander and sand those thick spots out and add another coat of epoxy.

[@tyiwongaiter842]

Thank you for your help

[@GlitterinaCup]

Thanks so much for sharing your knowledge!

[@MissRaeRae085]

I’m in the process of watching all of your videos. Just found you and I want to try this. Can you skip the heat gun step? I’m trying to save cost and I seen a couple other videos they did not do this step.

[@MinderellaCreations]

The heat gun is to pop the bubbles. You don't HAVE to do it, but you'll get a smoother finish and no bubbles if you do.

[@samanthahannon8894]

Can i use play-dou as a mould for resin thank love your video

[@MinderellaCreations]

Samantha Hannon I have no clue about that. I would recommend doing research on what can be used. I always use silicone molds. That’s pretty much it.

[@ashleynajera927]

Hi Mindy! New Subbie :) Thanks so much for uploading your knowledge! You've inspired me to start my own business :D I love your work and your techniques, all your tips and tricks will help so so much!!

[@MinderellaCreations]

Thanks so much! Good luck!!

[@kristinsingleton3143]

The unicorn cup is so cute

[@tiffanymccollum9670]

This was awesome! Can you tell me what color(s) glitter you used in the unicorn cup?

[@MinderellaCreations]

tiffany mccollum It’s Pandora from Featherbeardesigns.com

[@juliehassen5099]

I don't know if this is the place for questions but here it goes. Can a craft heat gun be used and what about epoxy yellowing?

[@MinderellaCreations]

An embossing gun is what I started with...a heat gun or torch is better though with more direct heat. What about the epoxy yellowing? All epoxy will yellow over time. Some have better UV protection and will not yellow as quickly or as much.

[@juliehassen5099]

@@MinderellaCreations Thank you Mindy for taking the time to educate a newbie

[@moviemode3781]

So is it the spinning that evens the epoxy? I find applying it hand held it leaves streak lines.

[@MinderellaCreations]

Yes, spinning it will keep it even after being applied until it cures.

[@robertosoler1727]

I really like your videos and the dedication with which you explain step by step. But I have a question, at what point and how do you remove the tape in the epoxy process? Thk

[@MinderellaCreations]

I go over tape removal in this video. Thanks! kzbin.info/www/bejne/naavgIOwrbiGfKM

[@mellyspearls6260]

I found your channel last night, I have watched several of your videos, awesome work. I am a so new to all this cup thing and so I am a little lost on a few things. What do you use for the decals? What types of glitter and paint is recommended and so on. Do you have a start up list of supplies needed to get going? I have seen your links so I am slowly putting things in order. I can't do much as of now as we have a military pcs move coming so once I get settled in the new place I would love to work on getting cups going. Is there a way we can private message?

[@MinderellaCreations]

Melly’s Pearls My Supplies video and links is something good to check out for what supplies to use. I cut vinyl using my silhouette and go over that process in a couple of my videos. I answer questions here and you can also join tumbler groups for asking questions. Our group is m.facebook.com/groups/123795608260487 Supplies tutorial kzbin.info/www/bejne/jZzWfWmoa7Rjb5o

[@metals2546]

Lovely video and very helpful. Occasionally when I am pouring my mixed epoxy I get what appears to be waves towards the end of the pour, and it is noticeable when it dries. Not sure why this is, any ideas? Thank you.

[@MinderellaCreations]

It's setting up faster than you're working or you're applying too much heat to it (if you're using heat) and it's curing too fast and hardening. You want to apply it while it's still runny so you can smooth it and then turn it as it is curing. Turn it more often if it's getting waves. to keep it from settling.

[@metals2546]

Thank you very much for the helpful response. It is odd that for most of the pouring out of the cup the epoxy is fine, it seems that once I get to the last part that is pouring out, it starts to get wavy. I will give your suggestions a try.

[@MinderellaCreations]

Yeah, I'm guessing that it's because it's already starting to cure. It cures rather quickly in the cup. :)

[@fatimahuerta1102]

Hi Minderella. I just found your awesome videos and music today. Thank you for them. I tried a wood grain tumbler today and unfortunately my first application of epoxy left bubbles. I did seal tumbler with Rust-Oleum Matte Clear Enamel after alcohol ink application, let it dry, then I stirred (Art Resin) epoxy slowly, applied epoxy, got bubbles, used a butane torch, but it didn’t take out bubbles. PLEASE, any suggestions/advice from you would be greatly appreciated? Thank you.

