Mini z transmitters, compatibility and what you need to know/ KT18,KT19, EX6R, KT432PT,KT531, NB4

  Рет қаралды 19,069

Garage RC and hobbies

Garage RC and hobbies

Күн бұрын

Пікірлер: 138
@jaaz77
@jaaz77 4 жыл бұрын
This is the absolute best explanation I've seen yet! How do the Futaba transmitters compare to the EX-6 and other high end transmitters for the Evo's. I can't wait for the comparison vid.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I'm going to get the Futaba next. It's a good radio, but I've just not needed it. Yes coming soon.
@andrewyork8513
@andrewyork8513 8 ай бұрын
Got to appreciate the NB4 update. Super helpful video! Kind upf frustrating, 1 doesn’t do all, but it is what it is!
@mikeb835
@mikeb835 4 жыл бұрын
Great video right here. I did hours of research trying to figure out what you said in 13 minutes. Its all a little confusing with all the different models out there.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Thanks mate. I bought a few cars then realised not compatible with tx I had.
@sammybaka
@sammybaka 4 жыл бұрын
Love your mini-z passion and helping the community understand all the nuances that aren't always clear with people. I don't live close to the UK but I hope the website launch is going to be smooth and productive! On the topic of transmitters, I don't have a ton of experience like you as I only use the kt-531p and radiolink rc4gs. Recently, I looked into this, but unsuccessfully, whether kt-531p can bind with anything other than ffhs mini-z since I'd really like its compact size for travel.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I will research for you, Ps I love the radiolink. 👍
@sammybaka
@sammybaka 4 жыл бұрын
@@GarageMiniRCUK Nice and thank you! I think I've watched almost all your videos. GLA with a drift objective sounds awesome. 👍
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Yes its always when you discover something new about a car you have that the fun starts.... A simple adjustment and you have a different car... So much fun.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I think there is a kyosho reciever (fhss) that will work in other rc cars(not mini z) that might work with it. I'm looking into it.
@sammybaka
@sammybaka 4 жыл бұрын
@@GarageMiniRCUK Thanks!
@miniracersus
@miniracersus 4 жыл бұрын
Finally someone made a complete video 👌🏾
@4acae86
@4acae86 2 жыл бұрын
I’m pretty sure you can also use a lot of the KO Propo transmitters. I use a EX-2 to control my MHS cars and it can switch between Mini Z and regular RC receivers. This is a great video since it’s a little hard to find this info. Thanks!
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Yes you are correct... Might have to make a part 2 🤔👍
@BMR3
@BMR3 3 жыл бұрын
When your transmitter game is on point 💪
@rajeevpariyarath
@rajeevpariyarath 4 жыл бұрын
Very helpful.Thank You
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Thanks for the view my friend.
@TriAdX
@TriAdX 2 жыл бұрын
The fly sky noble nb4 has a module you can plug into the tx that will let you use it for all fhss mini z.
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Yes. Came out last year. Thanks. I'm tryign to get one.
@stk247
@stk247 4 жыл бұрын
Hey there, You didn't touch on Futaba and Kyosho use/compatibility.. is that because you don't have those or because they aren't as good as those shown? Side question; my local shop has a mr03 Evo sp.. I'm considering it as my first mini. Will I be able to race and drift it (home use)?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I don't have the Futaba but it is, good. The evo sp can't drift. It does race well.
@machoman5356
@machoman5356 Жыл бұрын
Can I use Futaba 4pm with with RM005 module to run stock mRo3 with syncro? Or is that Kt-432pt only?
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
I think mr03 runs with synchro as stock . The futaba is for the evos . I’ve not tested futaba yet
@lawrencewinter
@lawrencewinter 3 жыл бұрын
Hi garageRC. I have a MA-020, and love it. I am using it to race with friends on a private carpet track. I have the kt531 controller. I am finding the right turning is weak (due to the battery mass on the left I presume...). My question is, are you suffering this issue? And is this issue mitigated at all with the synchro-touch controller? Considering building a MA-3 but since I have a nice sanwa for 1/10 racing I'm tempted to go BZ3 and ditch mini-z due to their awful compatibility with sanwa.
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Synchro controller does help as it gives adjustalbe end points and more steering control. If you want to get serious then don't waste time with synchro save the money for a race set chassis like gla or bz3 and go sanwa or nb4.
