I have used T88 for the first time and I now know why you apply with a stick, it is thicker that any other resin I have used. Good to see you make progress and it looks as if it is going fast. Are there any diaganols in the fuselage. Love those massive bolts used as weights.
@DTMinimax3 жыл бұрын
There are diagonals. It’s sheeted plywood up to station 3 and then diagonals from there to the rear. I ran out of the 5/16 x 5/8 I had already cut so I have to cut some more to continue the diagonals.
@flyingkub3 жыл бұрын
@@DTMinimax Ah I see, as long as it triangulated some how before you take it off the table you should be okay.
@DTMinimax3 жыл бұрын
And It’ll go back against the fence before putting the plywood on. You must have received your Fisher tail?
@flyingkub3 жыл бұрын
@@DTMinimax Yes so first video out Saturday.
@StephenSmith-fz8fb8 ай бұрын
Is scarfing done because of where the longeron bends.
@DTMinimax8 ай бұрын
The bottom one is two different sizes of material. The top one has to do with the length. Not easy to find material that long. I cut all my wood from 2x6x12’ lumber
@ulbuilder3 жыл бұрын
If I were to build my fuselage again I would make it a flat nose firewall, not build the bed mount into it. Then I can fabricate a motor mount for whatever motor I use. I could shift the motor fore and aft to adjust the CG too. See Brian's build for example: www.lonesomebuzzards.com/cgi-bin/forum/Blah.pl/Blah.pl?m-1384361203/s-750/
@DTMinimax3 жыл бұрын
Thanks for the link! I’ll check it out
@cohocarl3 жыл бұрын
Don't know if it's on my end or the link, but I'm getting an error with the link to LB.