Mini Table Saw with Stanley SJ60 Jigsaw [woodworks]

[@tam15850]

Good idea, but the title should be "under table jigsaw" and not "circular saw at table", in french "Scie sauteuse sous table".

[@dekayscrafts]

Thank you for letting me know. I made a mistake in translation. But I can't modify it. So I'll put your comment on the top =)

[@tam15850]

@@dekayscrafts There is only one that never does anything that never gets wrong. The installation of a table saw under table has not yet been filmed. This could be a good idea. Have a nice day.

[@MikeOldani]

When installing a jigsaw into this box configuration, it becomes closest to what's known as a scroll saw. It could be a low-cost substitute for a band saw. The hinged blade guide is a brilliant reuse, very well done!

[@KodyKimani]

I understood it as a mini table saw alternative... the title made me click on it and I love it!

[@snarkfinder2621]

I reckon that this must be the simplest and the best design for a jigsaw table I have seen. Very nice.

[@hanse2522]

직소의 약점인 직선 절단을 위한 자가 공구를 만드셨군요. 원형 톱 테이블소에 대한 거리낌이 있고 작업량이 많지 않은 취목 하시는 분에게는 유용한 아이디어 입니다. 그 뿐 아니고 이런 저런 원형톱 가이드를 개발 응용하시는것을 보니 아이디어가 풍부하십니다. 목공에 관심이 있는 초보 취목으로서 참고가 되었습니다. 감사합니다.

[@dekayscrafts]

감사합니다 ^^

[@MrGonzach]

Muy bueno Dekay's

[@LordOfThunderUK]

Excellent work, I may adventure and make it myself.

[@philipandaki5962]

와 이건 역대급인듯 해요ㅋ 하나 만들어야겠어요ㅋ

[@dataphool]

A brilliant design. You have converted a hand tool to a table tool.

[@mykolashatkovskyi8817]

Just watched it the 3rd time and it keeps hypnotizing me!

[@ladykenja2700]

- Excellent idea & craftsmanship.

[@jeanloreaud9282]

Très joli travail bravo à bientôt salut Jeannot 🛠😉

[@dekayscrafts]

Bonjour ami merci beaucoup

[@Rick_Sanchez_C137_]

If you needed a longer bladed saw you could do this with a reciprocating saw/sawzall…… Another great video.

[@markhedquist9597]

Nice! I like the hinged blade guide feature. Very ingenious!

[@younkyoungpark8378]

이건 진짜 최고네요!. 밴드쏘 쓰다가 날 끊어질걱정 안해도되고. 원형톱의 무서움도 별로 없고.. 꼭 만들어보고싶네요!!!~

[@goriano06]

Très belle réalisation et d'une précision de coupe excellente. J'aimerai réaliser ce projet, mais sans les cotes c'est assez difficiles à réaliser. Pourriez vous communiquer les côtes ? Merci d'avance et encore grand bravo. Je regarde toutes vos réalisations.

[@خالدالمعلا-م5ل]

Nice and special work

[@rosariomusumeci3615]

Very good design. However there is not much clearance in the thickness of the board to be cut. Perhaps you can upgrade it with new modifications?? Just a suggestion. Thank you.

[@brucevov1]

I can say 1 thing you are a Stanley man Another well done job

[@dekayscrafts]

Thank you :-)

[@seabex5162]

A really good Jig for Stichsaw. bravo

[@dekayscrafts]

Thank you =)

[@krisbour5130]

SUPER merci bonne idée

[@thelce49]

You are very creative and capricious. Congratulations!

[@dekayscrafts]

Thank you =)

[@fabiolarios1536]

Estoy fascinada con tus vídeos, con todo lo que primero imaginas y luego lo creas 👍💯👏👏👏👏

[@GianniRaspa]

Ottima soluzione per un utilizzo identico ad una sega a nastro. Però un poco più elaborato sarebbe stato eccellente.

