MiniPRO TL866CS USB Universal Flash EEPROM Programmer

[@northwestrepair]

I have this programmer. I love it. I have a question. How to read/write EEPROM from a chip that DOES NOT have an adapter ? What pins do i need to connect to this programmer and in which order ?

[@jeffsylvester7394]

Hi.Jimmy. Can dis tool be used other Eprom chips and other ics that need resets with the software that comes in your kit.Thanks

[@AsanMasraf]

this tool can be used for EPROM (XICOR, X28HC64P-12, CB9849) to read, erase and write?

[@isasuleimanisa5508]

Hello Sir, how can i flash my canon pixma g1000 eeprom chip IC is was blocked, what equipment should i use and files?

[@aaronmurphy5060]

Cool, thanks for sharing. I'm just starting to get into this kind of thing for small DIY projects like LED blink and fade controll. Gotta start some where. You use these to fix televisions 'eh? Would that be mainly new LCD and the like versions, or were there a use for them on CRT type models? Are they flashed to allow a few types of main boards controll a lot of screen types -> save on production cost? Or what is the function of the chip in your line of work? Always fun to pick up some new insight from or admiration for, a tradesman doing his job. Whole lot you would never guess burried in the details of a guys day to day. Anyhow thanks

[@somotrodo4659]

Hi I have eeprom microship 93AA46AI which I can not read it by TL866A programmer and also by TL866 plus. Is there a specific programmer for this kind?

[@prasannsachdev8227]

Can SPI EEPROM be worked through this kit.??

[@besiko]

may i ask u are this TL866ii plus need another adapter when flash 1.8v bios chip?

[@desmoaky]

Hi can i read flash spansion fl116kaf01 with this programmer?

[@MDsayed-xz7df]

Hello sir, Kindy help please. What's this BL24C16? If any EEPROM be damaged what should we do? How to recover the circuit? Thank you sir.

[@joeytroutman9506]

Love the MiniPRO TL866CS!

[@machfiver753]

I am trying to program a bios chip on an acer laptop. So far I have been unable to get the programmer to connect I have tried using the ribbon cable and clothespin clip but it isn't working at all. It isn't easy for me to look at the legs of the chip and at the same time also see if the clip is positioned correctly. How do a locate teh clip onto the bios accurately assuming that it is my error and not the hardware that is at fault. I want to be able to rule out user error as the cause before I send it back. I don't have a lot of confidence in buying products of this type from china but I don't know of an alternative. Plus the materials that the programmer are made of are flimsy at best the quality is pretty low and that alone has me wondering if it isn't a dud. I can't count how many times I have bought electronics from china that were delivered in a non working state but looked fine and showed no physical damage.

[@ricvinicius1]

i am new to the field and use the same programmer. I'm trying to load 93c66 and it's saying: ERROR! CODE Address: 0x000000 Buf_Val:0x71 IC_Val:0x06 have you been through this? do you know how to solve?

[@MisterXS75]

hi, can it ignore cp bits and read copy protected pics? i've got a PIC12F615 with CP flag set and need to burn its content in a new blank pic, tried with PicKit3 and MPLABX but i get all 0 when i try to read the microcontroller

[@khatran9202]

Do you have a kit that can read and write the DS2807 chip?

[@joaquinminguez4125]

Hola,, tengo un chip de BIOS ASUS M2V con esta información: W39VO4OCPZ ...y mi pregunta es si el minpro TL866II plus lee este chip, gracias de antemano por la información que me podáis facilitar...veo que el minipro tiene en su base de datos el W39VO4OC... sería lo mismo?

[@miju1407]

te agradezco por tus vídeos...necesito ayuda para clonar un microchip AT49F002ANT lo puedo hacer con este programador...gracias

[@Mr__V]

Would it be at all possible to program chips still on the board?

[@DriftHyena]

Is there a compatibility list somewhere?

[@harlynayacil9552]

this model prog can copy the good EPROM? I need reply thanks.

[@NerdThingsAndMore]

Thanks for the info and video

[@israelpereirarj]

Is it compatible with Winbond 25Q32BVSIG? (Laptop model is ASUS K43E, mainboard K43SD REV. 2.2)

[@ajinkailasam7551]

Hi sir i have 2016 model mahindra thar m2dicr it's odometer is eeprom less model how to change its mileage

[@5905-k8v]

Can this universal programmer work to reset the bga chip

[@alexandrehackenhaar1516]

sabe se consigo gravar o stm8s003f3p6 com essa gravadora?

[@farhath7669]

hello ,i have winbond 25q64FVSIG 1218 how to get the bin file ,please any help???

[@josepsg612]

When I want to program I get an error index 0001 buffet value 0x02 ic value 0x3e, could you help me solve it?

[@ozugbosamson4211]

How do I get this device

[@siamhasandi8840]

THANK A LOT OF, VERY USEFULL INFO 🙏

[@iiiii1iiiii1]

Hi, this programmer use for Support 24 25 93 EEPROM 25 Flash BIOS Chip. Do this programmer can use in automotive electronics ? automotive module has 24 25 93 EEPROM. Thanks

[@fatehfernane1666]

have you tried it on car ecu?

