Thanks for the great video Chris. Definitely going to buy one!
@ChrisRiley Жыл бұрын
Hope you enjoy it!
@75keg75 Жыл бұрын
Liked, commented and previously subbed!
@ChrisRiley Жыл бұрын
Thank you, Thank you!
@zimmy1958 Жыл бұрын
Thanks Chris. May have to get one for some fun.
@ChrisRiley Жыл бұрын
Thanks Zimmy!
@wangdennys10 ай бұрын
Excited to receive this camera and do the review
@ChrisRiley10 ай бұрын
👍🙂
@Ben-qh1ku11 ай бұрын
A lot good info Chris, thanks!
@ChrisRiley11 ай бұрын
Thanks for watching!
@JohnDStrand Жыл бұрын
Thanks for the content, Chris! Looks like a good system for new users that don't want to fiddle with Octoprint. 59 days to ERRF!
@ChrisRiley Жыл бұрын
Woo Hoo!
@D3ybeetSR3 ай бұрын
Compatible with new upgrade klipper Neptune 4 !!!! ❤
@ChrisRiley3 ай бұрын
Awesome!
@scottbaeder37 Жыл бұрын
Bring out the STUNT Benchy!!! Stunt Benchy for President
@ChrisRiley Жыл бұрын
I'd vote for him!
@The3DPrintingWarrant6 ай бұрын
Just got one and having a hard time uploading the Gcode. Are you having this issue?
@ChrisRiley6 ай бұрын
I haven't had that problem. Does it time out or is it complaining about something else?
@The3DPrintingWarrant5 ай бұрын
@@ChrisRileyit was me was using binary G code. Works after turning that off in prusia slicer
@derekmuranaga2 ай бұрын
Can you access the camera if you're not home? Or do you need to be on the same network to access the camera?
@ChrisRiley2 ай бұрын
If you are using the beagle cam app, then you can see it from anywhere on your phone.
@karlaname9902Ай бұрын
Can I run the camera without wifi? The wifi on the on my camera won't hold. Stays on for only a few seconds then drops out. Maybe the fix is buy different brand of camera?
@ChrisRileyАй бұрын
It would be pretty challenging. You can, but you will have to reconnect to it every time, it will write the time lapse to the SD card and you can remove it and down load it to your computer.
@Damien_Clarke9 ай бұрын
Does the app work on an android tablet? I'm not going to assume, made that mistake before.
@ChrisRiley9 ай бұрын
Good question, I will have to try it.
@creedofchaos81396 күн бұрын
i got issues if i upload gcodes i get the message [file type error!] do you know how to fix this issue i cant find it
@awilliams1701 Жыл бұрын
I just checked the site. MK4 is listed as a new printer on the latest firmware. That was fast. lol
@ChrisRiley Жыл бұрын
Lol, I guess they don't mess around.
@AndrewAHayes Жыл бұрын
Did they fix their security issues that the MKI had? With RPi 2W boards back on the shelves most savvy Marlin users will be setting up Octoprint with a USB IP camera ,why they did not just make an Octoprint/Octoklipper/Klipper compatible camera device is beyond me as they wouldn't have as much software development/update cost and much more usability, unless their goal is to mine your data!
@ChrisRiley Жыл бұрын
I will have to go back and review there changes. Hopefully, they aren't trying to gather anything, but it never hurts to be safe.
@MallocArray Жыл бұрын
Can it fully replace Octoprint? Can you send from Cura directly to the Beagle Cam?
@ChrisRiley Жыл бұрын
I don't think so, that's one thing I have asked for with Prusa Slicer as well.
@user-jh8yr4tv7g5 ай бұрын
Do you think it will work with my Neptune 4 max
@ChrisRiley5 ай бұрын
I don't know for sure, but I wouldn't trust it on anything that doesn't run Marlin. If it does, then it should work.
@Sam-ch4jh Жыл бұрын
What if there is a mobile App in achieving this Check layer lapse
@ChrisRiley Жыл бұрын
I'll take a look.