[@eng.samirabid3152]

Very good job

[@dekayscrafts]

Thank you =)

[@zodziusavas]

This setup is quite unique... I never seen this setup before on youtube. Very inspiring. I like it allot. Really nice. Thank you. Your channel is a real Gem.

[@dekayscrafts]

Thank you for your warm comment.

[@franciscomunoz8991]

Felicitaciones por el trabajo.Tengo una consulta donde consigues esos apretadores ,que usas en varios de tus proyectos.Saludos desde Chile

[@dekayscrafts]

abrazadera de palanca =)

[@hobidiy]

love it...very usefull..good work

[@dekayscrafts]

Thank you =)

[@엄청난달고나]

손제주 좋아요 보고 마니 배우고 있습니다😃👍🏻👍🏻👍🏻

[@dekayscrafts]

감사합니다~~~

[@maggiem4734]

Very nice! 👍🏼

[@dekayscrafts]

Thank you =)

[@flx6470]

Very cool! With more time and space i will rebuild this! Thanks for showing it :-) best regards from Germany

[@edilsonlozadaacosta4231]

Buen trabajo, saludos desde Colombia

[@tims6845]

Хорошая идея. Отличная работа!

[@asabkim400]

정말 깔끔하고 멋집니다

[@dekayscrafts]

감사합니다 ~~

[@dangerousbear4658]

Good job Son...

[@김장수-j5f]

금손이시네유 정밀도가 저정도 나오시다니 ㅎㅎ

[@dekayscrafts]

감사합니다~ 사실 살짝 삐뚤었어요 ㅋㅋㅋ

[@daviddelgadillo7558]

Todos tus trabajos buenos el problema son medidas en todo

[@jailtonmottacotia4120]

Vejo todos seus vídeos e aprendendo muito. Parabéns! Deus te abençoe!

[@chriswhite4596]

Your a Genius 👌🏻👏🏼😲

[@dekayscrafts]

Thanks =)

[@ubiratanoliveira692]

Muito bom, se não se importar, vou copiar seu projeto. Parabéns e obrigado por compartilhar.

[@dekayscrafts]

Muuuito obrigado :)

[@vincentkessels2562]

That looks really nice! Do you have (Sketchup) plans available?

[@taehyunkwon7261]

김팀장님 감사합니다~~~😎😎

[@dekayscrafts]

감사합니다~~

[@산골로간잡부]

크~~대단하세요 뮤찌십니다

[@dekayscrafts]

감사합니다~~

[@forwardsmall1860]

보는 내내 와~~~~ Wow~~~ Ops~~~~

[@dekayscrafts]

감사합니다 ^^

[@joseantonio-uc2jh]

Muy bueno, gracias

[@dekayscrafts]

Muchas gracias

[@포르투렐루]

멋진 아이디어네요. 구매하고 싶을 정도로..

[@dekayscrafts]

현욱님 좋은 말씀 감사합니다 ~~

[@luisgiovannyjaimesbello927]

Great video, what kind of wood do you use?

[@radikchamidullin3319]

молодец классно получилось !

[@dekayscrafts]

Спасибо!

[@Tosnowood]

Nice machine, man)

[@dekayscrafts]

Thank you :-)

[@whitetiger1683]

HI！　NIce idea and nice work.It looks very useful!! Great woodwork!

[@dekayscrafts]

Thank you =)

[@KodyKimani]

Do you not need to be able to raise and lower the blade guide? I would love if you said you don't need to lol

[@lebedes13]

Класс! Но надо торцевой подшибник к пилке, а то об фанеру тереть начнет и греться.

[@dekayscrafts]

Спасибо за хороший совет Я буду развивать больше

[@lorera1713]

Hi! Congrats you are my idol:). Please could you tell me where I can by your red square 90 degrees? Tks. Bye from Italy

[@마치-w6v]

언제나 기대이상의 결과물을 보여주시네요 !! 영상감사합니다^^

[@dekayscrafts]

감사합니다 ^^

[@최현정-c8d]

amazing!!

