Minor Tweaks, Major Difference! SS34 & Phase 4

[@jimmarkovitz2206]

Look into lucky stops. They offer a variety of stop positions that can change let off positions from 70-90%

[@stick__shooter]

I highly recommend Lucky Stops and a Tim Gillingham grip for Bowtechs. The Lucky Stops allow you to adjust your holding weight in small increments. I like the narrow 6 degree but he also has wide options and 3, 6, 9, and 12 degree angles.

[@PoeOutdoors]

You can cover the stops with different thicknesses of rubber fuel line for different letoff % and back wall feel. You can also invest in Lucky Stops, the BR model on the 4 dot setting puts my Revolt XL at 77% which is perfect.

[@lamont5050]

I just brought a ss34 from Lancaster Archery 2 weeks ago. My first bow in over 10 years and what a difference.

[@tommurph4496]

Could you do a comparison between the phase4 33 and the SS34, strictly in performance mode?

[@jackbuendgen389]

I have a SS34 and had terrible cable wear. I had serving separation in 5 different places. My bow tech owns one and put a new set of strings and it's been fine. So I think it's just bad strings

[@landonzimmerman5431]

Same here. I got 500 shots in and my cable serving separation was so bad the bare string was sitting on the cam. Hopefully new strings do better.

[@InsideOutPrecision]

@@landonzimmerman5431 yeah the stock strings on BowTechs are absolutely garbage. I put on new strings before I ever even set it up haha

[@landonzimmerman5431]

@@InsideOutPrecision will bow manufacturers ever put a little more effort into stock strings? I swear they’re getting worse. Id rather get $50 off and get the bow with no string.

[@jackbuendgen389]

@@landonzimmerman5431 strings are like insoles for shoes

[@InsideOutPrecision]

@@landonzimmerman5431 I doubt it. Mathews aren’t terrible, but Bow Techs are the worst

[@simonaudet1107]

Will definitely try your shrink tube trick… I bought a Carbon One and run in the same issue!

[@miket8018]

The shrink wrap cable stop idea is awesome. I have a CP30 and juggle the same thing, would like some more holding weight and don't want to shoot performance mod. can't wait!

[@SheepdogConservation]

That bow seems sweet, I just watched Tim that used to be on ElkShape get one that he was going to consider hunting with! I really want a new bow, but you just got me set back up with the warrantied sight on my bowtech reign and its about feeling like a new bow now that my rest is properly set up too! 🤣 I may have to message you with some questions to save another visit to the shop in a few weeks.. but regardless it is cool that you moved to G4 archery, your videos taught me a lot in the past! 👍

[@mm88swrt]

You ever find a spot up here?!

[@InsideOutPrecision]

Yeah bought a place in Forest Grove

[@michaelbushey2787]

The re routed the serving course so it doesn't have the realy bad angles going through the cam anymore. So the serving separation idoesnt happen like previous models.

[@jeffspencer7489]

Can you explain? Do you know when?

[@jameywaite7396]

Try the Lucky Stops. That's what I have on my Bowtech. I think there is for different adjustments.

[@jameywaite7396]

sorry, "Four"

[@slybig1369]

How would you compare this bow to Traverse?

[@jboyce23]

Can you do a video for the shrink tube on the Mathews mod please

[@InsideOutPrecision]

Just cut little strips and glue them over each other on the stops

[@jeffspencer7489]

Why would you shift your cams to extreme positions?

[@InsideOutPrecision]

To tune the bow. They’re designed to move right/left on the axle change the horizontal test through paper

[@wadefarley1996]

So I have a Mathews V3X 33 that I bought last fall. I am a 29 inch draw length and the bow currently has a 29 inch mod on it. However, at times, it feels too long. I know you said in the video that Mathews run a 1/2 inch long. Have you found this to be the case for all their modules? Have you tested this on a draw board? Thanks

[@InsideOutPrecision]

Yeah they always about a half longer than other brands in the same draw length

[@blake_jacksonph]

Can you review a PSE Shootdown Pro?

[@InsideOutPrecision]

Don’t have one to review. They’re hard to get!

[@joshb8472]

Lucky Stops all the way!!!

[@matthewkyle6939]

Man, you used to work on my bows in Springfield lmao, it is weird seeing you hold a bowtech…. Weird

[@InsideOutPrecision]

Haha still hunt with my marhews