mini Airbus A320 RC Plane build DIY

How to make Cartoon Airbus A320 RC airplane Complete Build DIY video tutorial
Funny fatty EDF airliner deformed scale model (Foam Cutting ASMR 😊)
Maiden flight • Cartoon Airbus A320 RC...
Wingspan: 762mm (30")
Length: 690mm
Flying Weight: 285g
Materials: XPS foam 3-5mm (Depron)
Electronics list and Free Plans: numavig.com/pl...

[@pabloricardodetarragon2649]

The master of the folded foam, my jaw dropped. I had to see twice the video. That's upper level design, engineering and ability.

[@madhukarjonathanminj2772]

You should also check out Julius Perdana,if you haven't already.

[@lt.williamcrowecrowe2505]

Its a russian with depron, what did you expect?😜😂

[@Problematic_Polygons]

airbus a-3, change my mind

[@air-headedaviator1805]

This little model has some of the best engineering and building I’ve yet seen in a foam scratch build

[@oldflyingman7581]

Definitely. A master in foam building.

[@k.o.0]

Wow! This is your most complex design ever! Beautiful rib wings with spar, EDF motors, great cable management and front nose steering. Awesome flyer, just stay clear of that snowplow next time!!

[@radcontrols3d115]

Процесс изготовления шикарный!!!

[@BlackRedsPlaneSpottingChannel]

The appearance and sound of that mini A320 is SO CUTE!! Especially at 0:23!!!!

[@Tsnafu]

You're the RamyRC of depron - another success!

[@donbobskiy]

Меня больше всего поражает точность, с которой у тебя с первого раза удается состыковать детали. Глазомер и точность движений просто нереальные.

[@alibulletinway6279]

The mini airbus a320 looks so cute

[@captivenut4122]

This looks deciptevely simple, but it really isn't. Your best design so far I think. Making it look easy, is what makes you a true master! Can't wait what you come up with next!

[@pavelgurenchuk2225]

exactly, need sometimes experience that make this models. I do parallel two or three tings at the some time.

[@marterair551]

Awesome work, I'm a papermodeler/ designer, how hard is it to create a depron model from papercraft templates?

[@NumaVIG]

if the templates are correct it is not very difficult, you saw the whole process on video

[@MrPiromaer]

Excelente creación, enhorabuena por tan buen desempeño al construir, me divierte mucho verte por que así aprendo muchas técnicas par mis creaciones, gracias por compartir estos videos, mi hijo y yo lo vemos cada vez que subes tus videos. 👍👍👍👏👏👏 Saludos y bendiciones...

[@СергейБогданов-п4б]

На фоне остальных тобою сделанных, эта модель на порядок выше. Круто!

[@randall4411]

This is the coolest fat little airplane on the planet !

[@dragansus1]

При наличии прямы рук, из потолочки можно сделать достойную модель👍 Посмотрел с огромным удовольствием, видно как растёт скилл и сложность моделей!)

[@artem56881]

Это не потолочка, а xps подложка

[@JoseManuelNietoSanchez]

Does it really fly?? I'm missing that part so much. Congratulations! You're THE MASTER.

[@NumaVIG]

kzbin.info/www/bejne/gp2xlXh9nMSnfdU

[@robertwong2412]

Nice EDF build. Would gladly appreciate if you can make a HABU style EDF jet (64mm) if possible. I've never seen that kind of scratchbuilt edf jet.

[@user-ko1uz4lg1v]

23:30 Очень крутое решение, чтобы с элеронами не возиться. Взял на заметку

[@alexanderalexander3474]

Зашибенный эйрбас. Всё как я люблю. 😁

[@ricochete9459]

@NumaVIG Real works of art you have made from styrofoam sheets. Could you add the aeromobil to your list of flying wonders? It will be another challenge to your talent. And another gem for your collection

[@panoeconomou2017]

Please make more of these airliners💯 they are excellent 🙌

[@daviddavids2884]

oh, yeah, right. bigfatcargo planes are Soooo exciting. NOT

[@panoeconomou2017]

@@daviddavids2884 I don’t know who the hell you think you are. You sir, sit here and bully everyone’s channels and creations including mine. You do not have the right to smack talk everyone including me. Your words don’t mean anything other than trash so please don’t bother with your ugly, rude and uncalled for words

[@sandyfeetgore1405]

I like your videos with the take in the DIY store ;-)

[@LordMarinade]

I wanna ask for a long time, what's the Titan glue like when it dries out? Is it more hard or very silicon-like? I once bought a very viscose glue that was just like a silicone when it dried and the result was horrible, everything glued didn't really hold for a long time.

[@NumaVIG]

Titan harder than UHU Por, sometimes it's good, but not always.