[@MinderellaCreations]

It takes practice to learn what causes bubbles for you. Sometimes it's stirring too fast. Sometimes it is the room temp when you mix. It is hard to say without knowing. Some cups are just difficult. Sometimes it can even be the sealer causing issues.

[@fatimahuerta7525]

Thank you for your response. Soooo many people who make You Tube videos say If You Have a Question, Just Ask Me. When I do ask a question, they never respond. So, thank you for responding.

[@muddyducksatv1501]

I'm using the same epoxy you are. I'm having problems with bubbles no matter how slow I stir it. If I'm doing a tumbler with bubbly resin can I get the bubbles out with the heat gun? Help please im going to try it like you did. I do change cups too.

[@MinderellaCreations]

Every time I had bubble issues I was able to pop them with a torch/mini torch as long as I didn't put too many into it when stirring it. :)

[@espereezy]

Great tutorial! I have a couple of fingerprints on my final coat. Can I add a thin coat of epoxy over just those spots, or would you recommend coating the entire cup?

[@MinderellaCreations]

Esperanza Lopez With epoxy I’ve not seen anyone be able to spot correct. I’d sand it down and add another full coat.

[@espereezy]

@@MinderellaCreations ok, *sad face* I'll do that. I was super excited about my mug until I noticed the prints...time to lock the kids out of the craft room :-) Thank you for your reply!!

[@MinderellaCreations]

Esperanza Lopez Yep! Be sure to give it 24 hours until you touch it. Don’t use for 48-72 hours. 👍🏻

[@biznichi]

How do you make sure the top is sealed good? Have you ever had a problem with the top cracking at the seal?

[@MinderellaCreations]

I haven't had that issue thus far. I make sure I press down around the top and remove any excess prior to it curing, while it's still wet, so there is nothing going over the rim.

[@tayagibson6616]

I absolutely love your work and your videos ! They are extremely helpful and informational! Thank you so much for sharing ! How long do you leave the cups to rotate for?

[@MinderellaCreations]

4-6 hours and then take them off when cured completely. At least 12 hours.

[@cooks3008]

Your videos are awesome! Thank you! Also, could the epoxy be applied with a pair brush? And could I apply it to my glass & then allow it to cure sitting in one spot?

[@MinderellaCreations]

Epoxy is self leveling, so it needs to keep spinning if you do thicker coats. You can do thin coats and not spin it, but it will take 4-5 to build up a good coverage.

[@denisekersey8120]

Love your tutorial you are very clear,precise. I have had my mixtures for a time scared to try. You have motivated me to go for it thanks

[@nadinetula9003]

Hi I was wondering what I can do if I need to put more glitter in some spots and I already put my first coat of epoxy? Thank you

[@MinderellaCreations]

You can add glitter on top of a thin layer of epoxy but it will most likely be noticeable if you do spots. Do the whole thing again for an even layer.

[@nadinetula9003]

@@MinderellaCreations thank you so much I wanted to do that but wasn't sure if I could do i have to sand it before I add more epoxy and glitter?

[@MinderellaCreations]

nadine tula You shouldn’t ever sand glitter directly as many colors it’ll take off the color, especially metallic glitters or craft glitters since the color is on the film not the actual film. You only sand once you have epoxied over the glitter and then want to be careful as not to hit the glitter under the epoxy. 👍🏻❤️

[@milagrosarango5614]

I love this video always come back to it to make sure I am doing things right! How long do you wait in between coats to apply second coat of epoxy?

[@MinderellaCreations]

Milagros Arango I included those details in this video description. 👍🏻

[@milagrosarango5614]

Minderella Creations yup your right I even wrote down the answer lol

[@MinderellaCreations]

Milagros Arango Lol!

[@BABYGIRL4U1]

Have you ever mixed more epoxy amounts? as I have a dinning room table I have painted with Glitter and glossed but still abit rough. I really want to cover it but I would rather do it in smaller batches as I have 2litre epoxy and have to do it my living room. your the first video I have watched that actually says the things that can go wrong. I have worked to hard to ruin it. hope you can help xx love your channel

[@MinderellaCreations]

I would look up tutorials on counter top epoxying...that is similar to what you're trying to accomplish. I haven't done anything large scale like that...but I'm sure looking up those types of tutorials would be a huge help. :) Good luck!

[@vwill4993]

Do you have any recommendations for epoxy clean up like let's see if you have some of that falls on the floor or the countertop

[@MinderellaCreations]

The best way to clean it up is if it's wet. Clean it off with a wet wipe or 91% alcohol. I have some that will eternally be in my carpet. It's hard because I didn't notice it and it dried. Sigh.