[@mrem4386]

Can anyone tell me the difference between the TL866CS / TL866II / TL866A ?

[@Usernameisvalid8968]

I will want to write to a 42 pin chip a 27c322, ive seen an adapter put on a mini pro to do this i just cant find the link anymore!

[@spaceage2000]

Can you please share the link of MiniPRO TL866CS software

[@keving10254]

What happened to the huge chunk between plug in USB cable and open the programming software?

[@netautorisationnetautorisa545]

*??? THE THING ON THE "USB CABLE" =FERITE "NOISE KILLER" ...*

[@keving10254]

@@netautorisationnetautorisa545 No, the huge chunk of info! Just says plug in USB and as if by magic it all works. No mention of installing software or drivers, I've tried two of these programmers and several drivers, never got one to work properly. As for WIN10, forget it!

[@TheKhulak]

When I change the SN in the BIN file, it works no more. Can you help me how change the SN?

[@ziadfawzi]

Thank you.

[@hindus_sthan]

Is this pic module is able to read hex file from Atmel AT89C52 ic ??

[@melkiorwiseman5234]

Yes. Both DIP and PLCC44 versions are supported by the software.

[@umargul5644]

Great job sir

[@bram9498]

can I program Motorola S-record files with this device? And how do I combine two S-record files into one so I can program 1 file?

[@onehundredjacks3315]

where do you get the program for the chip tho ???

[@chiefbrabo9330]

Can it program super flash ie. 25Q21BT. (its a vga card bios). thx

[@rodrigocapelini2008]

Hi! nice video bro. I hav one question: I have a tl866cs like this and i'm trying to burn a 27C801 from ST, but i got a error checking the chip ID. If i skip this check i can read the chip content but when i try to program this chip i get the following error: ERROR! Address:0x000005 Buffer Data:0x00 Verify:0x08 Do you have any clue about it? Thank you!

[@manoj2madhav]

Hello Bro.. There are 2 things you need to check. 1. If your Chip is Good or burnout? 2. Check your programme, Is it complete? or making or burning the exact file on exact chip? Have a nice day...

[@melkiorwiseman5234]

I thought that the 27 series of chips were program-once chips? If it has a quartz window, you may need to expose it to ultraviolet light in order to erase it before trying to reprogram it. Remember that this will destroy the contents so read and save those contents if the data is important to you.

[@LeMoHaZe]

Hi there, can I write .BIN files with this chip burner and with the software provided to an SST 27SF512? Thanks ash

[@melkiorwiseman5234]

I have the A version of this and the answer is yes. You can program the DIP28 version directly or the PLCC32 version using an adaptor.

[@indraverboden6256]

tank for sow your video

[@naeembabakheil]

what does "EEPROM" do where it taken from PC .

[@suho1535]

Thanks for vidio

[@baileymoody3916]

You do understand that most of the people who clicked on this video, did so because they believed that it would teach them how to use eeprom and they would actually learn how to program instead of just clicking a button right?

[@eyeofthetiger8287]

OK good, which file did you open up to program the chip ? where did you get this file ? did you download it or did it come with the programmer ? that's what I like to know

[@manoj2madhav]

You need the Hex file or you create a Hex file (or Bin File ) to programme a chip.... You can also download the hex file for a certain programme..

[@texthemaddog1]

Manoj Soorya is this programming the chip internally?

[@mbarakaahmad5800]

Eye of the Tiger

[@mariogino305]

hi, for binary files, where are found it?? is included in minicd/dvd??

[@manoj2madhav]

No... Not in CD...

[@koga7349]

Is it possible to program an IC while it's in-circuit?

[@melkiorwiseman5234]

It will program microcontrollers in-circuit if you get the A version of this programmer instead of the CS version. It's a bit more expensive but has an ICSP (In Circuit Serial Programming) port added. This is intended for programming microcontrollers but it might work for serially accessed EEPROMs too. I don't know because I've never tried it.

[@waltinopedrozo9043]

Hello, thanks alot for this video, i wanna know if this programmer can be used to read and write nand flas memories, thanks alot for answer.

[@melkiorwiseman5234]

That's literally what it does. It reads from, writes to and tests most RAMs, (E)EPROMs and microcontroller chips, and it also tests many logic chips. I've only found a few older devices which it won't read or test (and that may be because they're listed under a different number).

[@technocaremicrosoldering5725]

Hi, Do you have bin file for this model: Asus VivoBook Max X541SC?

[@manoj2madhav]

No... Your can try those file from www.elektroda.pl/rtvforum/forum407.html Thanks..

[@skedar143]

Mujhe wingh scle ka ic pogram Karna hai.

[@juancarlos3989]

Es compatible 100 % para leer y grabar esta memoria flash 29F64GO8CBABA, TSOP48. Gracias

[@ragunathansuppiah4153]

thank you very much sir. very nice explain thanks 😚

[@nachanpong]

Can it read M5L8251AP-5? I had it on elevator board.

[@melkiorwiseman5234]

I can't find that listed in my copy of the control program, but it may have been updated since I purchased my programmer.