[@БрезгинГеоргий]

Это настолько круто! Если бы можно было, 10 лайков бы поставил! Продолжайте творить!!! В будущем хотелось бы увидеть и другие модели пассажирских судов😎

[@terryblackman6217]

Brilliant. You make this look so easy. 👍

[@Любопытные]

Шикарная постройка! 10:26 интересный девайс! Самодельный или покупной? 😏

[@NumaVIG]

kzbin.info/www/bejne/l2PPmoSNf7Wjoq8

[@Любопытные]

@@NumaVIG Спасибо! Пропустили это видео!

[@adiletruslan3796]

this is very cool thanks I like you❤

[@cutebaby8767]

🙏🏻🙏🏻🙏🏻🙏🏻❤️❤️❤️ 🤗🤗🤗 You are awesome 😎

[@konggao9164]

what ingredients we need to build a same type aircraft?

[@HaznieModelAviator]

Beautiful build 🎉

[@antoniorausa9695]

Numa, you are a crazy good designer and builder, but your plane are always really slow, maybe you should try to build a fast plane, with 3 or 4 s battery and 2000kw motor, it would be really cool.

[@elymisany]

Clearly hes more interested in designing and building planes than flying them

[@greglewis20]

Excellent engineering technique. Using your methodology I would like to build a scale 1/72 or 1/32 A320. Any thoughts or advise?

[@Tigradetka]

О, дружище! Приятно, что кто-то по моим чертежам работает (имеется в виду носовая часть)! Респект!

[@NumaVIG]

я пока только цилиндры и конуса освоил 😂

[@Tigradetka]

@@NumaVIG лиха беда - начало! Пепакуру все осваивают с простых фигур (а уж там и поверхности двойной кривизны освоятся) :)

[@dimamariankov1929]

how do you design the blueprint for this modell to fold? What kind of software?

[@Pol93212]

A3.. convince me to change my mind.😂

[@mjg22]

Now I’m building this model. Q: there are no templates for the ducting parts seen 12:50 and later? Just DIY? Thanks anyway for the video and the templates.

[@modelarskiepasje7574]

This planes are your own projects?

[@NumaVIG]

yes, except nose

[@oneistar6661]

Woooow, what a Sunday :) Thank you for sharing.

[@ciuciek0690]

try to make a-10 warthog

[@tibib4029]

Hola! Que pegamento usas ???

[@everythingrc5652]

THIS LOOKS AWSOME

[@onlyaction110]

Which motor use for 1kg plane

[@kianoosh1507]

Good job 👌

[@李錫秋]

製作非常細膩

[@Tigradetka]

Подскажите, хвостовую секцию к центральной части фюзеляжа не приклеиваем? По аналогии с носовой? (нос понятно нужен съёмным, чтобы к акуму и приёмнику доступ был, а в хвосте доступ к рулевым машинкам оставляем? Заранее спасибо за ответ!

[@NumaVIG]

хвост приклеен в самом конце, когда все настроено и четко работает

[@Tigradetka]

@@NumaVIG благодарю!

[@Tigradetka]

Подскажите, как с тяговооруженностью у "арбуза"? Подойдёт дли для установки камеры под FPV? 18:44 Обратил внимание, что Вы управление двигателями на разные каналы подключили, а почему не стали пользоваться разветвителем?

[@NumaVIG]

тягу не замерял, смысл в разветвителях ели каналов у приемника хватает? тем более 2 мотора миксуются с руддером в разнотяг, видно же что он почти на месте разворачивается

[@guibellodi]

Congrats, foam wizard! What was the final weight and engines thrust?

[@NumaVIG]

I didn't measure thrust, I think 150-200g per motor

[@MegaSuperJaBaTo]

Awesome work, so cute!

[@RRispro]

What foam is that?

[@forrsill9628]

Amazing video! What size your sandpaper, anyway?

[@NumaVIG]

P100-P400

[@wyarisucisuci57]

You should use hot glue to quick responsip

[@daviddavids2884]

responsip ??? if YOUR only option is hot glue, fine. but, hot glue is HEAVIER than other adhesives.!!!!!!

[@daadood100]

Your recently design this plans but how to down load it. there is no link to download expected in PDF at least other wise is garbage

[@mjg22]

Love it… must build it…

[@AEROERGO]

This is porn for any DIY foam builder!, it´s awesome how simple you make it look. Always clean and seems to have everything you need at hand. I wonder how do you stop the front landing gear to pop up without a stopper in the lower side.

[@gasperbucinel]

Make full sized model

[@rcpowres]

Really good job!!!!

[@miixus444]

Good work, keep it up

[@vladimirf5j731]

Уважаемый коллега, скажите кто производитель этой плитки и где покупали. Удалось рассмотреть на этикетке ( единственная моющееся ). Спасибо.

[@NumaVIG]

www.solidgroup.ru/catalog/plita_potolochnaya/s1000_plita_potolochnaya_belaya_ekstrudirovannaya/

[@vladimirf5j731]

@@NumaVIG Большое спасибо, Сегодня нашел и купил.

[@nuessgi22]

F A N T A S T I C !!!