[@vwill4993]

Thank u

[@joycecote6315]

If u don't have a heat gun, any other suggestion of what do do for bubbles?

[@MinderellaCreations]

Joyce Cote you can blow through a straw, use an embossing gun or hair dryer, but be careful with the hair dryer blowing.

[@brittanyhoover4284]

Hi there! What glitter did you use for the off-white, creamy color?? I'm having one heck of a time finding a color close to that! Also, what gloves do you recommend??

[@MinderellaCreations]

Brittany Hoover It’s called Pandora from Featherbear Bling.

[@naziakhan5238]

Both A and B should be in equal proportion?

[@MinderellaCreations]

Yes

[@JulioLopez-yd6ke]

Thanks for the heat gun tips. I'm a beginner and couldn't understand why i was getting waves on my tumblrs.

[@Laguaridadelpistolero]

The gliter is extra fine, and for the first layer of epoxy I used 15ML. The piece that is sticking out is not so big but its visible. What would you sudjest me to do to fix it? Or to avoid that from happening. Thank you in advance.

[@MinderellaCreations]

If it’s one piece only you can use a hobby knife and cut it off even. Extra fine glitter I don’t usually see that issue unless you didn’t use enough epoxy. I usually use 30ml for first coat. I want a good thick layer.

[@Laguaridadelpistolero]

@@MinderellaCreations thanks so much

[@tonylavergne2001]

I have been watching all your videos since I found you. Love your videos by the way. My question is I saw you sing a different epoxy in another video and I believe it was alluminite but I see that you are now using the FX premium. My question is, was there a reason for the change, like smell or curing time? I bought promarine and have only done two makeup brush holders and my hubby says that it smells so awful. I now wanna try one of these other two.

[@MinderellaCreations]

Ammomomma Creates I’ve used 7 or 8 different epoxied. They all have different qualities, curing time, viscosity, color, heat tolerance, work time etc. I’d recommend finding what works for you. I’m currently using Counter Culture DIY’s Acrylic Pouring Resin.

[@tonylavergne2001]

Minderella Creations ok thanks so much for your response. Love your videos, keep up the beautiful work

[@MinderellaCreations]

@@tonylavergne2001 No problem! Thank you!

[@abdulmatinabdulkhalique985]

There are many epoxy like A and B and ratio of 3:1 will it be good?

[@MinderellaCreations]

I use 1:1 ratio epoxies. I haven’t seen a 3:1.

[@erickreyes1725]

Hello 🙂🙂 what kind of epoxy do u use . Thank you godbless

[@MinderellaCreations]

Erick Reyes I’m using Counter Culture DIY Artist Resin. Counterculturediy.Com

[@erickreyes1725]

@@MinderellaCreations thank you so much . godbless

[@susanczajka6327]

You are sooooooo good!!

[@Laguaridadelpistolero]

Hi Minderella, I am trying to make a wine glass and I already did my first layer of epoxy. The only problem I have is that there are some parts of the glitter that stick out. Does the part that stick out disapear when I add the second layer of epoxy? Or is there a way I can fix that before hand? Thank you in advance.

[@MinderellaCreations]

Depends on how far they’re sticking out and what type of glitter. Some will change color if you sand it so you wouldn’t want to do that. Needs to be as smooth as possible prior to final coat of epoxy.

[@carmenheredia5479]

Thank You!

[@krysa5604]

Thank you so much for your videos! I'm a newbie and trying to learn as much as I can. Question, can I use my blow dryer to heat the epoxy bc I dont have a heat gun?? Thank you! 🤗🤗

[@MinderellaCreations]

I do not recommend a blow dryer. You need more direct and concentrated heat and the blow dryer also blows particles around the air.

[@krysa5604]

@@MinderellaCreations haha. Thank you for responding. It was worth asking. I'm gonna take your advice, I have a harbor frieght near me, the heat gun I looked up o their website is only $14.99. Thanks for all your awesome videos! I've learned a lot. I appreciate the time you put into making them for all of us newbies 🤗🤗

[@syedsadiqrazahashmati7180]

Wow nice I like epoxy items

[@nessasmiles]

I tried epoxying my first tumbler today after watching pretty much every video you have lol. The only question I have is when i used the heat gun to pop the bubbles it caused my resin to drip faster. Is that normal? Its currently curing the 2nd coat. I'm crossing my fingers that it all works out lol

[@MinderellaCreations]

Yes, that is normal. You're heating up the resin, which will thin it. Use it sparingly to pop bubbles in a swooping motion and don't hover very long on any one spot.