[@dekayscrafts]

Thanks =)

[@Berion189]

What bore size is the ball bearing and why do you have to put it?

[@zzim-jl5li]

진짜 대단하시네요 따라해보고싶은데 도면이나 치수알수있을까요?

[@dekayscrafts]

죄송해요 이거 오래된거라 도면이 없어요

[@АндроРемонт]

Защиту из оргстекла на пилку не помешает в целях безопасности. В целом хорошая работа и достойно похвалы.

[@rogerio160771]

👏🏽 👏🏽 👏🏽 👏🏽 👏🏽 👏🏽 👏🏽

[@박진호-n4e]

많은 도움됩니다

[@dekayscrafts]

감사합니다 ^^

[@bif8731]

혹시 제작 도면을 받을 수 있을까요?

[@ОлегС-к6ж]

👍

[@ЖАКСЫЛЫК-и7ъ]

👍👍👍

[@haraldgombert3135]

😳👍👍👍

[@karabas09]

Отличное исполнение! В каком городе живёшь в Корее? Если не секрет

[@dekayscrafts]

Я живу в Сеуле, спасибо.

[@karabas09]

@@dekayscrafts Это интересно!Сеул большой, в каком районе?

[@daviddelgadillo7558]

Medidas y planos sería bueno maestro

[@deibyhernandezmelendez9575]

Excelente 👍 💯

[@alanfujimori1127]

So we!l thought thru......beautifully done.

[@jafafarinha22]

Muito bom projeto, só inverteria o lado de abertura da dobradiça, isto para quando a serra fosse pressionada ajudaria na estabilidade da mesma.

[@dekayscrafts]

Muito obrigado

[@잡초-v9x]

김팀장님 항상 구독하고 있습니다. 정말 대단하십니다. 질문: 아래.위 고정 철물들은 어디서 구입하나요?

[@dekayscrafts]

저는 인터넷에서 주문해놔요 토글클램프라고 검색하면 종류별로 많이 나와요~

[@잡초-v9x]

@@dekayscrafts 감사합니다. 행복한 주말 되세요

[@고형순-q3f]

한번 작업실 구경좀 시켜주소~~ 맛난거 사갈게...^^

[@dekayscrafts]

형은 아무때나 카톡하지 왜 ㅋㅋㅋ 옆동네 계시면서~

[@배현수-c5i]

김팀장님. 철물 뭐로검색해야하나요 지금. 하나따라만들카해서. 철물좌표좀부탁합니다

[@배현수-c5i]

방금다른사람질문에서 해결했습니다.

[@sh5708]

Молодец👍

[@dekayscrafts]

Большое спасибо 👍

[@benjaminponte1682]

Where can i find the plans for this gadget? Please, advise

[@watsonjesus6157]

Parabéns amigo por essa ideia ficou maravilhosa valeu

[@dekayscrafts]

Também sou muito grato.

[@행쌤]

하나 사고 싶네요ㅋㅋ

[@dekayscrafts]

감사합니다^^

[@eh_geun]

사용하시는 끌이 무슨제품인지 알고싶어요 ~~!!

[@dekayscrafts]

철마 끌 입니다~~

[@zuvisvasaris8661]

👋👍👍👍

[@fernandomarcano6804]

Great job. How cant buy Tulex square

[@dekayscrafts]

Search for Amazon or Ebay =)

[@장유빈-p6x]

볼베어링은 내경 몇짜리 쓰신건가요???

[@dekayscrafts]

정확한 치수는 모르겠지만 나사 들고가서 끼워보고 샀어요~

[@장유빈-p6x]

@@dekayscrafts 근처 철물점 갔더니 안판다고 하던데 어디서 구입하셨나요?

