Mirror LED turn signal /led lights/ peterbilt/ owner operator/ own authority/trucking/camion/chofer

Adding LED lights to the mirrors, Turn signals included. Giving the Peterbilt some light for safety n for looks.

[@michaelweaver9264]

Yeah those look really good. Damn sure easy to see your turn signal now. Big improvement.

[@chris387]

Yup ! I use to have a harder time getting cars to yield..now as soon as I turn on the light they move over ...👌 totally worth it

[@notoriousfilms7798]

@@chris387 I put some on my Honda Civic si but they are general grand

[@kenwoodlam4759]

Nice. I want to put those on my freightliner too.

[@chris387]

They look nice n help a lot, cars see it right away

[@kenwoodlam4759]

@@chris387 I took out the door panels and ran the wires to the mirror. I put 3 blue lights on side and one on the mirror. I drilled a hole about 1/2 inch. They are eagle eyes blue lights off eBay for $2.50 each. But I’m kinda iffy about them being a bit too bright and blue. In California I heard trucks can not have blue lights but I’ve seen so many trucks with all kinds of colors and bright as rock lights. Stupid California laws. Lights on a semi help with safety idk why it’s not allowed. Anyway thanks for the video you posted. Take care.

[@chris387]

@@kenwoodlam4759 O ok! Must look nice the good thing is that you did the wiring in case California dot says something u can unplug em n plug amber. Yeah i herd CA dot is strict af. Supposedly IL has the same rules about light but i dont think its enforced bcus like you said I see em all the time in other trucks lol

[@markopolo286]

Helluva addition

[@chris387]

🤙

[@geoffreymorgan275]

Would have like to see mirror and door panel removal

[@chris387]

My bad .. just a few screws, I'll be removing them again soon to install keyless entry .. its going to be a few videos from now .. ill record the panel removal

[@carlostovar5887]

Sube un video de cómo instalaste el volante en tu camión 😉 saludos ✌🏼

[@chris387]

Si mas delante, Pienso poner otro y are un video

[@luisq825]

Very helpful video, thank you for sharing

[@chris387]

I'm glad it helps, thank you for watching ✌

[@robertfrank676]

I just put some of these on my Kenworth T 680 can’t find where the hell to wire them into though for turn signals sucks any hints??

[@chris387]

I wired them to the light on the side of the sleeper

[@robertfrank676]

@@chris387 my truck doesn’t have a light on the side of the sleeper I’m jus trying to find where the hell to wire it to so it’ll be a turn signal as well

[@chris387]

@@robertfrank676 idk i would say to the turn signal wire that goes to the taillight maybe..

[@robertfrank676]

@@chris387 I got it figured out thank you though appreciate you getting back to me I hate these newer trucks

[@chris387]

@@robertfrank676 Awesome 👍.. These lights will help a lot when trying to merge to another lane.

[@SerbKing1389]

Bro please tell me what did you connect the wires to. Directly to the battery or to a harness? And can I connect the turn signal wire directly to the turn signal wire by the headlight?

[@chris387]

I connected everything it to the turn signal light in the middle of the cab. What ever that light does is what the mirror lights do. Just what I wanted, so they work for hazard, regular, turn signal.

[@SerbKing1389]

@@chris387 thank you so much for replying! I tried connecting a 4 inch round led turn signal but it would not light for some reason

[@chris387]

@@SerbKing1389 The wires in the truck may not be the same current as the ones in the bulb even tho they may be the same color. Change em around maybe they'll light up

[@TruckDriver326]

nice what size 1/4 fender to have

[@chris387]

34inch

[@TruckDriver326]

@@chris387 that what I ordered

[@chris387]

@@TruckDriver326 Nice ! They'll look 🔥

[@tubeup]

Do you know what size drill you make the hole?

[@chris387]

I dont remember the size

[@tubeup]

When you’re not using your blinker does your blinker light stay on like a marker light ? if not would i have to run it to the headlight(blinker) instead of the side faring blinker, if i want it to stay on and blink. Just for more visibility at night

[@chris387]

@@tubeup It works as a market light as well. If your side bliker on the fairing doesnt work as marker light then yes I would run it to headlight blinker.

[@roadhouse72able]

How did you remove mirror caps?Nice job BTW....

[@chris387]

I removed the trim with the small mirror on the bottom, then the main mirror..it has a small clip I moved out n up so mirror came off n the shell has 4 screws behind where the mirror goes (the main mirror). Give it a try if n let me know

[@roadhouse72able]

@@chris387 you are the🐐 Thank you Brother,stay safe and Happy Easter to you and yours

[@chris387]

@@roadhouse72able You're welcome ! Anytime ! ... Happy Easter to you too 👍

[@Faithful2TheBay]

Are those 3 or 4 inch round ??

[@rodricvidal2370]

Si puedes dejar el link de esa luz.

[@chris387]

Claro que si, es la que prende verde, pondre el link de la regular tambien www.raneystruckparts.com/dual-revolution-round-double-face-leds-with-reflector/ www.raneystruckparts.com/amber-red-round-double-face-led-with-reflector/

[@mannygee1528]

Hey, what gauge wire did you use to wire them in? They look awesome btw

[@chris387]

Thanks ! I used 18gauge

[@mannygee1528]

@@chris387 thank you!

[@chris387]

@@mannygee1528 anytime 👍

[@franciscotorres1220]

Very messy

[@chris387]

Ok