[@Daughter_of_the_King_USA]

Good video... Except how do I fix a fisheye that has started to develope after the epoxy has started to harden?🤔

[@MinderellaCreations]

It’s best to keep an eye on it early. They usually will show up, if they’re going to, within the first 10-20 minutes of applying the epoxy. You still have time during that timeframe to spread the epoxy out a bit. Can hit it with a heat gun lightly to smooth it out. If it’s already too hard to move around you’ll need to either flood coat it now (mix up another batch and apply all over) or wait for it to cure and add another coat.

[@ruggedrickrude1946]

@27:27 you poured left over expoxy on cup and just let it rotate,no spreading it on at all,is that correct? and it will not clump up persay

[@MinderellaCreations]

Rugged Rick Rude I was adding more onto the Epoxy that was already there. As it turns it smooth out.

[@mychellederosin]

should a heat lamp be used in the curing process?

[@MinderellaCreations]

Mychelle Derosin It’s not necessary. Some use them to keep the room a certain temp or to speed the process up since it will cure faster the warmer it is.

[@mychellederosin]

I'm going to try your method. I'm really having problems with fish eyes and dimples. I hate having to keep going over my tumblers 3 and 4 times to be super smooth. Someone also told me to try the low odor by Krylon that it should reduce the oils in the paint. Have you tried this?

[@MinderellaCreations]

Mychelle Derosin I haven’t tried that.

[@michaelgrimes7796]

Thanks for the info, but which epoxy do you recommend?

[@MinderellaCreations]

Michael Grimes The ones I’ve used are in the linked supplies. I’m currently using FX but looking into others.

[@muddylife411]

Hi how are you I’m trying to find your video on how to remove fish eyes i have been getting a lot of them lately when applying the epoxy I were gloves the cup is wiped down with alcohol and stii getting fish eyes any info would help thank you

[@MinderellaCreations]

Fish eyes are usually one of several things. Too hot in the room and it’s separating, too thin of a coat, contaminants on the surface (seal with quick coat from CCDIY OR A CLEAR SEALER), acetone and a lint free cloth are good to clean. Alcohol can sometimes cause the fisheyes.

[@larondajohnson3422]

Hello I did some wine glasses and they are sticky how do I fix this

[@deedeeharper4088]

Probably a silly question but I am working on my first cup and I struggled with keeping the work area clean. I spread the epoxy and poured the glitter over it but ended up with epoxy on the glitter bottles. Any tips? Thanks

[@MinderellaCreations]

Man...if you figure anything out let me know. 😂😂 I’m constantly touching my hands in the epoxy and getting it everywhere. I keep baby wipes close by and wipe up my hands and anything I touch immediately. I have a silicone mat under my work area that helps too. 😊

[@CherylMooreGlittersAndMoore]

Great video! Thank you so much for doing this!

[@ronavaldon2194]

Hi Minderella Im ur new subscriber.just to ask, what kind of resin is the best to used.

[@MinderellaCreations]

I have the ones I use in my supplies tutorial. kzbin.info/www/bejne/jZzWfWmoa7Rjb5o

[@robincook7209]

When applying your first coat of epoxy will it be smooth or rough feeling and how do you avoid in ripples or dimples in your epoxy as it sets or drys

[@MinderellaCreations]

Robin Cook I answer some of that in this video. I do thick coats so it’s pretty smooth after first coat.

[@robincook7209]

Minderella1225 ok I am watching it now I did my first cup and and it was rough the first coat but I did do a thin coat and then once it cured I had a lot of ripples and dimples and I guess you call them fish eyes not sure what they are lol

[@MinderellaCreations]

Robin Cook Too thin of a coat can cause dimples. Ripples are usually caused by the top side shifting over the underside because it’s been hit with too much heat and has cured more quickly than the underside.

[@anniewest1976]

I was wondering do you have to use a heat gun/embossing gun? I used it once and it made my smoke alarms go off. I read the reviews on the embossing gun that I purchased and some people said that was a issue at first. I'm scared to use it again. Lol. Also, on two of the cups I've done, I have gotten the ripples/waves but didn't use a heat gun. I've wet sanded them hoping that doing so, and putting another coat of epoxy on, would smooth out and then I could apply my decal. Hasn't worked. Can I use a hair dryer on low heat? Thank you so much for all your videos and helpful tips. You are amazing.