@vapeurdepisse
@vapeurdepisse 3 жыл бұрын
Looking to buy the Jeep crawler but I'm sorry to see that the throttle isn't as gradual as I would like (seeing various comparos). Looks like I'm looking for a transmitter upgrade to KT432PT to get a custom curve? Would that work to get a very gradual response for low-speed fun?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I'll test it out
@vapeurdepisse
@vapeurdepisse 3 жыл бұрын
@@GarageMiniRCUK looking forward to that!
@lesarsenal6591
@lesarsenal6591 2 жыл бұрын
Hi, I’m wondering who made the dual side damper for the chassis of the Enzo.
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
I wish I knew . It’s an old car I got off eBay 3 years ago . I’m guessing it’s an old atomic design
@BMR3
@BMR3 4 жыл бұрын
Congratulations on hitting 1k subs brother!
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Same to you dude 😂👍😎
@BMR3
@BMR3 4 жыл бұрын
Garage RC it’s funny but I noticed are channels have grown hand in hand. It’s actually really cool 😸
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Yes with some strange mystical power..... Has the makings of a TV show 🤔😁
@6JWB9
@6JWB9 3 жыл бұрын
Great video👍🏻 I just subscribed your channel. 😄 I believe Drift44 uses some weights on his Mini Z for precision drift driving. I was wondering if you able to find out D44's Mini Z drifting set up?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
He's super nice guy. It's an advanced set up. Counter steer set up with anti roll bars. He did tell me. Commented on the Cs drift video I did.
@6JWB9
@6JWB9 3 жыл бұрын
@@GarageMiniRCUK Great! I'll watch yours then. Thank!
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Message him on face book aswell 👍🏽
@thenextaeon
@thenextaeon 2 жыл бұрын
Hi am new to mini z(and basically the world of RC cars)here. I’m wondering if it’s possible to use other txrx like Futaba or such as the receiver units don’t look like they fit onto any kyosho models. The Kyoshos all look like they use a proprietary chip instead of those receivers bundled with transmitters
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
I am about to do a video about this . The evo models now other options via 3rd party company . So you can use sanwa , flysky cheaper models other than nb4 .
@Marximarks
@Marximarks Жыл бұрын
@@GarageMiniRCUKI will be looking out for this video. I am also new to mini Z (but been doing 1/8 and 1/10 electric and nitro cars) and I am curious if there is a receiver option to use my Sanwa MT12 transmitter. I was looking to get NB4 but if I can use my MT12, it’ll save me money. Thanks for sharing your knowledge.
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
Look up mxo racing . They have evo range sanwa rx .
@doingyamom
@doingyamom Жыл бұрын
I may be a bit late here but does anyone know of any alternative (preferably cheaper) controllers that can be used in place of a KT-18? I lost my controller a long time ago and I want to get my mini Z running again but I don’t want to break the bank. Anyone have any suggestions?
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
I think the only cheap option is a used kt18 . Where are you located ?
@TheEtienne55
@TheEtienne55 3 жыл бұрын
Exactly what I was looking for! I still have doubts tho. I am waiting for an ma020 (celica wrc) which comes with the KT531, and also have the mr030ve coming. The mr030ve only takes the kt18/ex6r. My question is, can I change the receiver chip on the mr03ve to use the kt432 on both?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
If it's the older ve then no. If it's the newer Mr03 evo then yes
@TheEtienne55
@TheEtienne55 3 жыл бұрын
I managed to get the jkb86 50th anniversary edition, with brushless and bearings out of the box. It states that it’s only compatible with ASF tx. When I was checking part nos, apparently I would he able to pair it with a Ko Propo ex-rr.. not sure though..
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
You might if it has mhs? Otherwise ex6 exr or kt18
@kalinkha
@kalinkha 4 жыл бұрын
Very informative, bit messy😃
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
You should see how messy the gla video got once I sorted the servo issue camera in one hand waving all over the place 😂👍🏽
@ahmedghamdi1668
@ahmedghamdi1668 Жыл бұрын
Can I control mini z MA-020 with flysky nb4 ? The flysky receivers I found is only for evo chassis
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
You can if the nb4 has the mini z fhhs module or software
@Quintanater
@Quintanater 3 жыл бұрын
I’m alittle confused. Purchased a mr-03w and a nb4 and I can’t get it to bind. Do I need a different receiver?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
hi , only the mr03 evo and ma030 evo can bind with nb4 as it has interchangeable receiver chips .the standard mr03 and ma020 cannot bind to nb4 .sorry to hear this . hope this helps .