@woodwaker1 Жыл бұрын
Looks like a good system, but the printers I need a camera for are Klipper. I think they need to add that. It did seem to have a good picture and smooth time lapse. Could you use this as a simple monitor with no printer hookup?
@ChrisRiley Жыл бұрын
You're a Klipper man!🙂 It would be a useful addition. Yes, you can use the camera without a printer.
@woodwaker1 Жыл бұрын
@@ChrisRiley Thanks - That's what I thought. I really want a good camera that I can use to monitor the printers
@kameronselvey47239 ай бұрын
Does this work with bambu P1S?
@ChrisRiley9 ай бұрын
I'm not sure, I would guess it does not, it doesn't run Marlin firmware.
@sliverbaer Жыл бұрын
That interface looks a lot like OctoPrint.
@ChrisRiley Жыл бұрын
It's very similar.
@stevehernaman653410 ай бұрын
is this camera available to use on Mac, I can't find in App Store
@ChrisRiley10 ай бұрын
Not sure on mac, I know it works on my iphone. apps.apple.com/us/app/beagleprint/id1618227328
@Internationaldee__10 ай бұрын
Does this product scan?
@ChrisRiley10 ай бұрын
It does not, just a camera for monitoring.
@dennisk5500 Жыл бұрын
I've got the previous version. It must have a cheap wifi radio in it, cuz it keeps losing connection to my wifi. Hope the new one is better. It would be nice to have an ethernet port
@ChrisRiley Жыл бұрын
A port would be handy. Thanks for watching
@emanuelcalderon Жыл бұрын
The old one didn't work well. I had it.
@ChrisRiley Жыл бұрын
This one seems a little better.
@awilliams1701 Жыл бұрын
I had used prusa connect a couple times.....now it's offline. It looks like the printer isn't getting an IP address. I even reset it. No idea what happened, but it's so slow I almost feel like it did me a favor. lol
@ChrisRiley Жыл бұрын
I've noticed it going down, they've been making a bunch of updates.
@MaxGoddur Жыл бұрын
Sorry for the beginner question, can the sw replace Octo sw?
@ChrisRiley Жыл бұрын
This is a decent replacement for OctoPrint. OctoPrint has a lot more features.
@oscarreyes451110 ай бұрын
I was going to go buy one, but at 1080p... yikes
@ChrisRiley10 ай бұрын
🙂👍
@bruceyoung1343 Жыл бұрын
I hope it’s better than the original beagle. I’m going back and forth as to why two new iPhones can’t pair with the beagle
@ChrisRiley Жыл бұрын
🙂👍
@thomasembo286 ай бұрын
hey have issues wat kan kan ik doen staan filmkes fixen
@ChrisRiley6 ай бұрын
Hey, not sure I understand the question.
@Loneman_OG Жыл бұрын
Yeah, you lost me as soon as you said it requires an online account. No thanks.
@ChrisRiley Жыл бұрын
Fair enough
@pnt10357 ай бұрын
You'd rather have a device which you control from an app, but which doesn't require any authentication? OK.
@yasin_uyghur8 ай бұрын
It looks like a very poor quality, and video quality is very very bad, also very expensive, what a product is it ….
@ChrisRiley8 ай бұрын
Thank you for your insight!
@AZAGsSANDMAN8 ай бұрын
Well it’s overpriced, has the range of a dollar store WiFi item, and even when sitting directly next to the router it might not work
@ChrisRiley8 ай бұрын
Thanks for your insight!
@AZAGsSANDMAN8 ай бұрын
@@ChrisRiley it’s not a statement against you, wanted to make that clear. Love the video you did, but after my experience with these cameras I thought id share my experience. Should have written my previous comment a bit better.
@ChrisRiley8 ай бұрын
@@AZAGsSANDMAN No problem man, I didn't take it that way. I truly appreciate your thoughts! Thanks again for your comment.
@obie224 Жыл бұрын
maybe it's just me, but seems ridiculously overpriced for what it is. i mean the thing is not even small, it's BULKY.
@ChrisRiley Жыл бұрын
If you have to buy a RPI to do a time lapse it's pretty cheap.