Mini Steam Engine Generator - Vertical Hero's Steam Engine DIY KIT [ ENJOMOR ]

In this video I unbox and put together a Vertical Hero's Steam Engine Model with Boiler DIY KIT, I also attach a generator to the steam engine. This is a simple concept and example for charging of a battery with a model steam engine if a situation comes up. It will need some modifications or a smaller generator to work properly, I have a solution to make this work and have a usable voltage, I will post when possible. Do not use a torch to heat your boiler use the recommended 95% alcohol only. This DIY steam engine kit is perfect for anyone interested in steam models, students and kids with supervision. My review of the Steam engine kit: The kit is very well made all the parts are made of brass and steal, there are roller bearings on major parts. This is a beautiful working model and I would have loved to of had one of these engines when I was a kid. This is not a toy but a fully working steam engine and I really enjoyed putting it together.
This engine should last a long time with a few drops of oil before use on the moving parts, no need to oil roller bearings. Check out there models and engines they will blow your mind.
Thanks for Watching! ‪@kurtscottage‬ if you're new to the channel Please Subscribe and turn on notifications, it really helps the channel grow.
This was a sponsored video, stirlingkit.com sent me this kit to make a review.
( disclaimer ) Links Below for the Steam engine Kit if you click on any link and it's active, it will send you to stirlingkit site, if you purchase anything from there website I may receive a small commission on a sale later on in the future, this will not effect your price in any way. Also there is a 10% off discount code below.
Extra 10% off code:Kurt
Steam Engine：bit.ly/5E4RF4E
Buy more：bit.ly/S5DW7SW
Stirlingkit Gift Guide: bit.ly/WDEWR3S
I'm always working on new projects / videos but sometimes weather, work and personal life can set me back on making new content. Please bare with me more videos on the way, I'm posting some more short videos to try and grow the channel but I'll be mostly focusing on long videos. I'm trying more Short videos they are way easier and faster to make so I'm hoping they will help grow the channel faster. If I can boost up the audience than I can start building the better projects I have planed. I have a ton of ideas for new builds and want to share my ideas with everyone. Take Care

[@Science-Vlog]

u need air core generator, build using thin wire 500 ~ 1000 turns two powerful neodymium magnets

[@emil.honganmaki5461]

There is no power at such a low pressure and the silicone tube still cannot withstand higher pressure, etc

[@natebaird]

Perhaps a larger sprocket on the steam engine would help lower the torque requirement.

[@noericardo1490]

Nice, these motors are very cool, congratulations, I will wait for the ebike with gas generator! Peace ✌️

[@kurtscottage]

Thanks 👍 I've gathered some parts, hoping to have one built by spring time. Ebikes in the winter where I am aren't so much fun..

[@Science-Vlog]

it cute

[@rickbrasche8781]

I want to add a generator to mine too

[@dorotheaseiser3227]

promo sm ❣️

[@maccabeus-everydaysurvival5828]

Very cool

[@kurtscottage]

Thanks 🙌