[@MinderellaCreations]

Setting off a smoke alarm isn't normal. lol If it's doing that you are likely holding it on one area too long and it's curing your epoxy super fast and it started burning it. Don't do that. :) The wave and ripples can also come from imperfections in the surface or something on it. The majority of the time I've seen it is happening because of heat applied or your room being too cold and the under side curing faster than the outside in the room air. Here's a link that has some notes on it too: promarinesupplies.com/blogs/table-top-epoxy-troubleshooting/troubleshooting-for-uneven-surface-with-ripples-or-waves-after-curing

[@anniewest1976]

Minderella1225 the cold air could explain the ripples. I live in AZ and it's hot already so I have the ac on. I'll move the turner to the other side of the room where it's not as cold. Thank you so much for your quick response.

[@MinderellaCreations]

Yep, I keep a thermometer next to my turners and if it isn't 75+ I don't epoxy.

[@anniewest1976]

Minderella1225 that's a good idea. I'll try that as well. Can I use a hair dryer?

[@kimhoward582]

Thank you so much

[@lisabailey5373]

Hello I was wondering where you got your spinner?

[@MinderellaCreations]

Lisa Banks I built two and bought two from glamour tribe customs.

[@sasha6261]

Do you remember what font you used on Cassidy?

[@MinderellaCreations]

sasha6261 Carrolinas EDIT: I was wrong...I looked back and it is actually Emerson font. :)

[@craigjen05]

Also, may I ask were you purchased you electric tumbler turner?

[@MinderellaCreations]

Jenny Billings I made it. 😊

[@jamaldeenashraf5570]

I room 10×10 how epoxy A&B to mix and how long take to dry please let me know thank you.

[@MinderellaCreations]

I’m not sure what the first part is asking. The epoxy takes about 6 - 12 hours to become hard to the touch. You should wait 72 before delivering/ shipping.

[@sherrystorm9820]

can u use a hair dryer that gets hot on low ?

[@MinderellaCreations]

Sherry Storm Not a recommendation to use hairdryer. It can blow dust into your epoxy.

[@carmenrios4081]

Hi minderella, my question is . What if it is still cloudy, what did I do wrong?

[@MinderellaCreations]

Carmen Rios If it’s white you may have used the wrong Epoxy. May have Alumilite cast instead of clear cast. I’ve seen people do that several times.

[@dwaynegustafson2248]

Carmen Rios n

[@adriennahuizar6598]

I’ve been so frustrated with tumblers I can’t seem to get them to work, but after seeing your video I feel like I can do it. Patience and practice. Do you epoxy in your home? What would you recommend for doing epoxy in garage? Kind of a dumb question but I really want to do this. Thanks again

[@MinderellaCreations]

You can do it! I suggest doing research, reading through the TDS (Technical Data Sheet) and SDS (Safety Data Sheet) and determine what personal protection equipment (PPE) is Right for you. I personally have an air filter and wear a respirator. I’ve read that it’s necessary to have an air filter system to take the air out and bring clean air in and wear a complete suite and full face respirator. I’m still doing research on that.

[@adriennahuizar6598]

Hi 👋 Minderella Creations, I keep getting fish eye or those tiny tiny little bubbles on my cup. I’m about to throw in the towel of cup making. Help me 😩😂

[@MinderellaCreations]

Adrienna Huizar Fish eyes I go over in this video. It can mean too little epoxy, contaminants on the cup (oils, particles, fingerprints etc) or temperature isn’t in the ideal zone.

[@MinderellaCreations]

Adrienna Huizar Microbubbles need a torch. Stir slower.

[@adriennahuizar6598]

Minderella Creations should I clean up the cup with alcohol before the next coat of epoxy?

[@melissapalmerton5381]

How would it work when you have a 4 cup turner with hear gun?

[@MinderellaCreations]

Melissa Palmerton It would be tricky for sure. You’d have to try and spin it individually per cup before spinning entire thing. I’m a fan of the individual turners.

[@sandraedwards9489]

I've been watching your videos and I noticed you use FX poxy can you give me some tips on how to not have so many bubbles, I stir slowly and I follow the directions yet when I put it on my tumbler I get a lot of tiny bubbles and a heat gun does not pop them, please I need help. Thanks

[@MinderellaCreations]

Try a torch. It works better because it’s hotter. Tips for how to stir epoxy and lots of stuff in here.