Mirafit Wall or Rack Mounted Cable Pulley Machine Assembly Guide

[@Lynn-w3n6o]

Mines is coming today watch a 5 min video turn into 5 hrs 😅

[@HillbillyYEEHAA]

How was it? 😊😅

[@ourtwotube]

is there a max weight this can hold? couldn't see anything on the description at a glance

[@PaulBeauchamp-m1x]

How far from the wall are the 2" plate mounts. I'm concerned that my plates (which look larger than all of the ones I have seen on review videos and this video) will be touching the wall

[@MirafitOfficial]

The weight poles are approx 23cm from the wall. This distance should be perfect if you are using Olympic weight plates which are on average 45cm in diameter. I hope this helps 💪

[@kingstarks1987]

Does this station have to be mounted on a wall or can I go free mount less.

[@MirafitOfficial]

this must be mounted to a wall or M3 Power Rack

[@ImmortalBikeRider]

will you offer an Aluminium Cable Pulley Wheels upgrade rather than Plastic? if not what size are the pulleys? 88mm or 90mm?

[@MirafitOfficial]

the Pulley Wheels for this product are 90mm. At present our 90mm Pulley Wheels are nylon.

[@ImmortalBikeRider]

@@MirafitOfficial thank you 🙏🏽

[@Enisbet7]

Can this be attached to the m200 power rack?

[@MirafitOfficial]

No, this can be mounted to the M3 Power Rack or wall mounted. If you're looking for a cable pulley system for the M200, this is perfect: mirafit.co.uk/mirafit-m200-power-rack-cable-pulley-system.html

[@davida7284]

weird these videos never show recommendations for mounting to wall studs.

[@MirafitOfficial]

It is essential to check the surface you intend to mount this to is suitable & strong enough to support the load before installation. We highly recommend consulting with a builder or surveyor before installing this product.

[@StewartPattison]

Can you do chest flys with this

[@MirafitOfficial]

If you had two of these Cable Pulley Machines mounted opposite one another, you'd be able to perform chest flys, but not with one machine. Hope this helps

[@StewartPattison]

@MirafitOfficial okay thanks for that

[@dg1786]

Any advice for a good lubricant?

[@MirafitOfficial]

a 3 in 1 oil or other silicone lubricants would be fine for this.

[@TontosVotanPaSocialistas]

No reviews about this product. How reliable it is.

[@MirafitOfficial]

Hi Mr. Max There are plenty of customer reviews on our website mirafit.co.uk/mirafit-wall-or-rack-mounted-cable-pulley-machine.html I hope this helps answer any questions you have.

[@kailashgogoi2749]

How much rate

[@Walsh213]

I cannot tell you how frustrating it is to spend hours putting this thing together and to find out that the 'adjustment rail' needs to be put in a certain way. (1.04 in the video) Of course, I installed it upside down, because I thought it was symmetrical. So, now I have to take the entire thing apart and flip it around, then put everything back in place. Why don't you mention this in either the manual or the video? (yes, I can still use the pulley, but it won't fit in the highest pin, and the lowest pin is too high)

[@marvinclaros6843]

Quiero una para Guatemala centro América

[@MirafitOfficial]

Lo sentimos, actualmente no realizamos envíos a Guatemala. Tal vez algun dia.

[@harmeshsingh108]

Price

[@Rickai85]

These videos are so dumb. How about the connector at the end of the rope for caribiners? So many videos forget to include this!!