@kevinmonroe4887
@kevinmonroe4887 2 жыл бұрын
Late but hope this helps if you haven't solved this issue and I'm sure you have but.. Flysky fs rm005 module allows you to use your nb4 on all of your mr03 and ma02 models
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Yes this works it’s came out a few months after I made this video . I haven’t done video on it yet .
@kevinmonroe4887
@kevinmonroe4887 2 жыл бұрын
Awesome content.. Definitely subscribing! As for the nb4, those modules are readily available at A Main hobbies online. I got mine under 30 bucks. I just got into mini z (and rc in general) and already hooked..2 cars but both are the rtr versions and tired of lugging around 2 radios. Problem solved! I do hope that you make a vid on this as I had to find that module myself. The tech at my local hobby shop had no idea they existed. Perfect for someone like me that's new to the hobby because it's plug and play.
@krissfly
@krissfly 2 жыл бұрын
New to mini z. I recently picked up a MS 1 and. Is has no brake it goes straight to reverse. Is there some way to reset or a way to program the break? Thanks
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Mr01?? Original miniz had no brake.
@krissfly
@krissfly 2 жыл бұрын
@@GarageMiniRCUK I don’t know what model this is. The servo says MS 1 And the speed control cover says ra 1 .. it came with a Volkswagen bug body and it has an antenna so it’s an old one. I picked up a couple of the new ones and the track me and the Grand kids are going to have some fun.
@xJesseJames33x
@xJesseJames33x 3 жыл бұрын
Brotha I have a awd ve pro 020 paired with a ex -6rR . How do I turn the throttle punch down or the throttle in general ? Thanks remote is confusing
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I'll grab mine amd explain.
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Goto throttle then travel, then highlight where it shows F and change from 100 down to say 50. You can also go up to 150! For punch goto dynamics and change punch
@raydec9777
@raydec9777 4 жыл бұрын
Hello. I have a question. I have a Toyota Corolla 020 mini-z. And I want to buy a kyosho syncro kt 33. Do you recomend itt?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Hi You mean the sychro touch KT-432PT?
@raydec9777
@raydec9777 4 жыл бұрын
Garage RC. No. I mean the kt-331p. For the 020- awd Toyota Corolla
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I don't think it's compatible with mini z. It's for the larger 1/10 scale rc. I've got a synchro kt 200 use with tamiya tt02 and that's good.
@raydec9777
@raydec9777 4 жыл бұрын
Ok Thnks for the info 👍🏾🙏🏽😇
@saqibshafiq1615
@saqibshafiq1615 4 жыл бұрын
So overall which is the best one just for the evos, and what’s the difference between the nb4 and kyosho touch screen for this car, which one performs the best
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
For me for just the evos I love the nb4. Interface is better than kyosho touch screen. It has the lipo battery built that lasts.
@thomastometich6767
@thomastometich6767 3 жыл бұрын
Can the Sanwa M17 be used with the MA 030 EVO if you get a compatible micro receiver and wire it in?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Not as far as I know. 😔
@mikecabardo
@mikecabardo 3 жыл бұрын
Can I bind any non-Kyosho FHSS 2.4ghz transmitter to a Kyosho Mini-Z Buggy MB-010VE 2.0 INFERNO MP9 TKI Chassis?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I'll have a look. Not been asked that before.
@mikecabardo
@mikecabardo 3 жыл бұрын
@@GarageMiniRCUK the KT531p is so hard to find these days and I’m looking for an inexpensive transmitter for my MB-010VE 2.0 chassis.
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I have 2 spare not boxed. Where are you located?
@mikecabardo
@mikecabardo 3 жыл бұрын
@@GarageMiniRCUK SoCal :)
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Send me an email to Admin@garagerc.co.uk let me see what I can do. I'm a bit busy with non rc work today.
@MrTonstars
@MrTonstars 4 жыл бұрын
Kyosho KT 432, Can I adjust gyro setting on the remote when use with MA020 chassis?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Yes for Ma020. It works on older Ma020 sport aswell.
@xavierkoh3034
@xavierkoh3034 3 жыл бұрын
which is the best transmitter for ma030 evo? I already have noble nb4
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
For pure performance and not the operating system? Probably ex6r. Its kyosho made so more features for ma030. The synchro touch is simelar to nb4. Hope that helps.