[@texthemaddog1]

Is this internally programming the chip

[@mayizolamayizolatoya4829]

texthemaddog1

[@rahultaye550]

Very nice sir

[@mahesurya9656]

sir this software worked at internet or not

[@afzalfaizi7571]

How to make output video on led tv

[@afzalfaizi7571]

Can you help me

[@DaBuGzLiFe]

Is there a way to edit the file in the program or is a new program needed?

[@melkiorwiseman5234]

The only way to edit the file inside the MiniPro software is by typing hexadecimal numbers over the top of whatever is already displayed. If you need to do more than trivial number substitutions, you'll need something else.

[@TheMartinv60]

Can it Program 27c256?

[@melkiorwiseman5234]

Yes. Either DIP28 or PLCC32.

[@sebbob6224]

can u also programme Dallas RTC ds17487-5 ?

[@melkiorwiseman5234]

I have one of these and the software version I have only lists Dallas chips starting with ds12. The software may be updated by now, but I've never needed to update it for any of the chips I've used.

[@scienceandtechnology5751]

How it can be use to program Toshiba ic

Biggest problem is to find the original program and when you can't find it, all these are useless

[@indian7924]

Hlw i am jabbar hussain Mujhe mini pro me pronlm aa rhii h krnt aarhaa h pr miter back nhii ho rhaa

[@igtlogan]

damage to my tv?

[@akhandagyaan]

Sir what is your location

[@jollygreenjeff2640]

Could i use this to program my GB homebrew a game to a cart

[@akmalkhawar6079]

why you select @sop8. And why don't you select @uson8 or @wson8. must replay thanks

[@chumatez]

THIS IS BECAUSE THE TYPE OF THE IC USED IS AN SOP8 CHIP TYPE

[@31jobert]

Were to find the number of correct devices..that you are typing?

[@melkiorwiseman5234]

Usually, the IC has the number printed on it.

[@AndyTorrealba]

Please. How to build my own "MiniPRO TL866CS USB Universal Flash EEPROM Programmer" homemade when you do not have money to buy a new one? Thank you. If someone knows how to do it, show the plans.

[@melkiorwiseman5234]

Building it yourself would be as expensive or more expensive than buying one, and then you'd need to be able to program it too since it uses a microcontroller to do most of the work.

[@shezz540]

I have a same programer but it's not reading eeprom 93c66 can anyone tell me what's I need to fix that problem

[@melkiorwiseman5234]

The most likely explanation is that the EEPROM is broken. If this is the case, the only solutions are too expensive and complicated to bother with.

[@saikiranrockzz1693]

How to all ready eeprom file copy to my PC please telme

[@jacoboperez1492]

Hello friend where I can buy that programmer I need to program laptop bios you can give me the specifications and where to buy it I hope your answer friend thank

[@manoj2madhav]

Check this for more information about this programmer... www.autoelectric.cn/EN/TL866_main.html

[@raphaelkabongobani8103]

Je besoin d acheter le programme re combien le prix

[@lokeshspicer]

hello, how to flash gospell set top box

[@RosalieBland-u1w]

Lucius Dale

[@tolutronics]

Does it support 8051 microcontroller

[@melkiorwiseman5234]

I have one of these programmers and that number isn't in the list of programmable devices, although it's possible that it's listed as a different number, or the software may have been updated recently.

[@HollywoodUndeadV]

Where to find bin files please

[@SMALLTECH]

Are you using .BIN FILE??????

[@harlynayacil9552]

this programmer is alowed copy to a good EPROM? I need answer thanks?

[@saikiranrockzz1693]

harly Rosano .hi how to copy a eeprom file in

[@saikiranrockzz1693]

Please tell me

[@melkiorwiseman5234]

It can do this, so long as you already have the EPROM with the source data, or a HEX or BIN file which someone has created with the data in it.

[@Mbahkoming]

to fill in the Ic AT29C040A can it be?

[@melkiorwiseman5234]

I have this programmer and that chip can be selected in the software, in DIP, PLCC32 and TSOP32 versions.

[@tolgaaktuner3380]

hı ı would lıke to ask guestıon ? can we program hex file by usıng thıs devıce

[@melkiorwiseman5234]

The programmer software will load both BIN and HEX files to program to a device.

[@matthewbartholow2687]

Pin Error? Any ideas what could be causing this?

[@BoobsAdmin]

uncheck "Pin detect" :D

[@indian7924]

Help me

[@rtype4930]

THANK YOU SIR !!!

[@TolandChristie-l7f]

Wintheiser Circles

[@anuchhetri2002]

hello

[@akmalkhawar6079]

When i open mini programmer it shows first file config error than open programme. any solution plz

[@apejoyekoyi2168]

Am in Nigeria how do I buy a pic programmer

[@SecurityCyber]

Chip to chip copy very convenience

[@Labtronicchile]

hellooo , anyone have any idea of how can i clone flash EEPROM am29f040b???

[@manoj2madhav]

TL866CS also support 29F040B.. Its ESPASION Chip...

[@FrancoPN]

This upa cable is helpful: kzbin.info/www/bejne/fYS0gnZ3aNGWhbc

[@TurnerBlake-q3x]

2648 Halvorson Brooks