Mini jet boat

[@rickems8863]

Totally banger of a vid boys ! Production values are 1000% cool ! ! ! Interesting storyline , garage work , , multiple brothers , long and short term updated on daily operations and projects, experimental mods , cliffhanger, y'all got it all . keep up this and you'll be picking up da subs like candy . sweeeet! only , could use more social interaction with other brothers, less lurking in the inky shadows. Your presence always contributes positively. Even /especially as a camera man /personality . maybe a touch more excitement, wow moments . But Really Impressed overall , stepping up the game 1000%

[@calebforslund1348]

Rick Ems Really glad you like the vids; I’ll have to remember to get a PO Box sometime. 😉😉😉

[@jasonskibrothers2192]

As always great input. I think the lurking in the shadows is because we're trying not to ruin the take, and we don't like acting more excited than we are. That being said, it is KZbin, so we should probably embrace it....or maybe embrace lurking in the shadows 🤪

[@86047RVMan]

Get rid of that throttle cable sticking up in the air... put a pedal on the floor. You need some trim tabs to make it ride smoother and not bounce so much...

[@ChrisJones555.]

You guy's have some sweet toys! Also having a house right on the water your so lucky.

[@brandonhanny2786]

Love your videos hope you guys stay safe.

[@calebforslund1348]

Brandon Hanny You too. 😁😁😁

[@mickotoole4795]

Watch those landmark STICKS ...🤣🤣🤣🇮🇪🇺🇸🇮🇪♥️♥️water like glass...love the racing stripes on the front 👍👍👍👍👍👍👍👍👍👍👍👍👍👍♥️♥️♥️♥️♥️♥️

[@dmett3828]

Holmes you got to Route those cables a little better,, run the steering cable through a piece of half inch or 3/4 tubing fastened to the hull in the trouble spots. Also got to do something with the throttle cable maybe the same type of thing. No knock on Rob he rock and roll's. Rock on🤘🤘🤘🎸

[@SuperVettefan]

I need this in my life .

[@codyswartz997]

wonder if it needs some hydraulic trim tabs to go along with that boat to keep it from bouncing? why not use a Yamaha 760 engine might be easier and cheaper to find not to mention very reliable...

[@joegangemi3498]

Super crash is cool want to see a lot more on that.

[@WinDillus]

Rob needs to put that trim lever on the opposite side of the throttle. Then you could trim it while your rippin’ 🤙🏻

[@JetSkiBrothers]

Dallas Herndon that would be pretty cool

[@firstpitstop]

What brand boat is this? Is it a kit boat or homemade? I have a mini jet boat powered by Yamaha 650 its a 94 jet n spray fiberglass boat about 11ft long made by Eckler water sports and was wanting to get a tower for it similar to yours. I like the one you have on yours looks really nice. Hey maybe adding some insulation on the inside ofthe aluminum would help with the loud hollow sound like the foil insulation type used on car doors to insulate the speakers.

[@r2d2326]

That the boat with the Zxi 1100 motor? (Never mind I was typing as I watched and then you answered in the vid 🤣

[@mickotoole4795]

Mick o toole here again ...I have to have a word with my jet ski BROTHERS ..I told them I'm the production manager...OMG WHERES CELEB ...PROBABLY ASLEEP 💤💤💤💤💤💤💤💤😮🤣😎🇮🇪🇺🇸♥️😎👍👍👍♥️♥️♥️♥️♥️♥️♥️

[@Jacobskibros]

I think you are intimidating him!

[@calebforslund1348]

Yeah, that’s the thing. Just because I’m “asleeep” doesn’t mean I can’t get up. I’m glad that you’re such a passionate fan of the JSB franchise, believe me, I am too. But the reason I’m the manager is because I’m actually family. Really, we both have great, amazing ideas; but it’d be my blood that gives me the edge. I’m sure that if you wanna help, we can think of something. 👍🏼👍🏼👍🏼

[@mickotoole4795]

Lison blood...brother from another mother I'M THE PRODUCTION MANAGER AND I ALWAYS WILL BE dream on I'm watching these guys before you were even though about 🤣🤣🤣🤣🤣I think I'm annoying sum body......aaaa celeb knight knight 😭😭😭shush🙉🙊🙈👶👶👶👶👶👜

[@CleetSquad]

If he welded in the pump shoe you can fit a 140 pump from a 750 zxi in the same shoe.

[@nigelmielke4706]

Did you buy a kit or fab the hull? This is cool looking!

[@JetSkiBrothers]

Made it from scratch

[@nigelmielke4706]

@@JetSkiBrothers Right On

[@thrillbillyjp1]

I think I would rigid mount that jet then fab up a solid mechanic le rudder sys

[@thrillbillyjp1]

I'm curious how do u plan on having only single cabke it's not gonna turn two ways

[@mk2driver13]

So awesome guys. Where in Washington are you. I’m in Tacoma. If these do take off in production. I’d be interested in swapping my rxp 300hp motor into one

[@JetSkiBrothers]

christian martindale we are about 20 minutes north of Everett

[@cookiewookie1311]

Where do I buy one. I NEED TO KNOW

[@calebforslund1348]

26:47-26:57 If you see any shorts lying around out there... *THEY’RE MINE!!!* 😂😂😂

[@calebforslund1348]

I got 2 questions. One, when the coronavirus crisis is done; can I drive the boat? Second: WHERE’S MY CANDY?!? 😂😂😂😁😁😁😉😉

[@jasonskibrothers2192]

I think your aunt Candi is at her house

[@calebforslund1348]

Jason Ski brothers She’s a nice woman, but you know what I mean Jason, COME ON!!! 🤦🏼‍♂️🤦🏼‍♂️🤦🏼‍♂️

[@John-kp1ql]

I think you should put the 1800 inside instead of changing the prop

[@mickotoole4795]

AAA Snap just replaced sterling cable on the 1200 yama .TODAY.👍👍😎😎😎😎🇺🇸🇮🇪🤣🤣🤣♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️

[@The3Elements]

Why not the 1100 tripple Installed ?

[@JetSkiBrothers]

Modellflug4me haven’t got around to it yet

[@andyjones1562]

Can you sell it in a kit form !!!

[@JetSkiBrothers]

Maybe

[@Crazystuffyousee]

Nothing about this looked like fun. Bouncy, constantly porpoising, under-powered, and kinda makeshift too. Sorry but I'd just rather ride a jetski and enjoy myself...

[@jasonskibrothers2192]

You should let Jason drive the jet boat. I know, watch till the end...