@hreuter86
@hreuter86 4 жыл бұрын
Hi, is it possible in anyway to use the ex-6r with the mini mp9 buggy or only the kt-432pt as an upgrade.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I will check is the mp9 asf?
@hreuter86
@hreuter86 4 жыл бұрын
@@GarageMiniRCUK Thank you, I just looked it up it says fhss so I’m guessing not.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
@@hreuter86 should be able to use the kt432 synchro touch
@ayeyooo7008
@ayeyooo7008 3 жыл бұрын
Can I use a kt 531p with an awd ma-030 evo?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Yes if have correct chip.
@xJesseJames33x
@xJesseJames33x 3 жыл бұрын
hey brotha how do you make the asf 2.4 ma020 evo change to communication mode so it will except the ics lead ? i talked to kopropo they said i have to put the car in comunication mode to use the ics lead any ideas on how to do this ? they said its in the manual of the chassis page 8 and 9 but i cant find it lol an help would be great !!
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I'll be back home tomorrow. I'm sure I have this Manuel. Bro I will do a video on this topic for you.
@xJesseJames33x
@xJesseJames33x 3 жыл бұрын
I appreciate it
@matthewpoon5402
@matthewpoon5402 3 жыл бұрын
So I’m basically not getting the full experience if I’m using the kt531p with my ma-030evo 😞☹️
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
It's still a very good car. 👍🏽
@matthewpoon5402
@matthewpoon5402 3 жыл бұрын
@@GarageMiniRCUK bought a new transmitter just for the Ma-030 because the kt531p does not fully work with my evo thanks for the info again, but what a dent in my money mini z’s
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
It's an addiction. I now have nearly 30 cars. Ouch.... . Its an addiction... 😂 But what can we do they look so good....
@matthewpoon5402
@matthewpoon5402 3 жыл бұрын
@@GarageMiniRCUK that’s wild 😛 good stuff.....I’m not at the point where I’m good enough to drift the RWD more hi tech ones yet. Keep up the vids though I don’t think I would have a clue what to do if it weren’t for these vids
@rsj487
@rsj487 3 жыл бұрын
Can multiple cars be paired to a single KT-531P transmitter?
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I don't think so. I think each time have to repair with new car.
@miniracersus
@miniracersus 4 жыл бұрын
Are you shooting on top of some type of “green screen” excellent video btw
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Yes I am, its a new trick I've learnt, only issue I had was my camera stand moving. But I have that fixed now. Thanks 👍
@HofmeisterF
@HofmeisterF 2 жыл бұрын
Hi, can I use kt432pt with m03 rwd?
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Yes should work depends on how old mr03 is may have to switch modes from fhs to fhss
@TiagoAzeredo
@TiagoAzeredo Жыл бұрын
Can i use the absima cr4t on mini z mr03?
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
Not sure not tested it . What freq is it ?
@jaimebosworth4227
@jaimebosworth4227 2 жыл бұрын
Thank u ! Drive me nuts , so ex6r wont do fhs cars
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
Yep . It’s asf or mhs
@jaimebosworth4227
@jaimebosworth4227 2 жыл бұрын
I have a nexx racing skyline chassis car with a round yeah racing motor , so far soo good , butt when i hid rails on rcp track , the car bounces back too far Other than not enuff drag brake what can i do , it makes a simple crash into the cost of 3 crashes Thanks in advance for any reply !
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
I found using lower gearing helps with braking . Try Turing up reverse exp on radio too
@JCReyesJCRACING
@JCReyesJCRACING 4 жыл бұрын
Sir, I have Sanwa 11mX 2.4. How can I use this on my mini-z? Thanks in advance!
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I will find out for you. Many thanks
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
I will see if there is a way. 👍
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
It's not that easy. Unless you strip out the electronics. I've doen a video about it. kzbin.info/www/bejne/nZmccmWBi8trpsU
@NeoIsrafil
@NeoIsrafil 3 жыл бұрын
For some godawful reason the syncro touch is 400 bucks now T.T no programming the car from the controller for me. :(
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Really, that's high. Where are you?
@pekwalker
@pekwalker 4 жыл бұрын
What is the difference between the MR-03EVO and the MR-03EVO SP?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Evo is awd... Sp is rwd race car only not drift
@pekwalker
@pekwalker 4 жыл бұрын
@@GarageMiniRCUK Thanks. For a Drift car, wouldn't Rear Wheel Drive be ideal? Also, which Kv would be best. I was thinking about a 5600kv version.