[@dekayscrafts]

@@장유빈-p6x 저도 철물점에서 샀어요 작은 철물점말고 좀 큰데로 가셔야 사이즈별로 있어요 가기전에 전화 해보고 가세요~

[@장유빈-p6x]

@@dekayscrafts 네~ 감사합니다!!

[@ducatiste123]

Bravo pour ton travail, peut tu nous donner les dimensions ? Merci 👍

[@dekayscrafts]

Unfortunately this is no drawing. I'm sorry I didn't help you. =)

[@한소영-c9p]

👍👍👍👍👍👍

[@dekayscrafts]

👍👍👍👍👍👍

[@alrawi70]

Thank you for all videos But Please can you put table sizes in pdf files or sketchup file

[@dekayscrafts]

There's no drawing because I made it improvised. I'm sorry I couldn't help you

[@ozanli_Gen6]

Thanks Master! ⭐⭐⭐👍Like & Subscription from AZE 🇦🇿🤘

[@junjo6494]

저도 똑같은 직쏘 구입했습니다..^.^ 직쏘날 추천 부탁드려도 될까요?

[@dekayscrafts]

짧은 순정날과 긴 보쉬 목재용날 사용하고있어요 ~

[@junjo6494]

@@dekayscrafts 곡선 가공을 하는데 잘 안되서요..곡선 가공 시 특별한 기술이 있나요? 쉽게 하시는거 같아서요..^.^

[@자덕아저씨]

작업공간이 어디신지 꼭 한번 방문하고 싶네요~~아님 전화번호라도 알 수 있나요? 불편하지 않게 해드리는 한도에서..

[@dekayscrafts]

작업 공간은 조용한 주택가라서 제약이 많은 곳이예요~ 설명 상단에 메일로 연락 주시면 제가 연락 드리겠습니다 ^^

[@자덕아저씨]

@@dekayscrafts 알겠습니다^^ 50대 후반에 이제 목공에 관심이 많아 김팀장님 영상 열심히 구독하고 있는데.. 문의사항이 많아서..

[@이승희-d4r1p]

전동공구 다룰때 끈있는 옷 엄청 위험해요

[@dekayscrafts]

조언 고맙습니다~ 마침 지적해주신 분이 있어서 며칠 후에 후드끈 싹 뽑아버렸어요~

[@rainerzufall689]

Nice, but you have a serious dust collection problem and I really hope you don't expect that "mask" to protect you from anything.

[@dekayscrafts]

Thank you for your concern.

[@rainerzufall689]

@@dekayscrafts When I built my workshop a few years ago dust collection was a major concern to me and it took me three iterations to built my dust collector MK III that is in service for two years now. It has an internal diameter of 120mm although I only use 100mm pipes. Air goes through a cyclone and leaves 99% of the dust in a 0,3 m³ box. Then it goes through the 2,2 kW radial fan and then through a 1 micron folded filter that can actually hold about 10-20 liters of superfine dust and still work. It has to be cleaned after emptying the big box several times. Most of my machines are homebuilt or modified to allow for really good dust collection and I have to say: If you build the dust collection properly, on many machines you can really catch 99,9% of it. Pretty amazing. One the table saw drives me mad but I will probabaly replace it in the near future with a table/arm saw. So it will basically be a track saw on steroids which is a lot better in dust collection is you ask me. In general if there is any dust I use a P3 filter mask. Oh yeah and I have an air filter that circulates the air, too ^^ But it is not only about the lungs and cancer. It is also about overall cleanness of the workshop. I don't like dust everywhere.

[@alecd2008]

9:15 Eu vi!!🤭🤭🤭🤭

[@dekayscrafts]

🤭🤭🤭🤭

[@HugoDe]

bebida

[@dekayscrafts]

Thank you =)

[@morslimaarouf4371]

👍👍❤❤❤🇩🇿🇩🇿🇩🇿🇩🇿🇩🇿

[@dekayscrafts]

Thank you =)

[@thelce49]

You are very creative and capricious. Congratulations!

[@dekayscrafts]

Thank you =)