[@Tigradetka]

Уважаемый NumaVIG, хотел спросить Ваше экспертное мнение: если увеличить среднюю секцию фюзеляжа до размеров А318 - это примерно на 10,5 см длиннее Cartoon Airbus получится, сильно ли поменяются характеристики модели? Возможно ЦТ сместится, а вот в полёте сильно ли будет отличаться от "пузатика"?

[@NumaVIG]

тогда и крыло удлинять надо, есть определенные пропорции, а так на крылатую ракету будет похож. ЦТ от характеристик крыла зависит, фюзеляж роли не играет

[@Tigradetka]

@@NumaVIG Благодарю!

[@Gr4cer001]

No way the a3 🗿

[@aminaami4142]

is mini airbus a380 rc plane can fly by emax eco micro 1106 2s 6000kv cw brushless motor for fpv racing rc drone

[@madhukayanadath4942]

please replay

[@JimmyZeng]

This is like a plane for Arale from Toriyama Akira.

[@aminaami4142]

where did you get from the emax servo motor

[@maks1o]

Are you ok there Numa?

[@JoseManuelNietoSanchez]

Wow.

[@easy_3d]

Amazing 😍

[@ColinBeckman]

do you sell your plans

[@deepsarkar2959]

Sir can you make a edge 540+

[@modelarskiepasje7574]

Build Ki-61 or (not mini) bf-109

[@guillermospindola2685]

Que material es gracias

[@RC3Dgeek]

Top!!!!! 👍👍😉😉

[@aminaami4142]

is a320 Airbus rc plane how much mm is this sheets

[@helicopterovirtual-msfs6254]

👍👍👍

[@madhukmadhu8040]

in your A320 air bus rc plane can you sent the plan of this plane

[@Thepilotangel]

*A3*

[@mr.lukaku2335]

I will be happier if would help me to find the CG of the rc plane model. Thank you

[@NumaVIG]

www.google.com/search?q=center+of+gravity+symbol

[@mr.lukaku2335]

@@NumaVIG sorry sir I dont understand the link you sent..

[@NumaVIG]

@@mr.lukaku2335 find this symbol on the plans

[@mr.lukaku2335]

@@NumaVIG oh I see, thank you very much sir..

[@mr.lukaku2335]

@@NumaVIG btw, do you have the plan for airbus A318? I love your plan very simple and easy to make..thank you.

[@radityarazkyano]

Hi bro, can i get this file? Thx

[@NickRcPlane]

Can sent me drawing...i want copy...if you can sent to me

[@annalydiamagallanes1515]

Can you built me a rc b 747 only 3 channel

[@madhukayanadath4942]

is Airbus A320 rc plane making 5mm deprone foam

[@NumaVIG]

3,7mm

[@sapsshock734]

Asmr

[@maxencebraud-devincey6952]

Can u do a ww2 plane next pls?

[@NumaVIG]

La-7 in progress

[@Snartblade]

@@NumaVIG Ла-7 тоже толстячок будет? Он же тогда будет как И-16)))

[@NumaVIG]

думаю по бумажной технологии серию нормальных истребителей сделать

[@daviddavids2884]

i would SUGGEST that you look at his OTHER videos, before making a dumb request.

[@jubayerhossain8694]

Sir please make a fighter plane

[@daviddavids2884]

dude, apparently, you have NOT looked at his Other videos.

[@ivanespiniza6459]

Quiero que diseñes un avion biong 700

[@Night_Assasin_13]

Its so short though😂😂😂

[@artem56881]

Требуeм a-10

[@jocax188723]

A320? More like A302…

[@dumbass12342]

Random people: it’s not ScAle

[@mauroignacio3907]

show top.

[@prep0wer]

extra wide-body plane

[@RCCC_DIY]

22:52 а где такую краску купить можно?

[@NumaVIG]

www.google.com/search?q=decola

[@user-lv9nf8fd7e]

У вас в магазинах навалом материала. С какого вы города????

[@NumaVIG]

Максидом, Leroy Merlin, OBI, Alnado шлют свой пенолист по России

[@Tigradetka]

@@NumaVIG у Алнадо шикарный материал! NB У нас в Леруа никогда не было белого пенолиста, даже серого не привозят! Только оранжевый можно купить, а в других стройматериалах - зелёный и синий. Вот такое богатство :)

[@ZuhayrMirza]

This is airbus a3

[@jonathansandy2192]

Airbus a3

[@carlosalberto-sv9fm]

Que programa vc usou pra fazer os moldes ?

[@NumaVIG]

Blender + Pepakura

[@carlosalberto-sv9fm]

@@NumaVIG ok mais onde vc conseguiu o objeto 3D que é o avião pra importar no pepakura ?

[@sapsshock734]

Asmf

[@nowee_playzz4931]

A311

[@jeanetteashanti2171]

? p̷r̷o̷m̷o̷s̷m̷