@BICIeCOMPUTERconGabriele
@BICIeCOMPUTERconGabriele 2 жыл бұрын
@@pekwalker For a drift car you need AWD otherwise it will be almost undrivable
@scottmeyer636
@scottmeyer636 2 жыл бұрын
is it possible to stll get the kyosho syncro touch?
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
I don’t think they stock it anymore . It’s not on the kyosho supplier website in the uk .
@scottmeyer636
@scottmeyer636 2 жыл бұрын
I guess I'll have to get the FS-Noble nb4 with the module. I hope to get one at my local shop. maybe an EVO chassis too.👍
@GarageMiniRCUK
@GarageMiniRCUK 2 жыл бұрын
If you get stuck I have those in stock .
@szarvadyjazon
@szarvadyjazon 4 жыл бұрын
Is that a black dial ceramic daytona?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
👍🏽
@jayce704
@jayce704 3 жыл бұрын
Is that a genuine Rolex watch?
@rcmindset2876
@rcmindset2876 4 жыл бұрын
Could you not just buy the EVO receiver and put it in any car?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
If only my man. Life would be sweet. They designed the evo as the first mini z with interchangeable reciever chips. All other mini z esc and receiver are one. Cannot seperate. 😭
@rcmindset2876
@rcmindset2876 4 жыл бұрын
I race 1/10th and have been the hobby for years so I know nothing about the minis but wanting to buy one. That’s why I’m asking if you could just buy whatever receiver is in the evo that works with all three transmitters and put those in all your cars?
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
Oh I get it my bad. So I use the same receiver for those in my non mini z cars yes. So fro the nb4 I have the evo chip and I have micro receivers in my gla that are compatible and I have larger normal receiver in my tamiya tt02. So yes I do use it in other cars, but my other mini z that are non evo are a pain.
@GarageMiniRCUK
@GarageMiniRCUK 4 жыл бұрын
It's one of the drawbacks of mini z you are limited by what they allow.The gla you can use any radio with a small enough receiver.
@masterchief586
@masterchief586 3 жыл бұрын
I will just change out the radio gear.
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
I've done 2 videos on this. Good luck. 👍🏽
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
kzbin.info/www/bejne/op_Kl4qVjtuDe7c
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
kzbin.info/www/bejne/nZmccmWBi8trpsU
@GarageMiniRCUK
@GarageMiniRCUK 3 жыл бұрын
Ok I may have got mixed up these videos are for changing radio in mini z sorry.
@MrBrownStayne
@MrBrownStayne 10 ай бұрын
Hh
@ZbigniewMaurer
@ZbigniewMaurer Жыл бұрын
Extremely confusing
@GarageMiniRCUK
@GarageMiniRCUK Жыл бұрын
It gets worse . Kyosho released a usb add on for nb4 . So you can know use with ma020 and mr03 that don’t have the plug in chip . Also 3rd party mxo make a sanwa chip for the evo versions . 🤣 it’s madness .
Kyosho Mini Z - First Upgrades and Tips
16:40
Formula Z
Рет қаралды 20 М.
KYOSHO MINI-Z MR-03 EVO: We had some Questions
8:50
ProNoobRC
Рет қаралды 8 М.
How I Turned a Lolipop Into A New One 🤯🍭
00:19
Wian
Рет қаралды 13 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 269 #shorts
00:26
Must Do Kyosho Mini Z Mod That Cost Nothing
9:36
Mark Santa Maria
Рет қаралды 77 М.
Watch This Before You Buy Mini-Z “Upgrade" Parts
16:16
Are cheap radios slower?? $100 vs $600
23:39
Ryan Harris
Рет қаралды 100 М.
KYOSHO SyncRo Touch KT-432PT: UNBOXING and REVIEW
13:45
ProNoobRC
Рет қаралды 2,8 М.
Best Mini-Z for at home fun!  Part 1
12:38
scm6079
Рет қаралды 28 М.
Волга на атомной энергии
0:56
ТАЙНЫ ПЕНТАГОНА
Рет қаралды 2,7 МЛН
Insane drift crash
0:59
PeopleVsCops
Рет қаралды 10 МЛН
А сколько катаешься ты? Гравийный велосипед
0:57
Тот самый Денчик
Рет қаралды 2,7 МЛН
Скрытая реклама Skoda в автомобилях BMW и Mercedes🤔😱
0:59
Рекламные истории
Рет қаралды 3,3 МЛН